Total Renovation of Balance Toilets including replacement of C.I. DUCT Pipe with PVC pipe in Judicial Complex at Jagadhri in Yamuna Nagar District

Amount

Dismantling white or Coloured Glazed tiles. (to be carefully removed) (HSR 8.38) (Groound floor.)

Scraping : (c) Cement Plaster (HSR 8.32- c)

Laying and fixing Granite stone in all shades, 15mm to 18mm thick in flooring laid in any pattern as specified over base of 20mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of granite stone excluding the cost of granite stone. (N.S)

Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S. 15622 (thickness to be specified by the manufacturer) of approved make in all colors, shade except, burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shade complete. (HSR 14.92) b) Size of ceramic glazed tiles 300mm x 450mm

12 mm thick cement plaster 1:4 (HSR 15.5)

Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get and even and smooth finish including cost and carriage of all material, labour charges, scoffolding, sundries etc. complete (J. K./ Birla Make) (HSR 16.81)

Painting two coats with ready-mixed exterior paint in all shades on newly plastered or concrete surface of walls inculiding.Preparation of plastered or concrete surfaces for painting, including sand papering the surface, applying one coat of linseed oil & filling with approval quality filler, consisting of white lead, linseed oil, varnish & chalk mitti including finishing surface to the required finish, complete.(16.24+16.25+16.26)

Removing of door and windows (wood and Steel) with chowkats by making recesses in walls when the wall is not to be dismantled. (HSR 8.18) (a) Door

Ventilators

Pressed steel sheet frames (chowkats), consisting of 2mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D specifications, including bolts for fixing stops, locknotch , provision for receiving tower bolts & finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame, cement concrete 1:3:6 for lugs complete:-(HSR 18.34) b) Door & window frame of size 76 mm x 38 mm with 35 mm wide single rebate

Factory-manufactured solid flush door shutters, with block board core as per I.S. No. 1659-1969 bonded with water proof type phenol formaldehyde synthetic resin, hot- pressed, conforming to I.S 2202 Part-I & II, fixing in position, including iron hinges, screws, chocks/ cleats, stops etc., complete (excluding the cost of any fittings, other than specified above, but including labour for fixing the same in position)- (HSR 17.93) (iii) (a) Commercial veneering with vertical grains or cross bands & face venner on both sides commercial facing with laminated core & lipped edges:- (iii) 35mm

Painting two coats including priming coat and preparation of surface with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade (HSR 16.3+16.2+16.1)

Public Health work Providing & fixing PVC pipe (4kg/cm2) duly slotted IS-4985:1988 including cost of adhesive, carriage, loading, unloading etc. complete in all respects to the satisfaction engineer incharge. Make:- Supreme, Diplast or any reputed make as approved by Engineer-Charge 15mm diameter

20mm diameter

Providing for fixing and jointing union couplings in G.I. and W.I. pipelines. [NS]. 15mm internal diameter of pipeline

20mm internal diameter of pipeline

Labour for fixing G.I. or W.I. pipe sleeve pieces in holes in walls, floors, and roofs rounds pipes including all cutting and wastage. [HSR 28.27].

Providing & Fixing in position best Indian make (to the approval of the Engineer-in-charge). Indian orissa or orya water water closet suite for sinking into floor, with raised foot treats complete with 100 mm H.C.I.'P' trap with or without vent as required and all other necessary fitting as fully described. (b) Size 630 mm (ii) Single Colour. (Make Hindware) [HSR 30.2 (b) (ii)].

Providing and fixing in position best indian make (as approved by the engineer-in-charge European type water closet suite, syphonic type consisting of- (i) VITREOUS CHINAWARE SYPHONIC SUITE WITH 15 LITRES CAPACITY MATCHING CHINAWARE CISTERN and all internal brass fittings COMPLETE WITH ‘P’ or ‘S’ TRAP with or without vent; (as approved by the Engineer-in-charge). (ii) One piece SEAT AND LID IN HOLLOW BLACK OR WHITE PLASTIC fitted with chromium plated hinges and rubber buffers, (to the approval of the Engineer-in-charge) COMPLETE in all respects INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS. (b) Double trap syphonic (ii) Single Color. [HSR 30.5 (b) (ii)].

EXTRA OVER item nos. 30.1 to 30.4 and 30.6 FOR PROVIDING AND FIXING 15 LITRES CAPACITY C.I. LOW LEVEL VITREOUS CHINAWARE CISTERN complete with flush bend all other necessary Fittings instead of C.I high level cistern complete with fittings. (i) White. [HSR 30.12 (i)].

EXTRA OVER item nos. 30.3 to 30.6 FOR PROVIDING AND FIXING BEST INDIAN MAKE PLASTIC HYGENIC SEAT with lid complete instead of hollow Black or white plaster seat and lid.(i) White plastic seat (Solid). [HSR 30.13 (i)].

EXTRA FOR providing and fixing 32MM dia G.I./C.P FLUSH PIPE complete with accessories instead of 32MM dia galvanized telescopic flush pipe with clips (as required by the Engineer-in-charge). (i) 32 mm dia G.I. flush pipe. [HSR 30.15 (i)].

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE FLAT BLACK OR ANGULAR LIPPED FRONT URINAL 465 MM HIGH consisting of:- (i) flat black lipped or angular urinal basin of VITREOUS CHINA WARE (to the approval Of the Engineer-in-charge)(i) White. [HSR 30.19 (i)].

Providing and fixing 25 mm thick marble partitions for different type of urinals. (HSR 30.40).

PROVIDING AND FIXING IN POSITION 32 MM DIA G.I. WASTE PIPE EMBEDDED IN WALL or lead waste pipe (weighing 3.47 kg. per metre and 2.8 mm thick) upto floor Level including cost of wipped solder joint etc., complete (as required by the Engineer-in-charge). [HSR 30.48].

Providing and fixing in position best Indian make chromium Plated brass Bottle trap 32 mm dia metre. complete (as required by the Engineer-in-charge). [HSR 30.50]

Providing & fixing in position best Indian make bevelled edge 5.5mm thick mirror mounted on absetos sheet ground fixed in postion by means of 4 Nos. chromium plated brass screws and washers over rubbers washers and rawl plug embeded in the wall or chromium plated brass clamps with C.P. brass screws (as required by the engineer-in-charge) complete including cutting and making good the walls etc. (a) Indian Make (i) 600mm x 450mm. [HSR 30.71 (a) (i)].

Providing and fixing in position 15mm i/d C.P. brass bib cocks of best quality (as required by the Engineer-in-charge). [HSR 30.75]. (a) Bib cock long body.

Providing & fixing in position C.P. brass stop cock (as approved by the engineer-in-charge). (a) 15mm Stop cock. (ii) Concealed stop cock with flange. [HSR 30.76 (a) (ii)].

Providing and fixing in position best Indian make flexible tube connection. (b) C.P. Brass (iii) 15mm x 450mm. [HSR 30.82 (b) (iii)].

Providing and fixing PVC Rain water pipe 6Kg. Pressure of ISI mark in cement mortar during masonary work. (HSR 13.89) 150mm dia PVC pipe 6 Kg. Pressure.

Providing and fixing PVC Bend ISI mark (HSR 13.90) 150mm dia PVC Bend

G.I Pipe 2" 50mm Dia At terrace)

G.I. Elbow 2"

G.I. Socket 2"

Unoin 2"

PVC pipe 3"

PVC. Bend 3"

Socket 3"

PVC Tee 6"

PVC Tee 3"

PVC socket 6"

PVC socket 3"

jitender kumar