Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.2 LAccepted-AOC | 1 | Accepted-AOC LEAST QUATED | |
| 2 | Rejected-Technical | - | Rejected-Technical HIGH QUATED |
| Sl No | Description | Qty | Unit | ROOPESH O R L1 | VISHNU K L2 |
|---|---|---|---|---|---|
| 1.00Building Maintenance | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 0.36 | cum | 359 ₹129.24 Lowest | 370 ₹133.2 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.36 | cum | 9,235 ₹3,324.6 Lowest | 9,250 ₹3,330 |
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 57.6 | kg | 178 ₹10,252.8 Lowest | 180 ₹10,368 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 303.2 | kg | 194 ₹58,820.8 Lowest | 200 ₹60,640 |
| 1.00 | OD221000/2025-2026:51.20. Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required | 44 | sqm | 621 ₹27,324 Lowest | 650 ₹28,600 |
| 1.01 | OD220999/2025-2026:Supplying and fixing Square UPVC gutter 200 mm size, with MS plat 25 mmx 5 mm size @60 cm C/C fixing on roof members(Purlins or rafters), bolts, nuts and washers etc. including making necessary connection with rain water pipes etc. complete. | 22 | 1 meter | 825 ₹18,150 Lowest | 850 ₹18,700 |
| 1.01 | 15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below | 1 | each | 379 ₹379 Lowest | 390 ₹390 |
| 1.01 | 50.9.3.3:Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows, 30 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding paneling which will be paid for separately, all complete as per direction of Engineer-in -charge. using vengai wood | 1.45 | sqm | 2,638 ₹3,811.91 Lowest | 2,700 ₹3,901.5 |
| 1.01 | 50.9.4.3:Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows ( Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick using good quality Vengai wood | 0.58 | sqm | 2,232 ₹1,290.1 Lowest | 2,250 ₹1,300.5 |
Tender Value
₹1.3 L
EMD Value
₹3,172
Closing Date
10 Sept 2025, 5:00 pmClosed
LINTA C K
LID EW CHALISSERY
Annual Plan-Chalissery GP Pro No 10626 Palakka Peedika anganwadi -Naveekaranam ward 2-General Civil Work
2025_LSGD_792480_1
30/2025/AE/LIDEW/CHY PHASE
Open Tender
Civil Works - Roads
Item Rate
LID EW CHALISSERY
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹3,172
Yes
5 Nov 2025
29 Aug 2025
12 Sept 2025
29 Aug 2025
10 Sept 2025
29 Aug 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1307726.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .