Materials required for SGS Colleges, Srinivasa & Padmavathi Kalayanamandapams & PAT outside temples etc., in PAT Section in WW-I sub division, Tirupati for the year 2026-27

Supply of following dia Gunmetal Gate (GM peet) Valves as per IS - 778 class -I Indian make heavy type of the following NB sizes

Supply and fixing 12.7 mm dia NP push cock 1st quality

Manufacture, supply and delivery of HDPE (PE-100 grade) following dia MS Flanges confirming to IS 4984-2016 including trasportation to any work in AP, excluding all taxes

OD 110 mm dia MS Flanges

OD 75 mm dia MS Flanges

OD 50 mm dia MS Flanges

Supplying & fixing leather washers for 12.7 mm bib tap and stop cock

Supply of PVC /cotton tape Role (8 Mtrs)

Supply of GI plug of following series

Supply of SYMET BIB COCK (CAT.NO:121) Standard 15 mm size as per IS 9763-2000 with ISI mark male thread with deluxe handles,86 mm long and 102 mm high and 43mm breadth 12mm seat dia and replaceable washers, having approx. weight of 90gms.

Supply of CPVC pipes, SDR 13.5 (class 2) following dia

Supply of CPVC fittings following

Elbow 90 degrees following dia

Reducer Elbow 90 degrees following dia

Tees following dia

Coupler (Reducing Bush) following dia

Union following dia

End Cap following dia

Tank Nipple following dia

Reducer Coupler following dia

Reducer Tees following dia

25 mm X 25 mm X 20 mm

32 mm X 32 mm X 20 mm

32 mm X 32 mm X 25 mm

40 mm X 40 mm X 20 mm

40 mm X 40 mm X 25 mm

40 mm X 40 mm X 32 mm

50 mm X 50 mm X 20 mm

50 mm X 50 mm X 25 mm

50 mm X 50 mm X 32 mm

50 mm X 50 mm X 40 mm

Bushing following dia

Elbow 90 degrees (Brass) following dia

Tee (Brass) following dia

20mm x20mmx20mm dia

25 mm X 25mm X 20 mm

25 mm X 25 mmX25mm

Male Adapter Brass Threaded - MABT following dia

Reducing Male Adapter Brass Threaded - MABT following dia

Female Adapter Brass Threaded - MABT following dia

Ball Valve following dia

Power Coated Metal Clamp following dia

1 step CPVC Cement following dia

Supply of following GI Hex nipples of ISI marked / Approved make

Supply of following G.I. Couplings (socket) of approved make/ISI mark

Labour charges for Cutting of GI pipes

Labour charges for Threading of GI pipes

Supply of Plastic storage tank lid with hinges

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2" SDR 11 pipes are made from identical CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007).

15.90mm O DPipe - SDR 11

22.20mm OD Pipe - SDR 11

28.60mm OD Pipe - SDR 11

34.90mm OD Pipe - SDR 11

41.30mm OD Pipe - SDR 11

54mm OD Pipe - SDR 11

Supply of following Gun metal (GM) Ball valves with SS Ball and SS spindles as per IS class-1 Indian make heavy type

Manufacture, Supply and Delivery of Unplasticised 180 mm dia PVCs Pipes of 6 Kgs/cm2 for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in AP excluding all taxes.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank of Double layer Roto moulded confirming to lS:12701 approved brand & manufacture with suitable cover/cap and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks.

Supply of ready mixed Synthetic Enamel paints in all shades Gr-I having VOC(volatile organic compound) content less than 50 grams / lit

Supply of Turpentine

Supply of following dia G.I. pipes of "B" class of ISI marked and approved by the department including cost and conveyance and all other incidental charges etc., and properties and weight as per IS 1239 marked (TATA make)

Removing old G.I./ P.V.C./ H.D.P.E. Pipes and Specials / Fittings and clearing scraping the pipes, hoisting and keeping within 50m lead but excluding earth work excavation of trenches and refilling - above 40 mm dia

supply and fixing angle stop cock 12.7mm (1/2")dia first quality Indian make heavy duty.(400 grms)

Supplying & fixing Gunmetal (GM) Vertical Check (Non return) Valve as per IS-778 I-class heavy duty - 50 mm NB Size

Supplying & fixing Gunmetal (GM) Vertical Check (Non return) Valve as per IS-778 I-class heavy duty - 40 mm NB Size

Supplying & fixing Gunmetal (GM) Horizontal Check (Non return) Valve as per IS-778 I-class heavy duty

Supply and Transportation of ………..,5star rated submersible motor pump set, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply, etc complete for 6" Bore well. Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi/ PSG/ ARYEN VARSHA /Falcon/Prithvi

3.00HP 5-10 Stage

7.50HP, 12-16 Stage

Supply and Transportation of 1.50HP 21 Stage,5star rated submersible motor pump set, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 240V ± 10% , Single Phase 50 Hz AC supply, etc complete for 4" Bore well. Makes: Pluga / Sterling / Kumar / Unnati zen/Duke/Lada/Ellen/ Suguna /UNItek /KSP(Karunya) /Anco/Sabar/Fitwell/Deccan/Karvel / SILVER/Samudra/ Acube(SS-Deluxe)/ JEROME PUMPS

Supply and Transportation of 1.0HP (25x25mm) Single phase Mono block CI body motor pump set confirms to IS 9079:2002 Makes: Kirloskar / Crompton / Texmo / CRI / KSB/Lubi / Havells Hi-flow V2 / PSG/ ARYEN VARSHA /Falcon

Supply and Transportation of 1.00HP Single phase open well ISI submersible motor pump set confirms to IS 14220 : 1994 Makes: Pluga / U-Neel / Sterling / Kumar / Unnati zen/Duke/LDK/Ellen/ Suguna/UNItek /KSP (Karunya) / Anco/ Sabar/Fitwell/Deccan/Karvel/ SILVER/ Samudra /Acube

SYMET PUSH COCK 20 mm(CAT.NO:136)with (3/4'') 20 mm B.S.P female threads spout 100 mm long and 57 mm high and 33mm breadth 12mm seat dia and Spindle movement of minimum 5mm having approx. weight of 75gms.

50mm dia G.I.long couplings of approved make/ ISI mark.

Supplying of stainless steel sink size 20" x18" x 8" (508x457.2x203.2mm) 1 mm thick with accessories

Supplying & Fixing 12.7 mm PVC connection with brass union nut C.P coated