Building Repairing And Renovation Work of Diffirent Muni. Building At Bopal-Ghuma area and Diff. places of Thaltej Ward In North West Zone. (A.R.C.)

Name of Work:- Building Repairing And Renovation Work of Diffirent Muni. Building At Bopal-Ghuma area and Diff.

places of Thaltej Ward In North West Zone. (A.R.C.)

Sr.No Oty. Item Description Rate Unit Amt.Rs.

Excavation for foundation up to1.5 m depth including sorting

out and stacking of useful materials and disposing of

1 theexcavated stuff upto 50 Meter lead.(A) Loose or soft

soil (R & B S.O.R 2023-24 I.no. Item Code 04001A)

40 Upto 1.5 mt Depth 115.92 Cmt

10 1.5 to 3.0 mt.depth 128.52 Cmt

Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers not

2 41 exceeding 20 cm. in depth consolidation each deposited 129.10 Cmt

layer by ramming and watering.

Providing and laying cement concrete1:5:10 (1-

Cement: 5- coarses sand and:10-hand broken stone

3 5 aggregates 40mm nominal size) and curing 2492.51 Cmt

complete excluding cost of formworkin (A) Foundation and

Providing and laying cement concrete1:4:8 (1-Cement:

4- coarses and:8 hand broken stoneaggregates 40mm

4 7 nominal size) and curing complete excluding cost of 2653.67 Cmt

formworkin (A) Foundation and Plinth

Providing and laying cement concrete1:3:6 (1-

Cement: 3- coarses sand and:6-hand broken stone

5 7 aggregates 40mm nominal size) and curing 2976.00 Cmt

complete excluding cost of formworkin (A) Foundation and

Providing and laying cement concrete 1:3:6 (1-

Cement:3-coarse sand:6-crushed stone aggregates

6 7 20mm nominal size) and curing complete including cost of 4006.15 Cmt

formwork in (A) wall caps/coping

Providing and laying cement concrete work 1:2:4 ((1-

Cement:2- coarse sand:4-graded aggregates 20mm

7 nominal size) curing complete excluding cost of

formwork and reinforcement.

Foundations, footings, base or columns and mass

a 10 concrete 3923.53 Cmt

Slabs, landing, shelves, balconies, lintels, beams, girders

b 10 and cantilivers upto floor two level 4012.47 Cmt

Independent piers, columns, and pillars, upto floor two level

Provdg. & laying cement concrete 1:2:4 (1 cement : 2 coarse

sand : 4 graded stone aggregates 20 mm nominal size)

for reinforced concrete chhajjas not exceeding 10 cm.

thickness upto floors two level including finishing

8 7 the exposed surfaces with cement mortar 1:3 (1 cement : 6487.07

3 find sand) to give a smooth and even surface centering and

form work and curing complete excluding cost of

Providing and laying controlled cement concrete /

Ready Mix Concrete of M-200 and curing complete,

9 excluding the cost of form work and reinforcement for

reinforced concrete work in:

Foundations, footings, base of columns, and mass

(A) 5 concrete. 3977.88

Walls from top of foundations /level up to floor Two level.

Slabs,landing,shelves,Balconies Lintels, Beams, Girders and

(C) 5 Cantilever upto floor 4460.36

Columns, pillars, posts, and struts, up to floor two level.

Staircase up to floor two level. (excluding landing)

Vertical and horizontal fins up to floor two level.

Providing and Laying ordinary cement concrete 1:2:4

(1-Cement 2-coarsesand: 4-graded stone aggregates

mm nominal size) and finishing smooth with curing etc.

10 1 complete including the cost of form work but excluding the cost 6241.78 Cum

of reinforsement for R.C.C work in (iv) Slabs having more

than 13 cm and upto 15 cm.thickness

Providing and Laying ordinary cement concrete 1:2:4

(1-Cement 2-coarsesand: 4-graded stone aggregates

mm nominal size) and finishing smooth with curing etc.

11a 1 complete including the cost of form work but excluding the cost 7401.59 Cum

of reinforsement for R.C.C work in (iv) Slabs having more

than 8 cm and upto 10 cm.thickness

Brick work using common burnt clay building bricks

having crushing strength not less than 35kg./Sq.Cm.in

12 foundation and plinth in Cement Mortar1:6 (1-Cement

:6 - fine sand)

15 (A) Conventional (upto 10 ton) 3981.21 Cmt

12 B) Modular 4241.70 Cmt

Extra Rate for brickwork in Above Item for super

13 structure above plinth level upto floor two level (B)

a 5 (A) Conventional 272.25 Cmt

b 5 B) Modular 262.35 Cmt

C) above floor two level Item No. 2(6.13) (A) Modular Per

D) above floor two level Item No. 2(6.13) (B) Conventional Per

Providing and laying in position Ready Mixed M250 grade

concrete for reinforced cement conctere work , using cement

content as per approved Design Mix manufactured in fully

automatic batching plant and transported to site of work in

transit mixer for a lead up to 10 kms having continuous agitated

mixer, manufactured as per mix design of specified grade for

reinforced cement concrete work including pumping of R.M.C.

from transit mixer to site of laying, excluding the cost of

13a 10 centering shuttering finishing and reinforcement including cost 4853.56 Cmt

of admixtures in recommended proportions as per IS: 9103 to

accelerate/ retard setting of concrete, improve workability

without impairing strength and durability as per direction of the

Engineer - in - charge. Without Fly Ash (Min cement level as

per latest IS 456 shall be maintained) (Cement level 450 kg )

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in

14 25 Cement mortar 1:5 ( 1-Cement : 5 coarse sand ) in 583.49 Smt

foundation and Plinth conventional brickwork

Extra for half brick masonry in super structure above

15 20 plinth level upto floor two level (B) conventional 52.80 Smt

Providing form work in ordinary timber planking so as to

give a rough finish including centering, shuttering, strutting

and propping etc. height of propping and centering

16 below supporting floor to celling not exceeding 4 M &

removal of the same for in situ reinforced or plain

concrete work upto floor four level

Foundation, footings, bases of columns etc. and mass

a 40 concrete. 171.68 Smt

(B) Flat surfaces such as soffits of supspened floors slabs

b 30 Landings and the like. (1) Floors etc. upto 200 mm in thickness. 252.00 Smt

(B) Flat surfaces such as soffits of suspended floor roof slabs

c 30 Landings and the like. (2) Floors etc. above 200mm in 270.90 Smt

Vertical surface such as walls (any thickness) partitions and the

d 30 like including attached buttresses & string course & the like. 229.95 Smt

(ii) Sides And Soffits Of Beam, Haunchings Cantilevers,

e 50 Girders, Bressumers And Lintels Not Exceeding 1 M In 192.15 Smt

(G) Columns PillarsPosts and struts. (1) Square Rectangular

f 40 Polygonal in plan. 297.68 Smt

g 40 (2) Circular or curved in plan. 422.10 Smt

(H) (2) Sides and soffits of Beams Beam Haunchings canti-

h 40 levers Girders Bressumers and Lintels exceeding 1M.in Depth. 259.88 Smt

Providing and fixing 35 mm thick panelled, glazed or

panelled and glazed shutters for Doors windows and clear

17 story windows including anodised alluminium But hinges

with necessary screws and indian teak wood shutters with.

a 3 (A) Plywood sheet panels. 3459.09 Smt

b 3 (B) Particle board panels 3464.51 Smt

c 2 (C)Hard board panels. 3433.65 Smt

d 2 (D) Asbestos sheet panels. 3406.53 Smt

Providing and fixing 25 mm thick shutters for cup

boards etc. including black enamelled M.S. butt hinges

18 2 with necessary screws.(A) Indian teak wood. (i) Fully 3006.75 Smt

Providing and fixing 25 mm thick shutters for cupboards etc.

a 2 including anodised alluminiu butt hinges with necessary 3006.75 Smt

screws. (A) Indian teak wood. (ii) Fully Glazed.

Providing and fixing 25 mm thick shutters for cupboards etc.

including anodised alluminiu butt hinges with necessary

b 3 screws. (A) Indian teak wood. (ii) Partly panelled and partl 2814.42 Smt

Providing and fixing M.S. grills of required pattern to

wooden frames of windows etc. with M.S. flats at required

19 100 spacings and frame alround, square or round bars with 100.17 kg

round headed bolts and nuts or by screws (A) Plain Grill.

Providing and fixing glazed louvered glass

windows and ventilators with teak wood frame 10 cm. x

20 3 7 cm. size including 3 coats of oil painting to wood work 4102.54 Smt

Providing and fixing glazed louvered glass

windows and ventilators with teak wood frame 10 cm.x7

21 3 cm. size including 3 coats of oil painting to wood work 4332.47 Smt

etc.complete.with wooden louvers plank 12mm thick

Providing and fixing 35 mm thick shutters for Doors,

windows and clere story windows including Indian teak

wood frames 10 cm x 7 cm. size including anodized

22 6 alluminium fixtures and fastenings including primer coat of 4595.06 Smt

approved quality and two coats of oil painting etc, complete.(ii)

Providing and fixing 35 mm thick shutters for Doors,

windows and clere story windows including Indian teak

wood frames 10 cm x 7 cm. size including black enamelled iron

23 3 oxidixed fixtures and fastenings including primer coat of 5285.45 Smt

approved quality and two coats of oil painting etc,

complete.(ii) Fully Panelled.

Providing and fixing 35 mm thick shutters for Doors, windows

and clerestory windows including Indian teak wood frames

cm x 7 cm. size including anodized alluminium fixtures and

a 4 fastenings including primer coat of approved quality and two 4940.25 Smt

coats of oil painting etc, complete. (iii) Partly panelled and

Providing and fixing 30 mm thick FACTORY MADE SOLID

PANEL PVC DOOR SHUTTER consisting of frame made out

of M.S.tubes of 19 gauge thickness and size of 19 mm x

mm for stiles and 15 mm x 15 mm for top and bottom rails.M.S.

frames hall have a coat of steel primers of approved

make and manufacture, M.S. frames hall be covered with

mm thick heat moulded PVC ‘C’ channel of size 30 x

mm formings tiles, and 5 mm thick 75 mm wide PVC sheets

for to prail, lock rail and bottom rail on either side, and 10 mm

(5 mm x 2) thick, 20 mm wide cross PVC sheet as gap

24 5 insert for top rail and bottom rail, Panelling of 5 stiles and 1135.02 Smt

rails with 30 mm wide x 5 mm thick PVC sheet beading

on eighter side, and joined together with solventcement

adhesive,. An additional 5 mm thick PVC strip of 20 mm width

is to be stculkon the interiors side of the ‘c’ channel using

PVC solvent cement adhesive etc. complete as per

direction of Engineer incharge, manufacture’s

specification and drawing.

Providing and fixing in position collapsible steel

shutters with vertical channels 20 x 10 x 2 mm braced

with flat iron diagonal 20 x 5 mm size with top and bottom

rails T iron 40 x 40 x 6 mm with 38 mm dia steel pulleys

complete with bolts, nuts, locking arrangements, stoppers, Sq.M.

handles, including a priming coat of red lead paint &

Providing and fixing 1 mm thick M.S. sheet sliding

shutters with frame and diagonal braces of 40x40x6 mm

angle iron, 3.15 mm M.S.gusset plates at Junctions and

corners 25 mm dia. pulley, 40x40x6 mm angle

26 3 and T-iron guide rail at top and bottom respactively 3652.12 Sqm

with handles, stoppers and locking agangement etc,

including applying a priming coat of red lead paint.

Providing & Fixing in position Alluminium doors with frame

using approved quality anodised extruded alluminium

section as approved by Engg.in charge(Jindal

alluminium) (a) Frame sections 101.6x44.45 mm (b) Shutter

bottom vertical & top section 83.5x44.45 (wt.1.31 kg/mt.)(at

1.31 kg/mt) (c) Shutter bottom section at 114.3x44.45

mm at (1.37kg/mt) Shutter middle section at 100x44.3

27 5 wt.(1.37 kg/mt) incl.providing & installing 5 mm thick 2900.00 Smt

approved color Acrylic sheet of standard quality fixed

with glazing chips on upper pannel & Laminated sheet on

lower pannel (wtt.0.13 kg/Rmt) etc.comp.as direction

of engg.in charge.(N.S.)

Providing and fixing extruded aluminum window having

extruded aluminum Colour r Powder Coated section frame

main outer size 127mm x 38.10mm x 1.35mm ,@ Wt.1.384

Kg/mt,horizontal Four track member size 122.20mm x

31.75mm x 1.10mm @ Wt. 1.205 Kg/mt,vertical member of

size 122.20mm x 31.75mm x 1.50mm ,@ Wt. 1.398 Kg/mt with

sliding shutters of horizontal member size 40mm x 18mm x Sq.

28 1 1.29mm @ wt.of 0.456Kg/mt,vertical member of size 40mm x 2119.14

18mm x 1.29mm @ wt.of 0.456Kg/mt,@ with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc complete for window.

Providing & Fixing in position Alluminium vents with frame

using approved anodised extruded alluminium section as

approved by Engg. In charge.(Jindal alluminium)

units equivalent Approved Rate)Frame section of 63.50 x

29 2 38.50 mm. (wt. 0.68Kg/Rmt) incl. Providing & Installing 5 1950.00

mmthick approved color Acrylic sheet of standard

quality etc. comp.

Providing and fixing standared extruded of alluminium

section of size 63 mmx38.10 mmx1.2 mm (Jindal

Section:2434, or equivalent @ Wt.0.643 Kg/mt) with Sq.

30 3 colour anodized alluminium frame for ventilation with 5 1163.92

mm thick frosted glass as details etc complete for Ventilation

Providing and fixing standared extruded of alluminium section

of size 63.50 x 38.10 x 1.95 mm,@ Wt 1.094Kg / Rmt with

31 5 colour Powder Coated alluminium frame with 5 mm thick 2141.88

transparent bronze colour tinted float glass as details etc Sq.M.

complete for Fix Partition

Providing and laying 40 mm thick marble chips flooring

rubbed and polished (I.E.terrazo) to granolithic finish with

under layer 30 mm thick cement concrete1:2:4 (1-Cement: 2-

coarse sand: 4-graded stone aggregate 10 mm and

down gauge) and to player 10 mm thick with white, black or

white and blak marble cihps of required sizes from 1 mm to

32 5 mm nominal size laid in cement marble powder mix 3:1 (3- 811.13 Sqm

Cement:1-Marble powder by weight) in proportion of

4:7 (4- Cement: 7-marble chips by volume) (C)

Medium Shade pigment with approx 50% white cement

and 50% ordinary cement (In top layer only) (upto 10 ton)

Providing and laying marble chips skirting (Terrazo) or

dedo rubbed, and polished to Granolithic finish to player 6 mm

white, black or white and black marble chips of size

from smallest to 4 mm nominal size laid in cement marble

33 5 powder mix 3:1 (3-Cement: 1 marble powder by weight) 869.40 Sqm

in proportion of 4:7 (4-cement marble powder mix: 7-marble

chips by volume) (B) Light shade pigment with white cement (In

top layer only)

Providing and laying white glazed tiles 6mm thick in flooring

treads of steps and landing laid on a bed of 12mm thick cement

34 45 mortar 1:3 (1-cement : 3-coarse sand ) finishing with flush 908.17

Providing and laying Ceramic tiles 6 mm thick in flooring

treads of steps and landing laid on a bed of 12 mm thick

35 30 cement mortar 1:3 (1- cement :3-coarses and) finishing with 960.47

flush pointing in white cement.

Providing & Fixing 20 mm thick Mirror Polished Decorative

Granite Board with Computerised Golden Letters

36 5 Discription as per instructions of engg. in charge to 4304.00 No.

M.S. frame structure for Inaugaration & Public

Handover Function (N.S.)

Providing and laying Vitrified tiles 8 to 10 mm thick, 36''x36'' in

flooring treads of steps and landing laid on a bed of

37 20 mm thick cement mortar 1:3 (1-cement:3-coarses and) 1469.91

finishing with flush pointing inwhite cement. Sq.M.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24''x24'' in

skrting risers of steps and dedo on 10 mm thick cement

38 18 plaster 1:3 (1- cement: 3-coarse sand) and jointed 1130.15 Sqm

with white cement slurry

Providing and laying Vitrified tiles 8 to 10 mm thick, in skrting

risers of steps and dedo on 10 mm thick cement plaster

39 25 1:3 (1-cement:3- coarse sand) and jointed with white 1523.61 Sqm

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24''

in flooring treads of steps and landing laid on a bed of 12mm Sq.

40 25 thick cement mortar 1:3 (1- cement : 3-coarse sand ) finishing 1062.50

with flush pointing in white cement.

Providing and laying 24" x 24" vitrified 8 to 10 mm

th.Double Charged Gloosy / Matt tiles of Approved make

as Approved by Adl.C.E. / Consultants for upto 10 cm high

skirting as approved by Engineer in charge over 10 mm

41 25 thick cement mortar 1:6 (1 cement : 6 coarse sand)on new 165.00 Rmt

surface& jointed with colour cement slurry incl with flush

pointing & cleaning the surface etc. comp.

Providing and laying polished Kota stone slab flooring over

20 mm (Average) thick base of cement mortar 1:6 (1-

cement:6-coarses and) or L.M.1.1.5 (1-Lime

42 50 putty:1.5-coarses and) laid over and jointed with grey 982.83

cement slurry mixed with pigment to match the shade of Sq.M.

slab including rubbing and polishing etc. complete. (A)

Providing and laying marble stone slab flooring over 20mm

(average)base of cement mortar 1:6 (1-cement : 6 coarse

43 5 sand) or L.M. 1:1.5(1- lime putty : 1.5 - coarse sand) laid and 2194.63

jointed with gray cement slurry including rubbing and polishing Sq.M.

complete. (A) Marble slab 25mm thick

Providing and laying polished Kota stone slab flooring over

20 mm (Average) thick base of cement mortar 1:6 (1-

cement:6-coarses and) or L.M.1.1.5 laid over and jointed

44 30 with grey cement slurry including rubbing and polishing 1085.48

etc.complete. (B) 30 mm thick

Providing and laying polished kota stone slab 25 mm thick in

risers of steps, skirting Dedo and pillars laid on 10 mm thick

cement mortar 1:3 (1-Cement :3 coarses and) and jointed

45 10 with gray cement slury mixed with pigment to match the 1176.03

shade of slab including rubbing and polishing

Providing and laying cement concrete flooring 1:2:4

(1-cement: 2-coarses and:4-graded stone aggregate

46 5 20mm nominal size) laid in one layer and finished with a 297.68

floating coat of neat cement. (A) 40mm thick. Sq.M.

Providing and laying cement concrete flooring 1:2:4

(1-cement: 2-coarse sand:4-graded stone aggregate

47 5 20mm nominal size) laid in one layer and finished with a 348.08

floating coat of neat cement. (B) 50mm thick. Sq.M.

Providing and laying broken china mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glazed tiles to

be laid over cement mortar 1:3 to plain or slope and to be

tempered to bring mortar creme out upto surface using

48 50 white cement including rounding off junctions and 739.89 Sqm

extending them up to15 cm along the wall, clearing with

water and oxalic acid etc.as directed.

Providing and laying coloured glazed tiles of the

size 300 mmx200 mmx8 mm/300 mmx450 mmx8 mm in

49 1 skirting, risers of steps and dedo on 10 mm. thick cement 1426.95 Sqm

plaster 1:3 (1cement: 3 coarse sand) & jointed with

white cement slurry.

Providing ridges or hips 600 mm overall in plain G.I. sheet

class-3 fixed with G.I. J or L Hooks and nuts 8 mm dia

50 1 G.I. Limpet and bitumen washer complete. (1) 0.80 mm thick 635.58 Sqm

Providing and fixing 150 mm wide 450 mm over all semi

circular plain G.I.sheet class-3 gutter with Iron brackets

51 1 mmx3 mm size Bolts, Nuts, washers etc. including 555.71 Sqm

making necessary connection with rain water pipes. (i)

mm thick Sheet.

Providing and fixing five courses water profing

treatment with bitumen felt consisting of second and

fourth course of blown/ bitumen or/and residual

bitumen applied hot at 1.2 kg.per Sq.M.of area for each

course and first course with fibre base bitunen

saturated under lay type land third course with fibre base self

52 1 finished felt type 2 grade 1 and fifth and final course of 466.84 Sqm

stone grit 6 mm and down size or pea sizes gravel

spread at 0.008 Cu.Metre/Sq.metre

preparation of surface excluding grading complete.

Providing and fixing on wall face C.I. Rain water pipe

including filling the joints with spun yarn soaked in neat

53 1 cement slurry and cement mortar 1:2(1- Cement : 2- 283.62 Rmt

fine sand) (A) 75 mm dia.

Providing 15 mm thick cement plaster in single coat on

Rough (Similar) side of single or half brick walls for interior

54 86 plastering up to floor two level and finished even and 174.83 Sqm

smooth in (i) Cement mortar 1:3 (1-cement :3-sand)

Providing 20 mm thick sand faced cement plaster on walls upto

height 10 metres above ground level consisting of 12mm thick

55 80 backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick 297.68 Sqm

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Colour washing with lime on wall surface (two coats)

over and including a primary coat of white washing to

56 23 give an even shade after through brooming the surface to 12.29 Sqm

remove all dirt, dust, mortar drops and other foreigh

Removing dry or oil bound distemper by a

washing and scraping and sand papering the wall

57 10 surface smooth including necessary repairs to 11.19 Sqm

scratches complete.

Distempering with dry distemper of approved brand and

manufacture (two coats) and of required shade on wall

surfaces of given an even shade, over and including a

58 43 priming coat of whiting after thoroughly brooming the 46.94 Sqm

surface free from mortar dropping and other foreign

Distempeing (Two coats) with oil bound distemper of

approved brand and manufacture and of required shade

on wall surfaces to give an even shade, over and

including a priming coat with distemper primer of

approved brand and manufacture after thoroughly

brushing the surface free from mortar dropping and

other foreign matter and also including preparing the

surface even and sand papered smooth.

Extra Coat for Above Item over above for every

60 5 subsequent coat of approved brand and manufacture. 30.09 Sqm

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated

wall surface to give an even shade including throughly

61 60 brushing the surface free from mortar droppings and other 78.44 Sqm

foreign matter and sand papered smooth.

Extra over item for every sub sequent coat of wall painting

62 70 with plastic emulsion paint of approved brand 33.39 Sqm

Extra over item for painting with plastic emulsion paint of

62 a 60 approved brand on ceilings and sloping roofs. 5.36 smt

Applying priming coat over new steel and other metel

surface after and including preparing the surface by

throughly cleaning, oil, grease, dirt and other foreign

63 50 matter and scoured with brushes fine steel wood, scrapers 34.34 Sqm

and sand paper with ready mixed priming paint brushing

Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint, brushing,

64 50 interior to give an even shade including cleaning the surface 86.94 Sqm

an even shade including cleaning the surface of all dirt, dust

and other foreign matter.

Painting one coats (excluding priming coat) on previously

painted steel and other metal surface with enamel paint,

65 55 brushing to give an even shade including cleaning the 54.35 Sqm

surface of all dirt, dust and other foreign matter.

66 25 Extra over item for every sub sequent coat of paint. 50.40 Sqm

Painting two coats (excluding priming coat) on new

steel and other metal surface with synthetic enamel paint,

67 5 brushing to give an even shade including cleaning the 64.66 Sqm

surfaceofalldirt,dust and other foreign matter.

Painting one coats (excluding priming coat) on previously

printed steel and other metal surface with synthetic enamel

68 5 paint, brushing to give an even shade including cleaning 43.79 Sqm

the surface of all dirt, dust and other foreign matter.

Extra over Above item for every sub sequent coat of paint.

Painting two coats (excluding priming coat) on external

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black, anti

70 10 corrosive to give an even shade including cleaning of all 20.16 Sqm

dirt, dustand other foreign matter.(75 mm dia)

Painting two coats (excluding priming coat) on external

surface of new rain water, soil, waste and vent pipes and

fittings with ready mixed bituminous brushing, black, anti

71 10 corrosive to give an even shade including cleaning of all 25.05 Sqm

dirt, dust and other foreign matter.(100 mm dia)

Painting two coats (excluding priming coat) on new

wood and wood based surface with enamel paint, interior

to give an even shade including cleaning the

72 50 surface of all dirt, dust and other foreign matter sand 26.78 Sqm

papering and stopping. (a) Ready mixed paint brushing wood

Painting one coats (excluding priming coat) on previously

painted wood and wood based surface with enamel paint,

73 45 to give an even shade including cleaning the of all dirt, dust 26.78 Sqm

and other foreign matter.(b) Ready mixed paintbrushing

priming for enamel

Extra over Above item for every sub sequent coat of paint.

Painting two coats (excluding priming coat) on new

wood and wood based surface with ready mixed paint,

75 45 brushing, oil, gloss, semi gloss to give and even shade 104.12 Sqm

including cleaning of all dust, dirt and other foreign

matters and papering and stopping.

Finishing wall with weather proof exterior emulsion paint

on wall surface (two coats) to give an required shape

76 50 even shade after thoroughly brushing the surface to remove 113.40 Sqm

all dirt, and remains of loose powdered

materials.etc complete

Applying two coats of Birla (white cement based) or

Asian (acryliclapy-putty) or equivalent & two coats of primer

of approved brand and manufacture on new wall surface

77 35 to give an even shade including thoroughly brushing the 40.19 Sqm

surface free from mortar dropping and other foreign matter

and sand papered smooth.

Painting one coats (excluding priming coat) on previously

painted wood and wood based surface with enamel paint, to

78 40 give an even shade including 55.13

cleaning the of all dirt, dust and other foreign matter. Sq.M.

Writing letter or figures on any surface with black per

japan paint (stops, comas, hyphens and the like not to be letter

79 50 measured and paid for separately) (i) Block 3.15

(Letters/Figures) (Per 10 Letter pet CM.HT) Cm/Ht

Demolition including stacking of serviceable materilas and

80 10 disposal of unserviceable materials with all lead and lift. (i) 1047.38

R.C.C. work Cu.M.

Demolition of Brick work and stone masonry including

stacking of serviceable materil as and disposalof

81 15 unserviceable materials with all lead and lift.(ii) In Cement 544.95

Dismentaling tiled of stone floors laid in mortar including

82 20 stacking of serviceable materil as and disposal of 47.25 Sqm

unserviceable materials with all lead and lift.

Dismentaling of sheet roofing including ridges, Hips,

Valleys, Gutters etc. stacking of serviceable materil as

83 1 and disposal of unserviceable materials with all lead 47.25 Sqm

and lift.(i) G.I.sheet roofing.

Dismentling steel work including distempering and

84 52 stacking the materials with all lead and lift. 2.42 Kg.

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves, hold

85 22 fasts and other attachment etc. complete and stacking 185.85 Each

the material within all lead and lift.(i) Not exceeding 3 Sq.M. in

Dismentling doors, windows, ventilators etc. (wood or

steel) shutters including chowkhats architraves,hold

86 30 fasts and other attachment etc. complete and stacking 248.85 Each

the material with in all lead and lift.(ii) Exceeding 3 Sq.M.in

Dismentling barbed wire in fencing including making rolls

and also including dismentling fencing posts including all

earth work concrete in base and making good the

disturbed ground stacking useful materials as directed

and disposing as directed and disposing of the

unserviceable materials with all lead and lift.

Dismentling C.I. pipes G.S.W. pipes abd A.C. rain

88 30 water pipes with fittings and clamps including stacking the 74.03 Rmt

materials with all lead and lift (for any dia, of pipe)

Dismantling santtary fittings like wash basin . W.C. pan

89 25 Indian and Europe an type, flushing tank etc. including 401.63 Each

stacking the materials with all lead and lift

Scraping oil paint from steel and other metal surface and

90 30 making the surface even (with Hand Scraping.) 48.83 Smt

Removing and scraping of old deteriorated plaster

of any thickness from wall / R.C.C member

91 5.00 including stacking of serviceable material and disposal of 19.38 Smt

unserviceable from site of work with all lead and lift

Providing and fixing M.S. fan clamps of shape and

92 5 size as specified in existing R.C.C. slab including cutting 168.53 Each

chase and making good.

Cutting out cracks of roof terrace to V-section, cleaning out,

93 5 wetting, grouting with cement and sand slurry 1:3 (1- 64.58 Rmt

cement 3-sand )

Cutting out cracks roof terrace to V-Section cleaning out

94 5 and filling solidly with a hot mixture of bitumen and 75.29 Rmt

clean dry sand (1:1 by weight)

Providing & Fixing in position Alluminium doors with

frame using approved quality anodised extruded

alluminium section as approved by Engg.in charge(Jindal

alluminium)(a) Frame sections 101.6x44.45 mm (b)

Shutter bottom vertical & top section 83.5x44.45

(wt.1.31 kg/mt.)(at 1.31 kg/mt) (c) Shutter bottom section at

114.3x44.45 mm at (1.37 kg/mt) Shutter middle section at Sq.

95 3 100x44.3 wt.(1.37 kg/mt) incl.providing & installing 5 mm 2900.00

thick approved color Acrylic sheet of standard quality

fixed with glazing chips on upper pannel & Laminated

sheet on lower pannel (wtt.0.13 kg/Rmt) etc.comp.as

direction of engg.in charge.(N.S.)

Providing & Fixing in position Fully Panelled / Partly Panelled

Partly Glazed / Fully Glazed Alluminium doors with frame

using approved quality anodised extruded

alluminium section as approved by Engg. In charge.(Jindal

alluminium )(a) Frame sections 101.6x44.45 mm b) Shutter

vertical & top section 83.5x44.45 (wt. 1.31 kg/mt.)( at

1.31 kg/mt) © Shutter bottom section at 114.3 x44.45mm at (

96 3 1.37 kg/mt ) Shutter middle section at 100x44.3 wt. (1.37 4583.00

kg/mt ) incl. providing & installing 5 mm thick Glass of Sq.M.

standaed quality fixed / 12 mm thick Laminated sheet

with glazing chips (wt. 0.13 kg/ Rmt) in panels etc. comp.

as per Detail Given & direction of engg.in charge.

Providing & Fixing in position Alluminium window

2/3/4 track sliding / fix type with frame using approved

anodised extruded alluminium section as approved by Engg.

In charge.(Jindal alluminium) units equivalent. Sq.

including P/F installing 5 mm thick clear/tinted Glass of M.

standard quality etc.comp.

Providing & Fixing in position Alluminium vents with frame

using approved anodised extruded alluminium section as

approved by Engg. In charge.(Jindal alluminium)

units equivalent Frame section of 63.50 x 38.50 mm. Sq.

(wt.0.68 Kg/Rmt) incl. Providing & Installing 5 mm M.

thick Glass of standard quality etc. comp.

Providing and fixing of Ridge flashing for roof panel

shall be made out of 0.5 mm thick pre coated GI

sheet. The Pre coatedsheet shall be of minimum

mpa steel grade confirming to IS 14246:1995 and shall

have zinc coating of minimum 120 gsm as per

IS:277:1992, 5-7 microns epoxy primer on both side of

the sheet and polyester top coat 15-18 micron. The PP GI

99 2 Sheet shall have plastic protective guard film of minimum 510.10 Sqm

25 microns to avoid scratches during transportation. The

ridge shall be fixed to the steel members by poprivetor

self drilling/self stitching fastners @ maximum 450mm c/c

along length of capping/flashing etc complete .

Supplying and fixing vinyl flooring over the surface having

100 4 1-2 mm thickness as per directed by engineer 963.00 Smt

incharge etc as completed (N.S.)

Providing and laying 15mm bamboza wooden flooring

as per architect's drawing with all necessary details

as directed by the project consultants. Use underlay

101 5 for better result as per Detail specifications and directed by 2690.00 Smt

the project consultants. (N.S.) Approved Rate )

Providing and fixing 1.20 Metre high fencing with

Metre long M.S. Angle posts 40 mm x 40 mm x 6 mm and

oil painting 3 coats fixed at 2.5 Mt, C/c. with five

Horizontan lines and two diagonals of galvanised steel

102 3 barbed wire weighting 9.38 Kg. per 100 Metre, strained and 385.40 Rmt

fixed to posts with G.I, staples including fixing the posts

in ground with 0.5 M x 0.5.M x 0.5 M. block in C.C 1:5:10

Renovation and Repairing work in Chainlink fencing any

size and also refixing work incl. febrication work with all

103 3 materails to be painted one coat of primer and twocoats 735.00 Rmt.

of paint as directed inline and level. (N.S.)

Constructing a sink (chowkedi) with C.C. 1:2:4, 12 cm.

thick over B.B. masonry in C.M, (1:6) in front and dwarf wall

104 3 1.0 Mt. high and 23 cm. thick cement plaster to 2235.66 Rmt

masonry / in C.M.1:3) and cement concrete flooring in 1:2:4:

mix 5cm.dia.drain pipe etc.complete.

Constructing a cooking platform 60 cm. width and 70 cm

high resting on B.B. Masonry walls 23 cm. thick in C.M.

(1:6) with (i) Fixing or precast R.C.C. 1:2:4) 8 cm. thick

105 5 slab with marble chips set in C.M. (1:6) (6 mm thick 933.98 Rmt

terrazo) with plastering on exposed faces walls in C.M.

(1:4) etc complete.

Extra rate for using Ready Mix Concrete of any grade

for below ground level to vertical upto any floor with

106 3 delivery & suction Pipe & Pump etc. The rate includes fule, 760.00 Cmt

pump operator, skilled labor, driver etc completed and as per

direction of engineer in charge

P/A Tremix with dewartering machine and floater

machine on constructed CC work for finishing the surface

as per requirement. The rate including all machinaries, labor,

107 3 loading, unloading, transportaion etc complete as per 54.00

direction given by engineer incharge.

Carrying out timber treatment to all wood work including drilling

holes and spraying oil based chemical solution on surface of

timber work for termite control including labor and material etc.

complete. Using Chlorpyriphos20 EC as per 6313 2013 Part III

(1% concentration by mass) is recommended one litre

108 5 chemical emulsion diluted with 19 liters of kerosene. Total 54.98 Smt

diluted concentration will be 20 liters inclusive of 1 liter

chemical emulsion application in drilled holes and 0.75 / Litre

chemical per one Sqmt two coat on wood surface not protected

by paint or varnish.

Applying general insecticide pest control treatment to floors,

cupboards etc including labour materials etc. complete. Using

Imidacloprid 30.5 SCas Per IS 6313 part -II( (0.075%

concentration by mass) is recommended 10.5ml chemical

109 5 diluted with 5 liters of water application 0.5 litre chemical /Sqm 88.40 Smt

of surface is recommended as per I.S.

Carring out plinth treatment to post construction / existing

structure by spraying chemical solution for termite control

treatment including labour and material consist ment with

I.S. specification. Using Chlordene and Chior purfiles

20 EC. As Per 6131_paret-II Consentration Weight on

110 5 percentis recommended i.e one litre 20 EC chemical 104.90 Smt

emulsion with 19 liter give 1% concrentration inclusive of

one litre chemical emulsion appication attherate of

Litre chemical / Sqm of surface is recommended as per

Carrying out wall treatment for termite control including

spraying with chemical solution in oil base including labour and

material Using Chlorpyriphos 20 ECAs per IS 6313 part - II (1%

concentration by mass) is recommended i.e one litre chemical

111 4 emulsion diluted with 19 liter oil base. Total solution will be 20 37.34 Smt

liters inclusive of one liter chemical emulsion application at the

rate of 7.5 litre chemical / Sqm of surface is recommended as

Providing erecting and fixing double coated Syntex or

equivalent PVC.(ISI) water tank of required capacity

112 5 each with all necessary fittings and connection etc. 3.91 Litre

complete on terrace.

Providing and fixing to wall, ceiling and floor galvanised

Mild steel tubes (Medium grade) of the following

113 nominal bore, tube fitting and clamps including making good

the wall ceiling and floor.

Providing and laying in trenches galvanised mild steel

tubes (Midium grade) of the following nominal bore,

114 and tube fitting (Earth work in trenches to be

measured and paid for separately)

Making connection of galvanised Mild steel distribution

branch with galvanised mild steel main 50 mm to 80 mm

115 5 nominal bore by providing and fixing tee including cutting 600.08 Each

and threading the pipes complete.

Providing and fixing to wall ceiling and floor 6.0 Kg.F/Cm2

working pressure poluthene pipes of the following out

116 side Dia. Low densidy, complete with special falnge

compression type fittings,wall clips etc.including

making good the wall ceiling and floor.

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2

working pressure polythene pipes of the following out

side Dia. Low densidy, complete with special falnge

117 compression type fittings, wall clips etc. including

making good the wall ceiling and floor.

Providing and fixing cast iron (Spun) Nahni trap of the

following nominal diameter of self cleaning design with C.I.

118 5 screaed down or higned grating including cost of cutting 600.08 Each

and making good the walls and floor 100 mm inlet and 50 mm

outlet.(C)100mm dia.

Providing and fixing water closet squatting Pan (Indian

type W.C.Pan) size 580 mm (Earth work, bed concrete,

119 5 foot rest and trap to be measured and paid for separately) 926.10 Each

(A) Vitreous China. (I)Long pattern = White colour

Provdg. & fixing wall mounted White / Color Vitreous

China European water closet with integral P trap of

120 5 "Cera" - Clair Series or equivalent incl. seat cover , Chair 4250.00 No.

Bracket etc. complete as per direction of engg. In charge.(N.S.)

Providing and fixing wsh down water closet (Europe

an type, W.C.Pan) with integral P or S trap including jointing

the trap with soil pipe in Cement Mortar1:1 (1-

121 5 Cement:1-fine sand) (Seal and cover to be measured and 1290.80 Each

paid forseparately) (A) vitreous China Pattern :(i) in white

Provdg. & Fixing Flat Back Large Urinal of White/ colour of

"Cera" or " Hindware" incl. C.P. Brass waste coupline

122 6 waste pipe, pvcconnection etc. Complete.( size 635 1850.00 No.

Providing & Fixing Angle cock of " Ess Ess" - Trend

123 10 series or equivalent standard make as approved by 675.00 No.

engg. in charge all complete. (N.S.)

Providing and fixing 100 mm size P or S trap for water

closet squatting pan including jointing the trap with the pan

124 10 and soil pipe in cement Mortar1:1 (1-Cement : 1-Fine 311.85 Each

sand)(A) Vitreous China.

Providing and fixing wash basin with single hole for pillar

tap with C.I.or M.S. brackets painted white including sutting

125 8 holes and making good the same but excluding fittings. 1400.18 Each

(A) Vitreous China: (ii) Flat Back wash basin 550 mm x v

mm size.(i) In white colour.

Providing and fixing Kitchen sink with C.I. or M.S. brackets,

painted white including cutting holes in walls and making

126 8 good the same but excluding fittings. © Vitreous China 2257.69 Each

Sink. (i) 600 mm x 450 mmx 150 mm size

Providing and fixing 600 mm x 450 mm bevelled edge

mirrror of superior glass mounted on 6 mm thick A.C.

127 15 sheet or ply wood sheet and fixing to wooden pluge with 825.48 Each

C.P. brass screws and washers.

Providing and fixing chromium plated brass halftrun flush cock

128 of approved quality including fixing in pipe line etc. complete.

Provdg. & fixing White / Color Vitreous china Counter

wash basin with signle hole for pillar tap of "Cera " -

Concord series of 550 x425 mm size to be fiited in stone

counter with necessary brackets painted white incl.

cutting holes and making good the same .Cost Includes

129 10 P/F C.P. brass waste coupline, 32 mm dia fisher union

mm dia. Pillar cock & Angle cock of " Ess Ess"- Trend series

,32 mm dia. Waste pipe etc. complete as per dir. of

engg. in charge.

Providing and fixing wash basin with single holefor pillar tap

with C.I. or M.S. brackets painted white including sutting holes

130 10 and making goodthe same but excluding fittings.(A) Vitreous 1400.18 No

China:(ii) Flat Back washbasin 550 mm x v400mm size. (i) In

Providing & Fixing S.S.304 Grade Sink of Nirali /

131 5 Krishna or Equivalent Make for Kitchen Platform of 4650.00 No.

size : 24":x18" as per Direction of engg. In charge

Providing and fixing C.P. brass towel rail comlete with

132 10 C.P.brass brackets fixed to wooden plugs with C.P. 597.22 Each

brass scews.(B) 600mm x 20mm size.

Providing and fixing 600 mmx120 mm glass shelf with

133 5 C.P. brass bracket and guard rail complete mixed to 561.03 Each

wooden plug with C.P.brass screws.

134 5 Providing and fixing toilet paper holder. (A) C.P.Brass 414.53 Each

Providing and fixing screw down bib taps of following size.

135 (A) Brass screw down bib tap polished bright.

10 (i) 15mm dia. 184.98 Each

10 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size.

136 (B) Brass chromium plated screws down Bib Tap.

15 (i) 15mm dia. 184.98 Each

10 (ii) 20mm dia. 212.68 Each

Providing and fixing screw down bib taps of following size.

137 © Gun metal screw down bib tap.

25 (i) 15mm dia. 157.29 Each

15 (ii) 20mm dia. 176.09 Each

Providing and fixing pillar tap, capstan head, screw

138 down high pressure with screws, shanks and back nuts.

20 (i) 15mm dia. 305.67 Each

15 (ii) 20mm dia. 351.18 Each

Providing and fixing Gun metal check or non-return

139 fullway wheel valve.

10 (i) 15mm dia. 184.98 Each

5 (ii) 20mm dia. 201.80 Each

15 (III) 25 MM DIA 416.47 Each

12 (E) 40mm dia 656.86 Each

Providing and fixing chromium plated brass half trun flush

140 cock of approved quality including fixing in pipe line etc.

15 (i) 20mm dia. 252.26 Each

10 (ii) 25mm dia. 261.16 Each

5 (iii) 32mm dia. 273.03 Each

Providing and fixing Urinal or approved quality

including conecting the Urinal with waste pipe , tap

141 10 etc.complete. (A) White earthen ware flat back or corner 1026.01 Each

type size 430mm x 260mm x 350mm.

Providing and fixing Urinal of approved quality

including connection with trap and with integral

142 15 longitudinal flush pipe. (A) Squating plate pattern white 1535.63 Each

earthen ware 550mm x 300mm.

Providing and fixing chromium plated, bottle trap with

143 15 necessary couplings of approved quality for wash basin. 292.87 Each

Providing and fixing ball cock ofapproved quality as

144 20 directed. (A) Copper Metal (i) 25mm dia. 131.57 Each

Providing and fixing ball cock of approved quality as

145 25 directed. (B)Abonite (i) 25mm dia. 101.89 Each

Filling with good Quality thor as and where directed

by the Architect / Engineer-in-charge, in sunk in layers of

146 10 15 cm. thickness, including watering, ramming well etc. 3850.00 Cmt

complete, as directed by the Architect / Engineer-in-charge .

Providing laying and jointing in true line and level 15 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and

fixing the same with solvent, including cost of all

materials.adhesive

Providing laying and jointing in true line and level 25 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX orequivalent

as approved by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every two metre

C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of

Providing laying and jointing in true line and level 32 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every two metre

149 15 C/C or shall be concelled as directed including 117.97 Rmt

necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of

Providing laying and jointing in true line and level 40 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every two metre

150 10 C/C or shall be concelled as directed including 146.65 Rmt

necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of

Providing laying and jointing in true line and level 50 mm dia.

U.P.V.C. Pipe (SCH-40) for cold water including fittings

make PRINCE/ SUPREME/ ASTRAL/ FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed

on the wall with the help of clamp at every two metre

a 10 C/C or shall be concelled as directed including 193.73 Rmt

necessary fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including cost of

Providing in line level plumb, fabricating and fixing

three row horizontal barbed wire fencing and punched tape

concertina coil of 9 turns per meter of 610 mm dia fixed

with clips on top of the angle iron posts. The punched tape

concertina coil having sharp barbs at every 25 mm spacing

shall be 0.5 mm thick and 19 mm width and weighting

kg/100 mt. (Average) as per manufacture's specification. The

151 8 rate shall also include providing and fixing 1.20 390.00 Rmt

mt.total long MS angle 40 x 40 x 6 mm @3.00 mt.c/c spacing

embaded in RCC column, angle posts shall be painted with

one coats of red oxide and two coats of enamel paint of

approved quality at top compound wall.

Fixing sun film for protection sunlight in black or any colour as

152 10 as directd by engineer In Charge.(Market rate) 850.00 Smt

Providing & Fixing 3 mm thick F.R.P.sheet of Approved

Quality & Color / Pattern as per Consultant's design also

includes required fabrication structure in the grid of 2'-

0x2'-0 size using hollow pipe of16 gauge & size 2"x1" &

1"x1" ,G.I. & Bitumen Washers, Silicon paste application

153 6 for fixing the sheet . Rate also includesnecessary bending, 1930.00 SqM

cutting, labor charges , Zinc Primer coat & Two coats of oil

painting of color as approved by consultants & making

good the wall. (N.S.)

Providing 2 mm thick F.R.P. Gutter with necessary M.S.

154 10 Supporting Brackets. (N.S.) 400.00 Rmt

Hiring charges for J.C.B.machine inclduing cost of fuel,

155 10 operator, dirver etc.. ( 12 hours sift day/night) 600.00 Hrs.

To provide tractor with hydraulic trolley, driver, 4 Nos. of

Labor with all tools like bucket drum, showels, trikam,

pavadas, etc,, to carryout different works during

156 10 monsoon for 12 Hrs. Shift. Work shall be carried out as 1661.02 No.

per the instrucitons of Engineer In-Charge.No extra charged

shall be paid for night shift.

Roller Blind Providing and fixing Roller Blind curtain

fixed on window level on wooden batten and curtain

lift with cotton thin rope, make of aerolax or

157 10 equivalent design and colour as per instruction by engineer 3285.00 Smt

– in – Charge with necessary hardware fitting, material

and labour etc complete.

Providing & Fixing Door closer - Door closers (Heavy type of

158 5 765 number) Hardwire or Everite Prabhat or Equivalent 474.58 No.

Providing and fixiing M.S. Fan clamps type 1 of 16 mm dia

M.S. bar bent to shape with hooked ends of R.C.C. slabs

159 5 during laying incl. painting the exposed protion of loops, all as 124.74 No.

per standard design complete.

Providing cement vata (10cm. x 10 cm. size) quarter round in

160 15 cement mortar 1:1 including neat cement finishing, watering 23.45 Rmt

161 10 Making Water connection from exi.Muni. Water line (N.S.) 250.00 No.

Providing and applying fibere reinforced cementitious

micro concrete work in cellings and beams

incl.mixture of CEMSCREED HM (F) fair mate

company material, FBR bonding agent material with

water in suItable proportion anti corrosive treatment on

162 50 exposed beam,celling steel bars with safeCore R incl.all

kind of labour etc.comp.including three coat of white

wash.(Approved Rate)

Providing and Fixing 1 H.P. Electrical monoblock or

submarcible water pumps withmotor and required cable and

163 5 switch board of approved brand and make etc.comp.as 6800.00 Set

.Providing TMT Bar FE 415 reinforcement for R.C.C. work

163 including bending, binding and placing in position complete up

a to floor two level

ProvidingTMTBarFE500/500Dreinforcement for

R.C.C.workincluding bending,binding and placing in position

b 100 complete upto floor two level placing in position complete upto 75.46 Kg.

floor two level placing in position complete upto floor two level

Providing and fixing 30mm thick solid both side prelam PVC

164 15 door shutter (sintex door-equivalent) with necessary alluminium 2867.00 Smt

fitting with EL-7 section frame

Conveyance charge of Earth,Lime, Murrum, building rubbish

earch manure or sludge and excavated rock and fly

165 50 ash,aggregate of any kind etc.comp.upto 5 km lead.(L.S.) 235.51

Providing and laying polished granite stone slab 18 mm thick in

risers of steps, dedo and pllars laid on 10 mm thick cement

166 10 mortar 1:3 (1 cement:3 coarse sand) and jointed with gray 2690.00 Smt

cement slurry including rubbing & polishing etc.complete.

Wall panelling with 12 mm MDF fixed to existing alluminium

framing and making grove as per design and finished with

167 10 royal plastic paint as per instruction of engineer incharge. 1688.00 Smt

Providing and laying 15mm bamboza wooden flooring

as per architect's drawing with all necessary details

as directed by the project consultants. Use underlay

168 15 for better result as per Detail specifications and directed by 2690.00 Smt

the project consultants. (N.S.) (Approved Rate )

Applying two coats of Birla (whitecementbased) or

Asian (acryliclapy-putty) or equivalent & two coats of primer

of approved brand and manufacture on new wall surface

169 10 to give an even shade including thoroughly brushing the 40.19

surface free from mortar dropping

Finishing wall with weather proof exterior emulsion paint on

170 50 wall surface (two coats) to give an required shape evenshade 113.40

after thoroughly brushing the surface to remove all dirt, and

remains of loose powdered materials.etc complete

Providing and fixing flush door shutters, solid core

construction with frame of first class hardwood with cross

board and face veneer or plywood face panels, with both

side 1 mm laminate finishing including anodized

aluminum butt hinges with necessary screws. Decorative

type and pine wood core anodized minimum 3 no

mm long aluminum butt hinges in flush door shutters with

2 no of brass holdfast 325 mm long 1 no brass tower bolt

250 mm long and two no of 150 mm long brass door handle

. Decorative both side laminated Flush door 35 mm thick.

with frame of 10 cm x 7 cmt Indian teak wood frame

including all necessary fitting fixtures hardware screw

and adhesive etc fixing up to all lead and lift height up to

45 mtr from GL etc complete as per direction of engineer

P/M/F chainlink jali 8'x4' size as per details sketch &

instructionof engineer in charge same as lal darwaja garden

pattern consisting of 3'dia. M.S black pipe 'A' class 5'4" ht. fixed

at 8'9" c/c in C.C 1:2:4 block of 9"x9"x9" size chain link jali of

size 2"x2"x10 gauge fixed in 35x35x5 mm MS angle frame 8'x4'

172 5 size with MS flat of size 25x3 mm welded jali etc.comp.The jali 1230.00 Rmt

is to be welded to MS pipe with MS flat as instruction given.The

M.S pipe and the M.S angle frame are to be painted one coat

of primer and two coats of paint as directed in line and level.

Providing & Fixing masonary wall with porbandar lachiya stone

with well dressed grooveas per directed by engg.in charge for

foundation, plinth or super structure level (above plinth level

upto floor two level) in cement mortar 1:5 (1-cement : 5-fine

173 5 sand) incl.pointing the joint with white cement and yellow oxide

powder in proportion to match stone colour the joints should be

thread grooved as per exi. lake stone pitching apperance

(A) stone masonary wall/stone dressed single faced (size

5 (B) stone coping (size 15"x8"x4") 510.00 Rmt

5 (C) stone coping (size 15"x8"x9") 790.00 Rmt

5 (D) stone column (size 15"x15") 10710.00 Cmt

5 (E) stone column top (size 20"x20"x9") 685.00 No.

Supplying and fixing of 300 mm-L x 15 mm-B x 380 mm-H

Kerb block for Footpath in M-20 grade using 20 mm

nominal size black trap aggregate of Sevaliya/Timbaor

equivalent quality for pre-cast blocks,

reasonablyexposed finish/ formwork , mould

with well equippedwith vibratory system for kerb stones

of approved design including curing, etc. complete,

including thecost of formwork etc. complete. The rate

shall also include necessary cutting of asphalt, fixing

the Kerbstones in line and level on 5 cm thick sand

174 10 bedding withnecessary equipments and 393.00 Rmt

materials. The rate shall also include the flush pointing in

CM (1:3) for all joints of the kerb stones. Filling of zari alone the

sides of the kerbstone fixed with Bituminous

concrete Bituminousconcrete / C.C. mixed in proper position

to flush withthe road surface as directed by Engineer

in change to form a portable mixture.a) Laying on 5 cm

thick Sand Bedding

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size shape

(Usually Uni-Paver Blocks) using black trap good quality

aggragate of 20 mm nominal size for footpath,parking areas,

service lanes and other areas as mentioned in the drawing /

instruction of engineer in charge. Cost includes formworks

using rubber mould, Rate providing and laying paver blocks as

per required grading and specification. The paver block shall

be mechanically compacted. The work of paving blocks shall

175 25 be executed in line and level by skill mason of flooring work 429.00 Smt

only. It should be laid in such a way that the no cutting of the

paver block to be necessary. if cutting of paver block necessary

then it should be cut by machine only and carting. The finished

surface of the paver block shall have resonably good, plain

finished. Paver blocks shall be compacted and shall be relaid if

necessary. Gravel or such type of materials shall not be

allowed for production. Laying on 5 cms thick sand

Provoding and fixing flush door shutters, solid core construction

with frame of first class hard wood with cross board and face

veneer or ply wood face panels, including anodised alluminium

butt hinges with necessary screws. (B) Non- decorative type

and block board core anodised alluminium butt hinges in flush

door shutters (2) 35 mm thick. Labour work for fixing any kind

of paving with cement pointing in CM 1:2, including watering,

ramming etc comp. as dir.For pavement

I) Laying on Sand bedding as per requirement to fix the

177 50 C.C.Block / Nibhada Stone in Line & Level 78.00 Smt

Box type metal letters forming composite box made from 1mm

thick stainless steel plate of grade 304 having brush finish of

178 following font size to be fixed at Main Gate in english and or

Gujrati and including fixing charges approved before fixing by

clent / consultant.

A 5 400mm high 1000.00 Nos.

B 5 300 mm high 750.00 Nos.

C 5 230 mm high 565.00 Nos.

Providing and fixing false ceiling at all height including

providing and fixing of frame work made of special sections,

power pressed from M.S. sheets and galvanized with zinc

coating of 120 gms/sqm (both side inclusive) as per IS :

and consisting of angle cleats of size 25 mm wide x 1.6 mm

thick with flanges of 27 mm and 37mm, at 1200 mm centre to

centre, one flange fixed to the ceiling with dash fastener

mm dia x 50mm long with 6mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of required length

with nuts & bolts of required size and other end of angle hanger

fixed with intermediate G.I. channels 45x15x0.9 mm running at

the spacing of 1200 mm centre to centre, to which the ceiling

section 0.5 mm thick bottom wedge of 80 mm with tapered

flanges of 26 mm each having lips of 10.5 mm, at 450 mm

centre to centre, shall be fixed in a direction perpendicular to

G.I. intermediate channel with connecting clips made out of

179 50 2.64 mm dia x 230 mm long G.I. wire at every junction, 850.00 Smt

including fixing perimeter channels 0.5 mm thick 27 mm high

having flanges of 20 mm and 30 mm long, the perimeter of

ceiling fixed to wall/partition with the help of rawl plugs at

mm centre, with 25mm long dry wall screws @ 230 mm

interval, including fixing of gypsum board to ceiling section and

perimeter channel with the help of dry wall screws of size 3.5 x

25 mm at 230 mm c/c, including jointing and finishing to a flush

finish of tapered and square edges of the board with recomme-

nded jointing compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on both sides of

joint and two coats of primer suitable for board, all as per

manufacturer’s specification and also including the cost of

making openings for light fittings, grills, diffusers, cutouts made

with frame of perimeter channels suitably fixed, all complete as

per drawings, specification and direction of the Engineer in

Charge but excluding the cost of painting.

Providing & Fixing SPEED BUMP - #2 No (1 black, 1 yellow)

350 x 500 x 50 mm, Size per color End Cape 350 MM x

MM x 50 MM TOP DESIGN - Lining Top flat ANTI SKID

PATTERN FOR GRIP COLOUR :- YELLOW & BLACK BODY

MATERIAL :- MODIFIED THERMOPLASTICS (Polymer

180 1 Rubberized ) • ECO FRIENDLY RECYCLE RUBBER 2185.00 Rmt.

Packing :- 4 pcs/ woven Bag Load Capacity :- 20 MT Fitting (

Fixing on TRAKE) :-4 holes & END CAPE :- 2 HOLE HEX Bolts

with Washer Epoxy for Bolt Fitting etc. complete as directed by

Providing and fixing of Roller blind curtain/blackout. The fabric

shall be woven from formulated platisol extruded over a

polyaster yarn.The fabric shouldl be weaved to provide subtle

181 5 view of the side of the blind and should offer elimination of 2610.00 Smt

glare and sunlight radiance upto a minimum of 80%.The fabric

shall be flame retardant.

Providing and fixing PVC/Gpsysum plain colour false ceiling

with grid type with aluminium frame from gypsteel,

fastners ,props, Finishing as per architectural drawing

allowing openings for A.C. Diffusers, Light/Electrical

Points etc –complete, Prior to fixing on frame.(Brand :

Anutone or equivalent ) (N.S.) or as directd by engineer In

Provdg. & laying S.W. Gully trap with brick masonry chamber &

183 5 water tight G.T.Stone including fixing of covervSquare mouth 1263.15 No.

trap 100 mm x100 mm size P-Trap

Providing cement vata (10cmx10cmsize) quarter roundin

184 5 cement mortar 1:1 including neat cement finishing, waterin 23.45 Rmt.

getc. complete.

Providing and laying (to level or slopes) and jointing with stiff

mixture of Cement Mortar in proportion 1:1 Salt glazed

185 3 stoneware pipes including testing of pipes and joints 211.05 Rmt.

complete.(A) 100mm dia.

Providing and laying (to level or slopes) and jointing with stiff

mixture of Cement Mortar in proportion 1:1 Salt glazed

186 5 stoneware pipes including testing of pipes and joints 288.23 Rmt.

complete.(B) 150mm dia.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

187 2 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc. complete.(i)

Inside dimensions 455mmx 610mm and 450mm deep for

single pipe line.

Constructing brick masonry chamber for underground C.I.

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of

cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

188 3 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with cement mortar 1:3 finished smooth with a floating

coat of neat cement on walls and bed concrete etc.

complete.(i)Inside dimensions 500mm x 700 mm and 450mm

deep for pipe line with one or two inlets.

Providing, supplying and fixing precast C.C. blocks (M-20)

edge kerb having size of 75 x 300 x 300 mm depth and as per

189 5 design conveying it to the site, jointing into C:M 1:3 and racking 219.00 Rmt.

out the joints incl. necessary excavation of asphalt, soil

etc..completed.

Constructing a cooking Sandwich platform 60 cm. width and

cm high resting on B.B.Masonry walls 23 cm.thick in C.M.(1:6)

190 5 with (ii) Fixing black Granitee 30mm thick laid on precast 754.95 Rmt.

R.C.C. (1:2:4) slab with plastering on exposed faces of wall in

C.M. (1:4) etc complete

Providing and fixing hard drawn steel wire fabric 75mm x

25mm mesh or weight not less than 7.75 kg. per Sq.M. to

191 5 window frames etc. including60 x 20mm beading of teak wood. 754.65 Smt

Providing & fixing 15 cm wide chicken mesh jali with nails &

192 15 then application of 15 mm plaster on R.C.C.& masonary joints 35.00 Rmt.

as per dir.of engg.in charge

Providing and laying cement concrete flooring 1:2:4 (1-

cement : 2-coarse sand : 4-graded stone aggregate 20mm

193 5 nominal size) laid in one layer and finished with a floating 348.08 Smt.

coat of neat cement. (A) 50mm thick.

Providing and constructing, Underground (U/G) water tank

of specified capacity, on specified location, for all depths, in

controlled CC of M-200 grade with bottom slab, top slab

and RCC walls, including cost of form work and

reinforcement,with inside and outside plaster in CM 1 :3

and water proofing treatment as per IWP

specification,including injection, grouting, etc. complete.

The rate includes for providing and fixing two nos. 0.6m. x

0.6 m. size medium duty CI manhole cover/s at top,

including wash out pipe line and inlet and outlet

connections etc. complete.

Providing and fixing PVC Printed pain colour false ceiling

with grid type with alluminium frame consisting of 600mm x

600mm 3mm thick plain PVC sheet used as panel insert in a

frame work made using anodized alluminium T section of

size 1 x 1 (235 x 25mm, 19 gauge or 1 mm thick) in square

pattern of grid sizes of 2 x 2 (600 x 600mm) The alluminium

195 5 frame work is supported from the cceiling with the help of 300.12 Smt

G.I. hook and G.I. wire/6mm M.S. rods of required sizes to

maintain proper level etc. The aluminium frame work is

supported on side wall with the use of alluminium L section

of size 1 x1 (25 x 25mm) angles etc. complete as per

direction of Engineer in charge. Manufactures specification

Providing and supplying of labour for necessary manual

excavation, cleaning, Shifting of Material Or any other, or

196 10 for any other work as directed by Engineer In charge. The 551.00 No

Rate includes Handcart with Mazdoor

A 5 Mukadam/supervisior/karigar 425.00 No

B 10 Fitter/Plumber/Mason 697.00 No

C 5 WELDER/ Gas cutter at Day /night 689.00 No

Supplting of welding machine / gas cutter including cost of

D 10 welding rods/gas, Transportation, including carting from site 1500.00 No

E 15 Mazdoor at Day Female 450.00 No's

E 15 Mazdoor at Day Male 493.00 No's

Supplying electric breaker machine for RCC slab or asphalt

demolishing work on site by using operator, fuel, power

supply etc.complete as directed. (no payment should be

allowed for non working condition of machinery and for

pipe line excavation and M.H. work. Allowed only for break

down work) (Based on Previously approved rate by CE sir )

Providing and fixing concealed center point to wall ceiling &

floor CPVC (SDR 13.5) PIPE having National Sanitation

198 Foundation (NSF) seal for potable water of following dia.

Nominal bore tube fittings and clamps including making

good the wall, ceiling and floor etc. complete.

A 15 15 MM DIA 165.21 Rmt

B 5 20 MM DIA 202.97 Rmt

C 10 25 MM DIA 247.25 Rmt

D 15 32 MM DIA 330.36 Rmt

E 10.00 40 MM DIA 437.66 Rmt

199 5 50 MM DIA 647.30 Rmt

Supplying and fixing C.I. cover 300mm x 300mm without

200 5 frame for Gulley trap (Standard pattern) te weight of cover 491.80 Each

to be not less 4.53 Kg.)

Providing and fixing to wall ceiling and floor 10.0Kg.F/Cm2

working pressure polythene pipes of the following out

201 side Dia. Low densidy, complete with special falnge

compression type fittings, wall clips etc. including

making good the wall ceiling and floor.

Providing, Fabricating & Fixing signage's using 304 grade Stainless

steel 1.5 mm thick brushed steel finish plate (2 nos) with 8mm

thk. Acrylic sheet covered with vinyl of approved colour,

sandwiched between two S.S plate and fixed with s.s struds .

Sandwiched plates should be fixed in 12mm X 12mm S.S 1.5mm

thk.304 grade frame and punched (laser cut) lettering carried out

on both the s.s plates of required size and text as directed by

Engineer and hanged to ceiling with the help of S.S 8mm thick

chain at both ends with making all the fixing arrangement to the

ceiling and to the plate etc. complete all As per drawings and

design supplied by architect and instruction given by authority and

Providing and applying approved coloured chips 20mm thick

STONE CREAT PLASTER for exterior / interior side on wall up to

full height from ground level consisting of 12mm thick backing

coat of CM 1:3 (1 cement : 3 Bodeli sand) and 8mm thick finishing

coat of CM 1:1 (1 cement (Grey / White / Colour : 1 stone grit

(approved coloured chips)) including providing & fixing 300mm

wide strip of chicken net at vertical and horizontal joints of RCC

and masonary including 10mm alluminium channel for expantion

joint / grooves, curing, necessary scaffolding in true line and level

etc. complete as directed by EIC.

Providing and laying plain dressed surface machine cut

dhrangadhra stone slab of approved quality for dedo, & risers of

steps, etc. over 12mm (Average) thick base of cement mortar 1:4

(1-cement : 4-coarse sand) or L.M. 1.1.5 laid over and jointed with

204 10 cement slurry including surface dressing, rubbing, providing 2289.67 Sqmt

grooves, rounding the edges and polishing for proper finishing etc.

complete size & pattern as per drawing/instructions of

EIC/Consultant.

Proviging and Fixing Storage Shutter made out of 50mm X 25 mm

Indian Teakwood Frame and 18 mm Ply Board. With 1 mm thick

laminate finish in the front and 0.8 mm thick Laminate on Back

Side with 12 mm thick Indian teakwood beading. The scope also

include providing and fixing s.s. finish hardware as per the

Requirement. The rate include cost of all labour, material and with

all hardware like handle, magnate, tackels, adhesive, screws,

etc.for satisfactory completion of this items.All Exposed Wood

Work shall have malamine polish etc. complete.

Providing & Fixing Sun Control Reflective Type Film / Frosted Film

206 90.00 as Selected by Architect/ Engg. In Charge For Glass Doors / 646.37 Sq.mt.

Windows etc. as Directed.

Providing & Fixing in Position Vertical Roller Blinds with Minimum

3 % and Maximum 5 % Light Transperace Screen Fabric Incuding

Providing & Fixing of Powder coated G- Channel at the Topof

Window with necessary Screw , Cleats etc. and PVC Roller (

Weight Pipe) and PVC Chain For Up and Down Movement of

Blinds etc. of Approved Make and as per Drawings / Instruction of

207 25.00 Engg. in Charge For All Colors and Shades. Rates Includes all 1372.03 Sq.mt.

Lead and Lift For All Floor Level, All Height , All Material

Accessories, Fixing , Scaffolding , Labor etc. Complete in All

Respects. All Required Accessories & Material must be From

Same Manufacturer.

Providing corrugated G.I. sheet of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8mm diameter with

208 10.00 bitumen and G.I. limpet washer or G.I. limpet washer. filled with 719.93 Sqm

white lead complete excluding the cost of purlins, Rafters and

Trusses.(1) 0.80 mm thick sheet.

Providing valleys 900mm overall in plain 1.6mm thick G.I. sheet

fixed with G.I. J or L Hooks, Bolts and nuts glavanised iron J or L

209 25.04 Hooks Bolts and nuts 8mm dia G.I. Limpet and bitumen washers 1042.78 Sqm

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted

or welded in builtup for all type sections, in framed work, including

cutting, hoisting, fixing in position and applying a priming coat of

210 10.00 approved steel primer all complete as per the structural designs 126.68 Kg

and directions of Engineer in charge.Column ( 122 x 61 x 3.6mm )

Providing and applying approved coloured chips 20mm thick

STONE CREAT PLASTER for exterior / interior side on wall up to

full height from ground level consisting of 12mm thick backing coat

of CM 1:3 (1 cement : 3 Bodeli sand) and 8mm thick finishing coat

of CM 1:1 (1 cement (Grey / White / Colour : 1 stone grit

211 20.00 (approved coloured chips)) including providing & fixing 300mm

wide strip of chicken net at vertical and horizontal joints of RCC

and masonary including 10mm alluminium channel for expantion

joint / grooves, curing, necessary scaffolding in true line and level

etc. complete as directed by EIC.

Providing and laying 18 mm thick polished granite stone machine

cut in single piece (Max. available) in sill and jambs of door

,window,ventilation & lift wall cladding,staircase flooring landing,

risers & treads, skirting laid over 10 mm thick cement mortar 1 :

(1 cement : 3 coarse sand) and jointed with grey cement slurry

212 10.00 with matching pigment incl. rubbing and polishing,half rounding

edge and incl. fixing of hilty fastener at every 1/3 span of sill as

required size etc. complete colour and shed as approved by

architect engineer in charge.

Supply and Fixing of Auditorium seating Fabricate

Auditorium seating with Synchronized Push back Chair with

Ergonomically designed Poly Urethane foam for seat and

back made my DOW chemical with High Pressure moulding

technology to achieve long life performance, upholstered

with stitched 3 Layer 100% Yarn Dyed fabric Upholsteries.

Chair profile with the seat in Normal position and without a

tablet arm should not be more than 75 cm. Chair pushback

mechanism should consist of 2 nos. x DIA 50 mm ZYTEL

Based Rollers which is supported by AXIAL shaft of DIA

mm is Driven by radial movement of 4 set of Swing Arms of

size 25mm x 6 mm thickness withOrbital Riveted Solid Dia

mm Barrel MS Rivets. The pushback movement is achieved

213 1.00 by synchronised movement of 04 links mounted on Two 9990.00 No

Number of triangular Symmetrical housing of size 27 cm x

23 cm duly embossed for extra strength by 1.2 cm made up

by 0.12 cm CRCA compliance to IS 513. The entire

mechanism should be made in India and should have total

weight 8.5 kg duly Powder Coated – NO SPREAY PAINT Part

should be used for the chair of The Seat Size should be

cm x 48 cm the Back height should be 70 cm with

ergonomically designed seat and back cushions. Chair

should be available in 20”, 21”, 22” and 23” to use multiple

seat size in one layout for

matching variable arch length. Approved Make WIPRO,

Godrej, TSI, HNI, Featherlite (Including Fitting and

Transportation)

% ABOVE Or % BELOW (in words also)

CONTRACTOR'S SIGNATURE ADDCE.CITY ENGINEER

& STAMP (North West Zone)