SPL REPAIR TO 02 X OTM ACCN BLDG NOS T-19 AND T-23 AND PROVN OF DESERT COOLER ALONGWITH STAND, AUTO WATER SUPPLY AND POINT WIRING FOR OTHER THAN MD ACCN IN UNITS OF 135 INF BDE UNDER GE ROORKEE

Amount

Dismantling asbestos cement (corrugated/semi corrugated etc) sheets in roof covering complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm (AZ-150) thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm (AZ-150) thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, unframed work in any position complete all as specfied.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats and required welding quality confirming to Fe-410 (Gde E-250 quality A) complete all as specified and directed.

Dismantling of wall and ceiling board or insulation board (fibre, pulp, insulation etc) or insulation board/slabs/ blankets any thickness including cover fillet and removal from site complete all as specified and directed.

M&L for Providing and fixing false ceiling of designer tiles (high pressure steam Cured) of 4mm thickness (as per IS:14862) of size 595x595mm and any one of the design (Cascade or Electra or equivalent) in true horizontal level, suspended on inner locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grms, both side inclusive and black painted groove on all T webs) consisting of main “T” runner with suitably spaced joints to get required length and 15x32mm made from 0.3mm thick sheet, 1200mm long spaced between main “T” at 600mm C/C to form a grid of 1200x600mm and secondly cross “T” of length 600mm and size 15x32mm made of 0.30mm thick sheet to be interlocked at middle of 1200x600mm panel to form grids of 600x600mm and wall angle 15x20x0.36mm and laying false ceiling tiles in the grid including, required cutting / making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main “T”, bottom exposed width of 15mm of all “T” sections shall be pre-painted with polyester paint and black painted groove at center of size 4mm depth and 4.5 mm width, all complete at all heights as per directions of EIC.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks , straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed

Taking down old cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing downwith water, etc rubbish off premises complete all as specified.

M&L Rendering 15 mm thick in cement mortar (1:6) on fair face of brick work/ concrete surfaces (either surfaces) of wall and finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15 mm thick in cement mortar (1:4) on fair face of brick work/ concrete surfaces of wall, unplastered surface of wall finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surface of external wall all as prescribed by manufacture of paint and applying two coats of exterior anti fungal acrylic emulsion paint by using Roller over a coat of exterior water based primer, over 1mm thick wall care putty of same make all as specified and prescribed by manufacture of paint complete all as specified and directed

M&L for preparation of old decorated surface of exterior wall by complete removing existing treatment and applying two coats of exterior anti fungal acrylic emulsion paint over a coat of exterior water based primer of same make and one coat of 1mm thick wall care putty all as specified and prescribed by manufacture of paint complete all as specified and directed

M&L for preparation of old decorated surface of internal wall by removing existing treatment and applying two coats of acrylic distemper using roller over one coat of 1mm thick wall putty all as specified and prescribed by manufacturer of paint Ist Quality complete all as specified and directed.

M&L for preparation of new surface of internal wall by reputed paint manufacturers and applying two coats of acrylic distemper using roller over one coat of 1mm thick wall putty all as specified and prescribed by manufacturer of paint complete all as specified and directed.

M&L for preparation of new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for Mild steel bolts Dia of neck exc 12 mm but not exc 20 mm, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one haxagonal or square nut, exc 30 cm long complete as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) exc 1.5 Sqm but not exc 4.00 sqm each incl holdfast etc complete all as specified and directed

Taking down chowkhat or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from frames) complete all as specified and directed.

S&F pressed steel frames for doors with one or more rebates including necessary fitting lugs, hinges, lock strike plates etc completed size of frame 125x60mm with PCC (1:2:4) type B-0 back filling complete all as specified & directed.

S&F MS work as in hold foast, wind ties, plane angle cleats for securing purlins to wooden trusses or rafters etc complete all as specified and directed

M&L for Cutting holes in brick walls or stone wall exc half brick but not exc full brick built in cement or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete.

S&F 35mm thick Factory made Glazed and skeleton shutters using second class hard wood, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed

S&F 30mm thick Factory made Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F for 100mm size mild steel butt hinge medium weight ISI marked weight complete all as specified and directed.

S&F for 150mm long aluminium ISI marked, anodized, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm aluminium handles ISI marked, cast type, anodised complete all as specified and directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F for 300mm mild steel ordinary rat tail pattern springs incl roller plate complete all as specified and directed.

S&F floor door stopper of aluminium alloy body & tongue of size140mm, anodised with hard drawn spring,fixed in door, complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wood or wood based material of any description not otherwise described over 10 cm girth or width and applying two coats of synthetic enamel paint complete all as specified and directed.

S&F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete without glazing bars dovetailed or welded complete all as specified and directed.

S&F Factory Made Steel windows with side hung shutters incl box type hinges with steel handles and steel peg stay complete with glazing bars dovetailed or welded complete all as specified and directed.

S&F mild steel framed work such as grills, grating etc with ends of bars shouldered and or riveted or forged in spikes, framed guard bars, barred iron doors, ladders, framed balusters, railings and similar conforming to Fe-290Gde E-165 complete all as specified and directed.

Supply Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified & directed

S&F of 3 mm thick plain, ordinary quality sheet glass and glazing with oil putty or fixed in square not exc. 0.5 sqm in each pane complete all as specified and directed.

S&F Mild steel peg set of six complete all as specified and directed.

S&F in repair Curtain rod aluminium anodised alloy fancy type curtain rod 20 mm dia incl Brackets and knobs complete all as specified and directed.

S&F Plain mild steel wire 4mm dia, galvanised class 3, in straining bolts in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes, etc complete all as directed

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness (below or above ground level) including removal of rubbish out side complex (MoD land), complete all as specified and directed.

M&L Cement Concrete 1:3:6 (20mm graded aggregate), 75mm thick as in Plinth Protection/ Foot Path/hardstanding etc, finishing Concrete Surfaces Even and Smooth without using Extra Cement complete all as specified.

M&L for 60 mm thick Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade made with grey cement and pigment laid over 20mm thick sand cushion complete all as specified and directed. (Note :- Sand shall be paid separately)

Supply and laying sand (20 mm thickness ) for cushioning to interlocking paver block complete all as specified and directed.

M&L for PCC 1:2:4 type B-0 using 12.50 mm grade stone aggregate as in roof kerb/mud stops, coping, weathering, slightly rounded or chamfered angles and throating, bed plates, filling in frames etc as directed including necessary form work complete all as specified and directed.

Taking down carefully U/S copper/aluminium point wiring (light, fan, socket, power) complete fitting such as switches, ceiling roses, pendants, lamp holder, light fitting etc including CI/Pressed steel terminals, switch box, and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

Taking down carefully sub-main wiring/ service wire of any size including wooden baten etc and and making good the disturbed surface of wall/floor etc to match with the existing surfaces of wall/floor complete all as specified & directed.

Taking down carefully existing DB's any type and making good the disturbed surface of wall/floor etc, to match with the existing surfaces of wall/floor complete all as specified & directed.

M&L for point wiring with 1.5 sq mm PVC insulated, unsheathed, stranded copper conductor (FRLS-H) cable single core 1100 Volt grade in and including rigid PVC conduit medium grade 20mm dia or more ISI Marked concealed conduit and conduit accessories and cutting chases of suitable girth where required on brick/concrete surface & making good disturbed surface, provision of GI/Pressed steel terminal switch box with plastic laminated sheet 3 mm thick fixed with brass screw and washers along with 1.5 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) as earth wire connected with main common earth dolly complete all as specified and directed for the following :-

One light/fan/bell/exhaust fan point controlled by one, one-way Piano type switch 5/6 Amp complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on same board controlled by one, one-way Piano type switch complete all specified and directed.

One 3pin/5pin 5/6 Amps socket out let on independent board controlled by one, one-way Piano type switch complete all specified and directed .

All as per item No 50 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor 1100 V grade PVC insulated FRLS-H but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm FRLS-H cable as earthwire complete all specified and directed.

S&F switch piano flush type white finish 5/6 Amps, single pole one way, 230 volts, 50 hz complete all as specified & directed.

S&F socket out let 2 pin 5/6 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.

S&F switch piano flush type white finish 15/16 Amps single pole one way, 230 volts, 50 hz all as specified and directed

S &F socket out let 5 pin 15/16 Amps & 3 pin 5/6 Amps flush type, 230 volts, 50 hz all as specified and directed.

S&F fan regulator socket type 100W, flush stepped type, electronic, compatible with BLDC fan complete all as specified and directed.

M&L ceiling rose 3 terminal / PVC/ polycarbonate, isolated body all as speccified and directed

S&F lamp holder (Angular/Straight), insulated body, with back plate for batten fitting complete all as specified & directed.

S&F LED bulb 9 watt B-22 suitable for holder complete all as specified and directed.

S&F LED tube light batten 20 watts 4 fts extruded polycarbonate housing, translucent diffuser with LED light source, 2000 lumen, natural white, surge protection range-2KV, voltage protection range 120-280 VAC with intergrated driver and surge protection complete all as specified and directed.

S&F Decorative ultra slim round profile LED Tube light fitiing with extruded polycarbonate, energy efficient for mirror light 9/10 Watt 2 ft with LED light source with uniform light output, fixed on site with all accessories all as specified & directed.

M&L for clamp made out of size 50 mm x 5 mm suitable for fitting or hanging of ceiling fan complete with nut, bolts, washers, etc complete all as specified and directed.

S&F Ceiling fan complete with three blades down rod, accessories 230 V, 1200mm sweep with minimum air delivery of 210 CFM (BLDC) complete all as specified and directed. Note: Old Ceiling fan to be deposited in MES store Yard

S&F Exhaust fan PVC body AC single phase 230/240 Volt of size 250 mm sweep with copper winding complete with louvers shutter including making whole and grouting of nut bolts etc and making good the disturbed sufaces of wall complete all as specified and directed. Note: Old Ceiling fan to be deposited in MES store Yard

S&F water heater storage type of capacity 25 Ltr, five star rated AC sinle phase 230 volts 50 Hz, vertical mounting type with stainless steel inner tank of approved colour, with adjustable temperature, plug top and Hot and cold PVC connection complete all as specified and directed.

S&F single pole & neutral plastic enclosure prewired power unit with 25 Amp rated MCB and 25 Amp rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board complete all as specified and directed

S&F LED 25 watt Building security light fitting mounting type made out of one piece in pressure die-cast aluminium housing with high efficient LED as lighting source and PC Cover separate compartment for driver,including bracket clamp and fixing accessories complete with electronic driver and all accessories. The fitting shall IP 66 protection, duly prewired complete all as specified and directed.

S&F sub main wiring two single core 6 sq mm PVC insulated unsheathed stranded copper conductor cable (FRLS-H) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade concealed in wall along with 6.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLS-H) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion complete all as specified and directed

-ditto- but of size 4.00 sqmm

S&F sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with suitable rated busbar complete all as specified and directed

S&F sheet metal enclosure double door type for MCBs DB SPN (Single pole and neutral) 240V AC 4 way with suitable rated busbar complete all as specified and directed

S&F MCB, SP, AC, 240 volts of 06 to 32 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F MCB, SPN, AC, 240 volts of 40 Amps capacity 10KA, 'B' series and making connections with suitable size of copper lugs complete all as specified & directed.

S&F in replacement of MCCB/MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surfacecomplete all as specified and directed.

S&F MCCB 100A, 15/16 KA, 4 Pole, 415 V, 50 Hz with fixed thermal magnetic release fixed in Vertical TPN complete all as specified and directed.

Supply, Installed & fix maintenance free earthing copper bonded steel earth rod of 10 feet long having diameter of 17.2mm with copper bonding thickness of 250 micron, UL listed, CPRI Tested at 25 KA fault current for one second and is provided with universal clamp made of SS earth enhancing compound shall be of 50kg/pit (resistivity is less than 0.12 Ohm meter) tested as per IEC 62561-7. The above arrangements shall be provided with heavy duty earth poly plastic pit cover of 6000 kg load bearing capacity (Size: 270 x 240 x 200mm) and FRLS insulated copper conductor of size 6 sqmm, single core cable drawn through and including light grade GI pipe of size 15 mm upto 7 mtr incl cutting and chases on wall and floor and aking good using PCC complete all as specified and directed.

Dismantling & taking out old unserviceable LT UG cable & Supplying & laying in replacement of LT UG cable (Conforming to IS 1554) ISI marked1.1 KV grade XLPE insulated PVC sheathed steel armoured aluminum stranded conductor in trenches/ducts/through HDPE pipe under roads of size 25 sqmm 4 core complete all as specifed and directed.

Excavation in trenches not exc1.5 mtr wide and not exc 1.5 mtr depth in any type of soil (soft/loose soil) including levelling of bottom surface to required level all as specified and directed.

Returning filling in trenches including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick all as specified and directed.

Removing excavated material from site to a distance n.exc 50 mtrs away and depositing where directed at a level n.exc 1.5 mtr above the starting point all as specified and directed.

M&L for double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/ floors/duct or fixed on walls/pole including all connections, accessories like socket, couplers, bends, etc for protection of LT cable XLPE grade 1100 volts complete all as specified and directed.

Labour and T&P for horizontal boring of hole passing through pavement/road/hardstanding by manual or mechanical means suitable for 50 mm bord complete all as specified and directed.

S&F GI tubing light grade ISI marked of 50 mm bore dia complete all as specified and directed.

Taking up or down galvanised steel tubing and connections of any size and type complete all as directed for following sizes :-

15 mm bore

20 mm bore

S&F or lay in trenches galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in trenches complete all as specified and directed of the following bore.

15mm bore

20 mm bore

S&F galvanised steel water tubing medium grade including all fittings such as bends, elbows, tees, reducers, sockets, union etc and laid in floor fixed on wall and ceiling complete all as specified and drected of size 20 mm bore

Drilling and tapping GI water mains 50mm bore (in position) for branch connections of the internal dia 20mm, complete all as specified and directed.

S&F straight plain brass ferrules (or connecting screws) screwed both ends and fixed to water mains for tapping branch connection of 20 mm bore pipe, complete all as specified and directed.

S&F Gun metal gate valve, ISI marked, with iron wheel head screwed both ends for iron pipe, fixed in repairs complete of size 20 mm bore

S&F desert cooler electric driven (single phase), having nominal air flow capacity of minimum 4000 CFM plastic body, densenest honeycomb cooling pads, minimum three speed copper wounded motor speed having 1350 RPM with blades, water tank capacity minimum 50 litres, submersible water lifting pump suitable to lift water upto 6 feet including Speed regulator, electrical cord three core and plug top 5 Amp complete alongwith stand, auto water supply as specified and directed.

VAIBHAV ENTERPRISES (BID ID -3509519)

RAJENDER CONSTRUCTION CO (BID ID -3503370)