Loading
Loading…
Loading…
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
12 Oct 2026, 6:30 pm
GE BARRACKPORE
Office of the GE BARRACKPORE, KOLKATA - 700120
REPAIRS/REPLACEMENT/RENEWAL OF JOINERY AND ALLIED WKS AT CERTAIN OTM ACCNS AT MILITARY STATION KANCHRAPARA UNDER GE BARRACKPORE
2026_MES_790449_1
8285/E8
Open Tender
Civil Works
Item Rate
180 days
BARRACKPORE
AS PER TENDER DOCUMENT
3 documents required · 3 mandatory
₹500
GE BARRACKPORE
₹70,000
Yes
21 Sept 2026
21 Sept 2026
14 Oct 2026
21 Sept 2026
12 Oct 2026
5 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 sqm complete all as specified and as directed.
Note : Rate shall be deemed to be include for cutting holes/demolition of masonry walls etc for taking down chowkhats and making good the damaged surfaces | 20 | Each | - | - |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 sqm but not exceeding 4 sqm each complete all as specified and as directed.
Note: Rate shall be deemed to be include for cutting holes/demolition of masonry walls etc for taking down chowkhats and making good the damaged surfaces. | 25 | Each | - | - |
| 3 | Taking down shutter of any description area n.exc 1 sqm each including builders hardware complete all as specified and as directed. | 12 | Each | - | - |
| 4 | Taking down shutter of any description area exc 1 sqm but n exc 2 Sqm each including builders hardware complete all as specified and as directed. | 40 | Per leaf | - | - |
| 5 | Taking down shutter of any description exc 1 Sqm n exc 2 Sqm each and refixing in the same opening after necessary repairs easing and adjusting complete all as specified and as directed.
Notes: - (i) Necessary builder's hardware for repair shall be measured & paid separately as 'Supply Only' under relevant item.
(ii) Work to be carried out on daily basis as per complaint received from users. | 125 | Each | - | - |
| 6 | S & F pressed steel frames for doors of size 105 mm x 60 mm x 1.25 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and as directed.
Note: PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) for filling the hollow portion of frame and applying 02 shop coats of bituminous paint to back of chowkhats shall be include in quoted rate complete all as specified and as directed. | 75 | Rm | - | - |
| 7 | S & F pressed steel frames for doors of size 125 mm x 60 mm x 1.25 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and as directed.
Note: PCC 1:3:6 type C-0 (using 12.5mm graded crushed stone aggregate) for filling the hollow portion of frame and applying 02 shop coats of bituminous paint to back of chowkhats shall be include in quoted rate complete all as specified and as directed. | 50 | Rm | - | - |
| 8 | S & F factory made solid PVC door frame of size 40mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed. | 95 | Rm | - | - |
| 9 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. | 45 | Sqm | - | - |
| 10 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panel will be of wire gauze. The wire gauze shall be wrapped on an additional square 8mm MS solid tube and this tube shall be welded to MS tubes. The wire gauze shall be stretched to tighten firmly to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVS sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and as directed.
Note: Expanded aluminium wire mesh shall be measured and paid separately | 16 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.33 MB
BOQ_886111.xls
BOQ • 0.40 MB
Tenderdoc_8285.pdf
Tender Documents • 1.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .