C/O Tehsil Building at Jaisinghpur.

Amount

Excavation in foundation and trenches in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, pick jumper work, blasting work both in soft and hard rock, chiseling / wedging out of rock (Where blasting is prohibited) or any other mixed varity of soil including shoring strutting de-watering and pumping or bailing out water (surface and sub soil water) upto any heights/depths or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the serviceable and un-serviceable materials clear from the edges of excavation and then returning the stacked soil in 15cm (fifteen centimeters) layers where required into plinth and side of foundation etcetera, consolidating each deposited layer by ramming & watering and then disposing of all surplus un-serviceable excavated earth as directed within all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machineries and disposed materials to be neatly dressed and leveled other incidentals to complete the work as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Filling in Plinth with sand under floors including watering ramming and consolidating and dressing complete to the entire satisfaction of the Engineer-in-charge within all leads and lifts of materials and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetres) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetres), so as to give a fair finish including centring, shuttering strutting and propping etcetera with wooden battens and ballies heights of propping and centring in all height/depth below supporting floor to ceiling upto any height and removal of the same for in-situ reinforced concrete and plain concrete work as per H.P.P.W.D specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Foundation, footings basis of columns etc. and mass concrete.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like upto 200mm. In thickness

Columns, pillars, posts and struts Square, rectangular or polygonal in plan.

Beams, cantilever, girders and lintels Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor

Edges of slabs and breaks in floors and walls under 20cm wide

Providing and laying cement concrete1:6:12 (One cement; Six sand; Twelve graded broken/crushed stone aggregate 40mm (Forty millimetres) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth under floor in all depth as per H.P.P.W.D specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design, mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetres) with cement contents not less than of 330 kg (Three hundred thirty kilogram) per cubic metre to give an smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concrete as per H.P.P.W.D specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design, mix to obtain the minimum compressive strength of 20N/mm2 (Twenty newton per square millimetres) with cement contents not less than of 330 kg (Three hundred thirty kilogram) per cubic metre to give an smooth surfaces mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever upto floor twolevel as per H.P.P.W.D specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/ mm2 (Twenty newton as per square millimetres) with cement contents not less than of 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Columns, pillars, posts and struts in all depth/thickness upto all floors levels for all heights as per H.P.P.W.D specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing Tor steel reinforcement for RCC work including bending, binding and placing in position complete up to all floor level with cost of binding wire including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying precast cement concrete hollow block masonry with cement concrete blocks of size 40cm x 19cm x20 cm i/c quion block jamb blocks and closers etc. made of cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) laid with cement mortar 1:6 (1 cement : 6 sand) i/c curing complete in super structure upto floor two level. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Boulder filling dry hand packed tightly under floor. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 40 mm thick 2nd class Kail wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 40 mm (Forty millimetre) thick second class Deodar wood wire gauge shutters using galvanized MS wire gauge of IS gauge designation 85G with wire of dia 0.56 mm (Zero decimal five six millimetre) for doors, windows and clear story windows including bright finished black enameled iron hings with necessary screws as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 25mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete). The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. plain grills of required pattern in window frames etcetera with M.S.Flats,20x5mm ( twenty into five millimetre) and 8 x 8 mm ( eight into eight millimetres) solid square or round bars, fixing to frames with round headed bolts and nuts or by screws or welding plain grillas as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing anodized aluminum sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etcetera complete 300 X 16 mm (three hundred into sixteen millimetre) size as per specifications approved drawing, design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete 250x10mm (Two hundred fifty into ten milimeter) size. as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. Government.

125 mm (one hundred twenty five millimetres).

100 mm (one hundred millimetres).

Providing and fixing 150mm oxidized M.S. single acting spring hinges with necessary screws etc. complete. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. hooks and eyes with necessary screws etcetera complete 200 mm (two hundred millimetre) size as per specifications approved drawing , design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying Duro stone vetrified tiles (300x300mmx8mm) in grey/coloured of required shade in skirting risers of steps and dados on 12mm thick cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 100mm (One hundred milimtres)diameteres on wall face P.V.C. (D-plast) rain water pipes of working pressure not less than 4.50 kgs(Four decimal five zero kilograms) per square centimetre including filling the joints with approved adhesive complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing on wall face P.V.C. (D-plast) acessories of Supreme/Kisan/Astral for rain water pipes including filling the joints with approved adhesive complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

PVC Plain bend 150mm dia

PVC concrete type bend 150mm dia

Providing and fixing angle iron door,window,clerestory window frame manufactured from steel iron section of 40X40X6 mm,thickness including hinges jamb,lock jamb,beed and if required angle thrashold ofmild steel angle 50X25 mm welded or rigidly fixed by mechanical means,lugs with split end tails to each jamb including steel butt hinges 2.5 mm thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after preteatment of the surface as directed by Engineer-in- Charge. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing steel glazed doors,windows and ventilators of standerd rolled steel sections ,joints mitred and welded with 16x3.15 mm lugs 10 cm.long embedded in cement concrete blocks 15 cmx10cmx10cm size of 1:3:6(1 cement:3 sand:6 graded stone aggregate 20mm nominal size)or with wooden plugs and screws or rawl plug and screws or with fixing clips or with bolts and nuts as required and iron fittings,including providing and fixing of glass panes with glazing clips and special metal sesh putty of approved make complete including applying a priming coat of red lead paint. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government. Side hung windows

Painting two coats (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matter with enamel paint other than white as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting as required with ready mixed paint brushing wood pink primer as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Painting two coats (excluding priming coat)on new wood and wood based surface under coat with enamel and finishing coating with flat oil paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter,sand papering and stopping With paint other then white and the direction of the Engineer-in Charge including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

6mm cement plaster to ceiling in cement mortar 1:3 (one cement : three sand) as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

15 mm (Fifteen milimetre) thick cement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to all floor level including arises, internal angles, chamfers and /or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth with cement mortar 1:6 (One cement isto six sand) as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals.The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

20mm Cement plaster in single coat on rough side of brick/stone masonry for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:5 (One cement isto five sand) as per specification approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana and all type of taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropping, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete. as per specifications approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Distempering with dry distemper of approved brand and manufacture(Two coats)and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on undecorated wall surfaces (Two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing under layer for plinth protection of 75 mm (Seventy five milimetre) thick unconsolidated) bed of dry brick stone broken aggregate 40mm (Forty Milimetre) nominal size well rammed and consolidated and grouted with fine sand including preparation of ground within all leads, lifts of material and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing plinth protection 50mm (Fifty milimetre) thick with cement concrete 1:3:6 (One cement :Three sand: Six graded stone aggregate 20mm (Twenty milimetre)nominal size including finishing the top surface of concrete smooth within all leadsand lifts of material and other incidentals. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm in cement mortar 1:6 (1 Cement : 6 Sand) and inside plastring with cement plaster 1:3 (1 Cement:3 Sand) including earth work and laying 10 cm cement concrete in 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate) of 40 mm nominal size) and 7.5 cm cement concrete 1:2:4 (1 Cement : 2 Sand : 4 Graded stone aggregate of 20 mm nominal size) and finished with a floating coat of neat cement complete as per standard design. The rate is including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Ajay Kumar