Supply and Installation of Solar Minimast Lights at Various 21 ST Colonies in Chokkad Division

Amount

Civil works

2.6.1 : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.1.3 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

2.25 : Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Electrical

od112954/2023_2024 : Supply installation testing and commissioning of Octagonal GI Pole of 6 Mtr Height, 130mm bottom , 70 mm top dia, 3mm thickness. Base plate dimension 200 x 200 x 12 mm suitable for windspeed as per IS 875 Part III fixed head frame including luminary carriage suitable to install 4 nos. of luminaries in symmetrical arrangement . Light arm length 1 mtr. Light arm dia 48mm with arrangements for affixing battery pack

od112955/2023_2024 : Solar Charge Controller Current & Efficiency - 10A_24W-30W > 90%

od113403/2023_2024 : Supply Conveyance, installation, testing and commissioning of 600Wp Solar PV Module poly crystalline<br>type of solar cell efficiency of minimum 14% with IP 65 protection Junction box with mounting holes,<br>operating temperature range -40C to 85C , maximum system voltage of 600V DC, maximum reverse<br>current of 14A and maximum surface load capacity of 5400Pa . TUV Certified IEC 61215-2, IEC61730<br>

od113404/2023_2024 : Supply Conveyance, installation, testing and commissioning of 3072Wh LiFePO4 (Lithium<br>Ferro Phosphate) rechargeable battery pack (12.8V 60Ah- 4no.s ) with over charge and deep discharge protection. (Make: Optimum nano/ Ubetter/ Entrix/Approved make)

od113577/2023_2024 : Supply Conveyance, installation, testing and commissioning of 24W DC LED street light output greater than 115lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Osram and Aluminium<br>pressure die-cast Powder coated housing,acrylic cover complete, RoHS compliant, duly wired up for use on DC supply. Driver compartment should be seperately accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer).<br>Optimized thermal design to ensure maximum life to LED and inbuilt MPPT Charge Controller of Rated<br>Capacity 12.8V, 7.5V solar charging current upto 7.5 Amps continuous designed to withstand the application of reverse battery polarity and reverse panel polarity

90.6.5.5 : Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

od114855/2023_2024 : supply and fixing of Inter connecting wires and accessories for the solar light system.

od114856/2023_2024 : Supply and installation of battery box and solar moulding structure made by material that are durable, resistant to corrosion & abrasion and highly stable in heat.

SP BUISINESS ASSOCIATES

KALLOOR ELECTRONICS AND LIGHTING PVT LTD

Bidder Name

KALLOOR ELECTRONICS AND LIGHTING PVT LTD

RAFEEQUE V.P.

SP BUISINESS ASSOCIATES