CONSTRUCTION OF VIDEO CONFERENCE COURT ROOM (G.F.) NEAR L-TYPE BARRACK, R.O.PLANT NEAR VIR BHAGATSINH YARD, & 2 NO. 50,000 LITER SUMP & PUMP ROOM, AT NEW SABARMATI CENTRAL JAIL AHMEDABAD INCLUDING ELECTRICAL & FURNITURE WORK (First attempt) (SBD)

NAME OF WORK :- CONSTRUCTION OF VIDEO CONFERENCE COURT ROOM (G.F.) NEAR L-TYPE BARRACK, R.O.PLANT NEAR VIR BHAGATSINH

YARD, & 2 NO. 50,000 LITER SUMP & PUMP ROOM, AT NEW SABARMATI CENTRAL JAIL AHMEDABAD INCLUDING ELECTRICAL &

FURNITURE WORK.

STATEMENT SHOWING AT APROXIMATE A QUANTITY FOR THE ITEM OF ABOVE WORK TO BE CARRIED OUT AND APPROXIMATE COST PUT TO THE TENDER FOR

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Excavation for foundation upto 1.50mt. depth including sorting out and 203.00 CMT 115.92 RS: One Hundred 23

1 stacking of useful materials and disposing of the excavated stuff upto all Fifteen and Paise Ninty

lead &Lift etc. complete in loose or soft soil. Two only

Excavation for foundation in loose or soft soil 1.5 m. to 3.0 mt depth 31.00 CMT 128.52 RS: One Hundred 3

2 including sorting out and stacking of useful materials and disposing of the Twenty Eight and Paise

excavated stuff upto any Lead and Lift. Fifty Two only

Excavation for foundation from 1.50mt. to 3.00 mt. depth including sorting 69.00 CMT 160.77 RS: One Hundred 11

3 out and stacking of useful materials and disposing of the excavated stuff Sixty and Paise Seventy

upto all lead etc. complete in dense or hard soil. Seven only

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 18.69 CMT 2976.00 RS: Two Thousand 55

4 6- aggregates 40 mm nominal size) and curing complete excluding cost Nine Hundred Seventy Six

of formwork in (A) Foundation and Plinth only

Providing and laying cement concrete 1:4:8 ( 1 cement ; 4 coarse sand; 8 22.00 CMT 2653.67 RS: Two Thousand Six 58

crushed stone aggregates 40mm nominal size) and curing complete Hundred Fifty Three and

5 excluding cost of form work in Foundation and plinth. Paise Sixty Seven only

Filling avaliable excavate earth ( excluding rock). In trenches, plinth sides 127.00 CMT 129.10 RS: One Hundred 16

of foundations etc. in layers not exceeding 20 cms. In depth consolidation Twenty Nine and Paise

6 each deposited layer by ramming and watering. Ten only

Filling In Foundation & Plinth With Murrum Or Selected Soil In Layers Of 18.00 CMT 286.20 RS: Two Hundred 5

7 20Cms Th. Inclu.. Watering , Ramming & Consolidating Etc.. Complete Eighty Six and Paise

FILLING in plinth with SAND under floors including watering, raming 26.00 CMT 455.63 RS: Four Hundred 11

8 consolidating and dressing etc. complete. Fifty Five and Paise Sixty

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Applying general insecticide pest control treatment to floors, cupboards 248.00 SMT 88.40 RS: Eighty Eight and 21

etc including labour material etc. complete. Using Imidacloprid 30.5 SCas Paise Forty only

as Per 6313part -II (0.075 % concentration by mass) is recommended

9 ml chemical diluted with 5 litres of water application 0.5 litre

chemical/Sqm if surface is recommended as per I.S.

Providing & laying Controlled CEMENT CONCRETE M-300 and curing 26.00 CMT 5399.82 RS: Five Thousand 1 40

complete including cost of formwork of Plywood only with fair finish & Three Hundred Ninty Nine

Proping must be of steel only so as to give a fair finish but excluding the and Paise Eighty Two

cost of reinforcement in FOOTING base of columns and Mass concrete. only

Rates are Inclusive of Providing and Mixing Plasticiser of Approved Make

10 & In Proportion As Per Mix Design..All formwork must be of plywood & steel

proping only. Including the cost of form work of Plywood only with fair

finish & Proping must be of steel only so as to give a fair finish.

Providing and laying controlled cement concrete M-300 including 28.00 CMT 8611.11 RS: Eight Thousand 2 41

finishing smooth with curing complete Including the cost of form work of Six Hundred Eleven and

Plywood only with fair finish & Proping must be of steel only so as to give a Paise Eleven only

fair finish.but excluding cost of reinforcement Rate also inclusive of

providing & mixing of plasticiser as per manufactured recommanded

propotion concrete work in VERTICAL & HORIZONTAL FINS / PADADI for

G.F. FOR SUMP WALL

Providing & laying controlled cement concrete M -300 including finishing 6.00 CMT 10888.36 RS: Ten Thousand 65

smooth with curing completeIncluding the cost of form work of Plywood Eight Hundred Eighty

only with fair finish & Proping must be of steel only so as to give a fair finish. Eight and Paise Thirty Six

but excluding the cost of reinforcement in COLUMN for GROUND only

FLOOR.Rates are Inclusive of Providing and Mixing Plasticiser of Approved

Make & In Proportion As Per Mix Design.

Providing & laying Controlled CEMENT CONCRETE M-250 and curing 16.00 CMT 4595.51 RS: Four Thousand 73

complete including cost of formworkof plywood only with fair finish & Five Hundred Ninty Five

proping must be of steel only so as to give a fair finish but excluding the and Paise Fifty One only

cost of reinforcement in column FOOTING base of columns and Mass

concrete. Rates are Inclusive of Providing and Mixing Plasticiser of

Approved Make & In Proportion As Per Mix Design.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing & laying Controlled CEMENT CONCRETE M-250 and curing 7.00 CMT 9014.12 RS: Nine Thousand 63

complete including cost of formworkof plywood only with fair finish & Fourteen and Paise

proping must be of steel only so as to give a fair finishbut excluding the Twelve only

14 cost of reinforcement in column UP TO PLINTH Rates are Inclusive of

Providing and Mixing Plasticiser of Approved Make & In Proportion As Per

Providing and laying Controlled cement concrete M-250 and finishing 11.00 CMT 7052.93 RS: Seven Thousand 77

smooth with curing etc.. complete including the cost of formwork of Fifty Two and Paise Ninty

plywood only with fair finish & proping must be of steel only so as to give a Three only

fair finish but exculding the cost of reinforcement for PLINTH BEAMS.Rates

are Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

Providing & laying control cement concrete M 250 including finishing 3.00 CMT 5950.48 RS: Five Thousand 17

smooth with curing complete including cost of formwork of plywood only Nine Hundred Fifty and

with fair finish & proping must be of steel only so as to give a fair finishbut Paise Forty Eight only

16 excluding the cost of reinforcement in COPING Rates are Inclusive of

Providing and Mixing Plasticiser of Approved Make & In Proportion As Per

Provinding and laying Controlled cement concrete M-250 and finishing 9.00 CMT 10404.22 RS: Ten Thousand 93

smooth with curing etc. complete including the cost form work of Four Hundred Four and

plywood only with fair finish & proping must be of steel only so as to give a Paise Twenty Two only

fair finishbut excluding the cost of reinforcement for RCC work in COLUMN

FOR Ground floor .Rates are Inclusive of Providing and Mixing Plasticiser of

Approved Make & In Proportion As Per Mix Design.

Providing and laying Controlled cement concrete M-250 finishing smooth 31.50 CMT 7702.61 RS: Seven Thousand 2 42

with curing etc.complete Including the cost of form work of Plywood only Seven Hundred Two and

with fair finish & Proping must be of steel only so as to give a fair finish. but Paise Sixty One only

excluding the cost of reinforcement for R.C.C. work in SLAB having

thickness of 13 cm and upto 15 cm for GROUND FLOOR. Rates are

Inclusive of Providing and Mixing Plasticiser of Approved Make & In

Proportion As Per Mix Design.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing and laying Controlled Cement Concrete M-250 for R.C.C. 14.00 CMT 8759.31 RS: Eight Thousand 1 22

BEAMS having any cross sectional area including finishing smooth with Seven Hundred Fifty Nine

curing etc.complete including cost of formwork of Plywood only with fair and Paise Thirty One only

finish & Proping must be of steel only so as to give a fair finish but

excluding the cost of reinforcement for Ground Floor. rates are inclusive of

providing and mixing plasticizer of approved make in proportion as per

Providing & laying controlled cement concrete M 250 for RCC LINTEL 5.00 CMT 8448.87 RS: Eight Thousand 42

including finishing smooth with curing etc complete including the cost of Four Hundred Forty Eight

formwork of plywood only with fair finish & proping must be of steel only so and Paise Eighty Seven

as to give a fair finishbut excluding the cost of reinforcement for GROUND only

FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of Approved

Make & In Proportion As Per Mix Design

Providing & laying controlled cement concrete M 250 for RCC LINTEL 3.00 CMT 5950.48 RS: Five Thousand 17

BEND including finishing smooth with curing etc complete including the Nine Hundred Fifty and

cost of formwork of plywood only with fair finish & proping must be of steel Paise Forty Eight only

only so as to give a fair finish but excluding the cost of reinforcement for

GROUND FLOOR. Rates are Inclusive of Providing and Mixing Plasticiser of

Approved Make & In Proportion As Per Mix Design

Providing and laying controlled cement concrete M-250 for 4.00 CMT 9436.09 RS: Nine Thousand 37

reinforcement concrete CHAJJAS.not exceeding 10cm thickness up to Four Hundred Thirty Six

floor two level including finishing the exposed surface with cement mortar and Paise Nine only

1:3 ( 1 cement : 3 fine sand) to give a smooth surface. including

formworkof plywood only with fair finish & proping must be of steel only so

22 as to give a fair finish & curing etc. complete excluding cost of

reinforcement Rates are Inclusive of Providing and Mixing Plasticiser of

Approved Make & In Proportion As Per Mix Design

Providing and laying Controlled cement concrete M-200 and finishing 11.00 CMT 4042.29 RS: Four Thousand 44

smooth with curing etc.. complete EXCLUDING the cost of formwork with Forty Two and Paise

fair finish & proping must be of steel only so as to give a fair finish but Twenty Nine only

exculding the cost of reinforcement for GRID SLAB having any cross

sectional area for FOUNDATION AND PLINTH.Rates are Inclusive of

Providing and Mixing Plasticiser of Approved Make & In Proportion As Per

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing , Fabricating and fixing M.S. GRILL/GATE of approved pattern 2680.00 KG. 74.92 RS: Seventy Four 2 00

fabricated from M.S. flat,square bars, round bars,c-channel, box pipe as and Paise Ninty Two only

per detail Drawings. Rate is including welding. Rate is also including two

coats of Oil paint and one coat of yellow Zinc primer coat of approved

24 brand only oil paint shall be Luxol Enamel paint of Berger Paint india

limited. or asian paint apcolite premium gloss Enamel of asian paint or

Dulux premium gloss enamel of dulux paint only.

Providing T.M.T, FE - 500D Bar Reinfor Cement for R.C.C.work including 16338.30 KG. 75.46 RS: Seventy Five 12 32

25 cutting, bending, binding and placing in position etc.complete for All and Paise Forty Six only

Floors. (Brand as approved by GSPHC)

Brick work using common burnt clay building bricks having crushing 30.00 CMT 3981.21 RS: Three Thousand 1 19

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement Nine Hundred Eighty One

26 Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional Bricks and Paise Twenty One

Brick work using common burnt clay building bricks having crushing 70.00 CMT 4253.46 RS: Four Thousand 2 97

strength not less than 35 Kg/Sq.cm.in superstructure above plinth up to Two Hundred Fifty Three

27 floor two level in conventional bricks in cement mortar 1:6(1-cement;6- and Paise Forty Six only

fine sand) for Ground Floor.

HALF BRICK masonary in common brunt clay building bricks having 9.00 SMT 646.70 RS: Six Hundred 5

28 crusing strength NOt less than 35 kg./sq.cm.in cement mortar 1:4 (1 Forty Six and Paise

cement : 4 coarse sand ) (conventional bricks for GROUND FLOOR) Seventy only

Providing 10mm thick cement plaster in single coat on ceilings for interior 138.00 SMT 199.88 RS: One Hundred 27

plastering and finished even and smooth in C.M.1:3(1-cement;3-sand) Ninty Nine and Paise

29 including finishing with a floating coat of neat cement slurry at Ground Eighty Eight only

Providing 15mm thick cement plaster in single coat on brick or concrete 401.00 SMT 203.34 RS: Two Hundred 81

wall for interior plastering and finished even and smooth in cement mortar Three and Paise Thirty

30 1:4(1-cement;4-sand) including finishing with a floating coat of neat Four only

cement slurry at Ground Floor.

Provinding 20 mm thick SAND FACED cement PLASTER on walls above 150.00 SMT 297.68 RS: Two Hundred 44

ground level consisting 12 mm thick backing coat of C.M. 1: 3 ( 1 cement : Ninty Seven and Paise

31 3 sand ) and 8mm thock finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) Sixty Eight only

etc. Complete for any height.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Synthetic Texture Plaster with Double Coat Smooth plaster : Providing 308.00 SMT 463.26 RS: Four Hundred 1 42

20mm thick cement plaster in single coat plastering upto for Outside and Sixty Three and Paise

finished even and smooth in (i) Cement mortar 1:3 (1-cement : 3-sand) as Twenty Six only

Base Coat and providing 2-3 mm thick synthetic texture plaster of

approved texture including cost of all rate are materials, labour,

32 conveyance, loading and unloading, taxes, royalties, scaffolding,

watering etc.complete for any Height as per Drawing and instructions of

Engineer -in -Charge.(Material Shall be Used as Approved By GSPHCL

Providing 10mm thick cement Plaster in single coat of interior plastering 320.00 SMT 210.99 RS: Two Hundred Ten 67

and finished even and smooth in cement mortar 1:3(1-cement;3-sand) & and Paise Ninty Nine only

finishing with a floating coat of neat cement slurry including providing and

mixing I.S.I make water proofing material in cement mortar in proportion

recommended by the manufacturer for all floors. Including finishing with a

floating coat of neat cement slurry for all floors.

Providing CEMENT VATA (10cm. X 10 cm.size) quarter round in cement 64.00 RMT 23.45 RS: Twenty Three 1

34 mortar 1:1 (1-cement;1-sand) including neat cement finishing, watering and Paise Forty Five only

Providing and fixing chicken wire mesh of 20 guage with necessary 69.00 SMT 64.06 RS: Sixty Four and 4

screws and nails at joints or crackes of brick work or RCC work, as per Paise Six only

35 drawing, spicification and direction of Engineer in charge.wire-mesh jali

shall confirm to relevant IS specification.

Providing and laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile 93.00 SMT 1440.20 RS: One Thousand 1 33

flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 Four Hundred Forty and

coarse sand) on new surface orfixing on existing flooring by adhesive Paise Twenty only

36 including dismentaling of existing flooring and material jointed with color

cement slurry including finised with flush pointing & cleaning the surface

etc. complete for light shade

Providing and laying 24" x 24" Double Charge vitrified 8 to 10 mm thick tile 12.00 SMT 1392.20 RS: One Thousand 16

for skirting,risers of steps and dedo over 20 mm (average) base of Three Hundred Ninty Two

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface orfixing on and Paise Twenty only

existing flooring by adhesive including dismentaling of existing flooring

and material jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for light shade

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Provinding and Laying 18 mm thick Granite Stone Slab Flooring over 2.00 SMT 2131.98 RS: Two Thousand 4

20mm thick average base of C.M. 1:6 (1cement : 6 coarse sand) laid and One Hundred Thirty One

38 jointed with grey cement slury including Rubbing and Polishing etc. and Paise Ninty Eight

Complete for All Floors. only

providing & laying granite stone slab (18mm thick) in risers of steps , 2.00 SMT 2325.18 RS: Two Thousand 4

dedo and pllars laid on 10mm thick cement mortar 1:3(1 cement :3 corse Three Hundred Twenty

sand) and jointed with gray cement slurry including rubbing & polishing Five and Paise Eighteen

39 complete. Rate are inclusive of Rounding the exposed surface as per only

direction of Engineer In Charge.

Providing and Fixing Granite Telephonic Black Colour 15 to 18 mm thick 13.00 SMT 2428.00 RS: Two Thousand 31

for jambs and sills of doors & windows using neat cement slurry laid over Four Hundred Twenty

20 mm average base of cement mortar 1:1(1 cement:1 Coarse Sand) and Eight only

jointed with grey cement slurry including racking(Tancha Work) rubbing

40 and polishing,scaffoldings,tools and tackles,scaffolding etc.

complete(with base of neat cement) as per direction of Engineer in

charge including rounding the exposed edges as directed.

Providing and laying 25mm thick DIMOND POLISHED KOTA STONE SLAB 18.00 SMT 1081.90 RS: One Thousand 19

FLOORING over 20mm average thick base of cement mortar 1:6 ( 1 Eighty One and Paise

41 cement 6 coarse sand) laid over & jointed with grey cement slurry Ninty only

including rubbing & polishing etc. Complete.

Providing and laying 25 mm thick Dimond polished KOTA STONE SLAB in 4.00 SMT 1275.10 RS: One Thousand 5

RISERS of steps, dedo , skirting and pilllars laid to 10 mm thick cement Two Hundred Seventy Five

42 mortar 1:3 ( 1 cement : 3 coarse sand) & jointed with grey cement slurry and Paise Ten only

including rubbing & polishing etc.

Providing and Laying Mirror Polished 25 mm thick Double Diamond 70.00 SMT 982.83 RS: Nine Hundred 68

Polished Kota Stone Flooring over 20mm thick base of cement mortar 1 : 6 Eighty Two and Paise

(1-Cement : 6-Coarse Sand) laid over and jointed with grey cement slurry Eighty Three only

including Rubbing and Polishing etc. Complete. (A) 25mm Thick. In Green

Colour. Rate Are Inclusive of Single Piece & Making 3 Line Groove and

Moulding Of Outer edge as Directed By Engineer In Charge.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing and Laying Mirror Polished 25 mm thick Double Diamond 4.00 SMT 1176.03 RS: One Thousand 4

Polished SLAB in RISERS of steps, dedo , skirting and pilllars laid to 10 mm One Hundred Seventy Six

44 thick cement mortar 1:3 ( 1 cement : 3 coarse sand) & jointed with grey and Paise Three only

cement slurry including rubbing & polishing etc

Providing & Laying integrated cement based proprietary water proofing 145.00 SMT 855.11 RS: Eight Hundred 1 23

treatment of required thickness over the roof including 10mm thick Fifty Five and Paise

45 cement mortar 1:3 and CHINA MOSAIC fitting and finally finishing the Eleven only

surface with white cement slurry and sloping out terrace slabs with

Following specification laid to required slope not flatter than 1:80 ( the

thickness of water proofing treatment near rainwater outlet or the lowest

point of the finished slope shell not to be less than 45 mm. Including

treating the vertical surface of the parapet wall up to 20 cm. height

above finished level of terracing including finishing top with joint less

water proofing plaster curing testing etc, completed. Rate is Including

years performance of guarantee bond to be given on stamp paper ( no

extra shall be paid for increase in thickness for proper slope ).

(A) Applying & grounting a slurry coat of neat cement using 2.75 kg/smt.

of cement admixed with proprietary water proofing compound

confirming to IS 2645 and 10mm. Thick water proofing cement plaster in

cement mortar in 1:3.over the RCC slab including cleaning the surface

before treatments.

(B) Laying cement concrete using broken brick bat using 25 mm to 40 mm

size with 50% of cement mortar 1:4 ( 1 cement : 4 corse sand )over 10mm.

thick water proofing cement plaster in cement mortar in 1:3 admixed with

proprietary water proofing compound conforming to IS 2645 required

slope and treating similarly the adjoining walls up to 200 mm height

including rounding of junction of walls.

(C) After two days of proper curing applying a second coat of cement

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

(D) Finishing the surface with china mosaic peices laid on 10 mm thick

joint less cement mortar of mix 1:3 ( 1 cement : 3 sand) admixed with

proprietary water proofing compound confirming to IS 2645 and finally

finishing the surface with trowel with neat cement slurry .

(E) The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing for final test. All above operation

to be done in order and as directed and specified by the engineer in

Providing, Supplying and Fixing of 32mm (Total) Thick Single Flush Door 11.00 SMT 8976.41 RS: Eight Thousand 98

Shutter with 1mm Thick Laminates on Both Side of Shutter. Making / Nine Hundred Seventy Six

Construction of Flush Door is with Pine or southern Yellow Pine Filler and and Paise Forty One only

2.5mm core veneer Both Side and 0.4mm Face Veneer on Both Side with

Lock rail on Center. Flush Door Provide with Teak wood beading patti

(32mm X 12mm) on Peripheries of Flush Door with Door Frame of Non Teak

Solid Wood of size 120mm x 65mm with Chemically Treated and

Seasoned Including Paint Matching with Laminates. Frame & Flush door

shutter having 5 year warranty against attack of biological agent like

46 termite, borers, decay, fungi and harmful insects also warranty against

seasoning related issues like crack, bending, twisting, warping. Laminates

on shutter shall be press by cold press method. Shutter shall be brought to

site in packed PVC bags & pvc coating shall be removed on completion

of work in such a way that shutter & Frame is free from nail mark & any

Providing and fixing Alluminium section window having extruded 11.00 SMT 1568.27 RS: One Thousand 17

Aluminum Colour anodized section frame, Main outer size 95mm x 24mm x Five Hundred Sixty Eight

1.17mm @ wt.of 0.738 Kg/mt horizontal Three track member size 92mm x and Paise Twenty Seven

31.75mm x 1.30mm,@ Wt. 1.07 Kg/mt), vertical member of size 92mm x only

31.75mm x 1.50mm ,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal

member size 40 mmx18mm x1.29mm ,@ wtof 0.456 Kg/mt), vertical

47 member of size 40mm x 18mm x 1.29 mm ,@ wt.of 0.456Kg/mt/ with 5 mm

thick transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details including one mosquitoe jali shutter With Both Side

Locking Arrangment.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Finishing Ceilling/Slop Surface with Plastic Emulsion Paint on Ceilling/Slop 138.00 SMT 186.73 RS: One Hundred 25

Surface (two coats) to give an required shap even shade after throughly Eighty Six and Paise

brushing the surface to remove all dirt and remains of loose poweder Seventy Three only

material etc. complete. Rate are inclusive of applying two coat of lapy

(Putty) and one coat of primer on new Ceilling/Slop Surface to give and

48 even shade including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

smooth.putty,primer & paint shall be as per approved list of GSPHCL

Finishing Wall with Plastic Emulsion Paint on Wall Surface (two coats) to 337.00 SMT 176.33 RS: One Hundred 59

give an required shap even shade after throughly brushing the surface to Seventy Six and Paise

remove all dirt and remains of loose poweder material etc. complete. Thirty Three only

Rate are inclusive of applying two coat of lapy (Putty) and one coat of

primer on new wall surface to give and even shade including thoroughly

49 brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth. putty,primer & paint shall be as per approved

Finishing wall with weather proof exterior emulsion paint on wall surface 522.00 SMT 147.68 RS: One Hundred 77

(two coats) over and above applying One Coat Of Primer to give an Forty Seven and Paise

required shape even shade after thoroughly brushing the surface to Sixty Eight only

50 remove all dirt, and remains of loose powdered materials.etc complete.

primer and paint make as per the approved list of GSPHCL

Providing and Fixing concealed centre point to wall ceiling and floor 6.00 RMT 202.97 RS: Two Hundred 1

CPVC ( SDR 13.5) poipe having National sanitation foundation ( NSF) seal Two and Paise Ninty

for potable water of following dia. Nominal bore tube fittings and clamps Seven only

including, making good the wall,ceiling and floor etc complete.Pipe shall

be concealed or open as per mentioned in tender description.Pipe shall

be approved make of GSPHCL list (20 mm inside dia).

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing and Fixing concealed centre point to wall ceiling and floor 12.00 RMT 247.25 RS: Two Hundred 2

CPVC ( SDR 13.5) poipe having National sanitation foundation ( NSF) seal Forty Seven and Paise

for potable water of following dia. Nominal bore tube fittings and clamps Twenty Five only

including, making good the wall,ceiling and floor etc complete.Pipe shall

be concealed or open as per mentioned in tender description.Pipe shall

be approved make of GSPHCL list (25 mm inside dia).

Providing and fixing concealed or open center point to wall ceiling & 18.00 RMT 437.66 RS: Four Hundred 7

floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) Thirty Seven and Paise

seal for potable water of following dia. nominal bore tube fittingswith Z Sixty Six only

patti (Minimum 1.6mm thick) with 6mm Dia U Clamp with washer for

Vertical water supply pipe. Pipe shall be concealed or open as mention in

tender description. Pipe shall be as per approved make of GSPHCL make

list (40 mm inside dia).

Providing & Fixing concealed centre point to wall ceiling and floor CPVC ( 50.00 RMT 1312.94 RS: One Thousand 65

SDR 13.5) pipe having National sanitation foundation ( NSF) seal for Three Hundred Twelve

54 potable water of following dia. Nominal bore tube fittings and clamps and Paise Ninty Four only

including, making good the wall,ceiling and floor etc complete. 65 mm

Providing and fixing to wall celling and floor 10.0 kgf/sqcm working 60.00 RMT 332.91 RS: Three Hundred 19

pressure polythelene pipes of the following outside diameter, low density, Thirty Two and Paise

55 complete with special flange compression type fittings, wall clips etc. Ninty One only

making good wall ceiling and floor (G) 110 mm diameter

Providing supplying & fixing in position of Sluice valves,/Non return valve 2.00 NO 4002.00 RS: Four Thousand 8

B,C A1) PN-1 With hand wheel /cap operated (PD type short body)100 Two only

mm No. 164510 Kg / cm2.sluice valves with ISI mark only with slive of EPDM

& disc, shaft & internal parts of SS,-410 & ISI mark onlyA. Sluice valves with

ISI mark only OF 100 MM DIAProviding and supplying ISI mark CI D/F Sluice

Valves , of following class and diameter including all taxes, insurance,

transportationfreight charges, octroi, inspection charges, loading,

56 unloading, conveyance todepartmental stores, stacking etc. completeL,

L & J of CI Pipe (flanged Joint).,Providing and making flanged joints to

flanged C. I. pipes of all classes / specials etc. including cost ofall jointing

materials rubber packing, nut bolts, etc.including labour hydraulic testing

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing & Fixing 15mm One way Bib Tap with Wall Flange. Rate are 6.00 NO 990.61 RS: Nine Hundred 5

inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Ninty and Paise Sixty

57 Detailed Drawings, Specifications and as per the Instruction of Engineer In One only

charge. The Model & Make of Bib Tap Shall be as per the Approved Make

List of GSPHCL.

Provinding and fixing gun metal check or non return full way WHEEL / 2.00 NO 656.86 RS: Six Hundred Fifty 1

HANDLE VALVE 40 mm dia. Rate are inclusive of all matreials, Labour & Six and Paise Eighty Six

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications only

58 and as per the Instruction of Engineer In charge. All material used as per

approved make list by GSPHCL. 40 mm dia.

Provinding and fixing gun metal check or non return full way WHEEL / 2.00 NO 416.47 RS: Four Hundred

HANDLE VALVE 25 mm dia. Rate are inclusive of all matreials, Labour & Sixteen and Paise Forty

Necessary Fittings etc. Complete as per Detailed Drawings, Specifications Seven only

59 and as per the Instruction of Engineer In charge. All material used as per

approved make list by GSPHCL 25 mm dia.

Provinding and fixing to Wall Ceilling and Floor SWR Rain Water pipe as Per 38.00 RMT 323.15 RS: Three Hundred 12

IS-13592 of 90mm Dia Complete with Special flings, Compressor type Twenty Three and Paise

Fittings, Wall clips on wooden patty including making good the ceiling Fifteen only

and floor on terrace rain water pipe shall be 90 mm Dia. SWR horizontal

pipe and vertical pipe and 90mm bend at the end near by Ground level

rate are Inclusive of all Necessary Fittings required. incl.Z patti

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing,supplying and fixing Corrugated DWC HDPE pipe of Class SN8 15.00 RMT 229.00 RS: Two Hundred 3

Structured Wall polyethelene Piping systems (Pipe with online/offline Twenty Nine only

coupler and elastomeric sealing ring) with non-smooth External Annular

Corrugated and Smooth Internal Surfaces (Double Wall) for non-pressure

underground Sewerage & Drainage application as per EN:13476-3

including all local and transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to the etc. complete. (100 mm

ID Dia) Including Lowering, laying and jointing of class SN 8 structured wall

( External Annular Corrugated & Smooth Internal surface) Polyethylene

Piping and fittings with the help of coupler ( on line / off line ) attached

with one end of pipes, sliding over the elastomeric sealing rubber ring

61 placed on the specified valley of the corrugation at the spigot end,

lowering the same into the trench, laying on the lower bedding

(constructed at bottom of trenches) at prescribed gradient,depth &

alignment ,testing the water tightness of the joints, ensuring the continuity

tests of specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including carriage of pipes

& fittings from site stacks to the place of laying etc. as per direction of

Engineer-in-charge.

Providing & fixing PVC SWR MULTY NANHI TRAP IS:14735 for drain -100mm 1.00 NO 1122.26 RS: One Thousand 1

dia. With jali of following nominal dia. of self cleansing design with C.I. One Hundred Twenty Two

Screwed down or Hinged grating including the cost of cutting and and Paise Twenty Six

making good the walls. Providing & Fixing Floor drain jali (Glossy Finish) (on only

N.T.) of 6" X 6"size made of Stainless Steel Grade 304 Floor Drain 3 Piece

62 (Cover/Jali/Grating) With Anti Cockroach Bowl on N.T. Rate are inclusive

of all necessary fittings, material, labour etc.complete as per direction of

Engineer In charge.

Providing and fixing S.W. Gully trap with C.I. grating brick masonry 1.00 NO 1176.94 RS: One Thousand 1

chamber & water-tight C.I. cover with frame of 300mm x 300mm size One Hundred Seventy Six

63 (inside) with standard weight. [I] Square mouth trap (B) 150mm x 100mm and Paise Ninty Four only

size P or R type.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Constructing Brick Masonary Chamber for underground C.I inspection 1.00 NO 3793.18 RS: Three Thousand 3

chamber and bends with brick having crushing stenghth not less then 35 Seven Hundred Ninty

kg/ cm2 in C.M 1:5 R.C.C top slab 1:2:4 mix (1 cement : 2 coarse sand :4 Three and Paise Eighteen

graded stone aggregate 20mm nominal size ) with 8mm dia steel at 15 only

cm. C.C and foundation concrete 1:5:10 inside plaster 15mm thick with a

flotting coat of neat cement walls and bed concrete etc. complete.

64 Inside dimension of chamber 610 mm x450 MMX 450 mm deep for match

proposed pipe line Rate are also inclusive of outside plaster 15mm thick

in C.M 1:3 from top of chamber and all side upto 45cm deep for multi Or

Single purpose pipe line. (WiTH precast RCC Cover 600x 450 mm)

Providing and fixing in position PVC water tank of approved quality and 1500.00 LITER 3.91 RS: Three and Paise 5

size on terrace including making inlet and outlet, over flow and washout Ninty One only

arrangement with G.I. Connection including using necessary material and

labour for connection etc. complete with closed cover as per drawing

and specification. Rate inclusive of Providing & applying two coats of oil

paint on outside of water tank Joint shall be sealted by Pipe sealent.

S.S. Railing Providing and fixing of stainless steel 304 grade pipe railing 15.00 RMT 3143.43 RS: Three Thousand 47

0.90m height. Top round pipe (Baluster) of 2" dia. Vertical balustrade 1.5" x One Hundred Forty Three

1.5" at every max. 0.90m c/c and intermediate 3 nos. runners pipe midrail and Paise Forty Three

of 1" dia and SS base plate of 100 x 8mm. The railing system shall be floor only

66 mounted with anchor fastener and base plate of 100mm size having 8mm

thickness completed as per detailed drawing & as directed by engineer

in charge. Rate are inclusive of all material, labour, taxes & polishing.

Providing & fixing cast iron steps of size 500 x 150 x 22.5 mm & painting 20.00 NO 162.23 RS: One Hundred 3

67 with two coats of anticorrosive paint etc. complete. Sixty Two and Paise

Twenty Three only

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking 200.00 SMT 680.10 RS: Six Hundred 1 36

concrete block 60mm thick with grade of concrete M300 pnumatic Eighty and Paise Ten

compressed / vibrated mechanically and as per approved design only

68 Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and

filling the joint with sand in proper line and level as per guidlines of IRC : SP

63-2018 etc. Complete.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing and fixing Precast Concrete Kerb Stone of Grey Cement Based 154.00 RMT 358.06 RS: Three Hundred 55

Concrete Block size of 30 cm Length, 30 cm Height and 15 cm thick of M- Fifty Eight and Paise Six

250 Grade Concrete as per approved design in required colour (Red, only

69 White, and Yellow) and Including Excavation For Fixing In proper Line And

Level, Filling The Joint C:M 1:3 (1 Cement : 3 Fine Sand) etc. Complete.

MOULDING OF KOTA STONE/GRANITE STAIR TRADE COMPLETE AS PER 20.00 RMT 129.95 RS: One Hundred 2

70 DIRECTION OF ENGINEER IN CHARGE Twenty Nine and Paise

Ninty Five only

PRO. 3 NOS GROOVE 3 MM X 3 MM DEEP IN TOTAL LENGTH OF STAIRCASE 20.00 RMT 82.80 RS: Eighty Two and 1

TREAD OF SIZE 10MM*10MM FINISHED SMOOTH IN PARALLEL LINE , EQUALLY Paise Eighty only

71 SPACED AS PER DIRECTION OF ENGINEER IN-CHARGE IN ALL TYPE OF

FLOORING , ETC. COMPLETE

Painting Numbers or name on Acrylic sheet of Size 180 x 90 cm plate as 2.00 NO 1500.00 RS: One Thousand 3

72 Directed by Engineer in Charge. Five Hundred only

Painting Numbers or name on Acrylic plate as Directed by Engineer in 4.00 NO 125.00 RS: One Hundred

73 Charge. Twenty Five only

Providing a I.S.I. mark 7 lavers three keys brass pad lock of NAVTRAL 5.00 NO. 211.86 RS: Two Hundred 1

74 (godrej) make 65mm dia on completion of porject. Eleven and Paise Eighty

Providing and supplying Medium back chair for Officer's Visitor as per 4.00 NO. 10465.00 RS: Ten Thousand 41

approved brand and model. (Brand and model as per HOF-Model-Marco Four Hundred Sixty Five

75 1002 / Godrej-Model-THRILL MB / Wipro-Model-Define/Featherlite-Model- only

Halix MB / Merrifare-Model-Nez MB or Equivalent)

Providing and supplying Bench (Four Seater) for visitors made of following 12.00 NO. 26818.00 RS: Twenty Six 3 21

backrest and seat made of PU with MS structure with powder coating Thousand Eight Hundred

finished as per approved brand and model. (Brand and model as per Eighteen only

HOF-Model-VIT-3004 PU / Godrej-Model-Luft 3 Seater 4 Arm / Wipro-Model-

Metalica Classico PU/Featherlite-Model-SJ-820A Tandem / Merrifare-

Model-Varion Beam Seating (G01*B3A00J) or Equivalent)

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing and fixing eco-friendly light weight calcium silicate false ceiling 67.00 SMT 1657.57 RS: One Thousand Six 1 11

tiles having Regular edge & 15 mm Thick Densified edges on the Tile Hundred Fifty Seven and

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles Paise Fifty Seven only

shall have, light reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity0.043° w/m

KC.for the best thermal Insulation. The Light weight calcium Silicate tile

shall be of approved texture Fine fissured/Spintone/Cosmos having NRC

value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size

595 X 595 mm to be laid on true horizontal level suspended inter locking

metal grid of hot dipped galvanized steel sections (galvanizing @120

77 grams per sqm including both side) consisting of main 'T' runner suitably

spaced at joints to get required length and size of 24X38mm made from

0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross T' of

size 24X28mm made out of 0.33mm (Minimum) sheet spaced 1200mm

along spaced between main 'T' at 600mm centre to centre to form a grid

of 1200X600mm and secondary cross 'T' of length 600mm and size

24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at

middle of the 1200X600mm panel to form grid of

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

size 600x600mm resting on periphery walls/partitions on a perimeter wall

angle pre-coated steel of size (24X24X3000mm made of 0.40mm thick

(minimum) sheet with the help of rawl plugs at 450mm centre to centre

with 25mm long dry wall screws @ 230mm interval and laying 15mm thick

Densified edges light weight calcium silicate ceiling tiles of approved

texture (Fine Fissured/Cosmos/Spintone) in the grid including,

cutting/making opening for services like diffusers, grills, light fittings, fixtures,

smoke detectors etc., wherever required, Main 'T' runners to be

suspended from ceiling using G.J. slotted cleats of size 25X35X1.6mm fixed

to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm G.l.

adjustable rods with galvanized steel level clips of size 85X30X0.8mm,

spaced at 1200mm centre to centre long main 'T' bottom exposed with

24mm of all T-sections shall be pre-painted with polyester baked paint, for

all heights, as Per specifications, drawings and as directed by engineer-in-

charge. Note:- Only calcium Silicate false ceiling area will be measured

from wall to wall. No deduction shall be made for exposed

frames/opening (cutouts) having area less than 0.30sqm. The calcium

silicate ceiling tiles shall have NRC Value of 0.50 (Minimum) for

Finefissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85%

noncombustible as per B.S. 476 part-IV, 100% humidity resistance and also

having thermal conductivity. 0.043" w/m KC.for the best thermal Insulation.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Contineous Table (Computer) Providing and fixing 38mm thick (plywood 6.00 SMT 18294.04 RS: Eighteen 1 09

board, interior grade) post forming laminated top in approved shade with Thousand Two Hundred

telescopic suspended metal keyboard with mouse tray with 38mm Ninty Four and Paise Four

vertical legs made by plywood with exterior side 1mm and interior side only

0.8mm approved laminate. Appron should be made from 19mm plywood

with laminated finish as per detail. Seperate Drawer unit box (0.65 x 0.41 x

0.43) with wooden bidding patti with lock and telescopic channel of

HAFELE should be made from 19mm plywood with 1mm outside and

0.8mm inside laminate as well as 19mm post forming Outside of shutter

78 with Auto hinges of HAFELE or equivalent and drawer should made from

19mm post forming laminated in approved shade and CPU Trolley should

be supplied of metal powder coated, Footrest (0.75 x 0.37) should be from

teakwood with melamine polish complete. Including all materials and

labour etc. complete as per detail drawing and instruction of engineer-in

charge & Architect.

Provinding and fixing Accoustic laminate wall Paneling Wall paneling on 209.00 SMT 5296.32 RS: Five Thousand 11 06

wall for electrical conducting and net wiring etc. made by 18mm framing Two Hundred Ninty Six

having fixed 50mm thick twiga make glasswool fixed between the framing and Paise Thirty Two

surface. 12mm plywood fixed on top of the framing, 1mm thick approved only

laminate on surfaces openable facility with necessary hardware as per

design and instruction as directed by site in-charge or architect.

Roller Blind Providing and fixing Roller Blind curtain fixed on window level 12.00 SMT 2359.46 RS: Two Thousand 28

on wooden batten and curtain lift with cotton thin rope, design and Three Hundred Fifty Nine

80 colour as per instruction by engineer - in - Charge with necessary and Paise Forty Six only

hardware fitting, material and labour etc complete.

TOTAL CIVIL COST(A) 65 17

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

ELECTRICAL WORK

Providing and erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 44.00 Point 461.00 RS: Four Hundred 20

sq. mm copper PVC insulted FRLS wire with 1.5 sq. mm (green) copper Sixty One only

PVC insulated FRLS wire for earth continuity in FIA approved ISI mark

medium class white colour 20/25 mm dia. embossed rigid PVC pipe with

PVC fitting fixed with adhesive solution erected on/in Brick Wall / slab

along with continuous G.I. fish wire to draw wires and laid in approved

manner zari for PVC pipe and boxes shall be filled with cement mortar

and finishing the surface to match the wall / ceiling complete with

approved make 5/6 Amp. ISI make modular type switch and accessories

81a mounted in 20 G. G.I. company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall / ceiling with

necessary modular lamp holder / modular ceiling rose / HD Connector

(make & model approved by EIC and matching colur with switches

accessories) (Deep Junction box 75mm depth if required) as directed for

concealed wiring. Light point. Cat.-II.

Necessary sheet / tape / polythene / sand must be erected or filled in all

box to prevent mortar going into the box. Length of point wiring must not

increase than 10 mtr. For that necessary switch boards and their locations

must be finalised before execution by agency otherwise payment will not

be done for extra long point. (For future extention, if required, agency has

to erect one higher size metal box and modular plate as per instruction of

EIC. Cost of blank plate shall be paid as per tender item) [This item

include cleaning (inside/outside) of all G.I. switch boards, electric point

box, fan box, MCBDB & box cutting plaster finishing for modular plate

without any gap] [conductor resistance should be as per IS:8130/1984]

For Secondary Light Point, Cat.-II 11.00 Point 166.00 RS: One Hundred 1

81b Sixty Six only

For Fan Point.(with 6A Modular type switch and Two Module hum free 5/6 16.00 Point 648.00 RS: Six Hundred 10

81c step EME step type Electronic fan regulator both having ISI Make ) Cat-II Forty Eight only

For separate Point (with 6 Amp. Switch & 3/5 pin socket both having ISI 11.00 Point 489.00 RS: Four Hundred 5

81d mark) Cat. II Eighty Nine only

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both 22.00 Point 234.00 RS: Two Hundred 5

81e having ISI mark) Cat. II Thirty Four only

Providing and fixing Plug Point wiring with 1.1 KV grade ISI marked 9.00 Point 712.00 RS: Seven Hundred 6

approved make 2 x 2.5 sq.mm copper PVC insulated FRLS wire with 1.5 Twelve only

sq.mm (green) copper PVC insulated FRLS wire for earth continuity in FIA

approved ISI mark white colour medium class 20/25 mm dia.

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution

erected in wall/slab along with continuous G. I. fish wire to draw wires and

laid in approved manner zari for PVC pipe & boxes shall be filled with

cement mortar & finishing the surface to match the wall / ceiling

complete with 16 Amp Modular type Swich and accessories mounted in

82 20 G. GI company fabricated metallic box covered with appropriate front

plate modules erected flushed with wall. (a) 16 Amp. Indicator switch &

No. 6/16 A universal socket white colour suitable for 3/5 pin top duly both

having ISI mark. (Necessary sheet / tape / polythene / sand must be

erected or filled in all box To Prevent Mortor Going In To The Box) Cat.-II.

(Conductor resistance should be as per IS:8130/1984)

Providing & Erecting Plug Point wiring with approved ISI marked 1.1 kv 5.00 Point 842.00 RS: Eight Hundred 4

grade 2 x 4.0 sq.mm copper PVC insulated FRLS wire with 2.5 sq.mm Forty Two only

(green) copper PVC insulated FRLS wire for earth continuity in FIA

approved ISI mark white colour medium class 25 mm dia. embossed

rigid PVC pipe with PVC fitting fixed with adhesive solution erected in wall

/ slab along with continuous G.I. fish wire to draw wires and laid in

approved manner. zari for PVC pipe & boxes shall be filled with cement

mortar & finishing the surface to match the wall / ceiling complete with

approved make 20 Amp. Modular type indicator switch and accessories

83 mounted in 20 SWG GI company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall / ceiling. (a)

Amp Indicator switch & 1 No. 20 A universal socket white colour suitable

for 3 pin top duly both having ISI mark (A.C POINT ONLY) CAT II

(Necessary sheet / tape / polythene / sand must be erected or filled in all

box to Prevent Mortor Going In to The Box)

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing and erecting Medium Class FIA approved and ISI mark white 298.00 Mtr. 24.00 RS: Twenty Four 7

colour (embossed) RIGID PVC PIPES of following size complete erected only

with necessary PVC fittings & Junction boxes fixed with adhesive solution

84a & clamps on / in wall / ceiling along with continuous fish wire to draw

mains with necessary fittings and junction boxes for following dia. For

For 25mm dia. 297.00 Mtr. 33.00 RS: Thirty Three 9

Providing and laying Mains with FRLS PVC Insulated wire ISI marked 1.1 KV 230.00 Mtr. 62.00 RS: Sixty Two 14

grade with FIA approved ISI mark medium class 20/25/32 mm dia. only

embossed rigid PVC pipe with PVC fitting fixed with adhesive solution to

be erected on/in brick wall / slab along with continuous G. I. fish wire to

draw mains laid in approved manner with plastering by cement mortar &

finishing the surface to match the wall / ceiling complete with FRLS PVC

85a insulated wire for earth continuity. (Approved ISI make only) For 2 x

sq.mm. FRLS copper multi stranded conductor mains with 1.5 sq.mm. FRLS

copper multi stranded conductor for earthing as per standard colour

code. [conductor resistance should be as per IS:8130/1984]

2 x 2.5 sq.mm. FRLS copper multi stranded conductor mains with 1.5 160.00 Mtr. 82.00 RS: Eighty Two 13

sq.mm. FRLS copper multi stranded conductor for earthing as per only

85b standard colour code. (Conductor resistance should be as per

2 x 4.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 120.00 Mtr. 111.00 RS: One Hundred 13

sq.mm. FRLS copper multi stranded conductor for earthing as per Eleven only

85c standard colour code. [conductor resistance should be as per

2 x 6.0 sq.mm. FRLS copper multi stranded conductor mains with 2.5 20.00 Mtr. 146.00 RS: One Hundred 2

sq.mm. FRLS copper multi stranded conductor for earthing as per Forty Six only

85d standard colour code. (with 25 mm dia. PVC pipe) (Conductor resistance

should be as per IS:8130/1984 )

4 x10.0 sq.mm. FRLS copper multi stranded conductor mains with 4.0 50.00 Mtr. 421.00 RS: Four Hundred 21

sq.mm. FRLS copper multi stranded conductor for earthing as per Twenty One only

85e standard colour code. [conductor resistance should be as per

Providing & fixing 25 mm. dia PVC insulated G.I corrugated flexible pipe 40.00 Mtr. 37.00 RS: Thirty Seven 1

86 with necessary socket, PVC bushes Saddle. only

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing & erecting Modular type accessories mounted on 20G. 5.00 Each 641.00 RS: Six Hundred 3

company Fabricated Galvanised Metal box covered with appropriate Forty One only

87a front plate modules erected flushed with wall / ceiling with 1 Nos. TV

Socket,1 Nos. of 16 Amp SP Switch & 3 Nos. of 6 Amp 3/5 pin plug. [For TV

Switch board] Cat II

For TV Co-axial Socket Outlet.Cat-II 5.00 Each 139.00 RS: One Hundred

87b Thirty Nine only

For Two pin / RJ-11Telephone Socket (For One Gang) Cat II 5.00 Each 130.00 RS: One Hundred

87c Thirty only

For Blank plate single Cat-II 63.00 Each 16.00 RS: Sixteen only 1

For Modem Jack for Computer Open RJ-45 Cat II 5.00 Each 139.00 RS: One Hundred

87e Thirty Nine only

Providing & erecting Switch board for Computer or electric apparatus 5.00 Each 1023.00 RS: One Thousand 5

consisting of following items in single board erected on Metal board Twenty Three only

with 3 mm thick PC (Polycarbonet) / Acrylic sheet erected as directed.

88 no. 6/16 Amp. universal Socket, 2 nos. 16 Amp. indicator switch, 2 nos.

Amp. Switch & 2 nos. 6 Amp. 5 pin Plug. For Computer power Supply

board. Cat.-II.

Providing & erecting following size of TV Co-axial flexible cable comprising 150.00 Mtr. 39.00 RS: Thirty Nine 5

inner conductor of solid bare copper insulated with Foam PE & Secondary only

conductor made of poly - Aluminium film bonded Al. Braids @ suitable

89 coverage overall sheathed with black PVC insulation. for RG-6

[Polycab/ Finolex / RR Kabel Make]

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing & Erecting 2.0 mtr long Earthing system by making minimum 4.00 Each 7025.00 RS: Seven Thousand 28

bore of 225 mm dia in soft soil. Suitable for doing pipe-in-pipe technology Twenty Five only

earthing.Earthing electric rod must be made from Corrosion free Hot dip

galvanizing pipes having following specification.

(A) Earthing Electrode: outerpipe:- 88 mm minimum O.D., ISI 'B ' Class ISI

mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D., Pipe B Class ISI

mark reputed Brand Terminal Size: 70mm X 100mm length, Terminal

Should be made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal.The hot deep galvanising must

be done after above process.Galvanised thickness must be minimum

micron any where. SS Nut bolt:- 2 no.with washer suitable for 14mm dia.

hole must be provided at terminal. total minimum Weight(approx.) of

earth electrodewith inside conductive material minimum should be 26 kg.

90a (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/meter testing

as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form,

Sulphar content:- <2%

(C) Back fill Compound:- Earthing compound should be capable to retain

moisture for long time Back Filling Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of 400 mm X

400 mm X 400 mm depth and Cover should be heavy duty cast iron with

required size of 300 mm X 300 mm X 4 mm thick.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed laboratory.

4. General test report from OEM regarding specification of earthing.

[Make and model approved by EIC Strictly subject to item specification

only] [OEM has to submit all detail & sample for approved before

[Water must be poured in bore before starting earthing. Earthing value

must be measured with earth tester. Agency has to bring the earth

resistance to at least 02 ohms & voltage between neutral & Earthing upto

02 volt. Agency has to maintain earthing & its value for one year. Earthing

must be done in the presence of A.E. (GSPHCL)]

For above earthing additional charges for boring in hard rock soil (by 4.00 Each 276.00 RS: Two Hundred 1

90b breaker) & filling soft soil in earth pit (certificate for soil have to given by Seventy Six only

DEE / AE along with photographs)

Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte multi 140.00 Mtr. 56.00 RS: Fifty Six only 7

stranded, annealed copper conductor with heat resistant PVC insulated

conforms to IS:694, IEC - 227 erected in existing pipe of following size

(Specifically for control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and bolts if required.

For One wire 6.00 sq. mm

Supplying & erecting M.S./ G.I metal Box having 16 Gauge painted with 199.87 Sq inch 5.94 RS: Five and Paise 1

red oxide be concealed in wall with necessary plastering & finishing Ninty Four only

92 covered with 3mm thick Laminated sheet with grooving as directed of

following depth. 3" Depth

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Supplying and Erecting LED indoor fitting of approximately 4feet long with 14.00 Each 370.00 RS: Three Hundred 5

LED of wattage 0.2W to 0.5W assemble on single MCPCB with housing use Seventy only

as a heat sink shall be made from Aluminum extrusion having enough

strength (sample must be approved by EIC) with polycarbonate diffuser

with following specification: (A) Company mark/name on the fitting.(B)

Rated input voltage and frequency: 220V to 240 VAC ; 50Hz.(C) Rated

input wattage: max. 24w(D) Rated input current : 0.2 Amp

(E) Power Factor : Min. 0.90(F) ATHD : Max. 15%(G) Rated Luminous flux:

(H) CCT: 6500K(I) CRI: Min. 80Ra(J) Driver Efficiency: Min. 80%(K) LED life

span: Min. 50000 Hrs @ L70(L) Over Voltage protection: Withstand up to

440V/AC for 4 Hrs.(M) Surge protection : Min. 2KV

93 (N) IP rating: IP 20(O) IK rating : IK 02(P) Short circuit , Open circuit &

Reverse Polarity Protection must be provided(Q) Fixing clamp design &

strength should be sufficient to hold the fitting erected on wall or

ceiling.(R) 3 core copper wire of appropriate size with earthing connector

(Note:-The manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for

complete Fixture) [Approval will be given strictly subject to item

SITC of Indoor Commercial recess/surface mounted (IP20) Max. 24 w 25.00 Each 751.00 RS: Seven Hundred 18

Cool/warm white Color LED Down lighter office Lighting Luminaire with Fifty One only

external separate driver having BIS certification with fully die cast

aluminium alloy housing without any PVC/Plastic part with corrosion

resistant powder coated finish as a heat sink with Poly Carbonet diffuser

LED complete (only from Philips Lumileds, CREE, BridgLux, Seoul, Nichia &

Osram CRI > 80, CCT 5600K (5400 to 5800K bin). The led's should be

94 mounted onbacklit Metal core based PCB for better heat conduction

and long life of LED. (LM 79 for complete fixture, LM80 for individual LED

Report mustbe submitted) The fixture should have extra protection of

driver like over/under voltage, THD<15%, P.F.>0.90, for 24 w fixture wide

voltage range from 100 to 270 V, 50/60 HZ, 4 KV surge protection.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Fixure must have Min. 2160 Lumens light output. Fixture Efficacy should

be>=90 Lumens/watt. (L70 @ 30,000 Hrs) The Fixture should be able to

easily mount on POP/Grid False cieling. The Luminiare should be tested as

per IP20 standards and following test reports should be submittedat the

time of approval. Model Approved By EIC as per Specification only

(Note:- The manufacturer/authorized Channel partner/dealer of the

manufacturer has to give a 5 yrs. free replcement Guarantee for

complete Fixture)

Providing and erecting Polycarbonate body surface mounting LED Bulk 4.00 Each 780.00 RS: Seven Hundred 3

head type 9 watt Lighting Fitting with electronic driver having THD < 15%, Eighty only

CRI>80, P.F.0.95 And lumen output from luminaire 720 lm, input voltage

95 range 160-270 V AC, 50 Hz cool white (3000 to 6500 k), inbuilt driver having

efficiency >=80lm/w, -20 deg C to + 60 deg C working temperature, AL

frame with Beam Angle 120 deg.

Supplying and erecting 8 W LED lamps with following wattage capacity of 2.00 Each 111.00 RS: One Hundred

220 to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge Eleven only

96 protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing, erecting, testing Ceiling Fan confirming to IS: 374/1979 AMDT 16.00 Each 1929.00 RS: One Thousand 30

No. 1 to 6 Class-I, 50 Hz. Specification of Ceiling Fan must be as per below. Nine Hundred Twenty Nine

(1) Sweep: 1200 mm, (2) Operating Voltage: 180 to 230 V, (3) Power only

Factor: > 0.9, (4) Power Consumption: maximum 53W, (5) RPM: minimum

330, (6) Service value:min 4.3 m3/min. (7) Class of insulation: 'B', (8) No. of

heavy duty premium quality Ball bearing: Two, (9) Total Body: Top &

Bottom should be alluminium, (10) Blade: Aluminium approx 1.1 mm thick,

(11) Colour: White high grade powder coating, (12) Canopy: Two Nos.

Heavy duty, (13) Condenser: min 1.5 MFD (15% Tolerance )as per is 1709-

1984, Aluminium body premium quality, Branded make,(14) Down road:

97 up to 1.0 mtr as per site requirment, (15) Required fixing accessories, (16)

core 0.75 sq.mm ISI wire as per site requirment, (17) No vibration and noise

due to mechanical parts. (Agency has to erect safey wire with ceiling fan

and checked with EIC) (OEM has to approved model as per tender

specification and tested at ERDA) (Necessary test reports should be

submitted strictly at the time of approval. Sample approved by EIC

subject to above specification only)

Supplying & Erecting Fan Hook Of 10 mm M.S Round bar bounded to the 16.00 Each 125.00 RS: One Hundred 2

RCC bars up to 50 mm Length each side & piereced through 18 Gauge Twenty Five only

98 G.I Box having 125 mm dia depth of 75 mm complete erected concealed

in ceiling with necessary modular plate / sheet

Supplying and erecting 19 / 20 mm. nominal bore "B" Class G.I Pipe /M.S. 10.00 Rn. Mtr. 107.00 RS: One Hundred 1

Pipe down rod erected duly painted for fan complete with necessary Seven only

24/0.2 flat 3 core flexible cable with earthing.The Down rod

thickness,hole,locking arrangement,construction,power coating,colour

shed should be same as original down rod brought with ceiling fan.For

99 that agency has to give original down road sample to fabricator and

one sample down rod should be approved with EIC .After approval given

by EIC agency can use the down rod as per approved sample.If without

approval down rod will be erect on site,agency has to replace them with

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing ad erecting approved make Three phase Double Door 1.00 Each 11343.00 RS: Eleven Thousand 11

Horizontal / Vertical type (as per site requirement and EIC instruction) Three Hundred Forty

outgoing per phase outgoing type (PPI) metal clad D.B. as per relevant Three only

Indian standards amended up to date. Supplying and fixing following way

Three phase MCB distribution board with company wire links for internal

connections having colour code and with suitable lugs and company

fabricated with sheet box with powder coated inside and outside after

apply seven tank chemical process of MCBDB Door, Back Side & Body

must be made of 1.2 mm thick CRCA sheet cover complete with suitable

integral single piece construction, tinned copper busbar and link with all

necessary interconnection and with necessary size GI frame (if required

for surface type) for mounting MCBDB. Manufacturer must be provided (1)

IP 43 and as per IS:8623-1 & 3, IEC 61439-1 & 3 having D type PU gasket. (2)

Seven tank Powder coating Certificate (3) Tinned Copper/Brass make

neutral & Earthing link with isolation & Protecting Cover for 440 Volts on

surface / recess complete with loose wire box, terminal connectors for all

and outgoing circuits, with suitable size FRLS PVC 10mm2 insulated copper

conductor with Pin type lug up to terminal blocks and internal

connection, tinned copper bus bar, 4 nos. tinned copper neutral link,

nos. tinned copper earth bar, din bar-4 nos., detachable gland plate,

interconnections, including earthing etc. Three phase incoming and

single phase outgoing. Total quantity of wire link: 13 Nos.

For Three phase 8 Way Double Door PPI MCBDB I/C:- 25Amp FP MCB

10KA, C-25A DP ELCB, 30a, 10KA - 03nos & O/G:- C-curve 6-32 Amp SP

MCB :- 18Nos. (The DBs should be used of same company of MCB / ELCB

to be used) (MCBDB must be erected in line & level with spirit level and

finish the external edge with box cutting plaster) (Same colour

MCB(SP/DP) should be used as same as MCBDB) [Including Necessary

numbering / marking on box done with red colour radium sticker as per

site requirement and instructions given by EIC on site. Font / number size

given by EIC on site as per requirement]

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing ad erecting approved make single phase Double Door metal 1.00 Each 3294.40 RS: Three Thousand 3

clad D.B. as per relevant indian standards ammended upto date. Two Hundred Ninty Four

Supplying and fixing following way single phase MCB distrubution board and Paise Forty only

of company fabricated with sheet box with powder coated inside and

outside after apply seven tank chemical process of 1.2mm thick CRCA

sheet ( Door, Back side & body )cover complete with suitable integral

single piece construction tinned copper busbar and link with all necessary

interconnection and with necessary size MS frame for mounting MCBDB.

Manufacturer must be provided (1) IP 43 and as per IS:8623-1 & 3, IEC

61439-1 & 3 having D type PU gasket. (2) Seven tank Powder coating

Certificate (3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 240 Volts on surface / recess complete

with loose wire box, terminal connectors for all incoming and outgoing

101 circuits, with suitable size FRLS PVC insulated copper conductor up to

terminal blocks and internal connection, tinned coppper bus bar, 1 no.

tinned copper neutral link, tinned copper earth bar, din bar, detachable

gland plate, interconnections, powder painted including earthing etc.

Single phase incoming and horizontal single phase outgoing. For 6 Way

SPN MCBDB Including 16 Amp. 30 mA double pole RCBO (RCCB+MCB)

10KA , and S.P. MCB of rating 6 to 32 Amp- 4 nos.. with NL suitable to

operate on 240 Volt A.C. power.

(The DBs should be used of same company of MCB / ELCB to be used)

(MCBDB must be erected in line & level with spirit level and finish the

external edge with box cutting plaster) (Same colour MCB(SP/DP) should

be used as same as MCBDB) [Including Necessary numbering / marking

on box done with red colour radium sticker as per site requirement and

instructions given by EIC on site. Font / number size given by EIC on site as

per requirement]

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

SITC of Inverter based approved make split air-conditioning unit 4.00 Each 51155.00 RS: Fifty One Thousand 2 04

consisting of copper condensing unit with variable speed fan motor, One Hundred Fifty Five

inverter type hermetically sealed rotary compressor with accessories etc. only

duly connected separately erected evaporating unit and blower motor

with its accessories by means of extra supplied proper insulated copper

tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas

102 charging and 15A plug top & Remote Control & MS Stand) with necessary

(1)For ISEER Range (KWH/KWH)(3.1 to 3.99) for 1.7 to 2 ton capacity. (

Make:- OGENERAL, MITSUBISHI,BLUESTAR, DAIKIN )( Model approved by

Carry out RCC Core cutting- up to 100 mm dia./200mm thick 8.00 Job 1188.00 RS: One Thousand 9

103 Wall/beam/slab with providing PVC pipe of 3 mm thick inside and One Hundred Eighty Eight

necessary finishing on both ends of wall . only

Rigid UPVC drain pipe of 10 Kg/cm2. rating with 9 mm thick.nitrile rubber 55.00 Rmt 87.00 RS: Eighty Seven 4

insulation. For 25 MM DIA. only

Supplying & fixing 50mm thick TF quality expanded polystyrene for 25.00 Sq mtr 409.00 RS: Four Hundred 10

105 underdeck insulation on slab/wall /shaft exposed to sun/atmosphere as Nine only

per specifications.

SITC of Air condationer copper tubing with minimum 19mm thick class O 50.00 Rmt. 956.00 RS: Nine Hundred 47

nitrile rubber insulation for entire piping system. Exposed refrigerant piping Fifty Six only

should be additionally insulated with factory laminatede 200GSM glass

cloth for UV and mechnical protection and manufacturer recommended

adhesive ( Solvent-free) sealant appiled at all joints Uv- Protection layer.

additional layer of UV paint over GC for all exposed to atmosphere piping

for weather protection of pipes & insulation and prevention of rain water

106 ingress. For Single phase/ Three Phase Split A.C. Machine/ Cassate A.C

Machine insulated pair of soft, copper tubing including power and

control cable, 20/25/32 mm Dia. Rigid (ISI marked) UPVC drain pipe. Duly

Insulated with 6 mm elastomeric nitrite rubber up for Split AC machine up

to 2 TR capacity

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Executing comprehensive (All-in-All) service & maintenance with spare 4.00 Each 5598.00 RS: Five Thousand 22

parts as per terms & condition of tender for 2 Dry Service & 2 water or Five Hundred Ninty Eight

Chemical service with AC agency for defect liability period and copy of only

this contract will be submitted before final bill. Agency has to quote rate

accordingly. Agency has to also provide the fitness certificate from system

agency and submit to G.S.P.H.C.L. Agency has to Compulsory submit FDR

of approved bank as per clause 2.0, section 3 of FDR of Rs.22,392.00+ GST

or quoted rate (as per tender premium % above) whichever is higher to

G.S.P.H.C.L. for minimum maturity period of five years in favour of

G.S.P.H.C.L., Which will be released after successful completion of A.M.C.

& at the completion of defect liability period. In any case without

submitting FDR final bill submission will not be done.AC agency has to

maintain written record of service & maintenance during defect liability

daily period duly sign by police dept. and submitted regularly to

G.S.P.H.C.L. Agency has to give minimum three services and

demonstration per year and testing and training of entire Air Conditioning

system. during defect liability period and obtain necessary certificate

from police department and submitted to G.S.P.H.C.L. Agency has to do

maintenance as per terms & condition alternative in tender. (Agency will

have to submit stability and performance certificate regarding AC system

from authorized dealer/OEM of AC at the time of final SD release). For

delay in rectifing the fault penalty will be deducted from agency S.D. For

2.0 Ton Split AC machine.

Supplying and laying UPVC cable trunking system comprising 20.00 Mtr. 275.00 RS: Two Hundred 5

unplasticised polyvinyl, chloride rigid material with ignition free & flame Seventy Five only

proof confirming BS with necessary end caps Internal and external bend,

108a flat bends, coupler, tee etc. All necessary accessories and measuring of

following sizes.For 75 mm x 50 mm trunking (MK / Legrand/OBO Make

For 100 mm x 50 mm trunking (MK / Legrand/OBO Make Only) 20.00 Mtr. 424.00 RS: Four Hundred 8

108b Twenty Four only

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing, erecting, fabricating the M.S. structure as per requirement of 20.00 kg 74.92 RS: Seventy Four 1

site as per structure design Including proper size approved by EIC of M.S. and Paise Ninty Two only

angles, flats, bars, square pipe, channels, sections (Tata,Zindal,Asian,Jsi

Make) complete with cutting, welding, grinding and finishing duly painted

with Asian/Nerolac make premium quality oil paint and true care red

oxide metal primer,asian paint make with erection on site as per direction

109 of engineer in charge with necessary grouting cementing, plastering and

finishing complete. All hole opening of square pipe end must be closed

with M.S plate welding. Payment will be done on KG as per Actual weight.

Supplying & erecting 12 mm thick backelite sheet of approved make and 1.00 Sq. Mtr. 2289.00 RS: Two Thousand 2

grade on 25 x 25 x 3 mm red oxide painted angle iron frame suitable for Two Hundred Eighty Nine

fixing ICDP SWITCH and energy meter (contractor shall make approved only

110 drawing of Bakelite sheet To arrange required No. of Energy meter & ICDP

switch -busbar etc. as per Actual space available in electrical room at

Providing and erecting Steel cover as per drawing using 16 SWG 6.00 Sq. Mtr. 2535.00 RS: Two Thousand 15

M.S.sheet of following depth, to house the switch gear etc. complete with Five Hundred Thirty Five

locking arrangement and lock with duplicate keys per cupboard and only

111 door handles erected with necessary support and painting. [One coat

red oxide and two coat enamel paint] Without angle iron frame For

SITC of specified make X color for Cat.-6 Data and Y color for Cat.-6 voice 160.00 Mtr. 47.00 RS: Forty Seven 7

cable to be done in prelaid PVC pipe / raceway, but without the cost of only

112 raceway or pipe (the wire is to be drawn from MFD/ JB to outlet point) For

CAT - 6 (For Computer Cabling and For Voice Cabeling) (Molex, Avaya,

D-Link, Legrand make Only)

SITC of Layer 2 Switch, Shall have 8-port 1000 BASE-T (RJ45) PoE+ with 1.00 Each 18218.00 RS: Eighteen 18

additional 2-port 1GBASE-X (SFP+), 65W PoE Budget with single power Thousand Two Hundred

supply unit, shall have minimum 52Gbps non-blocking fabric across 10 Eighteen only

ports, Switch must have advance feature like VLAN Tagging, Voice VLAN,

LAGs, LACP, IGMP Snooping, Multicast VLAN Registration, ACLs, LLDP,

113 SNMP, QOS. Switch’s Operating System should be tested under Common

Safety Criteria Certification & as per attached details specification.

(Make:- Netgear/Cisco Enterprise/HP Enterprise )

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Supply, Installation, testing and commissioning of 24 port Cat 6 19" Toolless 1.00 Each 4357.00 RS: Four Thousand 4

Patch Panel ( fully loaded) enable all possible combinations of the various Three Hundred Fifty Seven

types of cable mounted on the same panel by using various toolless only

connector blocks/modules. Have a metal structure enabling them to be

durably fixed to the uprights of the 19” chassis and assuring automatic

grounding between toolless RJ-45 connectors, the panel, and the 19”

uprights of the enclosure. Include rear cable support with plastic cable

guides to hold cable without need for cable ties. Include quick mounting

system to mount the panel into the 19” rails without use of cage-nuts.

114 These may be used to secure the connections of wifi access points, IP

cameras, servers, or other critical devices. Front Removal IO's option for

maintenance and trouble shooting with 6 Different Colours Labels for

Labelling & Identification of Individual Ports. & as per attached details

specification. (CAT 6 ) ( Make:- Molex,Commscope Systemax/

Legrand/Panduit)

SITC of company fabricated Patch cords shall conform to Cat- 6 & 5.00 Each 155.00 RS: One Hundred

conductor shall be stranded for better flexibility Shall support network line Fifty Five only

115 speeds up to 1 Gbps Shall have RJ-45 jacks. For 1 Mtr.[Make and model

approved by EIC as per specification]

SITC of company fabricated Patch cords shall conform to Cat- 6 & 5.00 Each 199.00 RS: One Hundred

conductor shall be stranded for better flexibility Shall support network line Ninty Nine only

116 speeds up to 1 Gbps Shall have RJ-45 jacks. For 2 Mtr. [Make and model

approved by EIC as per specification]

Supply and installation of 9U steel rack for installing 4 nos. Ethernate 1.00 Each 11441.00 RS: Eleven Thousand 11

switches/Hubs. The Rack should be fully enclosed steel housing fabricated Four Hundred Forty One

with 14 SWG sheet and powder coated with glass doors and having wire only

management systems. The rate includes the Exhaust Fan, 2 nos. 4 socket

and 1 switch power strip and all the wiring in the rack. (Rittal, Valrack,

APC, Legrand Make and model approved by EIC as per specification)

Providing & erecting main Distribution (MDF) indoor type, back mounted 1.00 Each 985.00 RS: Nine Hundred

118 frame as per DoT standard approved with krone strips For Suitable for 10 Eighty Five only

pair (Krone type)

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Supplying and erecting Fabricating terminal box for street light pole made 14.00 Each 702.00 RS: Seven Hundred 9

from 16 SWG M.S. sheet having following size complete with fixing Two only

arrangement for terminal board, with necessary hole for wire entry and

exit from the box. The box shall be provided with cover and hinges on one

side and bolting at other end The box shall be fixed by clamps fabricated

from 25mm x 6mm flat.The box shall be painted with one coat of red

119 oxide and two coats of paint having following box size 330 mm x 260 mm

x 140 mm (depth). Providing and fixing Terminal board of size 5.0 x 127 x

152.4 mm.bakelite sheet with 15 Amp. kitkat pattern porcelain fuse unit

with suitable brass studs with nuts, washers and clamps of size 25 mm x

mm suitable for pole painted with one coat of red lead paint.

Providing and Fixing of wall and terrace bracket consisting of ISI mark "B" 14.00 Each 487.00 RS: Four Hundred 6

class G.I. Pipe 4.2 cm outside diameter and length suitable for building Eighty Seven only

face for fixing the brackets and having spread of Upto 0.70 mtr. length

with suitable degree angle as per site situation suggested by EIC. vertical

plane and suitable welded stiffner reducer and nipple with check nut

complete painted with one coat of red oxide and two coats of

alluminium paint with . complete with 150*150*2mm thick G.I plate with

4no heavy duty galvanized jasti khila of required size or Single arm

120 bracket (pipe in pipe type) suitable for terrace as per design given by EIC

Considering parfait, height ,width and total height of building and type of

led fitting . For single arm bracket. (Jindal / Asian / Tata / Surya Prakash

make Only) (Fabricators:- Impression / Fab / Bajaj / Impression equipment

Only) (Test certificate to be submitted) ( For Wall/Terrace Street Light

Fitting-Bracket )

Supplying & erecting approved make SMC press moulded composite 2.00 Each 890.00 RS: Eight Hundred 1

FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite Ninty only

connector strip 5way(3P+N+E), DIN rail for mounting mob & hinged doors

as per requirement having locking arrangements with mounting clamp

with nuts, bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box. (A) 300mm x 200mm x 100mm

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

SITC of Outdoor aesthetically designed LED Street Light Luminaire with 14.00 Each 3512.00 RS: Three Thousand 49

total consumption of Max. 45 W with single piece die cast aluminium Five Hundred Twelve

housing, high power LED shall be mounted on high quality metal core PCB only

with extremely precison designed heat sink complete with IP66 protection

Class with polycarbonate / thoughened glass cover the fixture should be

suitable for pole/bracket mounting. The fixture to comply both LM79 and

LM 80 guidelines with LED module min. 130 lumen/watt with toughen Glass

L70 at 50,000 hrs, provided with high quality polycarbonate lenses for

better light distribution. The watt capacity of Each LED must be >=4W in

street light fitting. The Fixture Should be able to be Pole Mounted and also

bracket mounted, provided with high quality driver for protection against

high and low Voltage cut Off, opertional for high amibient and high

122 humid envirnoments, THD of driver should be less than 10% and P.F > 0.95.

Also the Fixture should meet the following technical criterias Oprating

range Voltage 160 to 270 V, system efficiency >= 110 lm/w, and total

lumens not less then 4950, CCT > 5000K, CRI > 65, beam angle 120 deg,

surge immunity level at least 4 KV integral and 10 KV non integral (Note:-

The manufacturer / authorized Channel partner of the manufacturer has

to submit 5yrs free replcement Guarantee for complete Fixture)

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 150.00 Mtr. 46.00 RS: Forty Six 6

123 kv grade ISI marked copper wires of following size to be erected as only

directed. For 1.50 Sq.mm 3 core round PVC sheathed

Providing & Erecting Universal Astro 5 KVA intelligent streetlight control 1.00 Each 12895.00 RS: Twelve Thousand 12

system insu with weather proof box for outdoor application. (As per Eight Hundred Ninty Five

124 specification attached separately) (Make and model approved by EIC) only

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Aluminium 220.00 Mtr. 182.00 RS: One Hundred 40

conductor cable for 1100 volt to be laid 90 cms. Under ground or to be Eighty Two only

125 laid on wall with suitable G.I. heavy guage 1.0mm thick cable clamp or in

existing DWC pipe underground or road crossing or floor. For 3 1/2 core

25 Sq. mm ( 16 Sq. mm 1/2 core)

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Aluminium 306.00 Mtr. 152.00 RS: One Hundred 46

conductor cable for 1100 volt to be laid 90 cms. Under ground or to be Fifty Two only

126 laid on wall with 1.00 m.m thick G.I. heavy guage cable clamp or in

existing DWC pipe underground or road crossing or floor .For 4 core

Providing & erecting XLPE (IS : 7098) (I)-88 ISI marked armoured Copper 214.00 Mtr. 361.00 RS: Three Hundred 77

cable for 1100 volt to be laid 90 cms. Under ground or to be laid on wall Sixty One only

127 with suitable G.I. heavy guage 1.6mm thick cable clamp or in existing

DWC pipe underground or road crossing or floor. For 4 core x 4 sq.mm.

Providing & fixing Solderless crimping type Aluminium lugs conforming to IS 50.00 Each 15.00 RS: Fifteen only

suitable for cable of following size evenly crimped with high pressure tool

128 & connected to switchgear terminals with brass/cadmium plated nut bolts

in an approved manner. For 16/25 Sq.mm.

Providing & fixing Solderless crimping type Copper lugs conforming to IS 128.00 Each 8.00 RS: Eight only 1

suitable for cable of following size evenly crimped with high pressure tool

129 & connected to switchgear terminals with brass/cadmium plated nut bolts

in an approved manner. For 1.5/2.5 to 6 Sq.mm

Providing & fixing double compressed heavy duty flange type brass cable 32.00 Each 43.00 RS: Forty Three 1

gland with rubber ring for P V C insulated armoured cable complete with only

130a outgoing tails, insulating tape etc. For following size cables.For 2 to 4 core

x 4.0 Sq. mm (Sigma, MCI, Comet Make Only)

For 2 to 4 core x 16.0 Sq. mm (Sigma, MCI, Comet Make Only) 8.00 Each 57.00 RS: Fifty Seven

For 3*1/2 core or 4 core x 25.0 Sq. mm (Sigma, MCI, Comet Make Only) 2.00 Each 66.00 RS: Sixty Six

Providing & laying HDPE Double walled corrugated pipes (DWC) 540.00 Mtr. 117.00 RS: One Hundred 63

(conforming to IS: 16205 (part 24) 2018)) with minimum load required of Seventeen only

450N capacity with anti rodent and ultra violet material properties with

necessary connecting accessories of same material at required depth to

131a be laid 90 cms. under ground for laying of cable below ground / road

surface for enclosing cable and back filling the same to make ground as

per original. For Outer dia. 50 mm and Inner dia. 38 mm. (Test Certificate

to be Submitted)

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

For Outer dia. 90 mm and Inner dia. 75 mm. ) (Test Certificate to be 200.00 Mtr. 150.00 RS: One Hundred 30

131b Submitted) Fifty only

Providing and erecting open well type horizontal submersible mono block 4.00 Each 15552.00 RS: Fifteen Thousand 62

pump set with cast iron body having following specification For 3 phase Five Hundred Fifty Two

open well horizontal mono block pump set suitable for ...270..LPM only

discharge at required head as per plumbing length and vertical &

Horizontal head.Agency has to submit the details calculation of head to

GSPHCL and get approval of make and model of pump having tender

specification with TDS & GA drawing. Suitable for 65/75 mm dia delivery

pipe with 10 mtr. necessary Size 3 Core Flat copper flexible cable. (Body:

Cast iron / Winding : Copper / stator : Copper / rotor : Copper / shaft : SS

304 material test certificate from manufacture shall be submitted).The

132 model of the pump with respect to head and discharge will be approved

by EIC. Pump should have following specifications:(1) Minimum 10 mtr. Cu.

flat cable of suitable size must be provided with pump.(2) Pump shall be

installed as per manufacturer foundation/erection drawing or as per IS

specification. (Body full C.I., stator winding- copper, rotor- copper, shaft-

SS 304, motor-Energy efficiency)

Lowering of existing submercible motor pump set complete with required 4.00 Each 848.00 RS: Eight Hundred 3

No. and size of pipes by means of proper chain pulley block and pipe Forty Eight only

133 wrenches. Job includes stacking of pipes cronologically after the

checking of threads. For open well horizontal submercible pump set for

sump well. (i) 1.0 HP to 5.0 HP.

Supplying and erecting approved make 3 HP DOL type motor control 2.00 Each 47062.00 RS: Forty Seven 94

cubical panel made from 16 G. CRCA sheet duly epoxy powder painted Thousand Sixty Two

inside and outside with hinged doors and locking arrangement Floor only

Mounting On 300 mm Height with MS Stand Angle & CC Foundation. Size

35 mm (H) x 35 mm (W) x 05 mm (D). The detail specification & quantity of

134 material used are as under.

Panel must be with minilec relay for auotmatic change over for pump 1 &

2 logically without using manually change over switch (Minimum Panel

Size: 1.10 meter (H) x 1.10 meter (W) x 0.25 meter (D).

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

INCOMMER SECTION: (1) MCCB-30 KA-FP (Ics = 100% Icu), Rating: 63 Amp.,

Make: L&T, Qty: 01 No. (2) Digital Ammeter (SR-65), Rating: 0-60 Amp.,

Make: Meco, Qty: 01 No. (3) Ammeter Selector Switch, Rating: 6 Amp.,

Rotary, Make: Salzer, Qty: 01 No. (4) Digital Voltmeter (SR-65), Rating: 0-500

V, Make: Meco, Qty: 01 No. (5) Volt Selector Switch, Rating: 6 Amp.,

Rotary, Make: Salzer, Qty: 01 No. (6) C.T.- Current Transformer, Rating: 60/5

Amp., Make: Virat, Qty: 03 Nos. (7) Indicating Lamps (R,Y,B), Rating:

mm LED, Make: Airon, Qty:03 Nos. (8) SP MCB , Rating: 20 Amp., Make: L&T

, Qty: 03 Nos. (9) Control Wiring, Rating: 1.0 Sq.mm, Make: Any ISI, Qty: Lot

(10) Copper Busbar, Rating: 63A/100 Amp., Qty: Lot (11) Numeric logical

relay, Qty: 1 No.

Outgoing Feeder (3 HP DOL Feeder): Qty: 02 Nos. (1) MCB-FP-10 KA,

Rating: 20 Amp., Make: L&T, Qty: 02 Nos. (2) Power Contactor (415 V)

Main, Rating: 12 Amp., Make: L&T, Qty: 02 Nos. (3) Over Load Relay,

Rating: 6-10 Amp., Make: L&T, Qty: 02 Nos. (4) Digital Ameter (SR-65),

Rating: 0-20 Amp., Make: Meco, Qty: 02 Nos., (5) Digital Voltmeter (SR-65),

Rating: 0-500 V, Make: Meco, Qty: 02 Nos. (6) Indicating Lamps

(Start,Run,Trip), Rating: 22.5 mm LED, Make: Airon, Qty: 04 Nos. (7) Push

Button (Start,Stop), Rating: 22.5 mm, Make: Airon, Qty: 02 Nos. (8) SPP,

Rating: 415 V, Make: Space, Qty: 02 Nos. (9) Terminal, Rating: As per Amp.,

Make: Airon, Qty: 04 Nos. (10) Control Wiring, Rating: 1.0 Sq.mm., Make:

Any ISI, Qty: Lot (11) Power Wiring, Rating: As Per Amp., Make: Any ISI, Qty:

Outgoing Feeder (6 Amp. - 01 No.) For Capacitor (1) MCB-FP-10 KA,

Rating: 6 Amp., Make: L&T, Qty: 01 No. (2) Capacitor- MPP Type, Rating:

KVAr, Make: Concap, Qty: 01 No., (3) Power wiring, Rating: As Per Amp.,

Make: Any ISI, Qty:Lot

Outgoing Feeder (32 Amp. - 01 No.) For Lighting (1) MCB-FP-10 KA, Rating:

32 Amp., Make: L&T, Qty: 01 No. (2) Power wiring, Rating: As Per Amp. (3)

Earthing Strip: 25 x 3; G.I. Strip, Qty: 01 No. (4) MCB-DP-10KA , Rating: 20A,

Make: L&T, Qty.:01 Nos.

Providing & erecting ISI make medium duty (B class) galvanized MS pipe 40.00 Mtr. 260.00 RS: Two Hundred 10

135 with coupling, bend, union, reducer, tee, MS flange etc. with plumbing Sixty only

charges. For 50 mm dia

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Supplying and erecting C.I. Swing check type non-return (reflux) valve ISI 6.00 Each 1010.00 RS: One Thousand Ten 6

marked with packing, flange, nuts and bolts etc.suitable for following pipe only

136 size. For 50 mm dia. (SANT,KIRLOSKAR,LEADER,ZOLOTO)

Providing Water proof straight Joint in PVC insulated flat flexible copper 4.00 Each 188.00 RS: One Hundred

137 cable by using insulating material, water proofing material, & making the Eighty Eight only

joint complete. For Up to 10Sq. mm

Supplying Water tight M.S.Box of size 20 x 15 x 15 cms. to erect suitable 4.00 Each 232.00 RS: Two Hundred

kitkat fuse / MCB to be . erected on polished wooden board inside the Thirty Two only

box with hinged/sliding door with rubber rings and erected on pole with

138 suitable pole clamp, all duly painted with one coat of red oxide and two

coats of paints. (Cost of Fuse / MCB shall be taken extra) [Provision for

motors cable joints near sump]

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat 40.00 Mtr. 103.00 RS: One Hundred 4

139 flexible Submersible copper cable approved make of following Size. For Three only

3 Core x 2.5 Sq. mm.

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing and fixing of ABC Type Store Pressure Fire Extinguisher Having 5.00 Each 1991.00 RS: One Thousand 9

capacity 6 kg Filled with Mono Ammonium Phosphate Powder 50% Nine Hundred Ninty One

confirms to IS 4308, Stored Pressure Type, UGTS Pressure Gauge, Can only

Height 530 mm, Diameter 150 ± 10mm, Discharge Time 24 Sec,

Controllable discharge mechanism, Jet Range 5 Meters, Average

Discharge is 92%, applicable on Class A,B & C and electrically started Fire,

Fire Rating 4A:144B, Can Construction : Deep drawn & CO2 Mig welded,

EPDM(Ethylene Propylene Diene Monomer) Rubber Hose with both end

Aluminum clamped, Internal Coating - Epoxy Powder coating, External

Coating - Pure Polyester Powder coating (UV Resistant),Brass forged CE

Marked valves with NRV & Auto Safety Release with safety Pin is of SS

material, Made up from 1.6mm thick sheet, Extinguishers confirmed to IS

15683:2018 and ISI marked. Referance Weight:-Gross Weight 8.9 Kg,

140 Empty Weight 2.9 Kg, 1. Necessary certificate & and guarantee must be

attached, 2. OEM has to provide wall mounting heavy duty

bracket/clamp, screw, hardware for installation. 3.Following printed

marking Manufacturing Date and Expiry Date must be mention on

Extinguisher 4. Refilling period must be of 3 Years. Following Printed

marking on equipment must be required:- Model No, Capacity, Gross

Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month, Refilling Due.

[with necessary numbering / marking with oil paint by painter as

instructions given by G.S.P.H.C.L engineer] (Make: KANEX,

MINIMAX,CEASEFIRE)

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing and fixing of CO2 type High Pressure Portable 4.5 kg Fire 5.00 Each 6526.00 RS: Six Thousand Five 32

Extinguisher, filled with Co2 Gas as per IS 15222, Control discharge Hundred Twenty Six

mechanism fitted with 1 Meter Wire Braided Hose & Electrical non- only

conductor Polyethylene Flat Horn with Diffuser Nozzle for dispersed

discharge of CO2, Discharge Time 12 Sec, Average Discharge is 95%,

Applicable on Class B, C and electrically started Fire, Fire Rating 55B,

Internal coating is not applicable & External coating is of enamel spray

painting, Powder Coated Handle, Valve Confirm to IS 3224 ISI Marked,

CO2 Cylinder construction: hot spinning by seamless pipes & bearing ISI

mark, Body confirms to IS 7285 and PESO ( Petroleum and Explosives

Safety Organization) APPROVED, Minimum Wall Thickness 4 to 4.2 mm,

Extinguishers confirmed to IS 15683:2018 and ISI marked. Referance

Weight:-Gross Weight 16.4, empty weight 11.9 Kg, 1. Necessary

certificate & and guarantee must be attached, 2. OEM has to provide

wall mounting heavy duty bracket/clamp, screw, hardware for

installation. 3.Following printed marking Manufacturing Date and Expiry

Date must be mention on Extinguisher 4. Refilling period must be of

Years. Following Printed marking on equipment must be required:- Model

No, Capacity, Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg

Month, Refilling Due. [with necessary numbering / marking with oil paint

by painter as instructions given by G.S.P.H.C.L engineer] (Make: KANEX,

MINIMAX,CEASEFIRE)

ITEM Description QUANTITY Unit RATE IN RATE IN WORD Amount

Providing and fixing of Automatic type 5 kg Fire Extinguishers Mono 2.00 Each 5240.00 RS: Five Thousand 10

Ammonium Phosphate powder 50% Confirms to IS 4308, Applicable fire Two Hundred Forty

classes A,B & C, UGTS Pressure Gauge, Can Height 370mm, Diameter 230 only

± 10mm, Made up from 2 mm thick sheet, Body Construction Deep

Drawn with MIG Welding technology, Brass forged sprinkler valves with

Nozzle is specially designed to give more than 99% discharge. Together

with orifice characteristic to cover adequately fire risks with scattering

cone of 40 to 45° Angle. External Pure polyester (UV resistant) and Internal

Epoxy polyester powder coated, Heat Sensitive Glass bulb of 68 °C. Area

covered will be 2-2.5 m2 and volume of coverage is 7 m3. Referance

Weight:-Empty Weight 2.64 kg, Full weight 7.64 kg, 1. Necessary certificate

& and guarantee must be attached, 2. OEM has to provide heavy duty

142 wall/ Ceiling mounting Bracket/ clamp, screw, hardware for installation.

3.Following printed marking Manufacturing Date and Expiry Date must be

mention on Extinguisher 4. Refilling period must be of 3 Years. Following

Printed marking on equipment must be required:- Model No, Capacity,

Gross Weight, Content, Fire Rating, Batch No, Serial no, Mfg Month,

Refilling Due. [with necessary numbering / marking with oil paint by

painter as instructions given by G.S.P.H.C.L engineer] (Make: KANEX,

MINIMAX, CEASEFIRE)

TOTAL ELECTRICAL COST(B) 12 27

TOTAL COST(A+B) 77 45

Signature of Contractor DY.Executive Engineer Executive Engineer

Ahmedabad. Ahmedabad.