REPAIRS TO FOOT PATH,INTERLOCKING TILES,HARDSTANDING,FENCING

Amount

Taking up or down including refixing machine pressed precast cement concrete interlocking paver blocks any shape & size and refixing the same over new sand layer over 50 mm thick and over compacted sand cushioning and making good complete all as specified and directed.(Note: Rate of Sand cushioning deemed to be included in this item )

M&L for 60mm thick machine pressed with grey cement and pigment precast cement concrete interlocking paver blocks any shape & size confirming to IS-15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed.

M&L sand filling under floors or in foundations including watering and consolidation

Demolition of cement concrete (un-reinforced)of any description and in any portion not otherwise specifically provided for and including removal of the debris to low lying areas complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description(reinforcement cut as required to facilitate demolition) and in any portion not otherwise specifically provided for and including removal of the debris to low lying areas complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub floors, sub bases, floors and pavings etc finished surfaces even and fair without using extra cement complete all as specified and directed.

M&L for 50mm thick cement concrete (1:3:6) type C-2(using 40mm graded stone aggregate), as in flooring, paving,path etc finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for forming Construction joint 75mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc.6 m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brick work with old size sub class B bricks straight or curved on plan exc.6 m mean radius built in cement mortar (1:6) except bricks complete all as specified and directed.

M&L for PCC(1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work if required complete all as specified and directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M&L for joint free anti-skid outdoor pavement tiles (Endura) of size 300mmx300mmx10mm thick, coloured, set, jointed and pointed in neat cement slurry with grey cement & pigment as in floor, path etc over & including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for 100mm thick PCC(1:2:4) type B-2 using 40mm graded aggregate as in hardstanding, pavings etc including necessary form work and spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

Taking down cement plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water complete all as specified and directed.

M&L for 15mm thick cement plaster in cement mortar (1:4) on fair faces of brickwork or concrete surfaces and finished even and smooth without using extra cement complete all as specified and directed.

M&L for two coats of cement base paint on newly plastered wall surfaces over a coat of cement primer including necessary preparation of surfaces complete all as specified and directed.

Excavation in trenches not exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and getting out in soft/loose soil complete all as specified & directed .

Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed.

Returning filling in including spreading, leveling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified & directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion concrete and making good disturbed ground complete all as specified and directed.

Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out in hard/ dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50m and making good the surface complete all as directed.

M&L for PCC (1:3:6) type C2 using 40 mm graded stone aggregate ) as in foundation, filling and mass concrete etc. all as directed.

M&L for Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area n exc 100 sq. cm, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

Providing reinforced cement concrete type B-l, 1:2:4 (20 mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc. for fencing, average sectional area exc 100 sq. cm & n, exc 250 sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

M&L for TMT bars of 10mm dia and over cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as directed.

M&L for TMT bars of 6 to 8 mm dia cut as in stirrups, spacers and binders cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips, complete all as specified and directed.

Supply only for MS round bars 10mm dia for securing chain link fencing fixed to fencing posts as directed by Engineer-in-Charge as per Fe-410-S or 0.

Dismantling wrought iron or mild steel works of any description not otherwise provided for.

S&F for mild steel angle iron posts and struts including cutting tops to shape as directed drilling holes notching for wire etc. conforming to Fe-290, Gde E-165.

M&L Framed work such as grillsgratings, etc.. with ends of bars,shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; Flat iron ,framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for 12mm bolts and nuts (machine made) with hexagonal or square head at one end and screwed the other with washers of length n exc 5 cm long .

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete over 10 cm width or girth.

M&L for applying one coats of synthetic enamel paint including preparation of old steel surfaces complete over 10 cm width or girth all as directed

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces of any description, n.exc 10cm in width or girth when unconnected with other painting or when painted in a different tint

Dismantling chain link fencing any type incl. MS flat, round bars and nuts and bolts etc. complete all as directed by Engineer-in-Charge.

Supply Only for galvanized iron chain link fencing with 3.8mm to 4mm dia wire mesh size 100mm x 100mm completed all as directed by Engineer-in-Charge.

Fixing only chain link fencing including line wires, any mesh, size and type to any type standerds, rails, straining bolts, etc. including provision of binding wire

S&F in repair for galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2.00mm dia barbs at 75cm spacing and straining and fixing to any type of standard rail straining bolts incl. securing or tying at crossing with and provision of galvanized mild steel wire staples or steel pin etc as directed (Each line of wire to be measured).

APOLLO TRADERS

M/S A. J. CONSTRUCTION

M/S. B. N. CHATTERJEE

Das and Brothers

Electro Builders

Renuka Fero Products

KAZI ENTERPRISE