Providing LIS Bella (Bikram Bag) in Tehsil Nahan Distt. Sirmour HP

Amount

Excavation in foundation & plinth in earth work in all kinds of soil containing spade work, blasting work, jumper work including decomposed soft and hard rock etc. with all lifts stacking the excavated soil not mote than 3 m trs clear from the edge of the excavation and then returning the stacked soil in 15cm layer when required into plinth side of watering and then disposing of all surplus excavated earth with in all leads, lifts foundation etc. consolidating each deposited layer by ramming and complete in all respects and as directed by the Engineer Incharge.

Providing and laying cement concrete 1:4:8 (1cement:4app.sand:8app. graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all height and depth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and laying cement concrete 1:1 ½:3(1cement:1½app.sand:3app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work in foundation and plinth, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge..

Providing and laying cement concrete 1:1 ½:3(1cement:1½app.sand:3app.graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work and reinforced for reinfoece concrete work in wall(any thickness not less than 0.1m thickness) attahced pillaster buttresses, plinth and string courses etc. from top of foundation level upto floor two level,including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge..

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30X30X5mm . So as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in, including all leads, lifts for insitu-reinforced concrete and plain concrete work in, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

a)Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses,plinth and string sources and the like.

Providing tor steel reinforcement for RCC work including banding, binding and placing in polsition complete upto floor two lelvel including all leads, and carriage of material at site and as directed by the Engineer Incharge.including cost of binding wires.

Laying G.I pipe 50mm dia nominal size , including all leads, lifts and carriage of material at site and as directed by tbe Engineer Incharge.

Providing and Fixing C.I Sluice valve with hand wheel) as per IS 780 class upto 300mm dia including brass spindle and as per IS 2906 Class-II diameters more than 300mm complete with nut bolts rubber in sertion etc(The tail piece if required shall be measured and paid for seperately)

50mm nominal size

Steel work welded in built up sections , trusses and framed work including cutting, hoisting, fixing in position and applying and priming coat of red lead paint in gratings, framed guard bars, ladders, railings , brackets and similar work. including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Excavation in foundation & plinth in earth work in all kinds of soil containing spade work, blasting work, jumper work including decomposed soft and hard rock etc. with all lifts stacking the excavated soil not mote than 3 m trs clear from the edge of the excavation and then returning the stacked soil in 15cm layer when required into plinth side of watering and then disposing of all surplus excavated earth with in all leads, lifts foundation etc. consolidating each deposited layer by ramming and complete in all respects and as directed by the Engineer Incharge.

Providing and laying cement concrete 1:6:12 (1cement:6app.sand:12app.graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all height and depth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Brick work using common burnt clay building bricks (2nd class) including racking out joints in cement mortar 1:4 (1cement :4sand)foundation and plinth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing and laying 38mm thick cement concrete 1:2:4(1cement:2app.sand: 4app.graded stone agg.12.5mm nominal size and curing complete.I/c all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Applying coat of hot bitumen(mexphlat 80/100 or equipment using 1.70Kg per square metre on damp proof, course after cleaning the surface with a cloth lightly socked in Kerosine oil, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Brick work using common burnt clay building bricks (2nd class) including racking out joints in cement mortar 1:4 (1cement :4sand)extra for super structure above plinth level and upto floor two level including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30X30X5mm . So as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for insitu-reinforced concrete and plain concrete work in, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

a)Flat surface such as soffits of suspended floors, roofs,landings and the like floors etc.in all thickness.

Providing and laying reinforced cement concrete work 1:2:4(1cement:2app.sand:4app. graded stone aggregate 20 mm nominal size) nominal size and curing complete excluding cost of form work and reinforcement for RCC work in suspended floors roofs, landings shelves and their supports balconies beams,girders bressumers and cantilevers upto floor two level in all height and depth, including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing tor steel reinforcement for RCC work including banding, binding and placing in polsition complete upto floor two lelvel including all leads, and carriage of material at site and as directed by the Engineer Incharge.including cost of binding wires.

20mm cement plaster in single coat on rough side of brick /stone masonary for interior plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80-mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6app.sand) including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

15mm cement plaster in single coat on rough side of brick /stone masonary for interior plastering upto floor two level including arrises, internal rounded angles,chamfers and/or rounded angles not exceeding 80-mm in girth and finished even and smooth in cement mortar 1:3 (1cement:3sand) including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Pointing on brick work with cement mortar 1:3(1cement:3sand)Ruled pointing including entire carriage of material up to all leads and lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately).2nd class deodar wood)

Providing and fixing panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :2nd class deodar wood)

Cement concrete flooring 1:2:4(1cement:2app.sand:4app.graded stone aggregate 20 mm nominal size) laid in one layer finished with floating coat of neat cement40mm thick including all lead, lifts and arriage of material at site and as directed by the Engineer Incharge.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting: ready mixed paint brushing wood primer pink,including all , leads, and carriage of material at site and as directed by the Engineer Incharge.

Painting two coats(excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of all dirt dust and other foreign matter, sand papering and stopping with paint other than white , including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

White washing with lime on undecorated wall surfaces(two coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar dirt and other foreign matter.including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

C/Ostone Kharanja drain 45cm width with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6: (1cememt : 6 sand) including earth work 100mm bed concrete 1:5:10( 1cement:5ap sand: 10app graded stone cment plaster 1:3 (1cement : 3agg sand) inclduing all leads, lifts and carriage of material at site and as directed by the Engineer incharge.

Providing plinth protection 50mm in cement concrete 1:3:6 (1cement:3app. sand: 6app. graded stone aggregate 20mm nominal size) including finishing the top surface of concrete smooth including all leads, lifts and carriage of material at site and as directed by the Engineer Incharge.

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand :6 graded stone aggregate 20mm nominal size)

Providing and fixing Aluminium tower bolts ( barel type) with necessary screw etc. complete 250x10mm including all lead lifts and cariirage of material at site and as directed by the Engineer Incharge

Providing and fixing Aluminium handles with necessary screw etc. complete including all lead lifts and cariirage of material at site and as directed by the Engineer Incharge 125mm dia

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete 250x16mm including all lead lifts and cariirage of material at site and as directed by the Engineer Incharge

Anshul Walia

ABHIMANYU CHOUDHARY

M/S Sharma Enterpirses