Repairing/Renovation of I.T.I Building at MORBI, Dist. Morbi ( By providing Toilet Renovation, Vitrified Tiles, Plaster, color, Door-Window etc.)

Name of Work :-Repairing/Renovation of I.T.I Building at MORBI, Dist. Morbi ( By providing Toilet Renovation, Vitrified Tiles, Plaster, color,

Door-Window etc.)

=// Bill of Quantities //-

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

1 28.00 Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing Each 414.23 Rupees Four Hundred Estimated

tank etc. including stacking the materials with all lead and lift. Fourteen Paise Twenty

2 1095.00 Dismentaling tiled of stone floors laid in mortar including stacking of serviceable materilas SqM 49.12 Rupees Fourty Nine Paise

and disposal of unserviceable materials with all lead and lift. Twelve Only

3 6773.00 Removing dry or oil bound distemper by a washing and scraping and sand papering the wall Sqm 11.53 Rupees Eleven Paise Fifty

surface smooth including necessary repairs to scratches complete. Three Only

4 1822.00 Removing dry or oil bound distemper by a washing and scraping and sand papering on SqM 13.21 Rupees Thirteen Paise

ceilings and sloping roofs smooth including necessary repairs to scratches complete. Twenty One Only

5 8595.00 Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C SqM 19.89 Rupees Nineteen Paise

member including stacking of serviceable material and disposal of unserviceable from site Eighty Nine Only

of work with all lead and lift.

6 191.00 Scraping oil paint from steel and other metal surface and making the surface even (with Sqm 51.78 Rupees Fifty One Paise

Hand Scraping.) Seventy Eight Only

7 1822.00 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior SqM 108.58 Rupees One Hundred Eight

plastering upto floor two level and inished even and smooth in (iii) Cement mortar 1:6 Paise Fifty Eight Only

(1-cement:6-sand)

8 4178.00 Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half Sqm 141.48 Rupees One Hundred

brick walls for interior plastering upto floor two level and finished even and smooth in (iii) Fourty One Paise Fourty

Cement mortar 1:6 (1-cement:6-sand) Eight Only

9 2596.00 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level SqM 315.69 Rupees Three Hundred

consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick Fifteen Paise Sixty Nine

finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. Only

10 6000.00 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of SqM 40.59 Rupees Fourty Paise Fifty

approved brand and manufacture on new wall surface to give an even shade including Nine Only

thoroughly brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

11 6000.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture SqM 84.37 Rupees Eighty Four Paise

on undecorated wall surface to give an even shade including throughly brushing the surface Thirty Seven Only

free from mortar droppings and other foreign matter and sand papered smooth.

12 2596.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to SqM 120.26 Rupees One Hundred

give an required shape even shade after thoroughly brushing the surface to remove all dirt, Twenty Paise Twenty Six

and remains of loose powdere materials.etc complete Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

13 2824.00 Providing and fixing M.S. grills of required pattern to frames of windows etc. with M.S. KG 109.24 Rupees One Hundred Nine Estimated

flats at required spacings and frame alround, square or round bars with round headed bolts Paise Twenty Four Only

and nuts or by screws (A) Plain Grill.

14 96.00 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 72.65 Rupees Seventy Two Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Sixty Five Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

15 128.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt. 91.84 Rupees Ninety One Paise

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Eighty Four Only

wall with the help of clamp at every two metre C/C or shall be concealed as directed

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

16 75.00 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt. 148.12 Rupees One Hundred

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Fourty Eight Paise Twelve

wall with the help of clamp at every two metre C/C or shall be concealed as directed Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

17 75.00 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt. 195.67 Rupees One Hundred

cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Ninety Five Paise Sixty

wall with the help of clamp at every two metre C/C or shall be concealed as directed Seven Only

including necessary fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

18 95.00 Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) Rmt. 834.38 Rupees Eight Hundred

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, Thirty Four Paise Thirty

& fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, Eight Only

pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every

mm center to center or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

19 212.00 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) Rmt. 876.90 Rupees Eight Hundred

conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, Seventy Six Paise Ninety

& fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, Only

pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using

of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every

mm center to center or shall be concealed in walls as directed including necessary fittings

such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

20 90.00 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene Rmt. 280.23 Rupees Two Hundred

pipes of the following outside Dia. Low densidy, complete with special falnge compression Eighty Paise Twenty Three

type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

21 5.00 Providing and fixing in position cowel went to pipes.(B) 75mm dia. Each 393.04 Rupees Three Hundred Estimated

Ninety Three Paise Four

22 5.00 Providing and fixing in position cowel went to pipes.(C) 100mm dia Each 505.17 Rupees Five Hundred Five

Paise Seventeen Only

23 16.00 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. Each 89.83 Rupees Eighty Nine Paise

Eighty Three Only

24 18.00 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali Each 586.27 Rupees Five Hundred

of the following nominal diameter of self cleansing design with C.I scread down or hinged Eighty Six Paise Twenty

grating including the cost of cutting and making good the walls. Seven Only

25 50.00 Providing and fixing screw down bib taps of following size.(B) Brass chromium plated Each 186.83 Rupees One Hundred

screws down Bib Tap. (i) 15mm dia. Eighty Six Paise Eighty

26 16.00 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, Each 354.69 Rupees Three Hundred

shanks and back nuts. (ii) 20mm dia. Fifty Four Paise Sixty Nine

27 30.00 Providing and fixing brass screw down stop tap.(A) 15mm dia. Each 205.83 Rupees Two Hundred Five

Paise Eighty Three Only

28 10.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia Each 186.83 Rupees One Hundred

Eighty Six Paise Eighty

29 10.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Each 420.63 Rupees Four Hundred

Twenty Paise Sixty Three

30 8.00 Providing and fixing water closet squatting Pan (Indian type W.C. Pan) size 580mm Each 987.14 Rupees Nine Hundred

(Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Eighty Seven Paise

Vitreous China.(I) Long pattern = White colour Fourteen Only

31 12.00 Providing and fixing chromium plated brass half trun flush cock of approved quality Each 254.78 Rupees Two Hundred Fifty

including fixing in pipe line etc. complete.(i) 20mm dia. Four Paise Seventy Eight

32 16.00 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on Each 859.41 Rupees Eight Hundred Fifty

6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws Nine Paise Fourty One Only

33 20.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets Each 1581.77 Rupees One Thousand Five

painted white including sutting holes and making good the same but excluding fittings.(A) Hundred Eighty One Paise

Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. Seventy Seven Only

34 3.00 Providing and fixing Urinal or approved quality including conecting the Urinal with waste Each 1074.86 Rupees One Thousand

pipe , tap etc. complete.(A) White earthenware flat back or corner type size 430mm x Seventy Four Paise Eighty

260mm x 350mm Six Only

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

35 4.00 Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S Each 1356.81 Rupees One Thousand Estimated

trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) Three Hundred Fifty Six

(Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in Paise Eighty One Only

36 890.00 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 SqM 779.70 Rupees Seven Hundred

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to Seventy Nine Paise Seventy

be tempered to bring mortar creme out upto surface using white cement including Only

rounding off junctions and extending them upto 15 cm along the wall,clearing with water

and oxalic acid etc. as directed.

37 890.00 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded SqM 339.08 Rupees Three Hundred

stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of Thirty Nine Paise Eight

neat cement. (B) 50mm thick. Only

38 14.00 Providing and laying Mirror polished Machine polished Granite stone slab 18 mm SqM 3143.12 Rupees Three Thousand

(Average) thick for For Doors / WIndows cill & Jams Clading as per design incl. full One Hundred Fourty Three

moulded round front edge in trade of steps laid on 20 mm thick cement mortar 1:6 (1 - Paise Twelve Only

cement : 6 coarse sand ) jointed with grey cement slurry including rubbing and polishing

39 221.00 Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on SqM 1127.48 Rupees One Thousand One

10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement Hundred Twenty Seven

slurry Paise Fourty Eight Only

40 874.00 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of steps SqM 1120.36 Rupees One Thousand One

and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) Hundred Twenty Paise

finishing with flush pointing in white cement. Thirty Six Only

41 128.00 Providing and fixing standared extruded of alluminium section of size 63mm x 38.10mm x SqM 1175.56 Rupees One Thousand One

1.2mm , @ Wt. 0.643 Kg/mt with colour Powder Coated alluminium frame for ventilation Hundred Seventy Five Paise

with 5 mm thick frosted glass as details etc complete for Ventilation Fifty Six Only

42 3.00 Steel work, riveted in built up sections framed work including cutting, hoisting, fixing in Qntl. 6747.08 Rupees Six Thousand

position and applying a priming coat of red lead paint. (D) In trussses and trussed purlins, Seven Hundred Fourty

upto 25 M. span and 15 M ovarall height. Seven Paise Eight Only

43 106.00 Providing and fixing Anodized coloured Aluminum composite Panel with 4 mm Sqm 2138.17 Rupees Two Thousand One

thick/Required Glass PVDF coated aluminum foil of approved colour on 50x25 mm Hundred Thirty Eight Paise

aluminum section cleding using tra system as per design with clamping and sealing the Seventeen Only

joints with silicon structural sealant GE-winsil 20 incl. necessary scaffolding etc. complete

for all height.

44 25.00 Providing & fixing stainless steel (stainless steel plate of 302 No. ) letter of 45c.m. size No 1939.81 Rupees One Thousand Nine

finished with radium sticker including necessary scaffolding for fixing with epoxy material Hundred Thirty Nine Paise

etc. comp. as directed by engineer in charge (Additional Article of Gujarati letter are Eighty One Only

consider as a half letter)

45 292.00 Painting two coats and one priming coat steel and other metal surface with Chemical and Sqm 130.95 Rupees One Hundred

Corrosion resistance epoxy paint including preparing the surface by throughly cleaning, Thirty Paise Ninety Five

oil,grease, dirt and other foreign matter and scoured with brushes fine steel wood, scrapers Only

and sand paper with. complete as directed by Engineer-in-charge.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

46 109.00 Reapirs and Re-fitting of doors, window and Cup Board shutters by providing necessory Sqm 1313.05 Rupees One Thousand Estimated

teak wood member, glass/Acrylic sheet and necessry hardware fitting and including Three Hundred Thirteen

touching the new member by matching existing oil painting, shed etc. complete as directed Paise Five Only

including all cost of labour and materials.

47 189.00 Repairing of existing aluminium section doors /windows/partitions including replacement of Sqm 1074.64 Rupees One Thousand

damaged sections, tightening of loose fittings, renewal of accessories, and ensuring proper Seventy Four Paise Sixty

alignment and smooth functioning of shutters. Four Only

48 189.00 Providing and Fixing Impulse Blackout Roller Blinds with fabric of 0.53mm thickness and Sqm 1768.51 Rupees One Thousand

Top channel of non-rusting aluminium alloy with 1.25mm thickness and bottom channel of Seven Hundred Sixty Eight

1.50mm thickness & 21mm diameter. Tilt channel of ABS plastic with 1.50mm polys Paise Fifty One Only

49 12.00 Providing & Fixing Double Shutter Door Having Granite Frame With All Open Edges Sqm 2938.28 Rupees Two Thousand

Machine Cut & Machine Polished, Fixed By Zinc Coated Hinges With Double Shutter Of Nine Hundred Thirty Eight

factory Made & Stamped I.S 12823 Grade One, Type One 35mm THK Solid Core, Paise Twenty Eight Only

Melamine Faced, Three layered Resin, Flushed Door, Having Decorative lamination On

Both Sides & 12mm ThK T.W. Beading Fixed Around The Door, From 'NOVAPAN" OR

Equivalent Company Holding Licence For Minimum 5 Years as per Detailed specifications.

50 30.00 Providing and fixing FRP frame size 100x50 mm and 35 mm thick FRP depress panel Sqm 2377.76 Rupees Two Thousand

shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the Three Hundred Seventy

shutter & frame is to be filed up with injected fire retardant grade polyurethene foam done Seven Paise Seventy Six

in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. Only

The whole FRP frame & shutter is to be water proof weather proof, termite proof &

resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with necessary screws

& alluminium fixtures & fastenings & fastener sleeve selected as per detail architectural

Amount in Words :

Rupees Seventy Three Lakh Ten Thousand One Hundred Ninety Seven Paise Twenty Five Only

I / We am/are willing to carry out the work at ......................................................………………... % above / below (Should

be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.

Estimated amount Estimated amount

Put to tender Rs. …………………… Put to tender Rs…………………..

Add……….. % above Rs. …………………… Deduct…….% below Rs…………………..

Total Rs. …………………… Net Rs…………………..

In words……………………………… In words……………………………………….

[1] The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.

[2] The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

Item Quantitie Item of Works Unit Estimated Rates Total Amount

Item Quantitie Item of Works Unit Estimated Rates Total Amount

No. Estimated Rs. in Figure Rs. In Words Accourding to

[3] GST and Income tax TDS will be deducted at a source while making payments of bills Estimated

[4] In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.

therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of

input rate mentioned in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R & B Sub Division R & B Division