CONSTRUCTION OF JHALAWAD MEMORIAL & HERITAGE MUSEUM PHASE 1 DISTT. SURENDRANAGAR (2nd Attampt)

Surendranagar Municipal Corporation

NAME OF PROJECT : Construction of Jhalawad Memorial & Heritage Museum Phase

Bill of Quantities

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Demolition including stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift. For R.C.C. work, brick work, tile

work, bathroon & toilet fixtures, windows & Doors and also ventilation, etc

1 complete as per detailed, directed & approved by the consultant / EIC Job 1.00 404,000.00

Carryout Soil Investigation work including exploratory drilling of 150 mm dia

borehole in all sorts of soil& Rock up to 10m depth from G.L, collecting

undisturbed samples at an interval of 1.5 m. depth, determining depth of

water table etc. Conducting necessary laboratory tests for all type of

classification and determination of soil parameters necessary for

2 determining pile capacity like density, shear and consolidation parameters Job 1.00 44,844.00

etc., including submission of report in three copies covering investigation

data and recommendation for SBC etc. all as per specification at required

Contour survey work for prepaing contour maps by taking cross-section at

every 30M. intervals including all, labour materials and instruments. This

item includes the submission of autocad file of total site survey, etc

complete as per detailed, directed & approved by the consultant / EIC

Excavation for foundation upto 1.5 m depth including sorting out and

4 stacking of useful materials and disposing off the excavated stuff upto 50 Cmt 3051.00 117.08

Meter lead.(A) Loose or soft soil

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting

out and stacking of useful materials and disposing off the excavated stuff up

5 to 50 Meter lead.(C) Hard Murrum, etc. complete as per detailed & directed Cmt 1681.00 273.54

Filling available excavated earth (excluding rock) in trenches. plinth, sides of

foundations etc. in layers not exceeding 20 cm. in depth consolidating each

6 disposited layer by ramming and watering. Cmt 3763.00 130.39

Filling in foundation and plinth with murrum or selected soil in layers of

7 20cm. thickness including watering, ramming and consolidating etc. Cmt 2273.00 282.02

complete. (more than 10 ton)

Carring out plinth treatment to post construction /existing structure by

spraying chemical solution for termite control treatment including labour

and material consistment with I.S.I specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent

is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1%

8 concrentration inclusive of one litre chemical emulsion appication at the rate Smt. 775.00 56.63

of 5 Litre chemical /Sqm of sur face is recommended as per I.S

Providing and laying cement concrete 1:2:4 (1- Cement : 2-Coarse sand : 4-

9 graded stone aggregates 20 mm nominal size) and curing complete Work in Cmt 440.00 3,631.49

(A) Foundation and Plinth

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

10 reinforced concrete work in (A) Foundations, footings, Base of columns and Cmt. 339.00 4,626.81

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

11 reinforced concrete work in (B) Walls below the plinth Cmt. 26.50 6,655.90

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

12 reinforced concrete work in (B) Walls, for Ground floor Cmt. 8.00 6,655.90

ARCHITECT: ARG Creation Pvt. Ltd. 1 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (B) Walls, Extra for additional lift of concrete for

all R.C.C. work above floor two level excluding cost of reinforcment for First

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (B) Walls, Extra for additional lift of concrete for

all R.C.C. work above floor two level excluding cost of reinforcment for

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

15 reinforced concrete work in columns below plinth Cmt. 51.50 5,214.63

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area at Ground Floor lvl. etc., for any type of cross section area

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

17 reinforcement for RCC work in (D) For Columns for any type of cross Cmt. 30.50 7,059.27

sectional area at First Floor lvl. etc., for any type of cross section area

complete as directed by E. I. C.

Providing and laying controlled cement concrete M:250 and curing complete

including cost of necessary, form work, compacting with vibrator curing

centering & shuttering in true line and level etc, but excluding the cost of

reinforcement for RCC work in (D) For Columns for any type of cross

sectional area at Terrace Floor lvl. etc., for any type of cross section area

complete as directed by E. I. C.

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

19 reinforced concrete work in Beams upto floor two level: PLINTH BEAM / Cmt. 112.50 6,177.16

Ground beam / Tie beam

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

20 reinforced concrete work in Lintels / Copping upto floor two level. Cmt. 16.00 6,120.60

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforcement for

21 reinforced concrete work in Chajjas upto floor two level. Cmt. 9.00 6,832.65

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork but excluding the cost of reinforcement for

22 reinforced concrete work in © Slabs upto floor two level. : Grade slab Cmt. 128.50 4,749.02

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in © Slabs, landing, shelves, Balconies, Lintels,

Beams, Girders and Cantilever upto floor two level. :Ground Floor Staircase

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in © Slabs, landing, shelves, Balconies, Lintels,

Beams, Girders and Cantilever upto floor two level. : First Floor Staircase

ARCHITECT: ARG Creation Pvt. Ltd. 2 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and laying controlled cement concrete M.250 and curing complete

including the cost of formwork and excluding the cost of reinforcement for

reinforced concrete work in © Slabs, landing, shelves, Balconies, Lintels,

Beams, Girders and Cantilever upto floor two level. : Terrace Floor Staircase

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

26 work in © Beams upto floor two level. . : GROUND FLOOR BEAM Cmt. 82.50 6,612.47

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

27 work in © Beams upto floor two level. . : FIRST FLOOR BEAM Cmt. 61.50 6,652.05

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost ofreinforced concrete

28 work in © Beams upto floor two level. . : TERRACE FLOOR BEAM Cmt. 13.00 6,691.63

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced concrete

29 work in (C) Slabs upto floor two level. :Ground floor Slab Cmt. 106.00 6,445.82

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced concrete

30 work in (C) Slabs upto floor two level. :First floor Slab Cmt. 93.00 6,485.40

Providing and laying controlled cement concrete M.250 and curing complete

Including the cost of formwork but excluding the cost of reinforced concrete

31 work in (C) Slabs upto floor two level. :Terrace floor Slab Cmt. 15.50 6,524.98

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending,

32 binding and placing in position complete upto all floor level. kg 143125.00 76.21

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

33 Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Cmt. 33.00 4,051.78

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement

Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional Extra for brick work

in superstructure above plinth level upto floor two level (B) Conventional

ARCHITECT: ARG Creation Pvt. Ltd. 3 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing of AAC Panels of Thickness 125mm / 100 mm (Brand

Name- ZmartBuildwall by NXT Bloc) in line and level with consideration of

below Specification, Inculding cutting, groove filling with water proof

bonding sealent / Putty , at all height work as per IS : 6072 having a tongue

groove edge. The rate should also be include of all L clips, power tools

nacessary to cutting jointing and finishing work including PPEs, Filling of

joint with the bonding compound and wire mesh overlapping at both the

sides about 50 mm. Mode of measurement would be a finish surface only.

The rate also include the cutout making at site in pre designing factored

complete as per detailed & approved by the consultant & directed by EIC.

PARAMETERS SPECIFICATIONS

Density 550 to 750 Kg/m3

Compressive Strength > 4 N/mm2

35 Flexural Strength > 1 N/mm2 Smt 1213.00 3,374.39

Tolerence + - 1mm

Fire Resistance 4 Hours (100 mm)

STC Rating 43 db(100 mm)

MEP Installation difficulty level Very Low

Thermal Conductivity 0.12 (W/K-m)

Coefficient of Thermal Expansion 8x10-6/K

Modulus of Elasticity 2190 Mpa

Half brick masonry in common brunt clay building bricks having crushing

strength not less than 35 Kg/Sq.Cm. in cement mortar 1:5 ( 1- Cement : 5 -

coarse sand ) in foundation and plinth (B) Conventional Extra for half brick

36 masonry in superstructure above plinth level upto floor two level. (B) Smt 10.00 641.16

Providing & Fixing the Chikenmesh - 20 guage(Crimp Jali) of approved size

applying between the RCC and masonry junction in proper line, level and

plumb with all material, labour, tools, tackles and equipment. Including

providing and fixing the jali with nails, etc complete as directed by the site-

Providing & laying average 18-20mm thick double coat water proof smooth/

wired finish cement plaster on sides of masonry work/ block wall/ RCC wall,

12 to 15mm thick first coat in CM 1:3 (1 cement : 3 coarse sand) by

spraying, second coat of 6mm of CM 1:3 (1 cement : 3 fine sand) and mixing

water proofing compound powder & liquid of approved make in

recommended proportions (by manufacturers) in both coats including

finishing with a flooting coat of neat cement slurry etc complete for all floor.

and shall be guaranteed for minimum period of 10 years after handing over

the completed building by the main contractor to be finished as directed.

38 Stamp paper guarantee 10 years to be furnished before receiving any Smt 380.00 334.48

payment from the client. Waterproofing powder & liquid of approved make

recommended proportions is to be applied before each coat and final

finishing coat. (Item shall be operated for water retaining structures, sunks,

basement walls & Slab(10mmthk.) and other places specified by Architect/

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of

single or half brick walls for interior plastering upto floor two level and

39 finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4-sand) Smt 103.00 163.85

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

40 (ii) Cement mortar 1:4 (1-cement :4-sand) Ground floor level Smt 707.00 123.13

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

41 (ii) Cement mortar 1:4 (1-cement :4-sand) First floor Smt 620.00 171.34

ARCHITECT: ARG Creation Pvt. Ltd. 4 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing 10mm thick cement plaster in single coat on brick/concrete walls

for interior plastering upto floor two level and finished even and smooth in

42 (ii) Cement mortar 1:4 (1-cement :4-sand) Second floor Smt 104.00 219.54

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete as approved and directed by Consultant / EIC.

Washed stone grit plaster on exterior walls height upto 10 metre above

ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement

: 4 coarse sand ), furrowing the under layer with scratching tool, applying

cement slurry on the under layer @ 2 Kg of cement per square metre, top

layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone

chipping 10 mm nominal size), in panels with groove all around as per

44 approved pattern, including scrubbing and washing the top layer with Smt 931.00 1,173.87

brushes and water to expose the stone chippings ,complete as per

specification and direction of Engineer-in-charge (payment for providing

grooves shall be made separately).

Forming groove of uniform size in the top layer of washed stone grit plaster

as per approved pattern using wooden battens, nailed to the under layer,

including removal of wooden battens, repair to the edges of panels and

finishing the groove complete as per specifications and direction of the

Engineer-in-charge :

40 mm thick fine dressed stone flooring over 20 mm (average) thick base of

cement mortar 1 :5 (1 cement : 5 coarse sand), including pointing with

cement mortar 1 :2 (1 cement: 2 stone dust) with an admixture of pigment

44.2 to match the shade of stone. Red sand stone Smt 242.00 1,541.31

Stone work (machine cut edges in veneer work) for wall lining upto 10 m

height, backing filled with a grout of 12 mm thick cement mortar 1 :3 (1

Cement : 3 coarse sand) and jointed with Cement mortar 1 :2 (1 cement :

stone dust), including grinding with hand grinder on joints, rubbing and

polishing complete. (To be secured to the backing and the sides by means of

45 cramps and pins which shall be paid for separately). Dressed sand stone of Smt 456.00 4,151.10

approved shade by architect and EIC complete as per specification including

all tools. Sand stone

Supplying and fixing of GRC Jharokha 1 exact as per Image & specification

45.01 Size and complete as per detailed drawing & Directed by EIC. Smt 16.00 9,780.84

Supplying and fixing of GRC Jharokha 2 exact as per Image & specification

45.02 Size and complete as per detailed drawing & Directed by EIC. Smt 72.00 9,780.84

Supplying and fixing of GRC Column 1 exact as per Image & specification

45.03 Size and complete as per detailed drawing & Directed by EIC. Smt 48.00 8,694.08

Supplying and fixing of GRC Column 2 exact as per Image & specification

45.04 Size and complete as per detailed drawing & Directed by EIC. Smt 22.00 8,694.08

Supplying and fixing of GRC Arch 1 exact as per Image & specification Size

45.05 and complete as per detailed drawing & Directed by EIC. Smt 36.00 7,607.32

Supplying and fixing of GRC Arch 2 exact as per Image & specification Size

45.06 and complete as per detailed drawing & Directed by EIC. Smt 39.00 7,607.32

Supplying and fixing of GRC Jali exact as per Image & specification Size and

45.07 complete as per detailed drawing & Directed by EIC. Smt 6.00 8,694.08

Supplying and fixing of GRC Moulding 1 exact as per Image & specification

45.08 Size and complete as per detailed drawing & Directed by EIC. Rmt 270.00 7,607.32

ARCHITECT: ARG Creation Pvt. Ltd. 5 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and fixing of GRC Jhinjhuwada style arch exact as per Image &

45.09 specification Size and complete as per detailed drawing & Directed by EIC. Smt 18.00 29,342.52

Supplying and fixing of GRC Railing 1 exact as per Image & specification Size

45.10 and complete as per detailed drawing & Directed by EIC. Smt 44.00 5,899.41

Supplying and fixing of Precast lime Thambli exact as per Image &

45.11 specification Size and complete as per detailed drawing & Directed by EIC. Nos. 750.00 1,515.00

Supplying and fixing of GRC Dome type 1 as per Image & specification and

45.12 Size and complete as per detailed drawing & Directed by EIC. Nos. 2.00 98,681.04

Providing and fixing 18 mm thick gang saw cut, mirror [Hi-Gloss] polished at

all exposed Surface, Pre-moulded and pre-polished, machine cut Granite of

any colour and shade, & finish, as per detailed by architect /Consultant for

flooring, dado skirting, cladding, steps and risers, kitchen platforms, vanity

counters, window & Door sills , fascias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick mortar 1:4 (1 acid

proof cement : 4 coarse sand). And In dado/skirting on In dado/skirting on

12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand), joints treated

46 with white cement, mixed with matching pigment, epoxy touch ups, Smt 66.00 3,504.70

including BSpacer tape 6.4 mm thick x 4 TO 6 mm as per detailed groove,

rubbing, curing, moulding and polishing to edges to give high gloss finish as

per concept etc. complete at all levels.

Providing and fixing 18 mm thick gang saw cut, Ruff [Send-blasted-

LAPORTA] polished in pattern & at all edges should be molded in rquired

finish, Pre-moulded and pre-polished, machine cut Granite of any colour

and shade, & finish & texture, as per detailed by architect / Consultant, for

flooring, dado skirting, cladding, steps and risers, kitchen platforms, vanity

counters, window sills , fascias and similar locations of required size,

approved shade, colour and texture laid over 20 mm thick mortar 1:4 (1 acid

proof cement : 4 coarse sand). And In dado/skirting on In dado/skirting on

47 12 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand), joints treated Smt 1164.00 4,146.56

with white cement, mixed with matching pigment, epoxy touch ups,

including Spacer tape 6.4 mm thick x 4 TO 6 mm as per detailed groove,

rubbing, curing, moulding and polishing to edges [Ruff [Send-blasted-

LAPORTA] polished] to give high gloss finish as per concept etc. complete at

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

48 flooring and jointed with color cement slurry including finised with flush Smt 26.00 1,204.20

pointing & cleaning the surface etc. complete for light shade / Dark Shade

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

49 flooring and jointed with color cement slurry including finised with flush Smt 42.00 1,397.83

pointing & cleaning the surface etc. complete for antiskit

Providing and laying Vitrified tiles 8 to 10 mm thick, 24'' x 24'' in skrting

50 risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3- Smt 360.00 1,141.45

coarse sand) and jointed with white cement slurry

Providing and laying polished Kota stone slab flooring over 20mm (Average)

thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry

51 mixed with pigment to match the shade of slab including rubbing and Smt 26.00 971.95

polishing etc. complete. (A) 25mm thick

ARCHITECT: ARG Creation Pvt. Ltd. 6 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing 0.70 meter wide sandwich type platform including

supplying and fixing granite stone 18 mm thick mirror polished stones in

top and side position and vertical strip at front over 25 mm thick polished

kota stone platform fixing in top and sides and intermediates supports

52 fixing with cement mortar and adhesive and finishing including making Smt 4.00 7,910.56

recess for Kitchen/ Laboratory sink etc. complete as approved and directed

by Consultant / EIC.

Providing and fixing 35 mm thick ISI marked flush door shutters conforming

to IS : 2202 (Part I) Thick Both Side Laminated Water Proof FLUSH DOOR

SHUTTERS of ARCHIDPLY/ CENTURY make including first class hardwood and

cross band, block board core

with plywood face panels, Approved Granite frame as per detail, Hylandpine

code -1208 1mm thk. laminate of Sunmica make including "Lx. Premium"

53 Platinum Finish Accessories As per Architect Concept & Design., ISI make, Smt 78.00 8,776.90

including providing and applying primer coat and two coats of oil painting

OR French polishing of Asian make to the edges and frame. etc. complete as

per detailed by Architect / Consultant and directed by EIC.

Providing & Fixing Walnut anodized Aluminum Hi-Profile sections (JINDAL-

DOMAL Series), hI-perfomance Sliding/ Openable window with Required

thick glass of Saint Gobain or equielent, is used for Aluminum Hi-Profile

Section with necessary accessories and with additional shutter with Stainless

Steel Mosquito net. [In Opening Position always one of Mosquito net shouter

should be in Close Position], captive bead, extremely difficult to remove once

glazed, high performance weather stripping, internal wedge gasket, Bottom,

side and top section including necessary filling up the gaps at junctions, with

required EPDM rubber/ etc. and ISI ebco make,"Lx. Premium" Required

Finish door fixture Accessories As per Architect Concept, High security

interlocking bead, Sheet membrane flashing , 2" over jamb flashing, New

Blocking with new backer rod and sealant, channel glide with runner, slide

fold hinge when ever need of sufficient capacity, with warranty, all types of

material, labour, transportation, tools tolerance and matching required level

with Flooring etc. complete as per Architect concept and as per detailed by

Architect / consultant & Directed by EIC.

Providing and fixing standared extruded of alluminium section of size

x 38.10 x 1.95 mm @ Wt 1.094Kg / Rmt with colour anodized alluminium

frame with 5 mm thick transparent bronze colour tinted float glass with

55 colour anodized alluminium frame for ventilation with 5 mm thick frosted Smt 5.00 1,301.82

glass as details etc complete for.window

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth & Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on undecorated wall surface to

56 give an even shade including throughly brushing the surface free from Smt 2156.00 119.49

mortar droppings and other foreign matter and sand papered smooth.

ARCHITECT: ARG Creation Pvt. Ltd. 7 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Applying two coats of putty & two coats of primer of approved brand and

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter

and sand papered smooth & Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on undecorated Ceiling surface to

give an even shade including throughly brushing the surface free from

57 mortar droppings and other foreign matter and sand papered smooth. Smt 1431.00 122.67

Extra over item 57 for painting with plastic emulsion paint of approved

brand on ceilings and sloping roofs.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly brushing

58 the surface to remove all dirt, and remains of loose powdered materials.etc Smt 1634.00 114.53

Painting two coats (excluding priming coat) on new steel and other metal

surface with synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign

matter.Painting two coats (excluding priming coat) on new steel and other

metal surface with synthetic enamel paint, brushing to give an even shade

including cleaning the surface of all dirt, dust and other foreign matter.

Pro. And fixing single layer water proof gypsum board 12.5 mm thick

sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm

suspended by GI suspender channel of size 25 mm x 3 mm with

intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center

to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c

and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at

60 edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt Sqm 755.00 606.95

connecting cleat,joining compound top coat on ceiling incl.making

necy.opening for light fitting,diffuser etc. comp. as per detail drawing as

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround, square

61 or round bars with round headed bolts and nuts or by screws (A) Plain Grill. Kg 4784.00 114.44

Providing, fabricating and fixing STAINLESS STEEL RAILING OF AISI-304 grade

using 50mm dia Stainless Steel pipe of 16 gauge, 3 nos. 16mm dia SS pipe

of 16 gauge, round balustrade of 38mm [50mm 16G Grade 304 with glossy

finish consisting of 38 NB or nearest size vertical posts 900 Height at

maximum spacing 900c/c with suitable cups at bottom and top rail of 50 NB

or nearest size & intermediate rails of 20 NB or nearest size etc complete]

with complete assembly of SS studs to house the horizontal 16mm pipes and

top handrail, bend and coupler to be used as per architectural detail

drawings for the railing in parapet, stair etc. including fabricating, hoisting,

62 fixing in position with angle cleats, holdfast etc. in RCC or masonry in true Rmt 56.00 3,563.68

line level and plumb, including complete assembly, including matt polishing

and buffing complete, including scaffolding etc. complete as directed by

EIC.(Actual length of stair railing shall be measured at site & same shall be

paid. No wastage should be measured or paid.)

Providing and fixing in position S.S. daso by providing top 50 mm dia stain

less steel pipe rail with starting and end point vertical post of 50 mm dia

with wall/column including bending welding and fixing for staircase and

balcony as directed.(testing is required of s.s 304) for all floor.

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted or

welded in builtup for all type sections, in framed work, including cutting,

hoisting, fixing in position and applying a priming coat of approved steel

primer all complete as per the structural designs and directions of Engineer

in charge.Column ( 122 x 61 x 3.6mm )

ARCHITECT: ARG Creation Pvt. Ltd. 8 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and laying broken chine mosaic flooring for terrace using 12 mm

to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

65 using white cement including rounding off junctions and extending them Smt 743.00 747.29

upto 15 cm along the wall,clearing with water and oxalic acid etc. as

Water proofing-Providing and applying primer + 2 coats of Single

component, high solids, cold applied liquid polyurethane elastomer

waterproof membrane (ELASTOROOF PU– Sunanda speciality pvt coating ltd

or Equivalent) over uniform surface of slab. Apply 2 coats at dosage of

kgs per sqm to achieve the required minimum DFT of 1.5mm. It should

following properties :-

1. Total Solids % 95 ± 5%

2. Specific Gravity 1.30 ±

66 3. Elongation % ≥ 700% Smt 743.00 979.14

4. Dosage 1.2 - 1.5 kg/m2 in two coats

5. Tack Free Time 24 - 48 hrs

6. Tensile Strength N/mm² ≥

7. Low Temperature Crack Bridging No crack

8. DFT 1.2 - 1.5 mm on smooth, non- absorbent surface

9. Shore Hardness 40 ±

10. Conformance Conforms to ASTM C

Providing & Laying M250 grade concrete trimix using P21 (water reducing

concrete admixture at 100 ml per bag of cement & recon 3 s fiber at 125 gm

per bag of cement including carrying out vaccum dewatering and power

floater treatment in floors well compacted mechanically vibrated finish to

require levels making C channel 75 x 75 mm required to maintain level

67 slope and thickness of the concrete road leveling of placed concrete with Cmt 196.00 8,452.79

surface vibrator and finishing with power floater & trowel light brooming the

surface & including cutting & filling of expansion joint as directed by

Engineer in charge

Providing and laying 40 mm thick Cobble Stone, hand cut and chiseled

dressed on top of required or detailed sized and design and color in flooring

of Approved Quality with Cement colour mixed pigment grouted flooring

pavement As per Architectural Concept & Design Incl. laid on a bed of

mm thick cement mortar 1 : 6 (1 - cement : 6 - coarse sand) finishing with

including grouting the joints with epoxy, polymer & white cement &

68 matching pigments etc., complete. [a] Spacer tape 6.4 mm thick x 4 mm to 6 Smt 674.00 2,050.00

mm as per detailed groove, etc. complete as per approved pattern and

detailed drawing by Architect at all level. and as directed by E.I.C.

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length,30cm height and 15cm thick of M250 grade

concret as per approved design and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc

Supplying and fixing reinforced concrete heavy duty non pressure pipes with

collars for culverts carrying heavy traffic as per IS 458-1991 specifications

including setting the pipes in C.M. 1:2 watering and laying (to level or

slopes) of class NP3 of following internal daimeters.(i) 300mm dia.

Providing and fixing Directional and Informative Signages- SS Plate, Grade

304, Brush finish, 2mm Thickness with smoothen corner edges, Acid etching

71 with duco color, SS studs 1.5' away from wall.fitting as per dirction of Smt 22.00 92,433.18

Architect and EIC

Providing and fixing 12' height, 1.5" EMBOSSED Mat / polished / colored SS

LETTERS MADE FROM 1mm thick 304 quality SS sheet cut outs on front Per

72 surface, 0.5mm thick Mat / polished / colored 304 quality Sheet for emboss word 40.00 1,616.00

ARCHITECT: ARG Creation Pvt. Ltd. 9 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

LAYING OUT LAWN – After excavating soil upto 30 cm. depth & removing

unwanted stuff, stones etc. Preparing soil for planting by supplying and

mixing 6 inch river fine site and 0.5 cmt FYM maximum 100 sqmt of lawn

area and doing termicide @ 1 fit / 100 sqmt area and planting selection

73 type / approved lawn grass at maximum 6 cm x 6 cm distance and maintain Smt. 1814.00 76.65

it upto 120 days. Maintainance include all operations i.e. watering, grass

cutting, gap filling, applying of fertizer if require etc.

Supplying, Spreading and leveling of good earth like firtile soil as directed

74 etc comp Cmt 545.00 405.81

Supplying, Spreading and leveling of good quality river Kap Filling 100 mm

75 as directed etc comp. Cmt 545.00 405.81

Supply and Planting saplings of Hedge plants like kadvi mahendi, karmda,

dyuranta, nikodeviya etc. specifies bag size is 4 inch x 6 inch, well

76 established & free from disease at site. as per the instructions Nos. 1000.00 50.86

Providing & Laying & jointing in true line level U.P.V.C. SWR type B pipe

confirming to IS 13592-1992 with one end plain & other end socket with

rubbering & Fixing conforming to ISI 14735-1999 of approved make for

drain system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

dia x 210mm length x 196mm high at every 2000mm centre to centre or

shall be concealed in wall as directed necessary fittings such as bends,

77 shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent, Rmt 50.00 831.22

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC. (A) 160mm dia. etc. complete as per

detailed, directed & approved by the consultant / EIC.

Providing & Laying & jointing in true line level 110mm dia U.P.V.C. SWR type

B pipe confirming to IS 13592-1992 with one end plain & other end socket

with rubbering & Fixing conforming to ISI 14735-1999 of approved make for

drain system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using PVC clamps of the size 160mm

dia x 210mm length x 196mm high at every 2000mm centre to centre or

78 shall be concealed in wall as directed necessary fittings such as bends, Rmt 50.00 835.15

shoes, etc. incl. testing of pipe & joint & jointed with adhesive solvent,

cement incl. cost of all material etc. complete as per detailed, directed &

approved by the consultant / EIC.

Providing laying and jointing in true line and level 75mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

ARCHITECT: ARG Creation Pvt. Ltd. 10 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe (

SCH- 40) for cold water including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the help of clamp at every two

metre C/C or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing & Fixing gun metal check or no return full way wheel valve etc.

84 complete as per the instruction of EIC. (C) 25 mm. Dia Each. 8.00 420.63

Providing & Fixing gun metal check or no return full way wheel valve etc.

85 complete as per the instruction of EIC. (E) 40 mm. Dia Each. 4.50 663.43

Providing and fixing screw down bib taps of following size.(A) Brass screw

86 down bib tap polished bright. (i) 15mm dia. Each. 10.00 184.98

Providing and fixing brass screw down stop tap.(C) 25mm dia.

Providing & Fixing PVC SWR Nahni trap IS 14735 for drain- 100mm diameter

with 150 mm X 150mm S.S.jali for floor or nahni trap of the following

nominal diameter of self cleansing design with C.I screed down or hinged

88 grating including the cost of cutting & making good the walls, as per Each. 15.00 525.83

detailed, directed & approved by the EIC.

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber

and water tight C.I. cover with frame of 300mm x 300mm size (inside) with

89 standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. Each. 5.00 1,279.40

Constructing brick masonry chamber for underground C.I. Inspection

chamber & bends with bricks having crushing strength not less than 35Kg.

Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal

dimensions, total weight of cover with frame to be not less than 38Kg. (Wt.

of cover 23 Kg.) & Wt. of frame 15Kg. ) (R.C.C. top slab with 1:2:4 mix (1-

cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls & bed concrete for (i)

Inside dimensions 455mmx 610mm & 450mm deep for single pipe line. etc.

complete as per detailed, directed & approved by the consultant / EIC.

Constructing brick masonry manhole with R.c.c. top slab in 1:2:4 mix (

cement : 2 coarse sand :4 grade stone aggregate 20mm size ) foundation

concrete 1:3:6 mix ( 1 cement : 3 coarse sand :6 brick bats 40 mm size )

inside plaster 15mm thick with CM 1:5 ( 1 cement : 5 Coarse sand ) finished

with a floating coat of neat cement & making channels in cement 1:2:4 mix (

1 cement : 2 coarse sand :4 stone aggregate 20mm nominal size ) finished

smooth complete including curing & testing… ( I ) inside 900mm x 1200 mm

& 1.5 m deep including R.c.c. cover with frame size 560 mm diameter ( A )

91 with 230mm thick walls of brick masonry using brick having crushing

strength not less then 35 kg/sqcm in CM 1 : 5 ( 1 cement : 5 coarse sand ),

(2) B type depth 1.50 Meter for 150mm diameter sewer.. etc. complete as

per detailed, directed & approved by the consultant / EIC.

ARCHITECT: ARG Creation Pvt. Ltd. 11 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & Fixing white colour, Vitreous china, under / Over Counter wash

basin with single hole for pillar type with Cl or MS brackets painted white

including cutting holes, ranking bolts for Fixing & marking good the same,

including Fixing C.P. Brass waste coupling 32mm dia & Bottal trap & 15mm

dia pillar tap, Bottle Trap, as approved, capstan head C.P. screwed down high

pressure with screw shank & back nuts & rubber plugs, 15mm dia brass stop

cock (50/75mm p.v.c. Drain connection pipe, Water Connection Pipe of

required Size, & testing the same for leak proof, etc. with all material &

labours to complete this job in all respected manners, etc. complete as per

detailed & approved by the consultant & directed by EIC.

Providing and fixing wash down water closet (European type, W.C. Pan) with

integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1 - Cement : 1 - Fine Sand) with plastic seat and cover for wash

down water closer with C.P. brass hinges, C.P. brass toilet paper holder, Jet

93 Spray, Health Fauset Heavy duty with hook with fitting, Metropole, Incl. Each. 4.00 5,965.72

Connection and rubber buffers. (A) Vitreous China., etc. complete as per

detailed & approved by the consultant & directed by EIC.

Providing & Fixing 600mm x 450mm beveled edge mirror of superior glass

mounted on 6mm thick A.C. sheet or plywood sheet & Fixing to wooden

plugs with C.P. brass screws & washers, etc. with all material & labours to

94 complete this job in all respected manners, etc. complete as per detailed & Each. 4.00 833.73

approved by the consultant & directed by EIC

Providing & Fixing pillar tap, screw down high pressure with screws, shanks

95 & back nuts. (i) 15mm dia. Each. 4.00 308.73

Providing and fixing Kitchen / Laboratary sink with C.I. or M.S. brackets,

96 painted white including cutting holes in walls and making good the same but Each. 1.00 2,280.27

excluding fittings.

Providing erecting and fixing double coated ISI water tank of required

97 capacity each with all necessary fittings and connection etc. complete on Ltr. 25000.00 3.95

Lowering of Submersible pump set complete with required nos and size of

Column pipe ( GI / HDPE pipe) erected by means of proper chain pulley block

& pipe wrenches after checking of threads of each pipe with coupling to take

98 the load of the pump set and pipe assembly filled up with water with trail Job 1.00 2,932.79

testing, wiring GEB test report.

Single phase submersible pump motor set with control panel. (c) Motor

99 rating 2 HP (17 stage) pump having capacity of 106 LPM at 40 mtr head Set 1.00 21,694.80

suitable for 32 mm dia. delivery pipe, Cat Q- II

100 Flat PVC cable size 4.0 sq.mm Mts. 150.00 85.85

101 HDPE pipe - 40 mm dia. Mts. 150.00 126.25

Providing and fixing in position U.P.V.C. cowl went to pipes. (C) 100mm dia

Providing & Fixing handicap toilet set with Wall-mounted European Closet &

wash basin & all handicap requirement with dual flush tank, seat & lead

(heavy duty) including C.I. Brackets, C.P. brass hinges, M.S. / C.I. painted

brackets, Waste Coupling, 32mm size bottle trap etc. all Internal fittings

complete with grab rails etc. rubber buffers, C.P nuts, bolts etc making holes

in walls & floors, & finishing for ready to use. The rate includes all necessary

connection charges as per product detail to the satisfaction of Architect /

103 engr. in-charge where required & the final handing over etc. complete as per Each. 1.00 53,418.90

specifications, drawings & as directed by the Engineer-in-charge. The scope

includes following items: EWC with seat cover & dual flush tank & WASH

BASIN SET: - CERA 'CRUSE SET' as approved by Architect / consultant &

Directed by EIC.

ARCHITECT: ARG Creation Pvt. Ltd. 12 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing Septic Tank of 10.00 mt x 4.00 mt x2.00 mt size for Sewerage

including excavation with any strata up to four meter depth,PCC in Bottom

Slab 1:3:6,Brick Work in cement mortar 1:5, RCC M200 Slab on Top And

bottom, required filling for Tank including making Required line for water

inlet, precast RCC M.200 Frame & cover etc.as directed by engineer in

charge. etc complete, septic tank as per detailed drawing.

Providing sock pit of 2.5 Mtr. Internal dia. and 5 mtr Depth internal clear

dimention including the cost of excavation, P.C.C. 1:4:8 and filling brickbats

with dry masonry work, Honeycomb masonary work, M:200 RCC. SLab incl.

form work including FE-500 Reinforcemnt, M.S.cover, C.I. Pipe & cowl vent,

vatas in C.M. 1:3 with finishing curing etc. complete as directed.. etc.

complete as per detailed, directed & approved by the consultant / EIC

Cleansing Site including the uprooting of rank vegetation, grass, brush

wood, trees and saplings of girth up to 30 cm measured at a height of 1 m

106 above ground level and removal of rubbish up to a distance of 50 m outside Smt 173.80 55.00

the periphery of the area cleared.

Providing and applying LIME BASED CHEMICAL WATERPROOFING TREATMENT

on the sunk area,wall area, and celling area including roughing cleaning the

surface after applying internal waterproofing 2 coats of KRISHNA CONCARE

Latex Water Resistant Bonding Agent Spread primer by using KRISHNA

CONCARE Latex in Water = 1: 4 by volume to obtain a thin layer. applying

107 coat for waterproofing on structures to prevent water infiltration and Smt 612.15 650.00

dampness. including curing at with specified period as directed etc.

complete as directed by EIC.

Cleaning of entire inside and outside of building as per given remedies and

specification from Architect / Engineer in-charge firstly to remove all kinds

of algae/fungus/dust, dirt, or loose materials contaminants liatance etc with

Dry cleaning and water jet cleaning. After cleaning the entire outside surface

and weedification treatment applying two coat of unit bio- wash

108 concentrated coating for all roots of algae, fungus, lichens, mosses and big Smt 1224.30 450.00

plants etc. complete as required by site conditions and Architect / Engineer

in-charge approval.

Opening and repairing of all types of cracks in a "V" groove manner and

grout lime mortar in crack's cavity portion on an interval of 2-3 days plus on

some equal interval put a big size of stone clipping after which the top

109 surface of crack shall be repaired with traditional lime mortar etc. complete Rmt 74.20 1,500.00

as required by site conditions and Architect / Engineer in-charge approval.

Providing & fixing at New construction and Restoration of solid stone work,

Detection, part removal and repair of all eroded solid stone work on

parapets, columns, plinth, grills, lintel etc., including part cutting, including

new stone piece to match original design and finish, in line and level,

including refilling all joints in traditional lime mortar 1:2 etc. complete as

required by site conditions and Architect / Engineer in-charge approval.

Restoration of stone / Brick and plaster surfaces, Restore all surfaces of all

eroded stone members, over and above mentioned before including

application of bond coat followed by consolidate surface and adhesion

111 promoter for subtracts etc. complete as required by site conditions and Smt 100.00 825.00

Architect / Engineer in-charge approval.

ARCHITECT: ARG Creation Pvt. Ltd. 13 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Restoring and repairing simple or ornamental plaster of front façade,

cornice, flower pattern, geometric pattern, Applying traditional lime plaster

on all surfaces, in proportion of 1:3 (lime: sand) with traditional method like

sieving, slaking, crushing and knocking etc and also use of only natural

additives in lime mortar, using approved quality lime cured as per standards,

112 to match with existing quality of mortar and plaster, applied and cured as Smt 100.00 2,250.00

per standards as required by site conditions and Architect / Engineer in-

charge approval.

Applying traditional araise plaster (rough and smooth texture both)on thappi

lime plaster on all surfaces, with traditional method like sieving, slaking,

crushing and knocking etc and also use of only natural additives in lime

mortar, using approved quality lime cured as per standards, to match with

existing quality of mortar and plaster, applied and cured as per standards as

required by site conditions and Architect / Engineer in-charge approval.

Dampness treatment, Fixing & grouting 10-12mm dia nozzles in to the

drilled hole and place the nozzle in such a way with distance of 12" inch

from each other, and Seal the nozzle with suitable material and allow it to set

at least for the day before grouting, Grouting should be carried out by the

means of hand pump sufficient enough to create pressure of approx..2kg to

4kg must, inject silicon (Liquid and powder form both) injection grout

114 through pressure grouting machine, with the mixing proportion of 1:10 ( Rmt 112.50 1,450.00

one liter material & ten liter of water) etc. complete as required by site

conditions and Architect / Engineer in-charge approval.

Removing old detoriated plaster,wll tiles,paints,cement joints and unwanted

parts from entire building's inside-outside surface and staking away debris

115 from site etc complete as required by site condition and architect/engeineer Smt 412.50 85.00

in-charge approval

As per architect instruction and remedies applying strengthning stages for

the weak part of the building like walls,slab, and each and every weak parts

116 etc. complete as required by site conditions and Architect / Engineer in- Smt 100.00 350.00

charge approval.

providing and applying 6 stage treatment of strengthning and face lifting for

out side entire wall include 1St Stage cleaning the surface with brush for and

in 2 nd stage cleaning the surface with water's noramal pressure. After that

in 3 rd stage apply a sealer coat which seal porosity and crevices and give

excellent adhesion of over coated treatment along with consolidation of the

substract and in 4 th stage apply a sleekcoat for Avoding further erosion

abrasion,and to level the substract , and for 5 th stage again apply the sealer

coat to strengthen the base then after 6 th stage apply a two coats of

117 duraflex in red shed.this coating is U.V Stable water tight, weather durable,

dust repellant, with excellent architectural appearance and prevent growth of

fungus, algae, & moss etc. complete as required by site conditions and

Architect / Engineer in-charge approval.

Protective coating of all interior and exterior surfaces, including those

restored and cleaned, for protection against all weather conditions, with

prior approval of architect / engineer in-charge, inclusive of 1 years

118 performance guarantee etc. complete as required by site conditions and Smt 1237.50 550.00

Architect / Engineer in-charge approval.

Applying paint remover or grinding on painting surface and removing all

119 kind of paints on wooden,steel,and stone surface Smt 50.00 350.00

ARCHITECT: ARG Creation Pvt. Ltd. 14 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing, supplying, fixing, fabricating, erecting, aligning the structural

steel like pivot, tubular 'T', 'I" section, angle, plate, beam, channel section,

Bar, hollow box or Z purloins, Round or Square Pipes, of TATA or approved

make, for built up purloins, roof trusses, columns, side runners, tie beams,

sag rods, base plates gusset plates, cap plates, bearing bracing, gantry

girders, rails, require support, pipes, including all welded or bolted steel

structures of various types with approved I.S.I. mark electrodes, bolts,

anchor bolts including cost of thread, Anchor plate cleats etc. in RCC or

masonry work, including cutting, bending, welding, fixing, supplying,

Fabricating Decorative fevisted section or any structured member required to

complete the job for Bridge, Trusses, Canopy, doors, Frame, Railing,

120 Entrance gate, pergola, Decorative hanging light, New window, parking shed Kg 300.00 150.00

or space frame or any other required specified area as shown on drawing

and detailed specification or as per design incl. three coats of approved

brand primer and two coats of paints, necessary scaffolding, tools tolerance

etc. complete as directed by Engineer-In-Charge. (payment will be made for

weight of metal used in the work)

Restore and conservation of old wall painting near as per artist instruction

Supply, Installation, Loading/Unloading of following Items: VRF Outdoor

122 Units :- 14 HP Outdoor Unit (Top Throw) Nos. 1.00 252,205.00

Supply, Installation, Loading/Unloading of following Items: VRF Outdoor

123 Units :- 16 HP Outdoor Unit (Top Throw) Nos. 4.00 269,148.00

VRF Indoor Units :- 4 Way Cassette Type(Regular) (With Drain Pump) - 1.5 Tr

VRF Indoor Units :- 4 Way Cassette Type(Regular) (With Drain Pump) - 2.5 Tr

VRF Indoor Units : 4 Way Cassette Type(Regular) (With Drain Pump) - 3 Tr

VRF Indoor Units : 4 Way Cassette Type(Regular) (With Drain Pump) - 4 Tr

128 VRF Accessories :- Pannel (4 Way Cassette) Nos. 21.00 9,992.00

129 VRF Accessories :- Central Controller (Touch Screen) Nos. 1.00 63,300.00

130 VRF Accessories :- Wireless Remote Nos. 21.00 1,743.00

131 VRF Accessories :- Twinning Kit (2 ODU) Nos. 1.00 7,273.00

132 VRF Accessories :- Twinning Kit (3 ODU) Nos. 1.00 8,548.00

133 VRF Accessories :- Separation Tubes Nos. 18.00 3,500.00

Supply & Installation of Haevy guage VRF Copper piping: Seamless heavy

gauge VRF Copper piping of following size duly insulated with 13 mm/

19mm thk. Nitrile Rubber Insulation. Piping inside building to be supported

134 with Sprinkler type U-Clamps embeded with black rupper. Piping in exposed RMT 330.00 3,300.00

area to be taken in GI Cable Tray with GI Cover for Protection.

Supply & Installation of Haevy guage VRF Copper piping: Cable Tray With GI

135 Cover for Exposed piping (200mm*150mm) RMT 20.00 1,600.00

Supply, installation, testing and commissioning of control cum transmission

wiring of 2 core x 1.5 sqmm copper sealded cable in suitable PVC

136 conduits between indoor and out door unit & outdoor units to central RMT 719.00 350.00

remotes controllers.

PVC Drain piping for the units with 6/9 mm thick nitrile rubber insulation

137 clamped as per specifications. RMT 147.00 210.00

138 MS Stand for Top Throw ODU (Epoxy Coated, Black Painted) Nos. 5.00 6,750.00

139 Lifting/Shifting & Placement of Heavy Equipments. Nos. 7.00 3,500.00

Testing & Commissioning charges along with topping-up of refrigerant as

140 per specifications. Lot 1.00 140,400.00

141 Brick wall Chiselling (Jari) Work RFT 50.00 120.00

142 Core Cut (Upto 4 In) Nos 15.00 1,500.00

143 DX-Split unit :1.9 Tr 3 Star Non Inverter New Nos 14.00 46,603.00

ARCHITECT: ARG Creation Pvt. Ltd. 15 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply & Installation of Haevy guage NON-VRF Copper piping: Seamless

heavy gauge Copper piping of ollowing size duly insulated with 6 mm thk.

Nitrile Rubber Insulation. Piping inside building to be upported with U-

144 Clamps. Piping in exposed area to be taken in GI Cable Tray with GI Cover RFT 672.00 450.00

for Protection. Upto 2 TR DX Units

Supply,installation,testing and commissioning of control cum transmission

145 wiring of 4 core x 1.5 sqmm copper cable in suitable PVC conduits between RFT 739.00 85.00

indoor and out door unit.

PVC Drain piping for the units with 6 mm thick nitrile rubber insulation

146 clamped as per specifications. RFT 364.00 75.00

147 L-Bracket / Base Stand for ODU (Upto 1.5 Tr Units) Nos. 14.00 1,400.00

148 Nitrogen Flushing & Pressure testing Nos. 14.00 1,000.00

Point wiring in Copper (Modular)--Point wiring for Light / Bell with 2-1.5

sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multistrand copper wires, in following type of pipe

to be erected concealed in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic box, single mounting base frame

covered with textured/metallic front plate modules erected on / in wall /

ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.--(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected concealed

in / flushed on wall/ceiling, complete with earth continuity and necessary

connection with primary light with accessories erected on Metal / PVC box

covered with 3 mm thick PC(Polycarbonet) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector

as directed.--Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.--(f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed in / flushed on

wall/ceiling complete with 6A Modular type switch and hum free EME four or

more step type electronic fan regulator with separately mounted and

accessories with earth continuity of following type erected on PVC / Metallic

box, single mounting base frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary

ceiling rose / H.D.Connector as directed--(f) with medium class Rigid PVC

pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe

152 erected with following type of accessories.--[I] For 6A Plug and 6 a switch Pt. 60.00 553.00

with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board--(f)

with medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete. Cat. III

ARCHITECT: ARG Creation Pvt. Ltd. 16 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected complete with Modular

type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling as per pipe

153 erected with following type of accessories.--[II] For 16A Plug and 16 amp Pt. 20.00 505.00

switch with 2-2.5 sq.mm Cu. Wire from mcb db board.--(f) with medium

class Rigid PVC pipe and accessories erected concealed in wall/ceiling

complete. CAT III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic box, single mounting base frame covered with

textured / metallic front plate modules erected on / in wall / ceiling with

following type accessories.--Single mounting base-frame & Textured /

Metallic front plates. Cat-III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

insulated multistrand copper wires, in following type of pipe to be erected

concealed in / flushed on wall/ceiling ,complete with 6A Modular type

switches and following type of accessories erected on PVC / Metallic box,

single mounting base frame covered with textured / metallic front plate

155 modules erected on / in wall / ceiling as per pipe erected. with necessary Pt. 15.00 653.00

batten/angle holder or ceiling rose or H.D.Connector as directed.--(f) with

medium class Rigid PVC pipe and accessories erected concealed in

wall/ceiling complete. Cat-III

Providing following type of Modular Type Accessories mounted with pvc /

metallic box, single mounting base frame covered with textured / metallic

front plate , modules erected with necessary connection. As desired by

Engineer In charge

(7) Blank Plate Single Cat-III

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed--b) 25 mm

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of

158 coupling, PVC bushes, Check-nuts etc. complete of following sizes. (2) 25 Mtr. 150.00 21.00

Mains & Wires--Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor

159 FRLS PVC insulated stranded wire of green colour for earth continuity of Mtr. 450.00 62.00

following size (a) with medium class Rigid PVC pipe and accessories--(a)

wire 1.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected concealed in /flushed

on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (general

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm (FRLS)

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

161 green colour for earth continuity of following size (FRLS) (a) with medium Mtr. 500.00 111.00

class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables --(G) 3 1/2 core

Sq. mm ( 70 Sq. mm 1/2 core)

ARCHITECT: ARG Creation Pvt. Ltd. 17 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

163 or in existing trench / pipe of following size of cables --(F) 3 1/2 core 120 Mtr. 75.00 535.00

Sq. mm (70 Sq. mm 1/2 core)

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or

164 in existing trench / pipe at road crossing or floor of following size of Mtr. 225.00 285.00

cable. (B) 3 core 4 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand /

Solid Copper conductor for 1.1 KV. to be laid on wall with necessary

165 clamps or in existing trench / pipe at road crossing or floor of following Ea. 50.00 361.00

size of cables. (B) 4 core 4 Sq. mm

Providing and, fixing heavy duty flange type brass cable gland with rubber

ring for PVC insulated armoured cable complete with out going tails,

166 insulating tape etc for following size of cables. --(A) 2 to 4 core 2.5 / 4 Sq. Ea. 52.00 33.00

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with

167 out going tails, insulating tape etc for following size of cables. (E) 3 core 120 Ea. 8.00 139.00

Providing and, fixing heavy duty flange type brass double compression type

cable gland with rubber ring for PVC insulated armoured cable complete with

168 out going tails, insulating tape etc for following size of cables. (F) 3 core 150 Ea. 4.00 189.00

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner. (A) 1.5/ 2.5/4/6 Sq.mm

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner.(E) 70 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner.(G) 120 Sq.mm.

Solder less crimping type Aluminium lugs conforming to IS suitable for cable

of following size evenly crimped with high pressure tool & connected to

switchgear terminals with brass/cadmium plated nut bolts in an approved

manner.(H) 150 Sq.mm.

Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V

A.C. system and having breaking capacity 10 KA to be erected in existing

173 box. confirming to IS 8828/1996 with ISI Mark(QTY FOR MCB OF DB AND Ea. 51.00 111.00

MCB OF PANEL) Cat-III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

174 having following capacity. Ea. 5.00 662.00

(B) 40 Amp. Cat III

Providing and erecting Sheet Steel powder coated MCB distribution board -

flush / surface mounted fitted with busbar, neutral link, earth bar and DIN

rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of same company of MCB

175 to be used) suitable for-- Ea. 9.00 2,885.00

(B) three phase incoming and single phase horizontal type outgoing Per

phase isolation type (PPI)--(b) sheet steel double door (IP-43) (ii) 6 way

ARCHITECT: ARG Creation Pvt. Ltd. 18 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable

for operation on single phase 240 V. having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic

component.for following Max. rating erected as directed

(i) 25 Amps. DP Cat-III

Providing and erecting MAIN LT PANEL

• Incoming : 250 amps FP MCCB (35 KA) with following accessories: 1 Set

ACB ON / OFF / TRIP indicating lights with control MCB’s. Under voltage

release 3 Nos. of 0-1000/ 5 amps CTR digital VAF with 3 nos 250/ 5 amps,

15 VA Class 0.5 CT’s. Digital type 0-500 Volt digital voltmeter with inbuilt

selector switch & shall be protected by 2 amp TP MCB’s--Bus Bars 300amps

FP aluminium bus bars with coloured heat shrinkable insulated sleeve.

177 • Outgoing All the outgoing should be provided with RYB - On - Off - Trip Ea. 1.00 250,000.00

I/L . (For MCCB only)

- 200A FP MCCB TH BASED :-1 No - 200 A FP ATS - 1 No

- - 40A FP MCB: 9 Nos.

- 20A DP MCB: 1 Nos.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

178 (fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Ea. 100.00 1,777.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent

cover fixed to housing complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

179 (fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Ea. 25.00 607.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with translucent

cover fixed to housing complete.IP20 ((iii) 12-15 watts, 6" x 6", Surge-2 KV

ARCHITECT: ARG Creation Pvt. Ltd. 19 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

180 LED driver efficiency > 85 % Ea. 150.00 1,354.00

(fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

((F) Spot Light 425 Lumens, Surge-2KV (ii) 8 to 11 Watts cat-iii

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name --

160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %--(

181 fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have Ea. 4.00 309.00

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(H) Mirror Light 9 Watts, wall mounted minimum 1 feet long

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to

0.5 Watt assembled on single MCPCB, with housing used as a heat sink shall

be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with company mark/name --

160V to 270V,Power Factor more than 0.95, THD < 15 %, CCT 3000 K to

6500K, Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85 %--(

fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have

182 shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.)

(D) LED Strip Light (i) Minimum 4.8W-120 LED per meter (2 wire, IP-65) with

non integral suitable Driver complete Cat-lll

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3blades with aluminium blades with , canopy &

183 cm. down rod erected with earthing.(Make shall be approved by Engineer in EA. 20.00 2,275.00

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to

the RCC bars up to 50mm length each side and pierced through a 16 Gauge

184 M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with EA. 20.00 125.00

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan

Supplying & erecting approved make low noise decorative exhaust fan having

square frame ABS body with inbuilt lowers & square frame. 200mm with

1350RPM. Cat-II

ARCHITECT: ARG Creation Pvt. Ltd. 20 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting approved make Octagonal pole made from HR sheet

steel. The pole should be made as per IS. and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed

with integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type

terminal and arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer considering site

requirement.(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole weight 46 kg

Supplying and erecting LED street light / Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio

>0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

188 fittings required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge may

select any wattage capacity between the ranges shown.) (iii) Above 60 to

Providing & erecting approved make street light / wall mounting junction

box compression moulded from SMC (thermoset plastic) vertical sliding

cover having locking with square head stud loop in / loop out in built

189 terminal suitable for four core cable, waterproof of I.P. 54 protected with EA. 40.00 353.00

clamp or bolt nut & earth bolt of following size. (A) 200mm x 127mm x

Supply & fixing decorative Hanging light with glass having cylindrical or

square shape having length not less than 10" & width not less 3.5" with

holder, lead wire as per required length but not more than 1mm & base plate

for fixing the fitting with ceiling.[a] suitable for led lamp Cat-III

Supplying and erecting LED Spike Outdoor fittings with LEDs of wattage 7W.

Providing and erecting required size HOT deep Galvanised iron strip for

192 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using Kg. 10.00 77.00

Providing and erecting HOT deep Galvanised iron strip wire 8 to

193 SWG.Using for DB earthing wire 8 to 16 SWG. Kg. 20.00 77.00

Supplying & erecting in earthpit of minimum bore dia. 225mm size ASH or

approved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe dia

of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm

having 200-250 Micron galvanising, connection terminal dia of 14 mm

with constant ohmic value surrounded by highly conductive compound with

high charge dissipation suitable for panel earthing.[A] For electrical

installation up to 440 V

194 [C] For Electrical Installation covering Transformer Neutrals, Lightning

arrester Earthing, A.C.Plant & Sensitive Computer System (like Automation,

SCADA) i.e independent Earthing in normal soil. Length of Pipe : 3 mtrs Back

filling Compound: 2 nos Bags of 25 Kg.

4/5/6 Passengers, Ground plus 1 upper floor with Rated Speed of

195 m/sec, (B) With General Specification attached herewith. Cat.III Ea. 1.00 968,452.00

ARCHITECT: ARG Creation Pvt. Ltd. 21 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supplying and erecting, commissioning and testing of Diesel Generating set

confirming to IS: 4722:1968 & BS:5514 having continuous rating, 3 phase,

415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water

cooled diesel engine with multi-cylinders developing suitable BHP not less

than following capacity at 1500 RPM with 10% overload for one hour in

hours with standard accessories like fly wheel, lubricating oil cooler, "A"

class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air

filler, lubricating oil pressure gauge, end exhaust manifold, standard set of

tools with adjustable spanners, screw drivers, cylinder head to cover, joint

cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric

starting equipment complete with standard heavy duty battery, dynamo, cut-

outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty

Residential type exhaust silencer and vertical hot air duct both logged with

asbestos rope, save oil trays, exhaust piping of required length, standard

wall/floor mounted fuel with level indicator and piping and drip proof

alternator, self excited, self regulated, screen protected, with excitation

system, capable of delivering the rated system output at 415 volts, 3 phase,

0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722-

196 with voltage regulation +/- 5% of rated voltage from no load to full load. set 1.00 1,382,776.00

Both the engine and alternator fitted on a common fabricated steel base

plate with antivibration mounting engine and alternator both connected to

each other by flexible flange coupling and with floor/wall mounted control

panel box comprising of voltmeter ammeter, selector switches, ACB /

MCCB / MCB of adequate capacity, indicator lamps duly wired with HRC

fuses. The alternator & control panel shall be connected with provided

suitable capacity armoured cable and complete with Acoustic enclosure

(canopy) made out of 16 SWG CRCA Sheet, sound absorbing material

Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of

40 Density - at least 40 mm. The resin bonded rockwool covered from inside

the canopy by perforated sheet with 3/4 mm holes, sound level not more

than 75 dB at a distance of 1 mtr, as per PVCT norms. Erection,

commissioning and satisfactory testing as per requirement with first filling of

fuel, oil, etc. with guarantee / Warrantee of complete system for Two years.

& with obtaining all necessary certificate from Electrical Inspector. The

Capacity and Ratings of DG sets are as below.(O) Continuous rating of

KVA ,BHP not less than 197 BHP

Providing & erecting approved make AMF control panel suitable for following

size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of

scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors (for

mains & generator) Overload relay for generator contactor Neutral

contactor for mains and generator Power socket for connections.

2) Control and metering module: Line voltage monitor. Generator voltage

monitor Ammeter 3 items attempt start facility. Air circuit

breakers/MCB/MCCB of suitable rating for auto/manual operation.

Auto/manual switch. Emergency stop push buttons. Manual start push

button. frequency meter. Engine hour meter. Two earthing studs.3)

197 Protection module: The engine shutdown in the unlikely event of Low lube oil Ea. 1.00 220,509.00

pressure High cylinder head temperature. V belt failure.

4) Indicators with alarm Load on generator.

5) Indicators Load on mains Engine fails to start . Emergency stop battery

The AMF Panel of following capacity (D) AMF Control Panel for 200 KVA/250

KVA3 phase DG Set

ARCHITECT: ARG Creation Pvt. Ltd. 22 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing & Erecting full SS Body (SS 304) Split type water cooler having

storage capacity 160 to 175 Ltr.(Tank SS 304) & Cooling capacity 150 ltr. Per

hour @ an ambient temp of 350 C.The outlet temp. of the water should drop

by 150C within a hour,The water cooler should be comprising of hermetically

sealed Reciprocating compressor with R134A, fan motor, Copper

Condensing unit with company fabricated Outdoor Unit water tank

surrounded by evaporating coil, thermostats, relay etc.complete with

necessary copper tube & Insulation, M.S Chanel Stand with Painting for water

tank & M.S. Powder Coated Stand for Outdoor unit with Installation. With

DPELCB and 4 Way DB Box with accessory Three core Cord for connection.

Liaisoning work for additional load for requirement, electrical power

199 connection charges and inspector approval for power(to be paid to concern - 1.00 25,000.00

electrical power supplier company)

PUMP Supplying, installation, testing and commissioning of electric driven

Main Fire Pump suitable for automatic operation and consisting of following,

complete in all respects, as required : (a) Horizontal type, multistage,

centrifugal, split casing pump of cast iron body & bronze impeller with

stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable

HP Squirrel cage induction motor, TEFC, synchronous speed

RPM, suitable for operation on 415 volts,

3 phase 50 Hz, AC supply with IP 55 protection for enclosure,

200 horizontal foot mounted type with Class-'F' insulation, conforming to IS-

325. (c) M.S. fabricated Common base plate, coupling, coupling guard,

foundation bolts etc. as required. (d) Suitable cement concrete

foundation duly plastered with anti vibration pads. 1.1 2850 lpm at 88 m

Supplying, installation, testing and commissioning of electric driven

pressurisation pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (Jockey Pump) Horizontal

type, multistage, centrifugal pump of cast iron body and bronze impeller

with stainless steel shaft, mechanical seal conforming to IS :

Suitable HP squirrel cage induction motor TEFC type suitable for operation

on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for

enclosure, horizontal foot mounted type with Class-'F' insulation,

201 conforming to IS : 325. M.S. fabricated Common base plate, coupling,

coupling guard, foundation bolts etc. as required. Suitable cement

concrete foundation duly plastered and with anti vibration pads. 3.1

lpm at 88 m Head.

Supplying, installation, testing and commissioning of diesel engine

driven main fire pump suitable for automatic operation and

consisting of following, complete in all respects, as required : (Diesel

Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron

body and bronze impeller with stainless steel shaft, mechanical seal

conforming to IS 1520. Suitable HP, 1500 RPM water cooled with

radiator, diesel engine conforming to relevant IS standard complete with

auto starting mechanism, 12 /24 volts electric starting equipment, diesel

tank, exhaust pipe extended upto 10 m outside pump house duly

insulated with 50 mm thick glass wool with 1.0 mm thick

aluminium sheet cladding, residential silencer, instruments and

protection as per standard specification, stop solenoid for auto stop

in the event of fault with audio indications, painted with post office

red colour etc. as required. M.S fabricated, common base plate,

coupling, coupling guard, foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with anti vibration

2.7 1620 lpm at 88 m Head

ARCHITECT: ARG Creation Pvt. Ltd. 23 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Fabrication, supply, Installation testing & commissioning of Electrical control

panel of cubical construction, floor mounted type, fabricated out of 2mm

thick CRCA sheet, compartmentalised with hinged lockable doors, dust

and vermin proof, powder coated of approved shade after 7 tank

treatment process, cable alley, interconnection with suitable size copper

conductor cable/solid copper strip, having switchgears and accessories,

mountings and internal wiring, earth terminals, numbering etc. complete

in all respect, suitable for main fire pump, pressurisation pump & diesel

pump set complete as per CPWD specification with following in coming and

outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac supply

with enclosure protection class IP 42 as required : 5.1 INCOMING - 400A,

203 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with No. 1.00 318,497.51

selector switch Digital Ammeter (0-400 A) with selector switch & CTs

etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating

lamps Set of Copper Bus Bar 300A. OUTGOING (Note : All outgoing

feeders for pumps should have digital Ammeter with selector switches and

LED type ON, OFF, trip indicating lamps)

204 Supply of 12 V Battery, Coolant, Engine Oil and Diesel Tank. Set 1.00 29,957.63

Supplying and fixing of Air Vessel made of 250mm dia., 8mm thick MS

sheet, 1200mm in height with air release valve on top and flanged

connection to riser, drain arrangement with 25mm dia. gun metal wheel

205 valve with required accessories, pressure guage and painting with No. 1.00 15,615.63

synthetic enamel paint of approved shade as required.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 200mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification.150 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification.100 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 80 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 50 mm dia.

ARCHITECT: ARG Creation Pvt. Ltd. 24 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 40 mm dia.

Supply, erection, testing and commissioning of heavy duty G.I. C Class

pipe line as per relevant IS along with fitting like sockets, bend,

elbows, tees, plugs, nipple, flanges, reducer etc. for pump room &

coat yellowxide, 2 coat PO red colour with painting of one coat of primer

and 2 or more coats of synthetic enamel paint of approved make /

shade complete as per specification. 25 mm dia.

Supplying, fixing, testing and commissioning of double flanged sluice

valve of rating PN 1.6 with non rising spindle, bronze / gun metal

seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming

to IS 780 of following sizes as required. 100mm

Supplying, fixing, testing and commissioning of double flanged sluice

valve of rating PN 1.6 with non rising spindle, bronze / gun metal

seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming

to IS 780 of following sizes as required. 80 mm dia.

Supplying, fixing, testing and commissioning of double flanged sluice

valve of rating PN 1.6 with non rising spindle, bronze / gun metal

seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming

to IS 780 of following sizes as required 150 mm dia.

Supplying, fixing, testing and commissioning of butterfly valve of rating

PN 1.6 with bronze / gun metal seat duly ISI marked complete with nuts,

216 bolts, washers, gaskets and conforming to IS 13095 of following sizes : No. 1.00 7,669.15

Supplying, fixing, testing and commissioning of butterfly valve of rating

PN 1.6 with bronze / gun metal seat duly ISI marked complete with nuts,

217 bolts, washers, gaskets and conforming to IS 13095 of following sizes : No. 1.00 5,706.50

Supplying, fixing, testing and commissioning of butterfly valve of rating

PN 1.6 with bronze / gun metal seat duly ISI marked complete with nuts,

218 bolts, washers, gaskets and conforming to IS 13095 of following sizes : No. 2.00 4,264.25

Providing, installation, testing and commissioning of non-return valve of

following sizes confirming to IS : 5312 complete with rubber gasket, G.I.

219 bolts, nuts, washers etc. as required : 150 mm dia. No. 1.00 15,223.61

Providing, installation, testing and commissioning of non-return valve of

following sizes confirming to IS : 5312 complete with rubber gasket, G.I.

220 bolts, nuts, washers etc. as required : 100 mm dia. No. 2.00 9,458.05

Providing, installation, testing and commissioning of non-return valve of

following sizes confirming to IS : 5312 complete with rubber gasket, G.I.

221 bolts, nuts, washers etc. as required : 80 mm dia. No. 2.00 6,582.98

Supply, Installation, Testing and Commissioning of Gun Metal Air

222 Release Valve with necessary fittings. Size: 25 mm dia. No. 6.00 1,069.91

Supply, Installation, Testing and Commissioning of 100 mm dia.

Pressure Gauge (for all pipes) of range 0 - 15 Kg/cm² conforming to IS -

3624 having bourdon tube of stainless steel 310 in cast aluminium,

stove enameled, black, weather proof case with outer, screwed

223 aluminium bezel and complete with necessary U-type stainless steel No. 2.00 1,198.30

siphon tube and cock including providing suitably painted angle iron

support to the tube etc. as per required.

ARCHITECT: ARG Creation Pvt. Ltd. 25 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

Providing and fixing of pressure switch in M.S. pipe line including

224 connection etc. as required. No. 2.00 1,323.27

Pump house Cabling : Providing, fixing, testing & commissioning of

225 Sq.mm. 3 Core Alluminium Armoured Cable of required size from Panel to Rmt 350.00 333.82

Providing, installation, testing & commissioning of Y Type Strainer

226 fabricated out of 1.6mm thick stainless steel, grade 304, sheet with 3 mm No. 3.00 9,538.51

dia. holes with stainless steel flange. 150mm

Supplying and fixing Single headed internal Fire Hydrant Valve with

instantaneous stainless steel coupling of 63mm dia. with cast iron wheel

227 ISI marked conforming to IS:5290 (Type-A) with blank cap and chain No. 4.00 5,254.57

Supplying and fixing of 63 mm dia. Gun metal short branch pipe with 20 mm

nominal internal diameter size nozzle conforming to IS 903, suitable for

228 instantaneous connection to inter connect hose pipe coupling as No. 4.00 2,067.93

required. Gun metal.

Supplying and fixing of 63 mm dia., 15 m long RRL hose pipe with 63 mm

dia. male and female coupling duly bound with G.I. wire, rivets etc.

229 conforming to IS 636 (Type-A) as required. Gun metal. No. 4.00 4,452.55

Supplying, Installation, Testing and Commissioning of Weather proof

Standard Fire Hose Cabinet wall mounting type (750 mm x 600 mm x

250 mm deep) having single or double opening with necessary locking

arrangement by allan key suitable for housing 2 nos. hose pipe, 1 no. branch

pipe & nozzle spanner.

Supplying and fixing of Fire brigade connection of cast iron body with

gun metal male instantaneous inlet couplings complete with cap and

231 chain as required for suitable dia. M.S. pipe connection conforming to Set 1.00 11,960.79

IS:904 as required : 4 way 150mm.

Supplying and fixing of Fire brigade connection of cast iron body with

gun metal male instantaneous inlet couplings complete with cap and

chain as required for suitable dia. M.S. pipe connection conforming to

IS:904 as required : 4 way 100mm dia.

Supply and fixing First Aid Hose Reel with M.S. construction spray painted

with P.O. red, conforming to IS:884 complete with the following as

required. 20mm nominal internal dia. water hose thermoplastic

(textile reinforced) type-2 as per IS:12585, 20mm nominal internal dia.

233 gun metal globe valve and nozzle, drum and brackets for fixing the No. 4.00 7,425.21

equipment on the wall. Connection from riser with 25mm dia. stop gun

metal valve & MS pipe and socket. 30 mtr.

FIRE DETECTION SYSTEMS :- Supply, installation and testing of

Addressable Powered loop Manual Call point with built-in Fault isolator,

234 housing & glass - red. Item as per drawing and specification, as No. 6.00 3,838.86

approved by Electrical Engineer in charge.

FIRE DETECTION SYSTEMS :- Supply, installation and testing of

Addressable Bus supplied Power Loop Sounder with built-in flasher,

8 Different Selectable Tones. Shall have a 'soft start' feature controlled

235 by the fire alarm panel. Item as per drawing and specification, as No. 6.00 4,040.00

approved by Electrical Engineer in charge.

FIRE DETECTION SYSTEMS :- Supply, installation, testing and

commissioning of Four Loop Addressable Intelligent Main Fire Alarm

control panel with operating front panel with network card, Keypad

300 characters & Multi lines alphanumeric display, 10,000 events memory,

On board Printer interface for external printer, battery backup. Item as

per drawing and specification, as approved by Electrical Engineer in charge.

Supplying and laying of 2 x 1.5 sq.mm fire alarm armoured cable

/ 1000 V rated with annealed copper conductor having XLPE insulation,

237 steel wire armouring & FRLS outer sheath complete as required. Rmt 1500.00 148.08

ARCHITECT: ARG Creation Pvt. Ltd. 26 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

FIRE DETECTION SYSTEMS :- Supply, installation, testing and

commissioning of Below False Ceiling Addressable ideal optical smoke

detector for detecting visible smoke particles with mounting base. Item as

per drawing and specification, as approved by Electrical Engineer in

Providing, fixing, testing & commissioning of 15mm dia. quartxoid bulb

239 type sprinklers of rating 68 degree centigrade with required accessories No. 70.00 446.79

: Pendent sprinkler.

Providing & fixing photo luminescent Signage's as per IS standard in Block /

Small Letters on rigid sheet with necessary wall or Ceiling fittings as

240 specified Sizes : For Fire Extinguisher, Exit, Do not to do etc. No. 60.00 226.83

Supply, installation, testing and commissioning of ABC type 6 kg.

241 confirm to IS:15683, with ISI marked / TAC approved fitted with No. 8.00 1,369.49

required accessories including wall suspension brackets.

FIRE EXTINGUISHER

Supply, installation, testing and commissioning of Carbon Dioxide (CO2)

type Fire Extinguisher of 4.5 kg confirm to IS:15683, with ISI marked / TAC

approved fitted with required accessories including wall suspension

Supply, installation, testing and commissioning of Modular ABC type 5 kg.

confirm to IS:15683, with ISI marked / TAC approved fitted with

243 required accessories including wall suspension brackets. No. 4.00 1,369.49

Supply, installation, testing and commissioning of Stainless Steel Ball

244 Valve. (a) 25mm dia. No. 8.00 1,155.51

Supplying, Installing, Testing & Commissioning of M.S. structural steel

245 support. Kg 350.00 81.32

Supply, Installing, Testing and Commissioning of C.I. heavy duty

foot valve with flanges, nut bolts, gaskets etc. with necessary complete

246 accessories. 150 mm dia. No. 1.00 14,122.88

Supply, Installing, Testing and Commissioning of C.I. heavy duty foot

247 valve with flanges, nut bolts, gaskets etc. with necessary complete No. 2.00 10,472.33

accessories. 100 mm dia.

Total Amount Rs. =

Total Amount Rs. =

Rupees Seven Crore Fourteen lakh Fourty Eight thousand Five hundred Ninety One and zero paisa.

I/We am/are willing to carry out the work @............ % above/below percent ( should be written in

figures & Words) of the estimated rates mentoined above . Amount of my/our tender work out as

Estimated amount put to tender Estimated amount put to tender

Deduct:……………………...….% below Add……………………..……..% above

ARCHITECT: ARG Creation Pvt. Ltd. 27 of

Sr. No. Description of Item Unit Quantity Total Amount

Sr. No. Description of Item Unit Quantity Total Amount

Rate In FIghure

IN words IN words

(Please strike out whichever is not applicable.)

The Contractor shall exhibit a board with detailed specification and details of work as directed by

1 the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where

there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Signature of Contractor with Seal Signature of Contracting Authority with Seal

ARCHITECT: ARG Creation Pvt. Ltd. 28 of