Fisheries- Neyyar fish seed farm Providing Lighting and aerator supply to Ornamental fish hub 7- 8

Amount

Fabricating, supplying, conveying, lifting and erecting SINGLE ARM tubular post of overall height of 7m using 6m 80mm and 1.50 m 50mm Heavy G.I. Pipe with suitable mounting for fixing led fitting having ISI mark and of approved quality as per the drawing, erected on a RCC 1:2:4 foundation in 3 Nos of well steining of 0.3m depth , 0.75m dia well steining with muffing of 0.45x0.45m with height 1.0 m. The post shall be erected on 4 numbers of 20 mm dia GI foundation bolts of length 2.0 m having 100mm long standard thread with a 20 mm thick GI flange suitable for 80mm C class pipe at the bottom of the post and 80 D flange on the muffing with 4 nos of 20mm bolt holes and 3Nos of 20mm nuts per bolt. The bottom of the post shall be provided with suitable size stiffner pieces.The post is to be painted with two coats of best quality industrial epoxy paint over two coats of industrial epoxy primer . Muffing to be plastered using cement mortar 1:4, 12mm thick colour washing 2 coats using approved colour etc. complete.All GI pipe sections to be used for the fabrication of the post shall be of TATA/ZENITH/APOLLO make.All steel items shall be dip galvanised.

Conveyance, installation, testing and commissioning of departmentally supplied flood light/ area light luminaire with lamp to a height upto 8m from ground level.

Wiring for light point/ fan point/ exhaust fan/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required(Group C)

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supply of following sizes of ISI marked medium class PVC conduit. 20 mm

Supply of following sizes of ISI marked medium class PVC conduit. 25 mm

Supply of following sizes of ISI marked medium class PVC specials. 20 mm pvc bend

Supply of following sizes of ISI marked medium class PVC specials. 25 mm pvc bend

Supply of following sizes of ISI marked medium class PVC specials. 20/25 mm pvc junction box 2 way

Supply of following sizes of ISI marked medium class PVC specials. 20 mm PVC Coupler

Supply of following sizes of ISI marked medium class PVC specials. 25 mm PVC Coupler

Laying and fixing of one number 20/25mm medium class PVC conduit on purlin of steel roof provided for fixing ridge sheet at a height upto 6m from floor level using 25 x 15 mm aluminum strip of thickness 3.15 mm bolted on steel tube using 6 x 25mm GI Bolt and nut with washer. The clamp shall be painted with two coats of matching colour enamel paint

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 1.5 sq. mm

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 x 2.5 sq. mm

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 3 X 4.0 sq. mm

Supplying and drawing following sizes of FR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 5 X 4 sq. mm

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supply and fixing brass batten / angle holder including connection etc as required

Supply and fixing 7/9 W LED lamp OSRAM / Philips or equivalent

Supplying 20 W LED BattenTube light fitting 1200 mm 6500K cool white light ,1800 lumen,RoHS Philips or equivalent

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 1 or 2 Module (75mm X 75mm)

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 3 Module (100mm X 75mm)

Supplying and fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 15/16 amp switch

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required.

Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete.

Supply of ceiling fans of 1400 mm sweep Category B Ceiling fan excluding resistance type regulator

Supply of SID or equivalent make Street light luminaire, 20W LED, IP66 optical & control gear compartment, die cast aluminium painted housing,anti UV Polycarbonate protector with in built lenses, with easily accessible control gear compartment, suitable for horizontal mounting (Ø32- 42mm), System power (including driver loss) of 20W with luminous efficacy > 105 Lumen/W at Ta 25⁰C. Lifetime residual flux @ Tq 35⁰C @ 50,000 hours = 70%, Ta = 50⁰C, in built surge protection of 4kV (in Differential and Common mode), Power Factor > 0.95, Colour Rendering Index > 70 and Cool white light (5700⁰K). Warranty: 5 year.

Supplying modular family street light luminaire KESElec City or equivalent 40W CW LED,an IP66 LEdSafe® optical compartment,a separate IP66 control gear compartment and extruded aluminium painted housing, a toughened glass protector,permanently sealed with a robotically dispensed silicone sealant,closed at one end by an end cover and the other end by a frame and door assembly (to access control gear) both made of injection moulded polycarbonate,a removable control gear plate,safety plug and socket system,high pressure die cast aluminium painted mounting spigot suitable for horizontal mounting (Ø32-42mm) with tilt flexibility of ± 10 degrees, with lensoFlex2® technology,PMMA lenses with wide photometry for increased pole spacing,System efficacy= >90 lumen/watt, Driver efficiency >= 85%, K 07 impact resistance , driver operating voltage 140 V to 277 V, lifetime residual flux @ Tq 35º @50,0000 hours =70%,Ta = 55º,surge protection of 10Kv ( in differential and common mode),Power factor ≥0.90,colour rendering index≥70 and neutral white light (4,100ºK- 5600ºK).with five year warranty for the light fitting.

Supply and fixing cast aluminium stove enameled elliptical shaped bulk head fittings with porcelain holder and mesh guard suitable for LED Lamps including connection etc as required.

Conveyance, installation, testing and commissioning of T 5 outdoor light fitting with FL lamps/LED/ SV/ MH/ CDMT light fittings with all accessories and lamp etc. of all types directly on the existing pipe/ pole including giving connections with the existing wiring etc as required

Supply, fabrication, conveyance and fixing 40 mm dia B class GI pipe bent to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required (for the installation of outdoor light fittings).

Fabricating, supplying, erecting and commissioning of wall mounting, fully compartmentalised, dust and vermin proof cubicle Lighting panel board of size 900x2050x250mm or nearest suitable size using 16 G CRCA MS sheet, painting two coats of best quality epoxy paint over two coats of epoxy primer of approved quality, having front openable bolted type vertical bus bar chamber & cable alley covers with cable entry provisions and bolted type cable glanding plate using 14 SWG CRCA MS sheet at the top. The panel should have 75x40x6.0mm MS channel provided at the bottom as support and comprising the following(Panel drawing attached with the schedule) Incoming:- 63A, 25kA FP MCCB setted to 40 A and rotory drive kit including BUC handle - 1No. Outgoing:-25A, 25kA TP MCCB setted to 20A with 16A two way neutral link and rotory drive kit including BUC handle -6Nos ; All switches and MCCB should be of panel mounting and conforming to IS:13947part III (L&T/SIEMENS/Legrand) Busbar Chamber: Busbar chamber with 25X3mm Copper strips 4 Nos or equivalent size one each for phases and neutral fitted on epoxy insulator. Switch interconnections to be done with suitably rated Copper conductors insulated with PVC heat shrinkable sleeves. Interconnections with the incoming and is also to be carried out using 25x3mm PVC insulated Copper strips supported using epoxy insulators as required. Metering and Indication:- Panel surface mounting 96 Sq.mm,LED Multi-function meter with RS 485 port with three line display to read V,A,PF & F SCHNEIDER or equivalent suitable for 415V,50Hz- 1No, 3Nos 30/5 A tape wound CTs.,22.5mm dia LED type indication lamps for three phases(R,Y &B) - 1 set and control Group B 2A SP MCB (C Curve)- 3 numbers inside the cubicle. The panel board should have hinged shutters for MCCB cubicles and front openable bolted type busbar covers with quarter turn type lock and key arrangement and it should be fabricated as per Kerala State Electrical Inspectorate's norms and only after obtaining approval from the departmental officers at site for the design. Panel internal earthing should be provided using 25x3mm copper strip with two earthing points brought out at bottom side. (Panel drawing attached with the schedule)

Supply, conveyance and fixing 40 A - 50A 25 kA (Ics=100%Icu), 3 pole, MCCB having thermal setting range of 80 - 100% with thermal magnetic release having adjustable OL & SC conforming to IS 13947 suitable for 440 V, 50 Hz, AC supply in the existing panel assembly as required

Supply and fixing IP 65 outdoor installation CAPE 9 module( Model No Aki 09) 200x200x122mm or equivalent Thermoplastic polycarbonate MCB distribution board with PE + N Terminals on the surface using suitable size stainless steel screws.

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, 40A residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing 40 A double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Providing and fixing 0.3 m , 20 mm X 3 mm copper strip on surface or in recess for connections etc. as required.

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq.mm and Upto 95 sq. mm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle).

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Above 35 sq.mm and Upto 95 sq. mm (clamped with 25x3 mm Flat clamp)

Supply of 4 core 4.0 sq mm PVC insulated and PVC sheathed armoured copper Power cable

Supply of 4 core 10 sq mm PVC insulated and PVC sheathed armoured aluminum cable

Supply of 4 core 16 sq mm PVC insulated and PVC sheathed armoured aluminum cable

Supply of 3.5 core 50 sq mm PVC insulated and PVC sheathed armoured aluminum cable

Supply of 3 core 2.5 sq mm PVC insulated and PVC sheathed submersible copper cable

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4C x 10 sq.mm (25mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4C x 16 sq.mm (28mm)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 C X 50 sq. mm (35mm)

Supplying and making end termination nickel plated single compression brass cable gland for 4 core 4 sq mm PVC insulated and PVC sheathed armoured copper conductor cable 1.1 KV grade, including providing earth clip and superior quality copper cable socket.

Supply of 50/38mm (OD/ID) Double Walled Corrugated (DWC) pipes made out of HDPE for mechanical protection to under ground power/communication/ OFC / Signal cable conforming to IS 14930 Part - II,

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

Excavation for cable trenches of depth upto 1.2 m in soft soil including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metre.

Providing and fixing10 SWG copper wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Providing and laying earth connection from earth electrode with 4.00 mm dia copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.

Supply and providing 25x6 mm brass bolt and nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

Supply of superior quality copper earth socket for the 3.15mm (10 SWG) earth conductor including crimping etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc. (but without charcoal/ coke and salt) as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Double pole

Supply and fixing Thermoplastic polycarbonate Cable Junction Boxes IP 65 for outdoor applications ( with knock outs for cable entry )) suitable for cable sizes 16 sq.mm ,182 X 180 X 111 mm CAPE model No TKPC1818 -11m withTerminals or equivalent and accessories for Cable Junction Boxes such as Copper Terminal Set including fixing the accessories using suitable size Stainless steel Bolt and nut, giving necessary connections, making good the damages etc. as required.

Supplying and fixing surface/ recess mounting, vertical type, 415 volts,Dust and waterproof ,IP66 Hensel make or equivalent FPVN 0412 opaque door 4 way 4 + 12 VTPN distribution board of poly carbonate inclusive of tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's, with provision for MCCB as incomer, interconnection between incomer MCCB and bus bars (but without MCB's/ MCCB) as required .

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

Supply and fixing 3 phase,415V, 1 KVAR, ISI marked Heavy Duty Power factor improvement Capacitor with test certificate in the existing enclosure

Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required (excluding reinforcement).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.

Providing 15mm thick cement plaster of mix 1:4 (1 cement : 4 fine sand) at all levels.

Providing and fixing B class G.I. pipes with ISI mark complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. 50 mm dia nominal bore

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc. as required.300 mm width X 50 mm depth X 1.6 mm thickness.

Supplying, fabricating , erecting and commissioning wall mounting, dust and vermin proof cubicle aerator panel board of size 1000x800x250mm or nearest suitable size using 16 G CRCA MS sheet, painting two coats of best quality synthetic enamel paint over a coat of epoxy primer, having separate hinged door and quarter turn key lock covers for incomers and outgoing and power capacitor and front openable bolted type door for wireway box with cable entry provisions , terminal block using 20 A Elmex connector for taking out the supply to the motor, bolted type cable glanding plate using 14 SWG CRCA MS sheet at the top and bottom . Incoming:- 32A, 25kA FP MCCB setted to 25 A and rotory drive kit including BUC handle- 1No. Outgoing-16A, 16kA,TP MCCB, complete with rotory handle - 2 Nos panel surface mounting 96mm square 3 line LED type Multifuntion meter with V,I and frequency measurement(vif) socomec or equivalent suitable for 230 ac 50Hz-1 Nos 32A two way disconnectable type neutral link-3 Nos 2A single pole MCB (C curve) - 7 Nos 16mm dia LED type Phase indication lamp-Red-3 Nos and Yellow - 1 No 16mm dia LED type Phase indication lamp- Green - 2 Nos 16mm dia LED type Phase indication lamp Blue colour-1No 30/5,5VA, metering tapewound C.T of accuracy class 1- 3Nos Legend Plate Danger,415V ,100x75mm , MOTOR start and run - 2Nos Busbar Chamber: Busbar chamber with 25X3mm Copper strips 4 Nos or equivalent size one each for phases and neutral fitted on epoxy insulator. Switch interconnections to be done with suitably rated Copper conductors insulated with PVC heat shrinkable sleeves. Interconnections with the incoming and is also to be carried out using 25x3mm PVC insulated Copper strips supported using epoxy insulators and outgoing with suitable rated copper conductor as required. Protection and Motor starter 415V ,9A, 3 pole contactor AC-3 duty with 1NO+1NC contactor- 2 Nos MPR 301 BE 020 L&T make motor protection Relay - 2 Nos 20A 415V AC ELMEX Connecter DIN Rail - 12 Nos 25 A,415V,50Hz Push button unit ON and OFF - 2 set All MCCBs shall be Ics= 100% Icu.The components should be wired using 4sq.mm PVC insulated copper wire and terminations for input and output will be done using 20A Elmex Connector.

Engaging Labour for rerouting cable in panel at the electrical room. Wireman

Engaging Labour for rerouting cable in panel at the electrical room. Beldar

TELCON Infrastructures