Construction of CC and Nali Niram Works from Usman Residence to Gautiya Puliya .

Name Of Work:- Construction of CC and Nali Niram Works from Usman Residence to Gautiya Puliya .

First class Brick work in 1 : 4 (1 cement :4 coarse sand ) mortar in foundation and plinth including supply of all materials,labour and T&P etc.required for proper completion of the work ( Sl no.303)

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.

Laying CC Road sleb 15 cm 6" thick consisting 1:2:4 cement coarse sand and approved 2 cm (3/4") gauge stone grit over prepared sub-grade after its rectification & bringing it to prorer camber & including supply of all Materials labour and T&P etc required for proper completion of work. finished to temp as directed by Engineer-in charge but excluding cost of metal required for rectification of the sub grade (sor 773)

12 mm thick plaster with cement and coarse sand morta in proportion of 1 : 4 cement and fine sand of fine sand in single coat on fair side of single or half brock wall for interrior plastering including arises interior rounded angles chamfers and of rounded angles not exceeding 80mm in grit and finished even and smooth schedule no 584

5.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).as per sor 284A

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars as per sor 504

GST 18 Percent