REPAIR REPLACEMENT OF FENCING COMPOUND WALL GATES ETC UNDER DGNP V

Amount

Dismantling chain link fencing, any type complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded concrete portion and making good disturbed natural ground.

Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50m and making good surface.

M&L for PCC (1:3:6) type C2 using 40mm graded stone aggregates as in foundations, filling and mass concrete etc complete all as specified and directed.

M&L for reinforcement steel using TMT bars, of 10 mm dia and over cut to length bent to shape required including crancking, bending spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for reinforcement steel using TMT bars 5 mm dia and over and upto 10 mm dia in stirrups, cut to length bent to shape required including crancking, bending spirally for hooping for column hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for reinforced cement concrete type B-1 1:2:4 (20mm graded aggregate) in precast fencing posts or struts for fencing average sectional area exc 100 and n exc 250 sqcm with or without chamfered angles and flat, splayed rounded or mitered tops as directed and fixed complete all as specified and directed.

Supply only PVC coated chain link fencing 100 x 100 mm aperture, 4mm dia.

Fixing only MS galvanised chain link fencing 100 x 100 mm aperature, 4mm dia, incl binding with MS rod complete all as specified and directed.

M&L for 40x6mm thick mild steel flat iron fixed to fencing post to fasten chain link fencing incl cutting, drilling holes etc complete all as specified and directed.

S&F 12mm dia machine made mild steel bolts/nuts, hexagonal/square headed at one end and screwed the other with MS washer and one hexagonal nut complete, but length of bolt exc 5cm but n exc 10cm long complete.

M&L for MS round bars 10 mm dia and over, cut to length, bent to shape required, including crancking, bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L Preparing old plastered or unplastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75mm thick PCC (1:2:4) type B-1 (using 20mm graded aggregate) as in plinth protection and finished the surface even and smooth without using extra cement complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar (but not backing) removing off the premises complete all as specified and directed.

M&L15 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

Material and labour for Chequered cement concrete tiles 20cm x 20cm x 20mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and pigments to match the coloured complete all as specified and directed.

M&L for non-skid coloured ceramic tiles (Square or rectangular ) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile surfaces complete all as specified and directed.

Material and labour for designer external parking floor tiles of 20mm thick,set, jointed and pointed in neat cement slurry in floors with grey cement and pigments to match the coloured complete all as specified and directed. Make:Ultra/Equivalent.

M&L for non-skid coloured ceramic tiles (Square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile surfaces complete all as specified and directed.

M&L dark shade Vitrified Ceramic tiles (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile surfaces complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar including all quions, arches, pillars etc complete all as specified and as directed.

Material and labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6 meters mean radius built in cement motar 1:6 complete all as specified and directed.

M&L 10 mm thick rendering in cement mortar (1:4) as backing coat complete all as specified.

M&L coloured Glazed ceramic tiles of size 300x200x 6 to 7 mm thick as in vertical surface like skirting/dado, set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

Taking down chowkats or frames n.exc 1.5 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

S&F factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supply and fix in openings as per specificatin and directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2mm plain colour PVC sheet of back face, supply and fix in frame at site as per specification for particle board core.

Removing the damaged/defect aluminium doors of any size and description and refixing the door in same position after repairs including replacement of new aluminium sections like joining cleats, glazing clips, rubber packing, snap beading, screws, peg stays, hinges, aluminium handles, tower bolts etc of same size complete all as specified and directed.

Removing the damaged/defect aluminium windows of any size and description and refixing the door in same position after repairs including replacement of new aluminium sections like joining cleats,glazing clips, rubber packing, snap beading, screws, peg stays, hinges, aluminium handles, tower bolts etc of same size complete all as specified and directed.

S&F for 100mm butt hinges medium weight, cold rolled mild steel and fixed complete all as specified and directed.

S&F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F for 100mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 100mm aluminium handles cast type anodised complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.)/galvalume sheets in roof coverings complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550MPa as in roof covering/clading to wall fixed with self tapping screws with integrated washer head, EPDM washer and cyclone washer complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with integrated washer head, EPDM washer and cyclone washer as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Rolled sections Fe-410 W in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel or steel based surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

S&F in repairs vitreous china squatting pans orissa pattern size 580x440mm white with integral foot rests including provision of lime concrete bedding incl refixing flushing cistern and flush pipe etc complete all as specified and directed.

S&F in repairs, viterous china urinal, bowl, type flat back of size 465x355x265 mm white (minimum) with grating and union for discharge pipe complete all as specified and directed.

S&F in repairs, Vitreous china urinal partition white of size 310 x 700mm including all fittings complete all as specified and directed.

S&F in repairs, 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level white with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs, plastic water closet seat and cover black, closed pattern with flat bottom, and cover & mild steel chromium plated or aluminised hinging device for EWC etc complete all as specified and directed.

S&F in repairs, wash basins, viterous china white flat back type size 550x400mm including cutting for and pinning in ends of brackets or erecting stand incl all fittings etc all as specified and directed.

S&F urinals spreader of PTMT any colour for fixing with 15mm dia pipe.

S&F PVC connection (high density) 15mm dia 600mm with PTMT nuts both ends with rubber washer all as specified and directed.

S&F in repairs, 15mm dia bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs, 15mm dia pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly- nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs, 15mm dia stop valve/angle cocks, fancy type, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repairs brass chromium tubular towel rail, 20mm dia D type 60cm long between flanges.

Dismantling water tank exc 250 but not exc 500 ltr capacity etc complete all as specified and directed.

S&F PVC water tank rotational moulded polyethylene water storage tanks,double layered, (cylindrical vertical with closed top) hoisted and fixed in position) 500 ltrs capacity complete all as specified and as directed.

S&F 15mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in repairs complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Rendering 15mm thick cement plaster in CM 1:6 on fair faces of brickwork or concrete surfaces, rendering is to be finished even and smooth (without using extra lime or cement).

M&L for rendering 15mm thick CM 1:4 on fair faces of brick/concrete surfaces and finished even and smooth without using extra cement.

M&L Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 3mm thick putty finish complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

M&L Preparing old plastered surfaces of walls and applying Two coats of weather proof paint (exterior emulsion) over a coat of primer complete all as specified and directed.

Supply only Integral Water Proofing Compound.

S&F 20mm gun metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed as in repairs,complete all as specified and directed.

S&F 15mm dia hand shower (health faucet) with 8mm dia, 1 meter long flexible tube & wall hook fancy type, as fixed in repairs complete all as specified and directed.

M/S REAL POWER SYSTEMS

ANJANA ENTERPRISES

BHASKARA RAO CONSTRUCTIONS

SREE VSM ENGINEERING

P JAGANNADHA RAJU