Tender for Fully Turnkey Contract Work for Supply, Laying, Installation, Testing & Commissioning of 11KV Underground cable , Transformers, Ring Main Unit (RMU) with dismantling work of existing TC-DODP/Pole and crediting at GIDC Area, Umargam, Dist.-Valsad (Gujarat) under Umargam sub division, Vapi Industrial Division in A.I.I.-SI Scheme.

Particulars of Item Unit Qty. In Rs.

H.T Supply Portion

Supply of 11/0.433KV three Phase 800KVA (Copper Wound) Star-

1 1 (Level-1) rated CRGO Cold Distributed transformer as per Nos. 35

DGVCL technical Specification

Supply of 11/0.433KV three Phase 1000KVA (Copper Wound) Star-

2 1 (Level-1) rated CRGO Cold Distributed transformer as per Nos. 49

DGVCL technical Specification

Supply of 11/0.433KV three Phase 1250KVA (Copper Wound) Star-

3 1 (Level-1) rated CRGO Cold Distributed transformer as per Nos. 32

DGVCL technical Specification

Supply of 11KV, 630 Amp, Scada Compatible RRL Type -3 Way

(i.e 2 Nos. of Isolator and 1 Nos. of Breaker ) Ring Main Unit

including all accessories (i.e. Earthing material for RMU side,

indoor termination kit etc) as per DGVCL Technical Specification.

Including 2nos. of Earthing. Eathing as per drawing. (All Material

is under Bidder Scope )

Supply of 11KV, 630 Amp, Scada Compatible RRR Type -3 Way

(i.e 3 Nos. of Isolator ) Ring Main Unit including all accessories

5 (i.e. Earthing material for RMU side, indoor termination kit etc) as Nos. 0

per DGVCL Technical Specification. Including 2nos. of Earthing.

Eathing as per drawing. (All Material is under Bidder Scope )

Supply of 11KV, 630 Amp, Scada Compatible RRLL Type -4 Way

(i.e 2 Nos. of Isolator and 2 Nos. of Breaker ) Ring Main Unit

including all accessories (i.e. Earthing material for RMU side,

indoor termination kit etc) as per DGVCL Technical Specification.

Including 2nos. of Earthing. Eathing as per drawing. (All Material

is under Bidder Scope )

Supply of 11KV, 630 Amp, Scada Compatible RRRL Type -4 Way

(i.e 3 Nos. of Isolator and 1 Nos. of Breaker ) Ring Main Unit

including all accessories (i.e. Earthing material for RMU side,

indoor termination kit etc) as per DGVCL Technical Specification.

Including 2nos. of Earthing. Eathing as per drawing. (All Material

is under Bidder Scope )

Supply of 11KV 3C 240mm2 XLPE Under Ground cable as per

DGVCL Technical Specification

Supply of 11KV 3C 185mm2 XLPE Under Ground cable as per

DGVCL Technical Specification

H.T Labour Portion

Particulars of Item Unit Qty. In Rs.

Installation, Testing, Commissioning of 11/0.433KV three Phase

800KVA (Copper Wound) Star-1 (Level-1) rated CRGO Cold

1 Distributed transformer as per DGVCL technical Specification (all Nos. 35

the related materials are under Scop of Bidder- including 2 Nos.

of Maintenance free Earthing and H.T and L.T Side Termination)

Construction of plinth/ Foundation for11/0.433KV three Phase

800KVA (Copper Wound) Star-1 (Level-1) rated CRGO Cold

2 Distributed technical specification and Drawing. All required Nos. 35

material will be supplied by contractor. The Design should be

approved from structure Engineer.

Installation, Testing, Commissioning of 11/0.433KV three Phase

1000KVA (Copper Wound) Star-1 (Level-1) rated CRGO Cold

3 Distributed transformer as per DGVCL technical Specification (all Nos. 49

the related materials are under Scop of Bidder- including 2 Nos.

of Maintenance free Earthing and H.T and L.T Side Termination)

Construction of plinth/ Foundation for11/0.433KV three Phase

1000KVA (Copper Wound) Star-1 (Level-1) rated CRGO Cold

4 Distributed technical specification and Drawing. All required Nos. 49

material will be supplied by contractor. The Design should be

approved from structure Engineer.

Installation, Testing, Commissioning of 11/0.433KV three Phase

1250KVA (Copper Wound) Star-1 (Level-1) rated CRGO Cold

5 Distributed transformer as per DGVCL technical Specification (all Nos. 32

the related materials are under Scop of Bidder- including 2 Nos.

of Maintenance free Earthing and H.T and L.T Side Termination)

Construction of plinth/ Foundation for11/0.433KV three Phase

1250KVA (Copper Wound) Star-1 (Level-1) rated CRGO Cold

6 Distributed technical specification and Drawing. All required Nos. 32

material will be supplied by contractor. The Design should be

approved from structure Engineer.

Installation, Testing and commissioning of 11KV, 630 Amp, Scada

Compatible RRL Type -3 Way (i.e 2 Nos. of Isolator and 1 Nos. of

Breaker ) Ring Main Unit including all accessories (i.e. Earthing

material for RMU side, indoor termination kit etc) as per DGVCL

Technical Specification. Including 2nos. of Earthing. Eathing as

per drawing. (All Material is under Bidder Scope )

Construction of plinth for 11KV, 630 Amp, Scada Compatible RRL

Type -3 Way (i.e 2 Nos. of Isolator and 1 Nos. of Breaker) Ring

Main Unit as per DGVCL's technical specification mentioned in

drawing no: Drg. All required material will be supplied by

contractor. The Design should be approved from structure

Installation, Testing and commissioning of 11KV, 630 Amp, Scada

Compatible RRR Type -3 Way (i.e 3 Nos. of Isolator ) Ring Main

Unit including all accessories (i.e. Earthing material for RMU side,

indoor termination kit etc) as per DGVCL Technical Specification.

Including 2nos. of Earthing. Eathing as per drawing. (All Material

is under Bidder Scope )

Construction of plinth for 11KV, 630 Amp, Scada Compatible RRR

Type -3 Way (i.e 3 Nos. of Isolator ) Ring Main Unit as per

10 DGVCL's technical specification mentioned in drawing no: Drg. All Nos. 0

required material will be supplied by contractor. The Design

should be approved from structure Engineer.

Installation, Testing and commissioning of 11KV, 630 Amp, Scada

Compatible RRLL Type -4 Way (i.e 2 Nos. of Isolator and 2 Nos.

of Breaker ) Ring Main Unit including all accessories (i.e. Earthing

material for RMU side, indoor termination kit etc) as per DGVCL

Technical Specification. Including 2nos. of Earthing. Eathing as

per drawing. (All Material is under Bidder Scope )

Construction of plinth for 11KV, 630 Amp, Scada Compatible RRLL

Type -4 Way (i.e 2 Nos. of Isolator and 2 Nos. of Breaker ) Ring

Main Unit as per DGVCL's technical specification mentioned in

drawing no: Drg. All required material will be supplied by

contractor. The Design should be approved from structure

Installation, Testing and commissioning of 11KV, 630 Amp, Scada

Compatible RRRL Type -4 Way (i.e 3 Nos. of Isolator and 1 Nos.

of Breaker ) Ring Main Unit including all accessories (i.e. Earthing

material for RMU side, indoor termination kit etc) as per DGVCL

Technical Specification. Including 2nos. of Earthing. Eathing as

per drawing. (All Material is under Bidder Scope )

Construction of plinth for 11KV, 630 Amp, Scada Compatible RRRL

Type -4 Way (i.e 3 Nos. of Isolator and 1 Nos. of Breaker ) Ring

Main Unit as per DGVCL's technical specification mentioned in

drawing no: Drg. All required material will be supplied by

contractor. The Design should be approved from structure

Labour charge for horizontal drilling using Auger machine without

damage to surface road at max 2.0 mtrs depth & putting of

kg/cm2 , class-4,Green color, 110mm O.D. , 8.5mm thickness

H.D.P.E. pipe confirms to IS 4984-1987(3rd revision) and BIS

certification and laying of 11KV/22KV XLPE cable of size up to

mm2 in HDPE pipe, as per Site Condition (excluding cost of

pipe). The detail map obtained from HDD machine and excell

sheet(hard and soft copy) indicating the respective depth and

distance from adjacent landmark for each segment for HDD is

must required to be submitted. HDD to be carried out at depth

1.5 mtrs to 2.0 mtrs as per site conditions and as per instruction

Labour charge for excavation of cable trench of 400mm width x

1200mm depth, in any type of soil for laying of cable of size up to

240 mm2 (For additional cable 200 mm additional width shall be

considered i.e. half trench length is to be considered)

Labour charge for laying of 11kV / 22 kV XLPE Cable of size up to

240 mm2 & preparation of sand layer 100mm thick, in the cable

trench & covering the cable with 150 mm dia (Inner), thickness

25 mm, 1.0 meter long RCC half round muffs and providing and

fixing of 4inch width yellow colour polyethylene tape with printing

"CAUTION ELECTRIC CABLE BELOW" at 0.75 m depth from

ground surface after laying cable in trench. This will provide

indication that electric cable is passing underground so as to

protect cable from mechnical injuries, refilling the same, as per

Instruction of Engineer in Charge (EIC).

Providing & fixing concrete stone route marker of 300 mm width

x 150 mm thick x 650 mm height embedded in earth at least

mm below & 350 mm above ground level respectively at distance

approx 50 meters along the length of cable. The RCC concreting

(1:2:4)(all necessary maeterials will be in bidder's scope) of route

marker is to be carried out 300 mm width x 150 mm thick x

18 mm below ground level as per instruction of EIC. The route Nos. 425

marker should be with name of company with approved yellow

colour-DGVCL. The distance from marker to cable and cable

depth with feeder name etc., marked with arrow sign is to be

painted on it.The route marker is to be fixed at location near to

any fixed permanent location (not necessary to fix exact on top of

cable) as per instruction of EIC.

Labour work for RCC concreting on disputed location and

repairing of damage portion of road crossing for the work carried

out for roads crossing as well as concreting & muffing of ploes

including all materials (1:2:4)

Supply & fixing of heat shrink type end terminations

20 (outdoor/indoor) for 11kV 3C x 240 mm2 size XLPE cable as per Nos. 731

DGVCL technical specification

Supply & fixing of heat shrinkable straight through joint for 11kV

21 3C x 240 mm2 size XLPE cableas per DGVCL technical Nos. 50

Supply & fixing of heat shrink type end terminations

22 (outdoor/indoor) for upto 11kV 3C x 185 mm2 size XLPE cable as Nos. 309

per DGVCL technical specification

Labour charge for excavation of 2100mm long x 1200mm wide x

1200 mm deep joint pits for installation of 11kV / 22kV Straight

through joints as per instruction of engineer-in-charge & covering

the cable with 150 mm dia (Outer), thickness 25 mm, 1.0 meter

long RCC half round muffs & refilling same as per instruction of

Preparation and submission of 6 (six) copies, of complete layout

drawings with GIS mapping (with latest Version) as per actual

cable routing showing road crossing, HDPE pipe sleeving, jointing

locations, markers etc.

Providing and fixing of Sign Board at junction point Made out of

mm aluminium sheet size 750x300 mm (2.5 x 1ft) rectangle, as

per design, pre treated with phosphate process and acid etching

coated with one coat of epoxy primer and two coats of best

quality paints, refloctrorised with Hi-Intensity retro – reflective

sheeting as per the latest and frame fabricated from suitable size

iron angle. The Sign Board is to be fixed on the base prepared

from channel and bracing angles which is grouted by means of

cement concreting of 1:2:4 for size of 300 mm dia x 800 mm

height (500 mm to be grouted in ground). The details to be

displayed on sign board will be given by In-charge Engineer.

(a) Hi intensity Micro prismatic Grade

Providing & fixing of aluminium tag of size 250 mm (L) x 75 mm

(W) from 3 mm aluminium sheet along with 1.0 mm dia

aluminium binding wire for fixing of aluminium tag near end

26 termination joint at DP structure for identifyng the cable. The No. 165

details of feeder i.e. 11 / 22 KV with feeder name shound be

punched on the tag by letter punch of size 16 mm as per

instruction of In-charge Engineer.

Supply of 6.11kg/cm2 , class-4,Green color, 110mm O.D. ,

mm thickness H.D.P.E. pipe confirms to IS 4984 and BIS

certification for laying of underground 11KV / 22KV XLPE cable up

to 240 mm2 size.

Labour charge for erecting of 11kV / 22 kV XLPE cable of size up

to 240 mm2 on DP Structure with fixing of 02 Nos polymer cleats PerJob

on top and middle part.Polymer cleats, nut bolts etc. fixing

material to be provided by contractor.

Providing and fixing of pipe type earthing from 80 mm dia class-B

GI pipe with pit to be filled with salt & coke and construction of

chamber as per DGVCL Drg. No. dg /100 for DP and cable. The

earthing pit should be joined with cable by G.I. strip of size 1”

width & 2 mm thick. All material GI pipe, Coke, Salt etc will be

supplied by bidder.

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE)

(WITH TRANSFORMER) WITH CREDITING OF FABRICATION &

30 TRANSFORMER AT STORE & STACKING OF POLE SAFELY ON Nos. 591

ROAD SIDE AND CREDITING TO DEPARTMENTAL STORE OR AS

PER INSTRUCTION OF ENGINEER IN CHARGE

DISMENTALLING OF TRANSFORMER CENTRE (8 MTR PSC POLE)

(WITHOUT TRANSFORMER) WITH CREDITING OF FABRICATION

31 AT STORE & STACKING OF POLE SAFELY ON ROAD SIDE AND Nos. 81

CREDITING TO DEPARTMENTAL STORE OR AS PER

INSTRUCTION OF ENGINEER IN CHARGE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG

PSC POLE(WITHOUT TRANSFORMER) WITH CREDITING OF

FABRICATION AT STORE AND STACKING OF POLE SAFELY ON

ROAD SIDE OR CREDITING TO DEPARTMENTAL STOREROAD

SIDE AND CREDITING TO DEPARTMENTAL STORE OR AS PER

INSTRUCTION OF ENGINEER IN CHARGE

DISMENTALING OF TRANSFORMER CENTER ON 10MTR,270KG

PSC POLE(WITH TRANSFORMER) WITH CREDITING OF

33 FABRICATION AT STORE AND STACKING OF POLE SAFELY ON Nos. 0

ROAD SIDE AND CREDITING TO DEPARTMENTAL STORE OR AS

PER INSTRUCTION OF ENGINEER IN CHARGE

DISMENTALING OF RSJ (9/11 METER) POLE AND CREDITING

34 THE OLD MATERIAL TO DEPARTMENTAL STORE OR AS PER Nos. 437

INSTRUCTION OF ENGINEER IN CHARGE

Dismentalling of existing Dist.X'mer center(RSJ /STP POLE)

25/63/100/200 KVA with all fabrication & creditig the old material

CREDITING TO DEPARTMENTAL STORE OR AS PER

INSTRUCTION OF ENGINEER IN CHARGE

DISMENTALLING OF 8 MTR PSC POLE WITH CREDITING OF

FABRICATION AT STORE & STACKING OF POLE SAFELY ONROAD

SIDE AND CREDITING TO DEPARTMENTAL STORE OR AS PER

INSTRUCTION OF ENGINEER IN CHARGE

DISMENTALLING OF 10 MTR PSC POLE WITH CREDITING OF

FABRICATION AT STORE & STACKING OF POLE SAFELY ON

ROAD SIDE AND CREDITING TO DEPARTMENTAL STORE OR AS

PER INSTRUCTION OF ENGINEER IN CHARGE

Providing and fixing of FRP fencing of 1500mm height at

Distribution Transformer Centers with necessary excavation,

concreting for grouting vertical posts up to 450 mm in ground,

38 Hardware, accessories, fittings, lock, etc. complete as shown in RMT 2111.5

specifications and drawing enclosed. The fencing shall comprise

of one gate 2000 mm wide having two flaps and payment for the

same shall be measured on Rmt basis.

providing and fixing pre-cast rubber dye inter locking concrete

block 60 mm thick with grade of concrete M300 pneumatic

compressed/vibrated mechanically and as per approved design

confirming to IS 15658:2006 including 35 mm sand layer for

levelling and filling the joint with sand in proper line and level as

per guidelines of IRC:SP 63-2018 etc. complete.

Estimate Sheet for Umargam GIDC LT - Underground Cable Work

Particulars of Item Unit Qty. In Rs.

L.T Supply Side

LT XLPE Cable Supply of XLPE (IS:7098) (I) -88 ISI marked

1 Armoured cable multistrand aluminium conductor for 1.1 KV of

following Size of Cable

a 1C 300mm2 XLPE Cable Meter 4640

b 4C x 240 MM Aluminium Meter 1480

LT Cable Terminetion: Supply of Cable Termination on LT Pole,

FSP, LT Distribution Trasformer Box of pole mounted trasformer

of LT cable grade as specified below. LT CABLE including

cutting,stripping of cable,insulations,providing compression type

terminals,suitable cable glands,crimping lugs with necessary

connections.Work carried out up to consumer premises with

meter shifting, and provide load side cable as per site conditions

and as per EIC. All the accessories in the scope of biddier.

a 1C X 300mm2 XLPE Cable Nos. 1854

b 3.5C x 240 MM Aluminium Nos. 592

CABLE TERMINAL FERRULS: The PVC Cable terminal ferruls for

identification of phase sequence and feeder/PSS/FSP name of

HT/LT cables shall be provided at every termination of all cables

stating detail as under. HT Cable :Feeder name/Phase(R/Y/B) LT

Cable : TC/FSP name/Phase(R/Y/B/N). All the accessories in the

scope of biddier.

CABLE TAG: The PVC tag for identification of

feeder/PSS/FSP/RMU name of HT/LT cables shall be provided at

every 10 MTR HT feeder:station/Feeder LT Feeder :

PSS/Transformer/FSP

5 Supply of FSP as per technical specification attched Nos. 148

Supply of earthing strip 50 x 3 mm

G.I. strip for pole mounted transformer and upto FSP,MSP,SFU,

6 Busbar Etc as well as connection to be made to the earth pit. Meters 1480

Rates inclusive of hot dipped hardwares. All the accessories in the

scope of biddier.

Suppy of Busbar Chamber-100 Amp switch fuse unit made by

metal box and capacity of 250 A, Mostaly used in flat/Socity area.

Installation worked caried out with instruction of EIC. And as per

the drawing approved by CA- Minimum 16 Nos. of CKT ( As per

Technical specification), All the accessories in the scope of

L.T Labour Side

Sr. Unit Cost In Rs. (with

Particulars of Item Unit Qty.

LT XLPE CABLE providing erection and XLPE (IS:7098) (I) -88 ISI

marked armoured cable multistrand aluminium conductor 1.1kv to

be laid by diging cable trench method of following size cable in

a 3.5C x 300 MM Aluminium Meter 2060

b 3.5C x 240 MM Aluminium Meter 6180

Warning Tap: For laying on trench after laying cable on trench to

2 provide cable route below land surface in underground trench to Meter 0

protect cable for mechenical injuries

LT Cable Termination: Cable Termination on LT Pole, FSP, LT

Distribution Trasformer Box of pole mounted trasformer of LT

cable grade as specified below. LT CABLE including

cutting,stripping of cable,insulations,providing compression type

terminals,suitable cable glands,crimping lugs with necessary

connections.Work carried out up to consumer premises with

meter shifting, and provide load side cable as per site conditions

and as per EIC.

a 1C x 300 MM Aluminium Nos. 824

b 3.5C x 240 MM Aluminium Nos. 1648

CABLE TERMINAL FERRULS: The PVC Cable terminal ferruls for

identification of phase sequence and feeder/PSS/FSP name of

4 HT/LT cables shall be provided at every termination of all cables Nos 2472

stating detail as under. HT Cable :Feeder name/Phase(R/Y/B) LT

Cable : TC/FSP name/Phase(R/Y/B/N)

CABLE TAG: The PVC tag for identification of

feeder/PSS/FSP/RMU name of HT/LT cables shall be provided at

every 10 MTR HT feeder:station/Feeder LT Feeder :

PSS/Transformer/FSP

Installation, Comissioning and Testing of FSP as per technical

6 specification attched. Erection shall be carried out as per Nos. 148

approved drawing and site condition.

Instalation, Testing, Commissioning Busbar Chamber switch fuse

unit made by metal box and capacity of 250 A, Mostaly used in

flat/Socity area.

Installation worked caried out with instruction of EIC. And as per

the drawing approved by CA- Minimum 16 Nos. of CKT ( As per

Technical specification)

Supply, Installation, Testing and commissioning erecting earth pit

of minimum bore dia. 150 mm size approved make safe Earthing

Electrode consisting Pipe in pipe Technology as per IS 3043-1987

made of corrosion free G.I. Pipes having Outer pipe dia of 48 mm

having 80-200 Micron galvanising connections, terminal dia of

mm with constant ohmic value surrounded by highly conductive

compound with high charge dissipation with civil works of

earthing chamber. For Electrical installation covering Transformer

neutrals,HT & LT switchgears for independent earthing in normal

soil, Length of Pipe 2/3 mtrs.Backfilling compound 2 bags of

Kg each. ( As per technical specification and drawing .)

2000 MM electrode Nos. 0

3000 MM electrode Nos. 296

intstallation, Supply, Installation, Testing and commissioning of

a 40mm/32mm Meter 0

b 90mm/75 mm Meter 0

Lt cable saddling works: Direct cable saddleing with wall and etc

this work GI type saddle and nail shall be used.

installation & commissioning of earthing conductor 50 x 3 mm

G.I. strip for pole mounted transformer and upto

FSP,RMU,MSP,SFU, Busbar Etc as well as connection to be made

to the earth pit. Rates inclusive of hot dipped hardwares.

Paint Pointed Letter 2 inch size(Marking on RMU,

12 Transformer, FSP, MSP, SFU Etc In any palce.(As per directive of Ea 2000

Engineer Incharge) with supply of color

Dismentaling & removing of service line from pole & crediting to

Dismentaling & removing of service line from pole & crediting to

Total Cost (Supply+Labour)