OFFICE BUILDING FARMERS TRAINING CENTER REST HOUSE A.P.M.C MARKET YARD HARIJ

Items Total amount according

estimated out Item of work Tendered Rates Unit to estimated quantities

Excavation for foundation upto 1.50 mt depth including sorting out and stacking of useful

materials and disposing the excavated stuff upto 50 mt lead (A) Loose or soft soil

(EXECUTED WITH MECHANISED EFFORTS MACHINARIES)

{S.O.R. It. Code 04001B}

Excavation for foundation 1.50 mt to 3.00 mt depth including sorting out and stacking of useful

materials and disposing the excavated stuff upto 50 mt lead (A) Loose or soft soil

(EXECUTED WITH MECHANISED EFFORTS MACHINARIES)

{S.O.R. It. Code. 04002B}

Filling foundation and plinth with murrum or selected soil in layer of 20 cm in thickness

3 164.25 including ramming watering and consolidating etc. complete 271.15 Cu.M

{S.O.R. It. Code. 04008A}

Filling in foundation and plinth with sand in layers including watering ramming and

4 109.50 consolidating etc. complete. {S.O.R. It. Code. 04007A} 424.99 Cu.M

Filling available excavated earth (excluding rock) in trenches,plinth,slides of foundations etc.in

layers not exceeding 20 cm in depth consolidating each disposited layer by ramming and

Carring out plinth treatment to post construction / existing structure by spraying chemical

solution for termite control treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration

Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 %

6 365 concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / 123.12 Cu.M

Sqm of surface is recommended as per I.S

{SOR. It. Code 22007}

Providing and laying controlled cement concrete M-100 and curing complete including the cost

of formwork with sheathing steel sheets so as to give a fair finishand reinforcement for reinforced

7 80 concrete work in :(a) Foundations, footings Bases of columns and the like and Mass concrete. 3595.00 Cu.M

Providing and laying controlled cement concrete M-250 and curing complete including the cost

of formwork with sheathing steel sheets so as to give a fair finishbut excluding the cost of

reinforcement for reinforced concrete work in foundation footings, base of columns and mass

concrete. (COLUMN BASE) RA

Providing and laying controlled cement concrete M-250 and curing complete including the cost

of formwork with sheathing steel sheets so as to give a fair finishbut excluding the cost of

9 30.84 reinforcement for reinforced concrete work in foundation footings, base of columns and mass 4283.00 Cu.M

concrete. (TRAPAZOIDE) RA

Providing and laying controlled cement concrete M-300 and curing complete including the cost

of formwork with sheathing steel sheets so as to give a fair finishbut excluding the cost of

10 23 reinforcement for reinforced concrete work in foundation footings, base of columns and mass 5382.00 Cu.M

concrete. (PEDESTRAL) RA

Providing and laying controlled cement concrete M-300 and curing complete including the cost

of formwork with sheathing steel sheets so as to give a fair finishbut excluding the cost of

11 reinforcement for reinforced concrete work Cu.M

24.66 G.F SLAB 5967.59 Cu.M

17.73 F.F SLAB 6006.49 Cu.M

15.06 S.F SLAB 6044.99 Cu.M

5.78 T.F SLAB 6083.49 Cu.M

Providing and laying controlled cement concrete M-200 and curing complete including the cost

of formwork with sheathing steel sheets so as to give a fair finishbut excluding the cost of

reinforcement for reinforced concrete work in BEAMS

10.74 GROUND TIE LEVEL 5172.25 Cu.M

32.61 PLINTH TIE LEVEL 5172.25 Cu.M

33.00 G.F SLAB 5172.25 Cu.M

40.00 F.F SLAB 5211.15 Cu.M

18.50 S.F SLAB 5250.05 Cu.M

4.52 MEZZANINE FLOOR 5288.95 Cu.M

6.9 T.F SLAB 5288.95 Cu.M

Providing and laying controlled cement concrete M-200 and curing complete including the cost

of formwork with sheathing steel sheets so as to give a fair finishbut excluding the cost of

13 reinforcement for reinforced concrete work in (IV) SLABS

43.98 G.F SLAB 5007.85 Cu.M

45.51 F.F SLAB 5046.75 Cu.M

8.09 S.F SLAB 5085.65 Cu.M

Items Total amount according

Items Total amount according

estimated out Item of work Tendered Rates Unit to estimated quantities

4.21 MEZZANINE FLOOR 5124.55 Cu.M

8.40 T.F SLAB 5124.55 Cu.M

Providing and laying controlled cement concrete M-200 and curing complete including the cost

of formwork with sheathing steel sheets so as to give a fair finishbut excluding the cost of

14 reinforcement for reinforced concrete work in STAIRCASES

12.24 PLINTH TO G.F SLAB 5935.72 Cu.M

12.24 G.F SLAB TO F.F SLAB 5974.62 Cu.M

12.24 F.F SLAB TO S.F SLAB 6013.52 Cu.M

5.46 S.F SLAB TO T.F SLAB 6052.42 Cu.M

Providing and laying controlled cement concrete M-250 and curing complete including the cost

15 of formwork with sheathing steel sheets so as to give a fair finishbut excluding the cost of for

reinforced concrete work in Wall

Providing and laying controlled cement concrete M-200 RMC and curing complete including the

cost of formwork with sheathing steel sheets so as to give a fair finishbut excluding the cost of

reinforcement for reinforced concrete work in Lintels

36743 Providing Thermo Mechanically Treated bar (T.M.T.) (I.S.I. Mark) conforming to I.S. - 1786 Fe -

17 500D for R.C.C. work including bending, binding and placing in position complete. All floor 78.16 Kg

7.99 Brick work using common Brunt clay building bricks having crushing strength not less than

18 Kg./Sq.cm.. In foundation and plinth in cement mortar 1:6 (1cement : 6 fine sand) (b) 3672.26 Cu.M

Conventional {S.O.R. It. Code. 06002BA}

172.30 Brick work using common Brunt clay building bricks having crushing strength not less than

Kg./Sq.cm.. In super structure above plinth level upto floor two level in cement mortar 1:6

(1cement : 6 fine sand)(b) Conventional {Ground Floor & First Floor}

{S.O.R. It. Code. 06002BA + 06006B }

135.09 Brick work using common Brunt clay building bricks having crushing strength not less than

Kg./Sq.cm.. In super structure above plinth level upto floor two level in cement mortar 1:6

(1cement : 6 fine sand) (b) Conventional {Second Floor & Third Floor }

Half brick masonry in common brunt clay building bricks having crushing strength not less than

35 Kg./Sq.cm.. In cement mortar 1:3 (1cement : 3 coarse sand) with 2 Nos. of 6 mm. Diameter

21 mild steel round bars after every three coarse embedded in cement mortar in super structure

above plinth level GROUND FLOOR,FIRST FLOOR,SECOND FLOOR

{S.O.R. 06009BA + 06011BA} GROUND FLOOR

Providing and fixing 35 mm thick shutters for Doors including Indian teak wood frames 12 cm x

84.10 7 cm. size including brass fixtures and fastenings including Polishing with malemine polish on

new wood and wood based surface to give an even surface including cleaning, the surface of all

dirt, dust and sand papering smooth and including a coat of wood filler (ii) Fully Panelled

Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for

plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement :

23 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Sq.M

Coarse sand) finished with trovel including scaffolding curing etc. complete.

{SOR It. Code. 17017 +17007B}

20 mm. Thick sand faced GUTAKA FINISHED cement plaster on walls upto height 10 mt

above ground level consisting of 12 mm. Thick backing coat of c.m. 1:3 (1 cement : 3 sand) and

24 8 mm. Thick finishing coat of c.m. 1:1 (1 cement : 1 sand) including making groove 6 mm wide Sq.M

and 8 mm deep as approved pattern etc. complete as directed. {SOR Code. 17009+17007B}

77.27 UP TO PLINTH 327.45 Sq.M

Providing and fixing chiken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at junction

the Brick.masonary and reinforcement cement concrete member including fixing materials

25 scaffolding labour etc. complete 259.00 Rmt

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat

26 cement finishing, watering etc. complete. 24.04 Rmt

{SOR It. Code. 17015}

Items Total amount according

Items Total amount according

estimated out Item of work Tendered Rates Unit to estimated quantities

52 Providing and laying damp proof course 25mm thick cement concrete 1:2:4 (1-Cement : 2 coarse

27 sand : 4 stone aggregate 10 mm nominal size) and curing complete 314.92 Sq.M

{SOR It. Code. 05021A}

974 Providing and laying vitrified tiles 9 mm thick antiskid,full body ,1200x600 in flooring, and

skirting laid on the bed of 12 mm thick cement mortar 1:3 (1-cement:3-course sand) finishing

with flush pointing in white cement(upto 10 ton)

231.4 Providing and laying vitrified tiles 9 mm thick full body,300x300 in flooring,dedo and skirting

laid on the bed of 12 mm thick cement mortar 1:3 (1-cement:3-course sand) finishing with flush

29 pointing in white cement(upto 10 ton) 1685 Sq.M

488.11 Providing and fixing rubi red Granite of 20 mm thick of uniform size and color for staircases in

treads & risers, dado or fascia etc. any length including necessary machine cut edges (uniform

thickness) rounded edges, nosing, grooves in risers and treads laid in combination of different

marble as pattern and instructions of Architect, necessary cement mortar bedding in C.M.1:6 of

30 required thickness. Cement joints and pointing as specified with polishing (with oxalic acid) 5258 Sq.M

curing, with water and kerosene as directed for at least 15 days or up to the satisfaction of the

Architect & Engineer in charge etc. complete

75.7 Providing and laying water proofing treatment with china mosaic tiles flooring over avg 40 mm

C.C. 1:2:4 {1 Cement : 2 sand : 4 Kapachi / Grit 6 to 12 mm size} bedding for maintaining slope

for plain and curve surface & 12 mm to 20 mm of broken piece of ceramic / glazed tiles ( one

for more color as directed ) to be laid over cement mortar bedding of C M 1:3 (1 cement : 3 sand

) contain one Kg of water proofing materials per bag of O P C at plain or / and slops and to be

31 tempered to bring mortar ceramic up to surface with using white cement and colour pigment 1073.44 Sq.M

including rounding of junctions and extending them up to 15 cm along the wall and curing with

bends any patterns or design as per drawing and cleaning by using oxalic acid etc complete.

{SOR Code. 14015AA + 14035}

Applying two coats of acrylic lappy (putty) and two coats of primer of approved brand

manufacture on new wall surface to give an even shade including thoroughly brushing the surface

free from mortar dropping and other foreign matter and sand papered smooth.

{S.O.R. It. Code.. 19032}

Providing and fixing window having extruded aluminum Colour anodized section frame main

outer size 95mm x 24mm x 1.17mm (of Jindal Section no:2459 @ wt.of 0.738 Kg/mt),

75 horizontal Three track member size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@

Wt.1.07 Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal Section

no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member size 40 mmx18mm

33 x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 40mm x 1568.27 Sq.M

18mm x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent

bronze colour tinted float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

{SOR It. Code. 11027}

Providing and fixing window having extruded aluminum Colour anodized section frame main

outer size size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg / Rmt),

19 horizontal Two track member size 61.85 mm x 31.75 mm x 1.20mm (of Jindal Section no:

@ wt.of 0.695 Kg/mt), vertical member of size 61.85 mm x 31.75mm x 1.30 mm (of Jindal

Section no:8758 @ wt.of 0.0.659 Kg/mt)with sliding shutters of horizontal member size

34 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of 0.456 Kg/mt), vertical member of size 1696.73 Sq.M

40mm x 18mm x 1.29 mm (of Jindal Section no:8948 @ wt.of 0.457Kg/mt/ with 5 mm thick

transparent bronze colour tinted float glass with anodized aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

{SOR It. Code.11028 }

Providing and fixing standared extruded of alluminium section of size 63.50 x 38.10 x 1.95 mm

(of Jindal Section no:4605, @ Wt 1.094Kg / Rmt with colour Powder Coated alluminium frame

with 5 mm thick transparent bronze colour tinted float glass with colour anodized alluminium

frame for ventilation with 5 mm thick frosted glass as details etc complete for.window

{ SOR It. Code. 11029}

Finishing wall with weather proof exterior emulsion paint on wall surface (two coat) to give an

1097.76 required shape even shade after thriughly brushing the surface to remove all dirt,and remains

of loose powdered materials etc.complete

(S.O.R CODE-19031)

Providing & Applying two coats

4447.31 of plastic emulsion paint of desired shade, of approved make, brand and manufacture, on any

37 surface, at all heights, to give an even shade, including thoroughly brushing the surface free 87.51 Sq.M

frommortar droppings and and other foreign matter and sand papered smooth.

(S.O.R Code 18031)

Providing and fixing 30 mm thick FACTORY MADE SOLID BOTH SIDE PRELAM WPC

11 DOOR SHUTTER density 550 kg/cu.mt , weight 1.55 to 1.60 / sq.ft complete as per direction of

38 Engineering in charge manufacture's specification and drawing. 2370 Sq.M

Items Total amount according

Items Total amount according

estimated out Item of work Tendered Rates Unit to estimated quantities

Providing and fixing PUF insulated continueous sandwich panels for roofs of total thickness not

less than 30 mm made out from continue line method.Panel shall have 0.5 mm thick pre coted gi

sheet both side of polyurethane foam with external face being corrugated in shape for gi andf pu

foam both material the crest height for the panel shall be 35 mm minimum with 250mm c/c pitch

the precoted sheet shall be of minimum 240 mpa steel grade confirmim=ng to is 14246:1995 and

shall have zinc coating of 120 gsm as per is 277,5-7 microne epoxy primer on both the side of the

sheet and polyster top coat 15-18 microne the PPGI sheet shall bhave protective guard film of

minimum 25 microne to avoid scratches wihile transportation the roof panel are laid over a frame

39 work of trusses coloumns and purlines fixed using 900 mm self drilling bolt with rubber washer 4000

including all type of fluushing PU foam sheet must be self extiguishing fire retardant type having

minimum density of 40 kg/cumt (+,-2 kgs)including 0.25 mm craft paper edging selg tapping

screws of required length and nos.etc.complete as per structural design and direction of engineer

in charge Steel work, welded in built up sections framed work including cutting, hoisting, fixing

in position and applying a priming coat of read lead paint.

(D) In trussses and trussed purlins, upto 25 M. span and 15 M. ovarall height. Market Rate

Supplying fabricating, erecting, aligning & fixing in proper position 304 S.S 16 gauge hollow

100.59 steel, 0.05 m and 0.19 m (2” and ¾ ”) dia combination for railing etc. complete at site. Rate shall

include for supplying all materials such as ISI mark welding rods, bolts, nuts, etc and like labor

40 for the work of straightening, cutting, drilling holes, necessary plants / equipments for 1800 Rmt

assembling, bolting welding, erecting, etc. complete as directed. Measurement of steel railing

shall be in Rmt and hight of the railing will be 0.75 m.

TOTAL FOR CIVIL WORK

WATER SUPPLY PLUMBING & SANITARY FITTING

Quantities Total amount

Quantities Total amount

estimated Item of work Tendered Rates Unit according to

out or less estimated quantities

WATER SUPPLY PLUMBING & SANITARY FITTING:-

PART-A:- WATER SUPPLY PLUMBING & SANITARY FITTING:- Providing and fixing

water closet squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot

1 1 reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long pattern = 1023.91 No

White colour SOR CODE-23009

Providing and fixing wsh down water closet (European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and

2 10 cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour 881.01 No

Providing and fixing 100mm size P or S trap for water closet squatting pan including jointing the

3 13 trap with the pan and soil pipe in cement Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous China. 199.03 No

Providing and fixing in Cement Mortar 1:3 (1-Cement : 3-coarse sand)a, pair of white vitreous

China 250mm x 130mm x 30mm footrest to long pattern squatting pan water closet.

Providing and fixing 12.5 Litres low level flushing cistern with a pair, of C.I. or Mild brackets,

complete with fittings such as lead valve less syphon, 15mm nom.nal size brass ball valve with

polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and

5 1 overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and 2346.92 No

making good the same connecting the flush bend with cistern and closet (overflow pipe to be

measured and paid for separately)(A) Vitreous China (I) In white colour SOR CODE -23013

Providing and fixing 12.5 Litres high level C..I. flushing cistern with A pair of C.I. or Mild steel

brackets, womplete with fittings such as syplionic arrangement, 15mm nominal size brass ball

6 1 valve with polythene float, lever G.I. China (60 cm. ) and pull union and couplings for 1564.63 No

connections with inlet, outlet and overflow pipes etc. including cutting holes in walls and making

good the same (overflow pipe to be measured and paid fo separately ) SOR CODE -23014

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good the same but excluding fittings.(A) Vitreous

China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. SOR CODE-23018

Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white including cutting

8 1 holes in walls and making good the same but excluding fittings. (C) Vitreous China Sink.(i) 2303.62 No

600mm x 450mm x 150mm size SOR CODE -23019

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mmdia. SOR CODE -

1 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia SOR CODE- 88.94 Each

20 Providing and fixing 100mm sand cast iron grating for gully, floor or Nahni trap. SOR CODE - 36.61 Each

7 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. 279.37 Each

Each SOR CODE -23023

14 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap 184.98 Each

polished bright. (ii) 20mm dia. SOR CODE -23028A1

14 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, 351.18 Each

14 shanks and back nuts. (ii) 20mm dia. SOR CODE-23029B

Items Total amount according

Items Total amount according

estimated out Item of work Tendered Rates Unit to estimated quantities

14 Providing and fixing brass screw down stop tap.(A) 15mm dia. SOR CODE -23030A 203.79 Each

1 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia. 184.98 Each

16 SOR CODE-23031A

1 Providing and fixing Gun metal check or non-return fullway wheel valve.(B) 20mm dia. 201.8 Each

SOR CODE-23031B

1 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. SOR 416.47 Each

18 CODE -23031C

1 Providing and fixing chromium plated brass half trun flush cock of approved quality 252.26 Each

19 including fixing in pipe line etc. complete.(i) 20mm dia. SOR CODE-23032A

10 Providing and fixing chromium plated brass half trun flush cock of approved quality 261.16 Each

20 including fixing in pipe line etc. complete.(ii) 25mm dia.SOR CODE-23032B

4 Providing and fixing Urinal of approved quality including connection with trap and with 1689.19 Each

21 integral longitudinal flush pipe.(A) Squating plate pattern white earthenware 550mm x

300mm. SOR CODE-23034

14 Providing and fixing chromium plated, bottle trap with necessary couplings of approved 292.87 Each

22 quality for wash basin. SOR CODE-23036

1 Providing and fixing ball cock of approved. quality as directed.(A) Copper Metal (i) 131.57 Each

23 25mm dia. SOR CODE -23037A1

100 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE 168.67 Rmt

having National Sanitation Foundation (NSF) seal for potable water of following dia.

24 nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.

complete.[A] 15 mm. SOR CODE-23055

100 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE 206.76 Rmt

having National Sanitation Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.

complete. [B] 20 mm. SOR CODE-23056

100 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE 251.31 Rmt

having National Sanitation Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.

complete. [C] 25 mm. SOR COODE-23057

100 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE 334.89 Rmt

having National Sanitation Foundation (NSF) seal for potable water of following dia.

nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.

complete. [D] 32mm. SOR CODE-23058

100 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for 71.93 Rmt

cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

28 at every two metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials. SOR CODE-23061

100 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for 90.93 Rmt

cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

29 at every two metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials. SOR CODE-23062

100 Providing laying and jointing in true line and level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for 117.97 Rmt

cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

30 at every two metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials. SOR CODE-23063

100 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for 146.65 Rmt

cold water including fittings make PRINCE / SUPREME / ASTRAL / FINOLEX or equivalent

as approved by Engineer In Charge. Pipe shall be fixed on the wall with the help of clamp

31 at every two metre C/C or shall be concelled as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive solvent, including

cost of all materials. SOR CODE-23064

20 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali of 595.98 each

the following nominal diameter of self cleansing design with C.I scread down or hinged

32 grating including the cost of cutting and making good the walls. SOR CODE-23069

Items Total amount according

Items Total amount according

estimated out Item of work Tendered Rates Unit to estimated quantities

10 Providing and fixing white vitreous china extended wall mounted water closet 12500 No.

(European type) of size 370 x 535 x 405 mm of approved shape including providing and

fixing white vitreous china cistern with dual flush fitting of flushing capacity 3 litter/

litter, including seat and lid, fittings & C.I.brackets, 40 mm flush bend, overflow

arrangement with specials of standard make and mosquito proof coupling of

33 approved design complete, including chair brackets, nuts, rag bolts, painting of

fittings and brackets, cutting and making good the walls and floors wherever

required. Wall mounted water closet of Jaquar : CNS-WHT-959NN Concealed Cistern:

JCS-WHT-2400 & Dual Flush Plate Cat. No.: JCP-CHR-152415, Health Faucet ALD-CHR-

573 or Equivalent approved Make . ( Cera/ Jauar/Hindware/Parryware or Eq. Make)

10 Providing & fixing of first quality white vitreous china Oval type Wash basin as per 5500 No.

product detail, including specially fabricated C.I. brackets with studs painted with

two or three coats of enamel paint of approved shade over a coat of primer complete

including filling gap between counter and wash basin with approved sanitary grade

material, cutting & making good the walls where required to the complete

34 satisfaction of the Engineer in Charge. Oval Wash Basin of Jaquar - FLS-WHT-5701;

Rag Bolts for Wash Basins, Bottle Trap: Jaquar ALD-769L300x190, Waste Coupling:

Jaquar: Cat. No.: ALD-705, Prismatic Pillar Cock: Jaquar PRS-031 or Equivalent approved

Make . ( Cera/ Jauar/Hindware/Parryware or Eq. Make)MARKET RATE

10 Providing & fixing of first quality white vitreous china Wash basin as per product 5500 No.

detail, including specially fabricated C.I. brackets with studs painted with two or

three coats of enamel paint of approved shade over a coat of primer complete including

filling gap between counter and wash basin with approved sanitary grade material, cutting

& making good the walls where required to the complete satisfaction of the Engineer in

Charge. Wash Basin CNS-WHT-811; Rag Bolts for Wash Basins, Bottle Trap: Jaquar

ALD- 769L300x190, Waste Coupling: Jaquar: Cat. No.: ALD-705, Prismatic Pillar

Cock: Jaquar PRS-031 or Equivalent approved Make . ( Cera/

Jauar/Hindware/Parryware or Eq. Make)MARKET RATE

4 Providing and fixing white vitreous china flat back urinal of approx. size 375 x 315 x 7500 No.

620mm having water inlet & outlet from back side, including fixing to wall with

suitable brackets all as per manufacturers specification and direction of Engineer-in-

charge. Urinal: Jaquar Make URS-WHT-13253O, Urinal Flush

PRS-073 or Equivalent approved Make . ( Cera/ Jauar/Hindware/Parryware or Eq.

Make)MARKET RATE

2 Providing and fixing of Jaquar Urinal Partition (Model no.- 1810-UC /1810-US) made 3500 No.

of 8mm colour chrome Toughened Glass & Frosted in Curved Shaped height 900 mm

width 450mm or equivalent make including all necessary fitting to be fixed by drilling

37 holes with Brass bracket in Chrome finish all

Complete as per drawing and directed by engineer-In-Charge. ( Cera/

Jauar/Hindware/Parryware or Eq. Make) MARKET RATE

9 Providing & fixing Single Lever concealed Diver with Over head wall Shower and Spout 9500 No.

38 Assembly, ( Cera/ Jauar/Hindware/Parryware or Eq. Make)MARKET RATE

10 Providing & fixing of Health faucet with Angular Cock Assembly( Cera/ 2500 No.

39 Jauar/Hindware/Parryware or Eq. Make)MARKET RATE

1 Making holes upto 50mm dia. 300mm long in any RCC members by diamond Core Cutting 483 No.

machine of HILTI or equivalent including disposing the debries,all works refinishing of the

40 GP-2 pipe grout complete with water proof testing etc completed as directed by

E.T.C/PMC .MARKET RATE

1 Making holes upto 100mm dia. 300mm long in any RCC members by diamond Core Cutting 598 No.

machine of HILTI or equivalent including disposing the debries,all works refinishing of the

41 GP-2 pipe grout complete with water proof testing etc completed as directed by

E.T.C/PMC ..MARKET RATE

1 Making holes upto 150mm dia. 300mm long in any RCC members by diamond Core Cutting 748 No.

machine of HILTI or equivalent including disposing the debries all works refinishing of the

GP-2 pipe grout complete with water proof testing etc completed as directed by

E.T.C/PMC .MARKET RATE

TOTAL FOR A : TOILET PLUMBING SANITARY/ WATER SUPPLY & DRAINAGE

(B)DRAINAGE & SEWERAGE & RAIN DRAIN ITEM:-

100 Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-Graded stone 125.9 Rmt

aggregate 40mm nominal size) bedding for stoneware pipes of following internal

diameters with necessary formwork and curing complete.(A) 100 mm dia. (112 mm

Ave.bed thickness) SOR CODE-24002A

100 Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-Graded stone 211.59 Rmt

aggregate 40mm nominal size) bedding for stoneware pipes of following internal

diameters with necessary formwork and curing complete.(B) 150mm dia. (166mm Ave.

bed thickness) SOR CODE-24002B

1 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water 1279.4 Each

tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps. (A) 100mm x 100mm size P type. (upto 10 ton) SOR CODE-24006AA

4 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water 1234.57 Each

tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type SOR CODE-24006B

Items Total amount according

Items Total amount according

estimated out Item of work Tendered Rates Unit to estimated quantities

1 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non- 254.6 Rmt

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends

47 prepared for collar joints including testing of joints complete.(B) 150mm (upto 10 ton)

SOR CODE-24007BA

1 Providing laying (to level or slopes) and jointing reinforced concrete Light duty non- 356.22 Rmt

pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends

prepared for collar joints including testing of joints complete.(C) 250mm (upto 10 ton) SOR

1 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded 10933.41 Each

stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse

sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5

(1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm

nominal size) finished smooth complete including curing and festing (i) Inside size 900mm

49 x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total

weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame

64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength

not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (1) A

type depth 0.90 Metre for 150mm diameter sewer.

SOR CODE-24008A

1 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded 19158.05 Each

stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse

sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5

(1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm

nominal size) finished smooth complete including curing and festing (i) Inside size 900mm

50 x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total

weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame

64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength

not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2) B

type depth 1.50 Metre for 150mm diameter sewer.

SOR CODE-24008B

1 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse sand : 4-graded 23238.1 Each

stone aggregate 20mm nominal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse

sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5

(1-Cement : 5-coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm

nominal size) finished smooth complete including curing and festing (i) Inside size 900mm

51 x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total

weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and Wt. of frame

64 Kg.)(A) With 230mm thick walls of brick msonry using brick having crushing strength

not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (3) C

type depth 2.25 Metre for 150mm diameter sewer.

SOR CODE-24008C

1 Providing and fixing cast iron steps of size 500mm x 150mm x 22.5mm and painting with 205.6 Each

two coats of Anti-corrosive paint etc. complete. SOR CODE-24010

1 Supplying and fixing C.I. cover 300mm x 300mm without frame for Gulley trap (Standard 492.22 Each

53 pattern) te weight of cover to be not less 4.53 Kg.) (upto 10 ton) SOR CODE-24011A

1 Constructing Brick masonry road gully chamber 500mm x 450mm x 600mm including 1997.22 Each

54 500mm x 450mm C.I. horizontal grating wih frame complete. (upto 10 ton) SOR CODE-

1 Constructing Brick masonry road gully chamber 450mm x 450mm x 775mm with vertical 2520.65 Each

55 gating complete. SOR CODE-24014

1 Constructing brick masonry road gully chamber 1100mm x 775mm including 500mm x 8680.45 Each

56 450mm (C.I. horizontal grating with frame and vertical grating complete.) (upto 10 ton)

SOR CODE-24015A

1 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends 2903.89 Each

with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame

to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

57 with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(i)

Inside dimensions 455mmx 610mm and 450mm deep for single pipe line. (upto 10 ton)

SOR CODE-24016AA

1 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends 3624.91 Each

with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame

to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

59 with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(ii)

Inside dimensions 500mm x 700 mm and 450mm deep for pipe line with one or two

inlets. (upto 10 ton) SOR CODE-24016BA

Items Total amount according

Items Total amount according

estimated out Item of work Tendered Rates Unit to estimated quantities

1 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends 7109.35 Each

with briocks having croshing strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame

to be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe

60 with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished

smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(iii)

Inside dimensions 600mm x mm and 450mm deep for pipe lines with three or more

inlets. (upto 10 ton) SOR CODE-24016CA

1 Extra over items 24.44 for every additional depth of 0.1M. of part thereof beyond 450mm 239.99 Each

depth for Brick masonry chamber.(i) for 455mm x 610mm size. SOR CODE-24017A

TOTAL FOR B : EXTERNAL SEWER DRAINAGE & RAIN DRAIN WORKS

TOTAL AMOUNT FOR PLUMBING WORKS ( A+B)

TOTAL AMOUNT FOR PLUMBING WORKS ( A+B)

ELECRICAL INTERNAL

Point wiring for Light / Fan/ Bell/ Primary Point with 2-1.5 sq. mm & earth wire of

sq. mm (green) both are of ISI marked 1.1 kv grade FRLS PVC insulated multi strand

copper wires upto max length of 10 mt, in below type of pipe erected with 6A Tissino

(1-1-1) Type ISI marked flush type switch / bell push and accessories erected on Metal /

PVC/Wooden Box covered with 3 mm thick PC(Polycarbonate) /Acrylic/Laminated

sheet. with necessary Lamp holder/ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

(1-1-2) Point wiring for independent PLUG with following size mains earth wire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires upto 10 mt length, in following below of pipe erected complete with ISI

(1-1-2) marked 3 / 5 Pin socket and tissino type switch erected with earth continuity connection

erected on Metal / PVC/Wooden box covered with 3 mm thick PC(Polycarbonate) /

Acrylic/Laminated sheet.

[A] For 6 amp plug and 6 amp switch with 2-1.5 sq. mm Cu. Mains from near by

switchboard/db board upto 6 mt.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

[B] 6/16A Plug and 16 amp switch with 2-2.5 sq. mm Cu. Mains from mcb d b boards.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

25 complete 489.00 PT.

[C] 6/16A Plug and 16 A switch with 2-4 sq.mm Cu. Mains with 2.5 sq.mm ( green)

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

5 complete 601.00 PT.

Point wiring for on board looped PLUG with tissino type single pole ISI marked Switch

and Socket erected with necessary connections erected on wooden /Metal/ PVC Box

(1-1-3) covered with 3 mm thick PC(Polycarbonate) /Acrylic sheet for open / concealed wiring

for following size.

10 [A] For 6 Amp. 66.00 PT.

10 [B] For 16 Amp. 162.00 PT.

Point wiring for Tissino / Modular secondary light point with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires, in below type of pipe to be erected complete with earth continuity

(1-1-4) and necessary connection with primary light with accessories erected on Metal / PVC /

wooden box covered with 3 mm thick PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as

Note:- Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in following type of pipe to be erected concealed in /

(1-1-5) flushed on wall / ceiling complete with 6A Tissino Type ISI marked accessories with

earth continuity erected on Metal/PVC//Wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet. with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

Section - 1-2 Point wiring in Copper

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

mtr length , in below type of pipe erected with 6A Modular type switch / bell push &

accessories and earth continuity of following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

Items Total amount according

Items Total amount according

estimated out Item of work Tendered Rates Unit to estimated quantities

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

50.00 Cat. III 445.00 PT,

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected with 6A Modular type switch and hum free EME

step type electronic fan regulator mounted and accessories with earth continuity of

following type erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured/metallic/white front plate modules erected on / in wall / ceiling as

per pipe erected. with necessary ceiling rose / H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

50 Cat. III 632.00 PT.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

(1-2-3) length, in below type of pipe erected complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

25 Cat. III 471.00 PT.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

20 Cat. III 704.00 PT.

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green)

(III) earthing wire from mcb d b board.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

Cat. III 829.00 PT.

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with following

type accessories

20 Cat. III 255.00 PT.

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of

sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires erected in below type of pipe with 6A Modular type switches and following

(1-2-5) type of accessories erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate modules erected on / in wall /

ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or

H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed on wall/ceiling

10 Cat. III 562.00 PT.

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured / metallic/white

(1-2-6) front plate , modules erected with necessary connections as per site situation directed

by Engineer In charge. (ANCHOR,MK,ROMA)

(1)One No. SP 6 Amp.

20 Cat.III 150.00 Ea.

(2) One No 5 pin plug

5 Cat.III 150.00 Ea.

(3) Two Pin/RJ-11 Telephone Socket

[A] For One Gang

5 Cat. III 159.00 Ea.

[B] For Two Gang

5 Cat. III 208.00 Ea.

(4) TV Co-axial Socket outlet

10 Cat. III 159.00 Ea.

(5) Electronic hum Free steps EME Fan regulator

50 Cat. III 395.00 Ea.

(6) Fuse units 10Amp. or 16 Amp.

10 Cat. III 179.00 Ea.

(7) Blank Plate Single

25 Cat. III 25.00 Ea.

(8) Computer RJ-45 socket

10 Cat. III 259.00 Ea.

(9) 16 Amp. SP one way switch

20 Cat. III 179.00 Ea.

Items Total amount according

Items Total amount according

estimated out Item of work Tendered Rates Unit to estimated quantities

(10) 6/16Amp. Universal socket

20 Cat. III 198.00 Ea.

(11) 6 Amps. Bell Push

10 Cat. III 150.00 Ea.

(12) 6Amp. / 16 Amp. Two Way switch

10 Cat. III 169.00 Ea.

(13) 6A/10A/16A/20A/25A/32A Single pole Modular MCB Switch

25 Cat. III 307.00 Ea.

(14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A Double Pole Modular MCB Switch

25 Cat. III 606.00 Ea.

(15) 32 Amps. DP switch with Indicator

25 Cat. III 606.00 Ea.

Providing & erecting following type of Modular Type Accessories with necessary

(1-2-7) connection. As desired by Engineer In charge

100 (1) 6 Amp. SP one way switch 27.00 Ea.

25 (3) 6/16Amp. Universal socket 82.00 Ea.

25 (4) 6 A socket 42.00 Ea.

5 (5) LAN cable connector with ferule 36.00 Ea.

Section 1-4 Mains & Wires

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

500 (a) 2 wire 1.5 sq. mm 62.00 Mtr.

200 (b) 2 wire 2.5 sq. mm 82.00 Mtr.

200 (c) 3 wire 1.5 sq. mm 82.00 Mtr.

200 (d) 3 wire 2.5 sq. mm 101.00 Mtr.

100 (e) 4 wire 1.5 sq. mm 90.00 Mtr.

100 (f) 4 wire 2.5 sq. mm 125.00 Mtr.

100 (g) 6 wire 2.5 sq. mm 170.00 Mtr.

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

(1-4-2) ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green

colour for earth continuity of following size

(A) with medium class Rigid PVC pipe and accessories

25 (a) 2 wire 4 sq. mm 111.00 Mtr.

25 (b) 2 wire 6 sq. mm 146.00 Mtr.

(c) 2 wire 10 sq. mm

25 (use earth wire of 4 sq.mm )

25 (d) 3 wire 4 sq. mm 141.00 Mtr.

25 (e) 3 wire 6 sq. mm 199.00 Mtr.

(f) 3 wire 10 sq. mm

25 (use earth wire of 4 sq.mm ) 322.00 Mtr.

25 (g) 4 wire 4 sq. mm 179.00 Mtr.

25 (h) 4 wire 6 sq. mm 258.00 Mtr.

(i) 4 wire 10 sq. mm

25 (use earth wire of 4 sq.mm ) 421.00 Mtr.

Providing & Erecting approved make following size of TV Co-axial flexible cable

comprising inner conductor of solid bare copper insulated with Foam PE & Secondary

(1-4-6) conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage

overall sheathed with black PVC insulation.

Supplying & erecting approved make Telephone Cable electrolytic copper conductor

PE insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with

(1-4-7) FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT

erected in existing pipe. of following size of conductors & nos.of pairs. With necessary

[A] Conductor Size 0.5 mm

100 (3) Three Pairs 20.00 Mtr.

(1-4-8) 88 [E] CAT - 6 shielded 94.00 Mtr.

Section 1-5 Concealed Boxes & Laminated Sheets

Supplying & erecting M.S. Box having 16 Gauge painted with red oxide or Heavy duty

(1-5-1) PVC box erected flushed on wall or concealed in wall with necessary plastering &

finishing as directed of following size.

Items Total amount according

Items Total amount according

estimated out Item of work Tendered Rates Unit to estimated quantities

Providing & Erecting 3mm thick Polycarbonate (PC) sheet with grooving as directed

Supplying, Erecting, Testing & Commissioning the passenger / stretcher lift as per

prevailing IS code having following main features:[1] GEAR LESS LIFT DRIVE

comprising of High Starting torque Lift duty 3 phase 440 V A. C. Permanent magnetic

synchronous motor of proper rating with high efficiency shall be used.

[2] Micro processor based / PLC, ACVVF, vector control drive with encoder feedback

closed loop system shall be used for lift car and door operation which shall be full

collective selective operation hall call demand response, UP/DOWN hall stops, Main,

Up/ Down Contactor with overload and phase reversal relay and safety controls.[3] Car

with M S platform with bracings of adequate size and to sustain the impact load cabin +

passenger with safety factor of fire for steel and side panels of Stainless steel of sheet

of grade 304 duty. Car ceiling will be S.S. finishes with aesthetic appearance with LED

1 ceiling lights. Car flooring shall be of anti skid PVC with choice of colour of engineer in 10,00,000.00 Ea.

charge. Car doors shall be of stainless steel grade 304, hairline finish with centre

opening / telescopic automatic doors. Car panel will also be S.S. 304 finished with

emergency stop device, mechanical door safety device, facility of auto/ attended mode.

All car panel buttons and all floor switches must be with brail language as per lift act.[4]

All landing doors shall be fully automatic centre opening/ telescopic opening made of

hairline finish steel grade of 304 with key holes and infrared curtains with Unlocking

facility from outside.

[5] Appropriate battery operated emergency light in the car along with alarm switch shall

[6] Digital scrolling indicator system for up-down arrow along with floor position indicator

shall be provided inside the car and at all floors.

[7] Full height infra red curtain with multiple criss / crossing light beams shall be TOTAL

TOTAL TENDER AMOUNT

(A) CIVIL ESTIMATE

(B) WATER SUPPLY PLUMBING & SANITARY FITTING

(C)DRAINAGE & SEWERAGE & RAIN DRAIN ITEM

(D)ELECRICAL INTERNAL