Composite tender for various works of W.S.Scheme fruit Mandi under DCW

Amount

Earth work in excavation by manual means over areas (exceeding 30cm and up[to 1.5mtr in depth, 1.5mtr in width as well as 10 sqm on plan) including disposal of excavated earth upto 1mtr from cutting edge disposal earth to be levelled and neatly dressed . All kinds of soil

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc not exceeding 1.5mtr in width and for shafts wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5mtr. All kinds of soil

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50meters: All kinds of soil

Extra for every additional lift of 1.5 mtr. or part thereof in all kinds of soil

Providing and laying stone soling hand packed on level incld. cost of stones & incld. all carriages

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level. 1 : 4: 8 (1 cement ; 2 coarse sand : 4 graded stone agg. 20mm nominal size). incld. all carriages

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level. 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone agg. 20mm nominal size) incld. all carriages

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level. 1 : 1.5 : 3 (1 cement ; 1.5 coarse sand : 3 graded stone agg. 20mm nominal size) incld. all carriages

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc upto floor five level excluding cost of centering, shuttering finishing and reinforcement 1 : 1.5 : 3 ( 1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size) incld. all carriages

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete (T.M.T bars) incld. all carraiges

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) Crushed. incld. all carriages

Centering and shuttering including straightening propping etc, and removal of form work for: Foundations, footing, bases of columns etc for mass concrete

Centering and shuttering including straightening propping etc, and removal of form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including straightening propping etc, and removal of form work for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses

Centering and shuttering including straightening propping etc, and removal of form work for: Suspended floors, roofs, landings, balconies and access plate form

Centring and shuttering including strutting, propping etc and removal of form for: Edges of slabs and breaks in floors and walls under 20cm wide

Centering and shuttering including straightening propping etc, and removal of form work for: Arches, domes valuts upto 6m span

Extra for Domes exceeding 6m span

Extra for R.C.C work in super structure above floor V level for each floor or part thereof.

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc including cost of de-shuttering and decentring at all levels, over a height of 3.5m, for every additional height of 1metres or part thereof (Plan area to be measured). Suspended floors, roofs, landing, beams and balconies (plan area to be measured

Extra for shuttering In circuilar work (20 % of respective centring and shuttering items): Suspended floor

Extra for providing and mixing water proofing material

Providing and fixing tie bolt, spring coil and plastic cone in wall shuttering complete as per the direction of Engineer-in-Charge. 20 mm dia and 300 mm length incld. all carriages

Providing and fixing of double flanged C.I sluice valve with extension rods upto working plateform conforming to I.S 780 of 1984 standard make kirlosker PNI type incl. cost of nuts, bolts, R.I cloth all sorts of carriages upto site of work, cost of tail pieces all leads etc complete job. 80mm dia

Providing and fixing of double flanged C.I sluice valve with extension rods upto working plateform conforming to I.S 780 of 1984 standard make kirlosker PNI type incl. cost of nuts, bolts, R.I cloth all sorts of carriages upto site of work, cost of tail pieces all leads etc complete job. 100mm dia

Providing and fixing of double flanged C.I sluice valve with extension rods upto working plateform conforming to I.S 780 of 1984 standard make kirlosker PNI type incl. cost of nuts, bolts, R.I cloth all sorts of carriages upto site of work, cost of tail pieces all leads etc complete job. 150mm dia

Providing and fixing of double flanged C.I sluice valve with extension rods upto working plateform conforming to I.S 780 of 1984 standard make kirlosker PNI type incl. cost of nuts, bolts, R.I cloth all sorts of carriages upto site of work, cost of tail pieces all leads etc complete job. 200mm dia

12mm cement plaster of mix 1 : 4 (1 cement : 4 fine sand) incld. all carriages

Providing, fabrication of M.S lid of size 0.75x0.75 Mtr with frame made out of angle iron 40x5 with M.S sheet covering of 3mm thick including locking arrangements complete the jing two coats of approval paint over zinc chromate primer

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like

Extra for shuttering In circuilar work (20 % of respective centring and shuttering items): Foundations, footing, bases of columns etc for mass concrete

Extra for shuttering In circuilar work (20 % of respective centring and shuttering items): Walls (any thickness) including attached pilasters, buttresses, plinth and string courses

Extra for shuttering In circuilar work (20 % of respective centring and shuttering items): Lintels, beams, plinth beams, girders, bressumers and cantilevers

Brick work with common burnt clay F.P.S (non-modualar) bricks of class designation 75 in foundation and plinth in : Cement mortar 1 : 4 mix (1 cement : 4 fine sand) incld. all carriages

Extra for brick work in super structure above plinth level upto floor V level (by manual means) incld. all carriages

15mm cement plaster on the rough side of single or half brick wall of mix : 1 : 6 (1 cement : 6 fine sand) incld. all carriages

12mm cement plaster of mix 1 : 3 (1 cement : 3 fine sand) incld. all carriages

Finishing walls with water proofing cement paint of approved brand and manufactured of required shade to give an even shade new work(two or more coats) applied @3.84kg/10sqm

Structural steel work in single section fixed with connecting plate for truss work incld. cutting, hoisting, fixing in position and applying a priming coat of red oxide steel primer

Providing and incorporating during concreating G.P strip water seal 0.63mm nominal thick at construction joint as per proper specification and instruction of Engineer incharge complete job incld. all carriages

Providing G.S sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50mm thick with zinc coating not less than 275gm/m2

Providing and fixing of G.S sheet lumps 600mm long incld. Cost of J & L hooks complete job i

Providing and fixing of Eaves boarding of 200mm wide coloured including cost of holders, angle supports complete job & incld. all carriages

Providing and fixing of soffit boarding ornamental complete job & incld. all carriages

Supplying and fixing rolling shutters of approved make, made of required size M.S laths inter locked together through their length and jointed together at the end by locks mounted on specially designed pipe shaft with brackets, side complate job

Providing and fixing ball bearing for rolling shutters complete incld. all carriages

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): second class kail wood .

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S, pressed butt hinges bright finished of required size with necessary screws. First class kail wood

Providing and fixing wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both directions with wire of dia 0.63mm for doors, windows and clerestory windows with ISI marked M.S pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer incharge. First class kail wood.

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with: 5.0mm thick glass panes

Painting with synthetic enamel paint of approved brand and manufacture to give and even shade.Two or more coats on new work over an under coat of suitable shade with ordinary paint

Supply, fabrication and fixing in position M.S edge cutter with M.S anchorage incld. welding and making provisions for fixing of reinforcement of well curbs as per approved drawings and technical specification and as per the instructions of Engineer incharge complete job incld. all carriages

Sinking of well through all types of soil complete as per drawings and technical specification having inner dia 4.50Mtrs and outer dia 5.10 Mtr by way of making of plate form over well with loading/unloading of sand filled bags for required number of casting and engagement of skilled well sinker/Asstt. well sinker to a required depth as per the site condition and removal of the plate form as per the instruction of the Engineer's incharge complete job incld. all carriages

Construction of ring bund for construction of Intake channel/Sump incld. cost of E.C bags filled with earth/sand including excavating earth/Sand from barrow pits, filling in E.C bags, sewing, stitching, cost of empty cement bags placing in position in all conditions, in or under water. The job includes all types of carriages, leads and lifts and removing of the same all inclusive Complete job.incld. all carriages

Reinforced cement concrete work in chimneys, shafts upto floor five level including curing complete but excluding the cost of centring, shuttering, finishing and reinforcement with: 1 : 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) .incld all carriages

Providing and fixing hand rail of approved size by welding etc to steel ladder railing, balcony railing and stair case railing and similar work including applying a priming coat of approved steel primer. M.S tube (medium) 40mm nominal bore

Providing and fixing of 2mm M.s sheet boarding incld. supports etc complete job incld. all carriages

Providing and fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc complete 125 mm

Providing and fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete 100 x 10m

Boring, providing and installing bored cast-in-situ reinforced cement concrete pile of specified diameter and length below the pile cap in M-20 cement concrete to carry a safe working load not less than specified , excluding the cost of steel reinforced but incld. the cost of boring with casing and or bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc all complete including removal of excavated earth with all lifts and leads (length of pile for payment shall be measured from top of shoe to the bottom of pile cap.)

Vertical load testing of piles in accordance with IS 2911 (PartIV) including installation of loading platform by Kentledge/Anchor pile method and preparation of pile head orconstruction of test cap and dismantling of test cap after test etc.complete as per specification & the direction of Engineer-in- Charge. 21.6.1 Single pile upto 50 to 100 tonne safe capacity. Initial test (Test Load 2.5 times the safe capacity M30

Vertical load testing of piles in accordance with IS 2911 (PartIV) including installation of loading platform by Kentledge/Anchor pile method and preparation of pile head orconstruction of test cap and dismantling of test cap after test etc.complete as per specification & the direction of Engineer-in- Charge. 21.6.1 Single pile upto 50 to 100 tonne safe capacity. Working Pile

Reinforced cement concrete work in arches, archibs, domes, vaults, shells, folded plate and roofs having slope more than 15º upto floor five level incld. curing but excld. The cost of centring, shuttering finishing and reinforcement with 1 cement : 1.5 coarse sand : 3 graded stone agg.) 20mm nominal size incld. all carriages

roviding and fixing gun metal non return valves of approved quality with all accessories complete job as per directions of Engineer incharge incld. all carriages. 200mm dia

roviding and fixing gun metal non return valves of approved quality with all accessories complete job as per directions of Engineer incharge incld. all carriages . 150mm dia

Providing and fixing of 25mm dia air valve of approved make incld. all sorts of accessories incld. all carriages complete job

Providing, laying and fixing /jointing (rich mix concrete) of spun pipe NP3 type including earthwork excavation of trenches as specified to withstand the traffic load including refilling by 2nd class sand and cost of pipe. The job includes all sorts of carriage upto site of work complete job (300mm dia D.I)

Munifacturing, providing fitting at site, testing, commissioning of 150mm dia M.S pipe made out of 6mm thick M.S sheet (avg. length of pipe 6 Mtrs duely welded end to end jointing (double layer welding). The job includes coating with metals /paints/warnish etc to prevent from rust all told complete job incld. all carriages

Munifacturing, providing fitting at site, testing, commissioning of 100mm dia M.S pipe made out of 6mm thick M.S sheet (avg. length of pipe 6 Mtrs duely welded end to end jointing (double layer welding). The job includes coating with metals /paints/warnish etc to prevent from rust all told complete job incld. all carriages

Manufacturing of M.S manifold made out of 5mm thick M.S 200mm pipe of 1.55mtr long both ends blinded/flanged including fixing of required dia nipples with flanges and making required dia holes for nipples/supply lines. The job includes all sorts of carriages, hire charges of Gen Set etc and priming coat of Zinc Chromate etc complete job incld. all carriages

Providing and laying S & S centrifugally Cast (spun) Ductile Iron pipes conforming to IS : 8329. 200mm dia Ductile Iron Class K - 7 pipes (200mm dia D.I)

Providing and laying S & S centrifugally Cast (spun) Ductile Iron pipes conforming to IS : 8329. 150mm dia Ductile Iron Class K - 7 pipes (150mm dia D.I)

Providing and fixing of G.I pipes complete with G.i fittings excluding trenching and refilling etc (external work). 80mm dia, nominal bore

Providing and fixing of G.I pipes complete with G.i fittings excluding trenching and refilling etc (external work). 40mm dia, nominal bore

Providing and fixing of G.I pipes complete with G.i fittings excluding trenching and refilling etc (external work). 20mm dia, nominal bore

Providing and fixing of D.I pipe specials incld. cost of rubber gaskets complete job 150mm x 80mm

Providing and fixing of D.I pipe specials incld. cost of rubber gaskets complete job 200mm x 150mm

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m