REPAIR REPLACEMENT OF FLOORING DADO PLINTH PROTECTION AND CERTAIN MISC B R WORK AT DAD MD ACCN AND OTM ACCN AT RAMGARH CANTT

Amount

Taking down chowkats or frames with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) etc including builders hardware etc complete all as specified & directed .

Taking down chowkhats or frames with shutter (without taking off shutter from the frames) of any description exceeding 1.5 Sqm but not exceeding 4.0 Sqm each, complete all as specified and directed by Engr-in-Charge .

Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each, and removing from site, complete all as specified and directed by Engr-In-Charge .

Taking down shutters of any description not exceeding 1.0 Sq m each, and removing from site, complete all as specified and directed by Engr-In-Charge .

S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engr-In-Charge .

S & F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS framed shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail &bottom rail on either side & as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS framed welded/sealed to stiles & rails with suitable PVC sheet beading & joined together with solvent cement complete all as fixing in the frame at site as per specification and drawing including 3 Nos stainless steel butt hinges 100 mm long for each door, complete all as specified and as directed.

S & F 35 mm thick, factory made, IInd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any number size of members), beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); kiln seasoned & chemically pressure treated etc complete all as specified and directed . Note:- (i)Glass / wire cloth shall be measured & paid separately. (ii) Sample of shutter in sample room of GE office.

S & F 30 mm thick, factory made, IInd class hard wood plain framed panelled door shutter (any number of panel) with lock rail and panel of 9 mm BWP commercial ply . The size of rail and stile as per IS : 1003 (part-I) kiln seasoned and chemically pressure treated complete all as specified and directed .

M&L for 18mm / 19mm thick interior grade pre-laminated particle board prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and as directed.

S & F 75 mm size butt hinges medium weight cold rolled stainless steel complete all as specified and directed .

S & F 100mm size hasp & staple, safety type aluminium anodised with mild steel hinge pin including bolt, to hinge plate and fixed with screws, complete all as specified and directed

Supply only wooden beads of size not exceeding 3 Sqcm of teak wood Ist class hard wood plain fillets.square, rectangular or triangular in section, clean sawn, secured with nails in cross section, plain or desiger for fixing of mosquito net jali complete all as directed by Engineer in Charge.

S&F bands, straps, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; hand made sliding bolts; clamps;hold fasts; wall ties; plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

M&L plain cement concrete 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) in for inserting hold fast of doors & window & similar work etc. including necessary form work complete all as specified and directed

S&F for 1.25 mm thick pressed steel frames of size 125mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed. Note: The quoted unit rate under this item shall deemed to be included one shop coat of primer.

S&F steel window with side hung shutters including projecting type hinges with steel handles and steel peg stay complete with glazing bars, dovetailed or welded with four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx) & two Nos mild steel tower bolt 150 mm long and one peg stay on each leaf complete all as specified and directed

S&F steel window with side hung shutters including projecting type hinges with steel handles and steel peg stay complete without glazing bars, dovetailed or welded with four Nos mild steel flat iron 25 mm X 3mm ,200 mm length (appx)& two Nos mild steel tower bolt 150 mm long and one peg stay on each leaf complete all as specified and directed

S & F for steel windows or ventilators, fixed type, with glazing bars complete including prepartion of new or previously untreated steel surface of any description , not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed.

S& F for Galvanised mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples windows complete all as specified and directed.

S& F in repair Galvanised mild steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples windows complete all as specified and directed.

Hacking out old broken glass(any thickness, size, quality or description) from wooden frames/steel frames, glazed with oil putty or fixed with beads complete all as specified and directed

M & L for 3mm thick plain sheet glass ordinary quality and glazing with oil putty not exceeding 0.50 Sqm in each pane,complete all as specified and as directed by Engr-in-Charge .

S&F 3.0 mm thick frosted glass pin headed type in squares/ rectangular not exceeding 0.5 Sqm in each pane glazing with oil putty or aluminium frame/shutters with rubber neoprene beading complete etc all as specified & directed.

S & F 100mm size butt hinges medium weight cold rolled stainless steel complete all as specified and directed .

S&F 200 mm aluminium anodised barrel tower bolt of extruded section complete all as specified & directed.

S&F 150 mm aluminium alloy handles of extruded section anodised complete all as specified & directed.

S & F 150 mm (overall length of cover plate) floor door stopper with rubber shoes aluminium alloy body and tongue, anodised,with hard drawn steel spring,fixed in floor complete all as specified and directed.

S&F 300mm long aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F mild steel 300 mm size ,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

S&F in repair mild steel 300 mm size ,ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed.

M & L for preparation of new wooden surface of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F in repair snack guard of size 35mmX5mm thick fixed with door shutter with nails/screw complete all as specified and directed.

S&F in repair 20 mm dia harrison curtain rod, anodised aluminium alloy with bracket etc.,complete all as specified and as directed by Engineer-in-Charge.

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf, 12cm wide with chromium plated bracket guard and railing 60cm long complete set complete all as specified and directed.

S&F in repair towel rail aluminium anodised towel rail , 20 mm dia ,D-type 600 mm long between flanges with bracket ,fixed with and including chromium plated brass screw & wooden /plastic cleats complete set all as specified and directed.

S & F in repair stainless steel kitchen sinks with drainage board made of stainless steel 1.00 mm thick sheet with plugs, washers & waste coupling and waste pipe, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm X 460 mm bowl size 410 mm X 352 mm X 178 mm including 40 mm bore PVC flexible waste/flush pipe 800mm long with socket fixed with sink brass waste coupling complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing the rubbish off the premises complete all as specified and directed.

M & L glazed ceramic coloured tiles of size 375 mm x 250 mm x 7mm/450 mm x 300 mm x7 mm thick ,as in dado/skirting etc ,set and jointed in neat cement slurry and pointed in colour cement to match the tiles ,over & including 10 mm thick rendering in cement plaster in CM (1:4), complete all as specified and directed.

M & L joint free non skid coloured ceramic tiles 7 to 8 mm thick (sqaure/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., over and including 15mm thick screed bed in cement mortar (1:6) set and jointed in neat cement slurry and pointed in coloured cement to match the existing surfaces, complete all as specified and directed.

M&L for Vitrified light coloured shed ceramic floor tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 Sqm, in floors etc, set & jointed in neat cement slurry and pointed in cloured cement to match the shade of tiles, over & including 15 mm thick screed bed in cement mortar (1:4) etc complete all as specified & directed.

M&L for Vitrified light shed ceramic tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 Sqm ,on vertical surface such as skirting / dado etc ,set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles, over & including 10 mm thick backing coat in cement mortar (1:4) etc complete all as specified & directed.

S&F WC squatting pan " Orissa Pattern" of size 580 mm X 440 mm white with integral foot rest including cast iron "P" or "S" trap, front or back inlet and making connection to trap & to flushing cistern complete including taking down existing pan & making good disturbed surface complete all as specified & directed.

S&F vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), fixing seat cover including connection to drain (or outgoing pipe, and to flushing pipe & antisyphonage pipe etc with aluminium hinging device complete all as specified and directed. Note : Plastic seat cover shall be measured separately as Supply only as considered under respective items.

Supply only plastic water closet seat closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S & F in repair PVC flushing cistern 10 ltr capacity valve less syphonic action type low level with and including ball valve float and handle, PVC flush pipe 32 mm bore & PVC connection 15 mm bore 450 mm long with PTMT nuts and brackets complete set & making good disturbed surface with CM 1:3 complete all as specified and directed.

S & F vitreous China wash basin, any colour, flat back size 550 mm X 400mm including 32mm brass chromium plated waste coupling ,PVC 32 mm bore waste pipe, chromium plated Grating including bracket , fixing of pillar tap & PCC 1:2:4 ,type B-1 (using 20 mm graded crushed stone aggregate) for embedding brackets & making good disturbed surface with CM 1:3 complete all as specified and directed. Note : Pillar tap as supply only will be measured & paid seperately under respective item of BOQ.

Supply only pillar taps fancy type, cast copper alloy with capstan head, chromium plated, screwed down with or without lettered 'Hot' or 'Cold' with long screw shanks and fly nuts, screwed for iron pipe and fixed for 15 mm bore complete all as specified & directed.

S & F in repair Grating doom 100mm dia of PTMT (minimum weight 25gms) complete all as specified and directed.

S&F in repair angle/ stop cock chromium plated with long shank cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends of size 15 mm bore complete all as specified & directed.

S&F in repair bib taps , cast copper alloy with capstan head or butter fly handle,chromium plated screwed down with high pressure screwed for iron pipe and fixed 15 mm bore complete all as specified & directed.

Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.for capacity of tank exceeding 500 Litre but not exceeding 1000 litre complete all as specified & directed.

S&F in repair 20 mm bore ball brass valves,high pressure,with polythene float and flynut ,screwed for iron pipe or brass ferrule and fixed complete all as specified & directed.

S&F in repair PVC connection 15 mm dia size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair brass chromium plated shower rose 125mm size fancy type with or without siwelves joint fixed to iron pipe etc complete all as specified and directed

S&F in repairs flush pipe of polyethylene of low or high density or PVC of 32 mm dia, for low level flushing cistern complete all as specified and directed.

S & F in repair 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Taking up or down steel tubing and connections of 15 mm bore or removal to store complete etc and making good the surface in cement mortar 1:3 complete all as specified & directed.all as specified & directed.

S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) fixed to walls and ceiling or laid in floors including cutting chasees for brick walls and making good the surfacein cement mortar 1:3 complete all as specified & directed.

M&L for cutting chases in Brick wall, pinning in making good to facing where required and pointing in cement mortar (1:3) to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chasses for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exceeding 10 cm girth, complete all as specified and directed ..

Demolition of cement concrete reinforced as in chullah hoods, shelves, cover slab and platform, etc,and removal of rubbish off from site complete all as directed by Engineer-in-Charge.

M&L for precast reinforced cement concrete 1:2:4 ,type B-1 (using 20 mm graded crushed stone aggregate) as in kitchen platform, shelves , cover slab, etc. including necessary formwork complete all as specified and directed. Note : Reinforcement will be measured & paid seperately under respective item of BOQ.

M&L for mild steel TMT bars 10 mm dia and over grade Fe -500 , as in reinforcement ,cut to length, bent to shape required, including cranking bending spirally for hooping for column,, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete etc all as specified and directed.

M & L for 18 to 20 mm thick granite (of any type) work (tabled rubbed and polished) of any shade in cooking platform, steps, window, cills etc., over and including 15mm thick screed base in CM (1:4) laid and jointed with white cement slurry mixed with admixture of pigment to match the shade of the slab including rounding of slab and demolition of old slab where directed, complete all as specified and as directed.

Taking down cement plaster of brick or stone masonry etc including raking out joints , hacking for key & scrubbing down with water etc & removal of rubbish out off MOD land etc complete all as specified and directed.

Demolition of brick work of any description and in any position built in cement or cement lime mortar including all quoins, arches, pillars including segregation of serviceable bricks for reuse & removal of rubbish out off MOD land etc complete all as specified and directed.

M&L for Brick work with using old size sub class "B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 etc complete all as specified & directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick masonry wall / concrete surface finished fair and even etc. complete all as specified and directed.

M & L for rendering 5 mm thick in CM 1:4 on concrete surfaces as in ceiling finished even and fair complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of oil emulsion distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newely plastered surfaces of ceiling and applying three coat of white wash on ceiling ,chajjas,facia etc. surface complete all as specified & directed.

M&L for preparation of newly plaster surface of wall and applying two coats of cement base paint over a coat of alkali primer including necessary scaffolding complete all as specified & as directed.

M&L for complete removal of existing treatment from walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces with preparation of plastered surfaces including preparation of surfaces of walls and apply two coats of distemper oil emulsion (OBD) over a coat of alkali resistant primer (from same manufacturer of OBD) complete all as specified and directed.

M & L for preparation of old decorated surfaces of ceiling including brooming down or steel wire brushing, scrapping down smokes soot moulds, moss and efflorescent salts and treating oil and greasy spot & applying one coat of oil bound distemper, complete all as specified and as directed.

M & L for preparation of old treated surfaces of wooden of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint on wooden surface complete all as specified and directed.

M & L for preparation of old treated surfaces of steel of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint on steel surface complete all as specified and directed.

S & F in repair 110 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed

S&F in repair 75 mm bore PVC(SWR) pipes single socketed, in any length with rubber ring joints, fixed on wall including PVC clamp properly with PCC 1:2:4 complete all as specified and directed

S&F in repair 110 mm PVC(SWR) bends any radius with rubber ring joints complete all as specified and directed.

S&F in repair 75 mm PVC(SWR) bends any radius with rubber ring joints complete all as specified and directed.

S&F in repair 110 mm PVC (SWR) vent cowl complete all as specified and directed.

S & F in repair for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement with chromium plated grating with or without hole complete all as specified and directed.

M&L for demolition of cement concrete (un reinforced)in ground floor & paving of any thickness (above o rbelow ground level )by mechanical tools and removing excavated material exceeding 1.50 km and not exceeding 5.0 km complete all as specified and directed

M & L for 75 mm thick plain cement concrete (1:3:6) mix, type C-1 (using 20mm graded crushed stone aggregate ) as in plinth protection, finishing the surfaces even and fair without using extra cement, including 10 mm wide, 75mm deep joints made at 3.00 m in length and filled with bitumen 85/25 grade and sand in the ratio 1:3 including necessary form work , complete all as specified and directed.

Forming jambs, etc., in CM 1:4 to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete

S &F Powder coated aluminium work for doors, windows, ventilators shutters(fixed/sliding track two or three track) and partitions frames with extruded built up standard sections of approved make fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions with sealent with wall, i.e. at top, bottom and sides including cleat angle, C.P. brass/ stainless steel screws, all complete all as specified and directed.

&F powder coated aluminium window and ventilator shutters (minimum thickness of powder coating 50 micron) ,fixed type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleats glazing clips rubber packing anodised aluminium, snap beading screws, powder coated aluminium fittings complete all as specified and directed.

S & F 4.0 mm thick sheet glass ordinary quality and glazing in squares/ rectangular exceeding 0.5 Sqm in each pane glazing with oil putty or aluminium frame/shutters with rubber neoprene beading complete etc all as specified & directed.

S & F for Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 19mm/20 mm dia mild steel tubing chromium plated curtain rod, 1.0 mm wall thickness with fixing brackets,stops, rollers etc.,complete all as specified and as directed by Engineer-in-Charge. Note: Running length of curtain rod shall be measured & paid only.

S&F Vertical blinds curtain consist of a series of vertical fabric louvres or slats, twisted to close and obscure the window or opened wide to let in lots of light. The louvres are linked together by a chain and are operated using a cord, positioned at the far right or left of the blind complete all as specified and as directed by Engineer-in-Charge.

Dismantling mild steel work (tee, angle, channel or flat sections) of any description not otherwise provided for as in post, rafter, purlins etc rails complete all as specified & directed.

Excavation in post holes (or similar holes) not exceeding 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm thick as in soft disintegrated rock including watering & removing surplus soil material to a distance not exceeding 50 mtr & making good surface complete all as specified & directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in sub base of flooring, foundations,filling & mass concrete for fencing posts, foundation of pole ,struts & stay assembly etc complete all as specified and directed.

S&F steel work in tubular trusses /tubular post (square/ rectangular /circular) steel tubular sections including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161 1979 Grade St-240 complete all as specified and directed. Note: Drawing & design shall be approved by GE before erection of truss..

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, of any pattern roof coverings complete all as specified and directed.

M&L for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified & directed.

S & F fo Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified & directed..

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/ loose soil complete all as specified and directed.

M&L for broken stone ror boulder Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface

M&L for 80 mm thick factory made machine pressed pre-cast concrete coloured interlocking paver block of approved shade laid in design & pattern as in footpath, light traffic parking etc., made by table vibratory method using PU mould of any shape and size conforming to IS-15658-2006 of M-40 grade laid over & including 25 mm thick over coarse sand/ stone dust, compacting and proper embedding/ laying by vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; over & including 100 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as sub-base, surface finished even and rough complete all as specified and directed.

M&L for Pre-cast cement concrete solid block masonry type B-1 ,1:2:4 (using 20mm graded crushed stone aggregate) with solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

Removal of surplus excavated soil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified.

M/S tiwari enterprises

M/S Kunwar Construction