Providing protection of agriculture land from flood wa-ter by providing pump house in village Shadipur in Dis-trict Yamuna Nagar

Amount

Earth work excavation in ordinary soil exclusive compression of earth, earth work undressed with all lead, lift and other allowances including breaking of clods

Earth work for digging well in dry excavation from ground level up to the level where kerb is placed including reposting spoil within 60 mtr. Radius and fitting space on side the well after completion exceeding 4.5 mtr.( but upto 7.5 mtr. Length

Cement Concrete 1:3:6 with stone aggregate 20mm nominal size in foundation and plinth

First class Brick work laid in Cement Mortar 1:4 in foundation and plinth.

First class brick work laid in cement sand mortar 1:4 in first storey upto 4 mtr. above plinth level.

Cement Concrete 1:1.5:3 with stone aggregate 20mm nominal size for reinforced concrete work for well kerbs excluding steel reinforcement but including centring and shuttering, laid in position complete in all respect.

Cement Concrete 1:1.5:3 with stone aggregate 20mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centring and shuttering, laid in position, complete in all respect.

Cold twisted deformed (ribbed/tor steel) bars for RCC works, where not included in the complete rate of RCC including bending, binding and placing in position complete.

Plaster on under side of ceiling 6mm thick in cement mortar

12mm thick Cement sand plaster CC1:4 on wall internal side

Cement pointing 1:3 flush on brick and tile wall

white washing two coat

Finishing wall with exterior decorative cement based paint such as snowcemctc. On old work one work coat to give an even shade

Painting two coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on new steel or iron work

Lowering steel well kerb in the pit and assembling in position when depth is more than 4.5 mtr. From ground level

Providing and fixing M.S. angle and T- iron frames Pressed steel sheet frame door and window and ventilator including hold fast, butt hinge of ISI mark fixed position with machine screws and dully welded including all other suitable locking arrangement provided and welded with the frames and making holes and fixing glazing clips in the frames filling the welds and finished with a coat of red lead non setting primer complete in all respect

Refilling earth around the well lead 35 mtr

VT Pump of 10 cus

50 HP TEFC , 1500 rpm , vertical hollow shaft SPDP motor

panel suitable for 50 hp motor

ISMB 300 (girder for chain pully )

M.S Delivery pipe (i.e) 8mm thickness

The Mandeywala co-op L and C society ltd.