Loading…
Loading…
Tender Value
₹1.7 L
EMD Value
₹3,378
Closing Date
25 Jun 2026, 11:00 am2d left
Similar tender results from the same govt authority in the past 3 years.
Executive Engineer
Jal Shakti Division Shahpur
Restoration of rain damages of LWSS Manai Pargod under Section Manai Sub Division Manai in Tehsil Harchakian Distt, Kangra, (HP)
2026_HPIPH_136793_1
EE/JSDS/NIT/2026-2352-2401 dated- 16/06/2026
Open Tender
Civil Works
90 days
Shahpur
Please refer Tender documents.
6 documents required · 6 mandatory
₹350
Executive Engineer
₹3,378
16 Jun 2026
16 Jun 2026
25 Jun 2026
16 Jun 2026
25 Jun 2026
16 Jun 2026
16 Jun 2026 - 25 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundations,trenches etc., in earth work, lift upto 1.50 mts. Stacking the excavated soil not more than 3 mts. Clear from the edge of the excavation & then returning the stacked soil in 15 cms. Layers,when required into plinths sides of foundation etc.,consolidating each deposited layers by ramming & watering & then disposing of all surplus excavated earth as dierected within all leads & lifts as per entire satisfaction of Engineer in charge | 75.6 | Cum | - | - |
| 2Laying ,jointing, with circumferential butt joints by electrical arc welding & flanged pipes with 5% flanged joints and remaining 95% with butt welding(Welding thickness shall be equal to pipe wall thickness) and testing of G.I Pipe of approved store issued rate make of following diameter confirming to IS:1239:1990 (Part-II) (latest with up to date amendments having wall thickness as specified below capable of withstanding required test pressure , including manufacturing and fabrication of reducers taper all shorts pieces, bends etc as per site requirement made from parent tubes. The laying of pipe shall also include flanged joints duly welded in three layer (one inner and two outer) Where ever required as per direction of Engineer in charge (Earth work in trenches and the cost of flanges i/c nut and bolts gasket will be measured and paid for separately) and all operation such as cutting welding and jointing fabrication of bends tees i.e lowering and laying in excavated trench to ensure required level including flushing cleaning and hydraulic testing complete in all respect to the entire satisfaction of the Engineer in charge. The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The welding electrodes shall be as per IS 814 of Advani Overlikon/Over cord s/s make. The rates also includes entire carriage of material ,flushing, Cleaning and Hydraulic testing,DP test of butt welded joints complete in all respect and to the entire satisfaction of Engineer in charge with in all leads and lifts | |||||
| 2.01 | 100 mm dia | 50 | Rmt | - | - |
| 2.02 | 65 mm dia | 150 | Rmt | - | - |
| 3Dismantalling of existing GI Flanged pipe in trenches and stacking properly of dismnatled pi[e at the suitable place as directed by the Engineer in charge ( Earth work to be measured and paid for separately) within all leads and lifts. | |||||
| 3.01 | 65 mm dia | 250 | Rmt | - | - |
| 4Relaying/Rerouting of existing GI Flanged pipe in trenches of 150 mm dia and stacking properly of dismnatled pi[e at the suitable place as directed by the Engineer in charge ( Earth work to be measured and paid for separately) within all leads and lifts. | |||||
| 4.01 | 65 mm dia | 250 | Rmt | - | - |
| 5 | Providing and fixing water proof submersible cable 3 core 6.00 mmSqm as per IS- 674-1964 (part - II) suitable for pump set from starter to P/well subject to the approval of HPSEBL authority as per the satisfaction of Engineer-in-charge. | 175 | Rmt | - | - |
| 6Providing and Fixing Cast iron Sluice Valve of kirloskar,Kartar, Bir & Leader PN=1.6 Kg/cm square or any other ISI make including rubber gasket, nuts & bolts etc. complete in all respect with in all leads and lifts and as per entire satisfaction of the engineer in charge. | |||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.38 MB
6and8form.pdf
Tender Documents • 0.80 MB
Termsandconditions.pdf
Tender Documents • 0.16 MB
BOQ_202463.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid