Rate Contract

Bidder's Firm Name :

Sr. Particular No. Details of the documents to be submitted Page Remarks of the bidder

5 Copy of Bid Security (Demand Draft)

10 Form-I : No Deviation Certificate [on ₹ 500/- Non-Judicial Stamp Paper]

16 Valid Registration Certificate / Certificate of Incorporation of the bidder’s firm

17 GST Registration Certificate of the bidder’s firm

18 PAN Card of the bidder’s firm

19 Bidder’s Average Annual Turnover Certificate / Statement duly verified and audited by Charted Accountant for the F.Y. 2022-23, 2023-24 & 2024-25. Bidder’s GST and/or PAN Number must be mentioned on this document.

20 Bidder/Original Manufacturer’s -An average annual turnover of at least ₹ 60 Crores from similar work, derived from Indian business operations during the Last 03 Financial Years : 2022-23, 2023-24 & 2024-25.

21 Bidder’s Income Tax Return Acknowledgement for Last Three Assessment Years: 2022-23, 2023-24 & 2024-25

22 Bidder’s Profit & Loss A/c and Balance Sheet (F.Y. 2022-23)

23 Bidder’s Profit & Loss A/c and Balance Sheet (F.Y. 2023-24)

24 Bidder’s Profit & Loss A/c and Balance Sheet (F.Y. 2024-25)

25 19 Bidder’s Profit & Loss A/c and Balance Sheet (F.Y. 2024-25)

26 Bidder’s valid Drug Licenses issued by the Central / State Drug Controller.

27 Valid Licenses / Certificates as per US-FDA / European CE / Equivalent Indian Standards (wherever applicable).

28 Import Licenses issued to the Authorized Agent / Importer by the Government of India or Manufacturing License issued by CDSCO as the case may be.

29 This NIT Document and its Corrigendum (issued by the institute), all pages duly signed and stamped.

30 Any other relevant document (left to be included in this list).

51 TOTAL NUMBER OF PAGES IN TECHNICAL BID DOCUMENT

Annexure-1 ‘List of Quoted Items’ Rate Contact for Procurement of Orthopedics Implants on Consignment Basis-Part-II

Sr. Item Code Item Name specification Original Manufacture’s name Name of the Authorization Certificate issuer (this column is to be filled, if the Authorization Certificate has been issued by other than the Original Manufacturer) Brand Name (Make/Model No.) of the Item Page No. manufacturer/ import licences attached Technical Bid Document Page No. USFDA/CE/DCGI certificate attached in Technical Bid Document Whether complying with NIT’s Specs( Yes/No) Mention here - if bidder is quoting their item with any different specification or size

a b c d e f g h i j

TOTAL NUMBER OF QUOTED ITEMS

Admin/RC/ 03/2026-AIIMS.JDH

RATE CONTRACT FOR SUPPLY OF ORTHOPEDICS IMPLANTS ON CONSIGNMENT BASIS : Part-II AT AIIMS JODHPUR

Tender Inviting Authority All India Institute of Medical Sciences, Jodhpur

Name of the Firm:

E-Mail of Firms:

Item Code Item Name Specification / Make/ Model /Size / Length / Holes/ Diameter Name of Quoted Company/Brand Make/ Model Price / Unit (Excl. GST) MRP

1.01 Latarjet procedure Hole Length

Preferably USFDA / European CE for all implants

Wedged profile plate for latarjet procedure

Screw, cannulated, fully threaded, titanium, 4mm diameter, length 30- 40 mm

Guide wire, for 4 mm screws, 1.35 mm Å~ 150 mm, with trocar tip

K-wire, for 4 mm screws, 1.4 mm Å~ 300 mm

Screwdriver, T15 hexalobe, cannulated, for 4 mm screws

Screw, cannulated, partially threaded, titanium, 4.5 mm Å~ 30 - 40 mm

Guide wire, for 4.5 mm screws, 1.57 mm Å~ 17.78 cm, with trocar tip

Guide wire, for 4.5 mm screws, 1.57 mm Å~ 304.8 mm, with trocar tip

Handle, for 4.5 mm screws, 3.5 mm hex, 178 mm

Screw, cannulated, partially threaded, titanium, 3.75 mm Å~ 30- 40 mm

High-Strength Suture With UHMWPE Core and UHMWPE and Polyester Sleeve

# 0 suture., 95-100 cm, with tapered needle, 22.2 mm . Circle

# 0 suture., 95-100 cm, with diamond point needle, 22.2 mm . Circle

# 0 suture., 95-100 cm,

# 1 suture., 95-100 cm,

# 1 suture., 95-100 cm,, white / black,

# 2 suture., 95-100 cm, with tapered needle, 26.5 mm . Circle

# 2 suture., 95-100 cm, blue, white / black,

# 2 suture., 95-100 cm, , with reverse cutting needle, 36.6 mm . Circle

# 2 suture., 95-100 cm, with 2 tapered needles, 26.5 mm . Circle

# 2 suture., 95-100 cm, with tapered needle, 36.6 mm . Circle

# 2 Suture With Loop and Single Suture Tail for Cinch Stitches

suture Loop With Free Sliding Needle no. 0,2.

Polyester Sleeve With Radiopaque Blue Marker to Protect Fingers During Knot-Tying

Arthroscopic Latarjet Screws system:

Preferably USFDA / European CE for all implants

1. The system should allow to work arthroscopically or mini-open and is designed to provide reliability, consistency, and ease of use. 2. Should be made up of titanium of 4.5mm (Dia) lag with top hat & flat screw head. 3. Should have 1.7mm cannulation. 4. Distal tip of screw should have cutting flutes with non-threaded proximal body to sit within coracoid for bone compression. 5. The size should range from 30 to 38mm in increment of 2mm. 6. The system should have complete instrumentation provided along with the implants

3.01 Arthroscopic bone block fixation with button system:

Preferably USFDA / European CE for all implants

1. The system should allow to work arthroscopically or mini-open and is designed to provide reliability, consistency, and ease of use. 2. The system should have complete instrumentation provided along with the implants

4.01 Pediatric DHS/DCS System

4.01 DHS Plates, standard barrel (38 mm barrel)

Shaft Length(mm) 46-333.

Barrel Angles 1300 – 1500 (with 50 gradual increment)

DHS Plates, short barrel (25 mm barrel

Shaft Length(mm) 46-110

Barrel Angle. 1300 – 1500 (with 50 gradual increment)

4.03 DCS Plates

Shaft Length(mm) 114-370

Barrel Angle. 95

4.04 Lag Screws

Shaft diameter 8 mm

Thread length 22 mm

Diameter of cannulation 2.7 mm

Length (mm) 50-145

Thread diameter 12.7mm; 14 mm

4.05 E. Compression Screw 36 mm

F. Universal Locking Trochanter Stabilization Plate 131 mm

4.07 G. Trochanter Stabilization Plate 138 mm; 148 mm

5.01 LCP Paediatric Hip Plate System

(2.7; 3.5 mm & 5.0 mm) – for Proximal Femoral Osteotomies

A. Profiles (mm) B. Angles (degree)

Note: Paediatric Condylar Plate (900, 3.5/5.0 mm, 3/5/7 Holes)

6.01 Adolescent Femoral IM Nail

• Cannulated • Diameter (mm) – 8.2/9.0/10.0 • Lengths (mm) - 240 through 400 in 20 mm increments • Proximal Locking – 1200 antegrade locking; Two recon locking holes; one static and one dynamic transverse locking holes. • Distal Locking – Two transverse locking holes • Cross section – Helical Fluted • Recon Screws – 5.0 mm (50 -125 mm with 5 mm increments); partially threaded; 3.2 core diameter. • Locking Screws – 4.0 mm (18 -80 mm with 2 mm increments); 3.3 core diameter • End Caps – cannulated; 0/5/10/15 mm extension.

• K – wires – 0.8 – 2.5 mm • Knurled Rods – Straight (2/2.5 mm; 75/100/150/200 mm)/ Bent (L/Z shaped; 2.5/3.0/4.0 mm) • JESS Distractors: Single Hole (50/75 mm); Double Hole (75/100/150/200/250/300 mm); Fish mouth (150/200/250/300 mm); Swivel (100/150/200/250/300 mm) • Hinges/ LInk Joints - Small, Medium, Large • Clamps – Alpha (2/3 mm)/ Beta (3/4 mm) • Traction Stirrups • C-D Units – (25/36/50 mm) • Central Sleeve - (25/36/50 mm)

8.01 JESS Fixator

9.01 Paediatric Ilizarov

• Composite Half Ring (80/90/100/110/120 mm Int. Dia.) • Composite Foot Ring (80/100 mm Int. Dia.) • Composite ¾ Ring (90/100/110/120 mm Int. Dia.) • Threaded Rod (40/60/80/100/120/150/200 mm Length) • Threaded Rod – Slotted (40/60 mm Length) • Ilizarov Wires (1.0/1.2/1.5 mm Dia.) (250/300 mm Length) • Olive Wires (1.0/1.2/1.5 mm Dia.) (250/300 mm Length) • Wire Fixation Bolt (Cannulated/ Slotted) • Wire Fixation Buckle • Post – Male (2/3/4 Holes) • Post – Female (2/3/4 Holes) • Hinges – Male • Hinges – Female • Universal Joint • Connection Bolts (10/16 mm Length) • Connection Nuts (M5 – Standard/ Nylon Nut/ Triangular Nut) • Bushings • Plates – Standard/ Twisted 900 • Plate Adaptor (20/30 mm Length) • Washers - Standard (1.0 mm/1.5 mm/ Slotted)/ Conical Coupler • Blocks for Half Pins – (1/2 Hole) • Telescopic Rod (40/60/80 mm Length) • Oblique Support • Wrench – Box/ Combination (8 mm) • Wire Tensioner

10.01 Pediatric Rail System (Pitkar)

• Rail (150/200/250 mm Length) • Clamps – Central/ End/ Swivel • CD Unit • Half Pins

11.01 Bone Staples (Smith & Nephew) • Table Fixation Staples • Osteotomy Fixation Staples • Regular Fixation Staples • Krakow HTO Staples

12.01 Epiphysiodesis Eight Plate

13.01 PRECISE Nail System

14 Tomofix Osteotomy System

14.01 A. MHTP (Medial High Tibial Plate)

Dimensions Standard(mm) Small(mm) Anatomical(mm)

Length 115 112 112 Width 16mm 14mm 14 mm Thickness 3 mm 3.2 mm 3.2 mm Gap (Prox. Holes) 11 mm 9 mm 9 mm Radius (Prox. Part) 38 mm 30 mm 30 mm Sagittal Angle (Prox. Screws) 100 caudally 110 caudally 100 caudally

14.02 B. LHTP (Lateral High Tibial Plate) 102 mm

14.03 C. LDFP (Lateral Distal FemurPlate) 141 mm

14.04 D. MDFP (Medial Distal Femur Plate) 121 mm

Note: Tomofix Osteotomy Chisels (10/15/20/25 mm); Titanium Spacer (5.0 X 2.0 mm); Bone Spreader; Osteotomy Gap Measuring Device.

15 Small Fragment LCP System

15.01 A. Cortex Screws 2.7 mm

15.02 B. Locking Screws 3.5 mm

15.03 C. Cancellous Bone Screws 4.0 mm; Solid; Fully Threaded

4.0 mm; Solid; Partially Threaded

4.0 mm; Cannulated; Short Threads

15.04 D. 3.5 mm LCP Plates

15.05 E. 3.5 mm LCP T- Plates 3 Hole Head; Oblique Right

15.06 F. 3.5 mm LCP T- Plates 3 Hole Head; Oblique Left

15.07 G. 3.5 mm LCP T- Plates 3 Hole Head; Right Angle

15.08 H. 3.5 mm LCP T- Plates 4 Hole Head; Right Angle

15.09 I. LCP 1/3rd Tubular Plates with Collar 33, 45, 105 mm

15.1 J. 3.5 mm LCP Reconstruction Plates 70, 84, 98, 112, 140 & 168 mm

15.11 K. 3.5 mm LCP Proximal Humerus Plates 90, 114 mm

16 titanium Elastic Nailing System

A. Nails 1.5 (Purple)

16.02 B. End Camps 1.5, 2.0,2.5 (Pink)

Stainless Steel Elastic Nailing System is also available in same configuration without any colour coding.

Distal femur resection by MegaC system

Solid joint component for distal femur replacement small right 1

Solid joint component for distal femur replacement medium right 1

Solid joint component for distal femur replacement large right 1 3,5,7,9

Solid joint component for distal femur replacement small right 1

Solid joint component for distal femur replacement medium right 1

Solid joint component for distal femur replacement large right 1

Stem segments ( 20mm,30mm,40mm,60mm) 1 each

Cemented/uncemented megaC stem ( 100mm, 130mm, 160mm) 1 each

centraliser ( 12mm, 14mm,16mm) 2 each

Proximal Tibia resection

Proximal tibial replacement joint component small right 1

Proximal tibial replacement joint component medium right 1

Proximal tibial replacement joint component large right 1

Proximal tibial replacement joint component small left 1

Proximal tibial replacement joint component medium left 1

Proximal tibial replacement joint component large left 1

Cemented/uncemented megaC stem ( 100mm, 130mm, 160mm) 1 each

Stem segments ( 20mm,30mm,40mm,60mm) 1 each

centraliser ( 12mm, 14mm,16mm) 2 each

Proximal femur replacement

MegaC neck segment short/long 1 each

coupling short/long 1 each

proximal spacers 10mm & 20mm 1 each

Stem segments ( 20mm,30mm,40mm,60mm) 1 each

Cemented/uncemented megaC stem ( 100mm, 130mm, 160mm) 1 each

expanson bolt short/long 1 each

centraliser ( 12mm, 14mm,16mm) 1 each

Diaphysial spacer

Coupling for diaphysial spacer 1

Stem segments ( 20mm,30mm,40mm,60mm)

Cemented/uncemented megaC stem ( 100mm, 130mm, 160mm)

centraliser ( 12mm, 14mm,16mm)

Reverse Shoulder arthroplasty

Company quoting for any part should have complete system

The implant should have good 10 year survivoship data

All the implants Should have preferably ODEP(Orthopaedic Data Evaluation Panel) Rating minimum of 10A*

21.01 Humeral Stem- Inlay Design

Short Humeral Stems Should have Distal 5mm-12mm (Dia.)

Short Humeral Stems Should have 56mm -77mm (Length)

Long Humeral Stems Should have Distal 6mm,8mm,10mm,12mm (Dia.)

Long Humeral Stems Should have 89mm -116mm (Length)

Extra Long Humeral Stems Should have Distal 7mm,9mm (Dia.)

Extra Long Humeral Stems Should have 150mm (Length)

Humeral Stems should have Metaphysis 32mm,34mm,38mm,42mm (Dia.)

Humeral Stems should have Metaphysis coating of Ti Plasma Spray

Reverse Neck Shaft Angle should have options of 135 degree and 145 degree

Humeral Stem should have an option of +9mm spacers

22.01 Shoulder arthroplasty: Humeral Stem- Onlay Design

Short Humeral Stems Should have Distal 5mm-12mm (Dia.)

Short Humeral Stems Should have 56mm -77mm (Length)

Long Humeral Stems Should have Distal 6mm,8mm,10mm,12mm (Dia.)

Long Humeral Stems Should have 89mm -116mm (Length)

Extra Long Humeral Stems Should have Distal 7mm,9mm (Dia.)

Extra Long Humeral Stems Should have 150mm (Length)

Humeral Stems should have Metaphysis 32mm,34mm,38mm,42mm (Dia.)

Humeral Stems should have Metaphysis coating of Ti Plasma Spray

Reverse Neck Shaft Angle should have options of 135 degree and 145 degree

Humeral Stem should have an option of +9mm spacers

23.01 Shoulder arthroplasty: Humeral Stem- Midlay Design

Short Humeral Stems Should have Distal 5mm-12mm (Dia.)

Short Humeral Stems Should have 56mm -77mm (Length)

Long Humeral Stems Should have Distal 6mm,8mm,10mm,12mm (Dia.)

Long Humeral Stems Should have 89mm -116mm (Length)

Extra Long Humeral Stems Should have Distal 7mm,9mm (Dia.)

Extra Long Humeral Stems Should have 150mm (Length)

Humeral Stems should have Metaphysis 32mm,34mm,38mm,42mm (Dia.)

Humeral Stems should have Metaphysis coating of Ti Plasma Spray

Reverse Neck Shaft Angle should have options of 135 degree and 145 degree

Humeral Stem should have an option of +9mm spacers

24.01 Shoulder arthroplasty : Reverse Insert/Liner/Poly-

Reverse Inserts should have different sizes-Symmetric,Symmetric Retentive or Constraint Symmetric,

10 degree/Asymmetric and 10 degree Retentive/Asymmetric Retentive or Constraint Asymmetric.

Reverse Inserts should have 33mm,36mm,39mm,42mm (Dia.)

Reverse Inserts should have an offset option of +3mm,+6mm

25.01 Shoulder arthroplasty Glenoid:For RSA

Glenoid Baseplate should have 25mm,29mm (Dia.), Material -Ti, Fixation Technology - Adaptis Porous Ti

Glenoid Baseplate Backside Geometry should be Flat: Standard/Lateralized, Curved: Augment Wedge

Glenoid Baseplate should have Lateralization option of +3mm,+6mm

Glenoid Baseplate should have Augment option

Glenoid Augment Baseplate should be Half Wedge 35degree,Full Wedge 15degree

26.01 Shoulder arthroplasty : Press-Fit Post

Glenod Baseplate should have Central Fixation option with Press-Fit Post of Short Length 7mm,Long Length 15mm

27.01 Glenoid Baseplate Central Screw:

Glenoid Baseplate should have Central Fixation option with Screw: 25mm,30mm,35mm,40mm (Length) and 6.5mm,9.5mm (Dia.)

28.01 Glenoid Baseplate Peripheral Screw:

Glenoid Baseplate Peripheral Screw should have 5mm (Dia.), 14mm-54mm (Length)

Glenoid Baseplate should have Peripheral Screw Fixation option with 2 locking,2 compression or 3 locking,1 compression

29.01 Glenosphere- Material: CoCr

Glenosphere should have 33mm,36mm,39mm,42mm (Dia.)

Glenosphere should have eccentric offset option: +2mm,+3mm,+4mm (size independent)

Glensophere should have Lateralization of +3mm

Glenosphere should have Morse Taper + locking washer/screw attachment with Baseplate

30 Hemi Shoulder

30.01 Fracture Stem

Reverse Morse Taper provides the ability to move between a hemi, total, or reverse shoulder arthroplasty without removing a well-fixed Comprehensive Fracture Stem

Anatomic 45 degree neck angle provides ample room under the collar for tuberosity reconstruction

Contoured suture holes provide for significant reduction in suture wear.

Six diameters available: 4, 6, 8, 10, 12, and 14mm

Designed for cemented or uncemented applications

30.02 Humeral Head - Different variable sizes available in 38mm, 42mm, and 46mm

30.03 Taper Adaptor

31 Total Shoulder

31.01 Humeral Stems

45°/135° anatomic neck-shaft angle

PPS Porous Plasma Spray coating proximally to enhance biologic fixation

Reverse Morse taper allows for increased access to the glenoid and conversion to the Comprehensive Reverse Shoulder

Uncemented or cemented use

Available in Micro, Mini and Revision lengths

31.02 Hybrid Glenoid

Non-conforming diameter of curvature provides the ability to use any size head with any size glenoid

Three outer pegs for cemented fixation

Two central peg options 1. Regenerex® Porous Titanium Construct for biologic fixation 2. Polyethylene compression fit for cemented use

IV. Small, Medium and Large glenoid base sizes

31.03 Humeral Head

Infinite offset options between 0.5 and 4.5

Allows for accurate reproduction of natural anatomy

17 Head Sizes, ranging from 38 to 58 mm in diameter and 18 – 27 mm in height

32.01 Taper Adaptor

REGULAR 4" HUM C/M

6" XSMALL HUM C/M

REGULAR 6" HUM C/M

4" XSMALL HUM C/M

SMALL 6" HUM C/M

HUMERAL ASSY 6 IN SML

33 Elbow Replacement: All the implants Should have ODEP(Orthopaedic Data Evaluation Panel) Rating minimum of 10A* All implants Should be preferably USFDA Approved

33.01 Humeral Stems

I. Twelve Humeral Stems – 4”, 6”, and 8” lengths in extra-small, small, and regular sizes

II. Triangular to match canal landscape maximizing stability by minimizing rotation

III. Proximal humeral flange permits insertion of bone graft anteriorly to enhance thickening of bone stock where maximum stress occurs, reducing posterior displacement and torsional forces and helping protect bone/cement/implant interface

IV. Tivanium Ti-6Al-4V Alloy for durable, lightweight construction

I. Twelve Ulnar Stems – regular and long lengths in extra-small, small, and regular sizes

II. Plasma spray coating provides enhanced cement fixation; implant intended to be used with bone cement for both immediate and long-term fixation

III. Quadrangular to match canal landscape, to help minimize intramedullary rotation in the ulna

34.01 Absorbale calcium sulphate antibiotic beads 5cc

35.01 Absorbale calcium sulphate antibiotic beads 10cc

36.01 Knee moulds

37.01 Hip Moulds

38.01 Shoulder moulds

39.01 artificial bone graft

40.01 Cement Gun Disposable

41 BIPOLAR - MODULAR - CEMENTED AND UNCEMENTEDa

41.01 LINER ASSY 38MM OD X 22MM ID

41.02 LINER ASSY 39MM OD X 22MM ID

41.03 LINER ASSY 40/41OD X 22ID

41.04 LINER ASSY 42/43OD X 22ID

41.05 LINER ASSY 44/45/46OD X 28ID

41.06 LINER ASSY 47/48/49OD X 28ID

41.07 LINER ASSY 50/51/52OD X 28ID

41.08 LINER ASSY 53/54/55OD X 28ID

41.09 BIPOLAR METAL SHELL 38 MM OD

41.1 BIPOLAR METAL SHELL 39 MM OD

41.11 BIPOLAR METAL SHELL 40 MM OD

BIPOLAR METAL SHELL 41 MM OD

BIPOLAR METAL SHELL 42 MM OD

BIPOLAR METAL SHELL 43 MM OD

BIPOLAR METAL SHELL 44 MM OD

BIPOLAR METAL SHELL 45 MM OD

BIPOLAR METAL SHELL 46 MM OD

BIPOLAR METAL SHELL 47 MM OD

BIPOLAR METAL SHELL 48 MM OD

BIPOLAR METAL SHELL 49 MM OD

BIPOLAR METAL SHELL 50 MM OD

BIPOLAR METAL SHELL 51 MM OD

BIPOLAR METAL SHELL 52 MM OD

BIPOLAR METAL SHELL 53 MM OD

BIPOLAR METAL SHELL 54 MM OD

BIPOLAR METAL SHELL 55 MM OD

42 Cemented Total Hip System Product

42.01 Cemented Femoral Stem (titanium alloy, Double Tapered)- 12/14 Taper, Collarless, reduced lateral shoulder taper, wedge type with an option of having same instrument can be used for cemented and uncemented Stem with various sizes. No centralizer rquired in application, Good Survivour data over 15 years. cemented stem

42.02 Metal Modular Head 28mm (12/14 Taper) made up of COCR with at least 4 variable Neck Length Metal Head

42.03 Cemented Cup made up of highly crossed linked polyethylene various sizes , 28,32,36 mm head ( 32 mm head starts with sz 45 OD cup) cemented cup

42.04 Bone Cement - 2 packets - 40 Gm ( Need different packet For cup and stem fixation ) Bone Cement

42.05 Cement Restrictor Cement Restrictor

42.06 Cancellous Bone Screw 6.5 mm dia and various sizes 20-50 mm Cancellous Bone Screw

42.07 Uncemented hip stem : Good Survivor data over 15 years. Provided with complete instrumentation

42.08 Uncemented cup : Good Survivor data over 15 years. Provided with complete instrumentation

42.09 Revision hip stem including all long stem sizes, all modular stem sizes. Good Survivor data over 15 years. Provided with complete instrumentation

42.1 Revision acetabular cup : Including and not limited to, multihole cup, cages, revision cups. Good Survivor data over 15 years. Provided with complete instrumentation

42.11 Acetabular wire mesh for revision

43 Total Knee Replacement (All Poly Primary Knee )

43.01 Posterior stabilized HI-FLEX Femoral Component made up of highly polished CoCr alloy , size ranges from 2 to 8 with 1 mm increments, lugs for further add to stability. Good Survivour data over 10 years. Femur PS

43.02 APT Tibia Base and Tibial Insert containg an Antioxident material corvernox in making. good locking mechanism and verious size option , size ranges from 5 to 14 with 1 mm increments and congruent with femur design,with specifific centraly insert locking mechanism. APT tibiavarious sizes ranges from 2 to 8mm, 1 mm incements.Can accommodate +/- 1 size as per the size of the Femoral component. Poly tibia should have micro lock Chamfers for better cement fixation . All Poly Tibia Monoblock

43.03 Patellar Button with all sizes 29, 32, 35, 38 mm with different option like medialized dome or anatomic patella and should have an antioxidant covernox PATELLA

43.04 Total Knee Replacement metal backed (Primary Knee)

43.05 Revision total knee replacement system with all the options of constraint from partial to complete.

43.06 Unicondylar knee replacement: mobile bearing

43.07 Unicondylar knee replacement: Fixed bearing

Item Code Product Name Specification

44.01 Anterior cervical locking plate- It should be made commercial pure medical grade Titanium -Profile of the plate must 2.0 mm - 2.5mm -Width of the plate 16mm-17.5mm wide. -Screw must be available from 12mm to 18mm length, self tapping & self drilling & variable angel & fixed angel screw option -cranial screw angulation must be 6 degree.

45.01 Anterior Cervical interbody fusion device with screw- The implants should be made from radiolucent PEEK to enable to optimal visualisation of fusion. The implants should be stand-alone interbody fusion device for C-spine Spacer component must be made of PEEK/TITANIUM. The implants must vote in parallel lordotic & convex implants sets with hights varying from 5mm- 9 mm. Implant must have on one step locking screw & screw angulation must 40° & 8° degree increase & decrease. Screw should be dual threaded. Should have option for 2 screws. Screw must have cortical-cancellous thread design in 3.5 & 4mm diameter.

46.01 Anterior Cervical interbody fusion cage- Cage should be PEEK /TITANIUM material. Should have Radiopaque marker which add in proper positioning of implants hights 5mm - 10mm. Implants must have 6° lordotic curve. Cage must have Graft window for Bonegraft.

47.01 Odontoid screw - Screw should be made up of Titanium Alloy (TAN) Screw should be cannulated & self-drilling Screw should consist of 10- 12mm short thread Screw should be 4mm Diameter & length of 36mm-50mm The whole system should be compatible to screw insertion.

48.01 Cervical Round/Over mesh cage - Diameter- 10mm- 16mm Length- 10mm- 100mm

49.01 Thoracolumbar Vertebral body Replacement Mesh cage - Diameter- 13mm- 22mm Length- 10mm- 100mm

50.01 Sublaminar Titanium cable system- The cable should be made of multiple strand of Titanium to enable better grip over tissues. The individual packaging should be available double cable & single cable individual sterilized packing. It should be malleable with Crimp. It should be of medical grade Titanium and should be artefact free on MRI & CT Scan.

51.01 DISC PROSTHESIS FOR CERVICAL SPINE- Anatomical footprint design for maximum endplate coverage . -Three different heights (5, 6, & 7mm) allowing adjustment to the individual dimensions of the disc, & depth available in 12,14,16 & 18mm -Superior & inferior implant plate made of Titanium alloy ceramic composite in two pieces implant. - Ball & trough based, Plasma- sprayed Titanium coating.

52.01 PLIF/ TLIF Cage- PLIF/ TLIF Cage -The implant must be radiolucent made up of PEEK- material with sharp serrated edge. -The implants should have range of Hight 8mm- 15mmin 1mm or 2mm incremental to according patient anatomy. -The implants have marker to indicate cage position on x-ray. - The Implants must have a bone graft window. - The implants available in 22mm, 26mm & 32mm length.

53.01 Olif Cage- -The implant must be radiolucent Poly ether ether ketone. Should have Space for filling the bone graft. Should be self distracting bullet shaped with Convex Shap designed to fit patient anatomy. Should be available in various lordotic options of 0 degree, 6 degree & 12 degree & Diameter start from 8mm to 16mm in increment of 2mm. Should have 5mm cage length in front of the cage markers which should be visible in AP x-ray view. Should be available in different lengths 40mm, 45mm, 50mm, 55mm & 60mm. Should have an anterior nose head of 5mm for easier insertion. Should be an impacted cage system compatible with minimally access technique. Should be able to undergo orthogonal maneuvers.

54.01 Polyaxial/Monoaxial pedicle screw system - The system must have in medical grade Titanium alloy. The system should be the pedicle screw system for posterior stabilization of the T/L spine. System should be low profile. System should be available in length of 25mm- 50mm & Diameter should 4.5mm-7.5mm with 25°-45°angulation. The system must have Polyaxial pedicle screw & reduction screw & transverse bars with various length. System must have the option of the rod 5.5/6mm

55.01 Pedicle screw system with cobalt chrome Multiaxial Head - System should have OSTEOGRIP dual lead thread pattern with a tapered tip for enhanced fixation at the bone implant interface, better closure mechanism. -System implant should be equipped with implant tracking system technology & provide device quality and utilization related data. -Factory calibrated navigated top loading screw with cobalt chrome tulip head for strong fixation & low profile to treat trauma, tumor & degenerative pathologies. -System should be able to accommodate multiple rod material option. - system should be compatible with enabling technology which is installed in organisation. - System should have be cannulated for MIS surgery & open surgery. - System should have Fenestred also for compatible with open & MIS surgery. -System should be compatible with 4.5mm to 5.5mm rod. - System should have rod option for pre-cut& pre-bend & straight of different sizes. -System should have option for Titanium monoaxial screw & hooks to be used 4.5mm & 5.5mm rod. -System should have colour coding for easy to use. -System should have ergonomically designed instruments.

56.01 Percutaneous pedicle screw fixation system- The system should single & multiple level capability. The system should have Polyaxial/ Monoaxial screw with top loading locking mechanism. Implants should be cannulated poly axial with 4.5, 5.5 & 6.5mm dia screw for percutaneous thoracolumbar fixation with break off set screw. System should have rod option for pre-cut& prebend & straight of different sizes. System should have free hand rod inserter instruments. System should have for measuring & rod confirmation tool which help to surgeon to check the insertion of the rod on to the screw percutaneously. System should provide unique method of compression & distraction. - system should be compatible with enabling technology which is installed in organisation. - System should have cannulated instruments for ease of working on guide wire. The system should have reverse threaded technology to reduce pull-out strength. Implants should be top loading, top tightening & most importantly reverse thread technology with break off plugs. System should compatible with 5.5mm Dia rod. System should be available for demonstration as per therequirement.

57.01 Demineralized bone Metrix Bone (DBM)- Should be having the capability for both osteoconduction and osteoindution. Should be available in putty form. Should be available in 3 sizes based on volume of graft- 1cc, 2.5cc & 5cc. Should be available in sterile packing.

58.01 BMP- GRAFT- Single protein- Bone morphogenic protein (rhBMP2) Size available in - X small (1.4cc), Small (2.8cc), Medium (5.6cc), Large (8cc).

59.01 Synthetic Granules Bone Graft- Synthetic bone Graft substitute with recordable ceramic granules. -Graft Should have hydroxyapatite (HA) 15%. -Graft available in sterile packaging. -Graft available in based on volume 5cc & 10cc.

60.01 Bone Cement- Synthetic PMMA & hydroxyapatite combine with osteoconductivity. -Should be 50% hydroxyapatite in the powder component. -Should be long working time & low exothermicity. -Should be use in Kyphoplasty & Vertebroplasty surgeries. -Should be in sterile packing.

61.01 Lateral mass & Occipitocervical Module- Three-in-one Set of options that provide adjustability, flexibility & adaptability to accommodate for anatomical challenge within occipitocervical spine. System implant should give surgeon choice of adjustable OC plate, midline plate, rod, screws & screw connector. System should have Polyaxial lateral mass screw in 3.5mm & 4.0mm Diameter & length should 10mm to 30mmm with 2mm increment. System should have reverse- angle design & 45 degree angulation with smooth tulip head. System must have 3.5mm Diameter Titanium Rod & Cobalt Cronium Rod. System should have adjustable 4mm Occipital plate between the two rods. System should have cortical bone screw in sizes- 4mm, 4.5mm & 5mm dia & length 6mm to 12mm with 2mm increment. System should have lateral offset connector accommodate medial- lateral flexibility in challenging rod/ screw alignment situation. System should have hooks in the set. System should have transverse connector. System should be available for demonstration as per the requirement.

62.01 Expandable Corpectomy cage- ● Expandable Vertebral Body Replacement for cervical & upper thoracic spine. ● System should offer a variety of centrepiece Diameter &System should be available for demonstration as per the requirement. End Cap that offer surgeons the flexibility need to treat patients through a lateral, anterior or posterio- lateral surgical approach. ● system should have kyphotic/ lordotic End Cap option of 4°, 8° and 15°. ● System should have a release mechanism that allows implants adjustment or removal from any surgical approach regardless of initial insertion approach. ● System should have cage diameter form 13mm, 16mm, 19mm, 22mm & 25mm with hight ranging 16mm to 124mm. ● System should also have 1.2mm incremental expansion with self locking feature. ● System should have a self-locking mechanism. ● System should have colour coding for ease of use. ● System should have ergonomically designed instruments.

63.01 Kyphoplasty & vertebroplasty kit- The Kit should be available in pre-sterile. Should have working cannula with inner diameter 3.2mm or less outer diameter 4.2mm or more with calibration along with cannulated obdurator. Should have calibrated drill with cm/mm marking on proximal end. Should have digital battery operated inflation syringe to inflate the balloon showing pressure in PSI & ATM. Inflation time & volume of cavity created in vertebral body. The inflatable balloon tamps sizes- 10/3, 15/3, 20/3. (Either size) should be capable to bear pressure of 400 PSI & 700 PSI. The bone filler device should be calibrated & should contain minimum 1.5cc of volume. Anterior Radiopaque marker on balloon tamp should be Mark the anterior edge of the balloon. System component should be available in individually as well as in kit from including the following instruments- 1. 2 unit of 11-gauge bone access needle. 2. 1 introducer kit including introducer with extra cannula. 3.Drill with drill tip. 4. At least 4 guide pins. 5. Two balloon tamp+C20 6. 2 digital balloon inflator. 7. Six bone filler device.

Compact Hand System

2.7 MM LCP WITH RIGHT 2 HOLE HEAD

2.7 MM LCP WITH LEFT 2 HOLE HEAD

2.7 MM LCP, OBLIQUE WITH RIGHT 2 HOLE HEAD

2.7 MM LCP, OBLIQUE WITH LEFT 2 HOLE HEAD

2.7 MM LCP CONDYLER PLATE

2.7 MM LCP ADAPTION PLATE

2.7 MM LCP T PLATE 2 HOLE HEAD

2.4 MM LCP CONDYLER PLATE

2.4 MM LCP ADAPTION PLATE

2.4 MM LCP T PLATE 2 HOLE HEAD

2.4 MM LCP T PLATE 3 HOLE HEAD

2.4 MM LCP Y PLATE 3 HOLE HEAD

2 MM LCP CONDYLER PLATE

2 MM LCP ADAPTION PLATE

2 MM LCP T PLATE 2 HOLE HEAD

2 MM LCP T PLATE 3 HOLE HEAD

2 MM LCP Y PLATE 3 HOLE HEAD

2 MM CORTEX SCREWS

2.4 MM CORTEX SCREWS

2.7 MM CORTEX SCREWS

2 MM LOCKING SCREWS

2.4 MM LOCKING SCREWS

2.7 MM LOCKING SCREWS

LCP Plate 1.5, straight

LOCKING Plate 1.5, straight

LOCKING T Plate 1.5, 3 HOLE HEAD

LOCKING Tn Plate 1.5, 4 HOLE HEAD

Locking Y-Plate 1.5, 3 HOLE HEAD

Locking Condylar Plate 1.5, 2 HOLE HEAD

Locking Strut Plate 1.5

Plates, with Preassembled Short Drill Sleeves

LCP Plate 1.5, straight

LOCKING Plate 1.5, straight

LOCKING T Plate 1.5, 3 HOLE HEAD

LOCKING Tn Plate 1.5, 4 HOLE HEAD

Locking Y-Plate 1.5, 3 HOLE HEAD

Locking Condylar Plate 1.5, 2 HOLE HEAD

Locking Strut Plate 1.5

Adaption Plate 1.3, straight

T-Adaption Plate 1.3, 3 HOLE HEAD

T-Adaption Plate 1.3, 4 HOLE HEAD

V-Adaption Plate 1.3, 3 HOLE HEAD

Strut Plate 1.3

A.Distal femur LCP 4.5mm

5.0mm Locking Screws, self drilling/self tapping(mm) 18,26,40,55,65,75,85

5.0mm Periprosthetic Locking Screws,self tapping(mm) 8,10,12,14,18

4.5mm cortical screws (self tapping/non self tapping) 14 to 72(2mm increase), 76,80 to 100(5mm increase)

65.02 B.Proximal lateral tibia LCP 4.5mm (hockey)

5.0mm Locking Screws, self drilling/self tapping(mm) 18,26,40,55,65,75,85

5.0mm Periprosthetic Locking Screws,self tapping(mm) 8,10,12,14,18

4.5mm cortical screws (self tapping/non self tapping) 14 to 72(2mm increase), 76,80 to 100(5mm increase)

65.03 C.Proximal lateral tibia LCP 4.5mm (L shape)

5.0mm Locking Screws, self drilling/self tapping(mm) 14 to 48(2mm increase), 50 to 90(5mm increase)

5.0mm Cannulated Locking Screws (mm) 25 to 145 (5mm increase)

4.5mm cortical screws (self tapping/non self tapping) 14 to 70(2mm increase)

D. Proximal lateral tibia LCP 3.5mm (raft)

65.05 E. Proximal medial tibia LCP 3.5mm

65.06 F. Proximal tibia postero-medial /posterior LCP 3.5mm

G. Distal tibia medial LCP 3.5mm(low profile)

H. Diatal tibia antero-lateral LCP 3.5mm

65.08 I. Diatal fibula lateral LCP 2.7mm / 3.5mm

65.09 J. Diatal fibula postero-lateral LCP 2.7mm / 3.5mm

K. Small LCP screw box 3.5mm

3.5mm Locking Screws, self tapping(mm) 10 to 60 mm(2mm increase);65 to95m(5mm increase)

3.5mm cortical screws (self tapping/non self tapping) 10 to 50mm(2mm increase);55 to 110mm(5mm increase)

2.7mm cortical screw 10 to 38mm(2mm increase);40to 55mm(5mm increase)

4mm cancellous screw fully thtreaded 10 to 28mm(2mm(increase); 30 to 100mm(5mm increase)

4mm cancellous screw partially thtreaded 10 to 28mm(2mm(increase); 30 to 100mm(5mm increase)

4mm cannulated cancellous screws 10 to 72(2mm increase)

65.11 L. Variable angle locking anterior patella plates 2.7mm

Small Core, 3-hole, 6-hole

Standard Core, 3-hole, 6-hole

65.12 L. Variable angle locking calcaneal plates 2.7mm

66 Periprosthetic femur

A. Periprosthetic proximal fermur plate

66.02 B. Periprosthetic distal femur plate

66.03 C. Periprosthetic distal femur plate

D. Periprosthetic fermur shaft plate

Holes 10,12,,14

Length(mm) 210,249,,289

66.05 E. Periprosthetic trochanter plate Narrow and wide

Peri prosthetic fracture plate for humerus all sizes

66.06 F. Screws

5 mm unicorical 10 to 20 mm(2mm increase)

5mm 22 to 48 mm(2mm increase) 50 to 100(5mm increase)

5mm cancellous 50 to 100mm(5mm increase)

4mm 20 to 48 mm(2mm increase) 50 to 65(5mm increase)

4mm deep thread 20 to 48 mm(2mm increase) 50 to 65(5mm increase)

3.5mm locking 12 to 60(2mm increase )

3.5mm cortical 12 to 38(2mm increase ); 40 to 60mm (5mm increase)

5 mm cortical 30 to 60 mm( 2mm increase)

A. Proximal humerus LCP 3.5mm(PHILOS)

67.02 B. Distal humerus posterolateral LCP with lateral support 3.5mm

Holes 3,5,7,9,14

67.03 C. Distal humerus posterolateral LCP 3.5mm

D. Distal humerus medial LCP 3.5mm

Holes 3,5,7,9,14

67.05 E. Distal humerus extra articular LCP 3.5mm

Length(mm) 158194230

* Humerus nailing system with multiple (> 4) locking and screw options all sizes

67.06 E. Olecranon plate 3.5mm

F. Anatomical clavicle plate 3.5mm

Holes Length(mm) 6,7,8 94,110,,120

67.08 G. Lateral end clavicle plate 3.5mm

67.09 H. Hook clavicle plate 3.5mm

Length(mm) 70,85,99,112

Hook depth (mm) 12,15,18

J. Radiak head plate 2.4mm (rim plate)

Length(mm) 34,46,56

67.11 K. Radial head plate 2.4mm (neck plate)

Length(mm) 28,40,50

67.12 M. Variable angle Volar distal radius plate 2.4mm

Length(mm) 42,51,63,72

Length(mm) 45,54,66,75

Width 25.5mm Holes 2,3,4,5

Length(mm) 47,55,68,77

67.13 N. Distal radius plate 2.4mm

L plate (left and right angled)

T plate(3 hole head)

Juxta articular(5hole head) Holes 3,5

Extra-articular(4,5 hole head) Holes 3,5

Extra-long plate (4 hole head) Holes 8,10,12

2.4mm locking screws 6 to 30mm(2mm increase)

2.4mm cortical screws 6 to 30mm(2mm increase)

2.7mm cortical screws 10 to 30mm(2mm increase)

67.14 K. Small LCP screw box 3.5mm

3.5mm Locking Screws, self tapping(mm) 10 to 60 mm(2mm increase);65 to95m(5mm increase)

3.5mm cortical screws (self tapping/non self tapping) 10 to 50mm(2mm increase);55 to 110mm(5mm increase)

2.7mm cortical screw 10 to 38mm(2mm increase);40to 55mm(5mm increase)

4mm cancellous screw fully thtreaded 10 to 28mm(2mm(increase); 30 to 100mm(5mm increase)

4mm cancellous screw partially thtreaded 10 to 28mm(2mm(increase); 30 to 100mm(5mm increase)

4mm cannulated cancellous screws 10 to 72(2mm increase)

Diameter (mm)- 9 to 14 mm with 1 mm increments

Length(mm)-280 through 460 in 20 mm increments

Proximal Locking-Standard locking120 degree antegrade locking; one static and one dynamic transverse locking holes ; Two recon locking holes;

Distal Locking- Three locking holes; two static and one dynamic

Recon screw-6.5 mm ( Corec diameter- 4.5 mm, Length- 60 -130 mm with 5 mm increments

Locking screw-5 mm ( Core diameter- 4.3 mm, Length- 26 -80 mm with 2 mm incements and 85- 100 mm with 5 mm increments

End Caps-cannulated; 0/5/10/15/20 mm extension.

PFNA( Proximal Femoral nail antirotation ) -II

Diameter (mm) Short: 9 - 12 with 1 mm increments; Long- 9 and 10 mm

Length (mm): Short :170/200/240 : Long 260 - 340 with 20 mm increments and 340-420 with 40 mm increments

CCD angle-125 - 130 degree

Blade- 75 - 120 mm with 5 mm inrements

Locking Bolt (mm)- 4.9 mm; 16- 60 mm with 2mm increments; 60 - 80 mm with 4 mm increremts; 80 - 100 mm with 5 mm incremets

Locking screw (mm): 5mm ; 26- 80 mm with 2 mm incremenmts ; 85 - 100 mm with 5 mm increments

End Cap:0/5/10/15 mm extension

Diameter(mm) : Proximal- 15.66 , distal-9/10/11/12 / 14 (long)

Length (mm): Short : 170/200/235 ; Long- 300- 480 with 20 mm increments

Angles: 125/ 130/135 degree

TFNA Head screw (mm):- diameter 10.35 , Length: 70- 130 with 5 mm increments

TFNA helical blade (mm):- diameter 10.35 , Length: 70- 130 with 5 mm increments

Locking Screw: 4.2 mm , Lenght : 26- 80 mm with 2 mm incrementrs and 80 -100 mm with 5 mm increments

End Cap:0/5/10/15 mm extension

Expert Tibia Nail

Diameter(mm):8-13 with 1 mm increments; Proximal: 8 to 10 mm=11mm and 11to 13 mm=equal to shaft diameter

Length (mm): 255 - 465 with 15 mm increments

Proximal locking: 4 static and 1 dynamic

Distal locking: 1 oblique, 1AP and 2 medio lateral

Cross section: 8-10 = round and 11-13 =flute

Cancellous locking screw: 5 mm , lenght:30 - 90 mm with 5 mm increments

Standard Locking screw:4 mm with 3.3 mm core diameter, length: 18 - 80 mm with 2 mm increments for 8- 9 mm nail

Standatrd Locking screw:5 mm with 4.3 mm core diameter, length: 26 - 100 mm with 2 mm increments, 85 to 100 mm with 5 mm increments for 10-13 mm nail

End Cap:0/5/10/15 mm extension

Expert Hindfoot Arthrodesis nail

Diameter(mm):10/12/13

Length (mm): 150/180/240

Cross section: 10 mm-round;12 -13 mm:fluted

Proximal locking: 5mm , one static and one dynamic locking hole

Distal locking: 5mm static oblique locking, 6mm static transverse and 6mm spiral blade slot

Locking screw:5 mm and 6 mm, length: 26 mm to 80 mm with 2 mm incremnets; 80 to 100 mm with 5 mm increments

Spiral blades:12.5 mm, length: 45 to 100 mm with 5 mm increments

73 EXTERNAL FIXATOR SET

Tubular rods - diameter 10-11mm, 4 inches – 16 inches (increments of 2)

73.02 Universal clamp

73.03 Tube to tube clamp

73.05 Cancellous pin 6.5 mm

73.06 Cortical pin 4.5 mm

Spanners NO. 10,11

FOREARM FIXATOR SET

Solid rods diameter 4 mm, length 4 inches – 14 inches ( increments of 2)

Forearm pins 3.5mm

Metacarpal pins 2.5 mm

Small universal Clamp

Small tube to tube clamp

HYBRID FIXATOR SET

Half rings 120, 140, 160, 180

Long K wire – 1.8mm, 1.5mm

long K wire with olive – 1.8mm, 1.5 mm

— stainless steel/ titanium

— option for wires which are sharp single end/ both ends

— sizes diameter mm 1,1.5,2,2.5,3

74 Arthroscopic Implants

SL NO GENERAL SPECIFICATIONS

Retro Cutter Drill : A Sterile, disposable retro construction guide pin and reamer that allows minimally invasive socket creation from the inside out. The diameter of the instrument should be 3.5mm and it changes from a drill pin to a retrograde reamer by simply pushing a button and sliding the blue housing forward. A Retrograde reaming is done for creating sockets in femur and Tibia in ACL, PCL reconstruction & meniscal root repair. The disposable instrument should be available in sizes 6 mm - 13 mm, in half millimetre increments as a single sterile pack of every different size.

74.02 Retro Cutter Drill : A Sterile, disposable retro construction all-in-one guide pin and reamer that allows minimally invasive socket creation from the inside out. The diameter of the instrument should be 3.5mm and it changes from a drill pin to a retrograde reamer by simply rotating the wheel of desired diameter. The implant should have all in one reamer sizes ranging from 6-12mm with 0.5mm increments used in Ligament reconstruction and meniscal root repair for socket creation.

74.03 Interference Screw : A sterile, titanium interference screws for arthroscopic or open ligament reconstruction. The screw should have smooth and blunt threads with round head for ease of insertion and prevention of graft laceration. The screw should be available from 7-10mm in diameter with 25,30,35 mm lengths.

Concave ABS button:- A titanium attachable button of 11,14,17,20mm diameter size with mid opening for adjustable loop incorporation and additional holes for facilitation of biologics or graft sutures for cortical suspensory fixation ligament reconstruction. Each button should have a collar in front in order to perfectly fit in tunnel size from 4mm-12mm and concavity on other side of the button would sink the knots on the button to avoid irritation.

74.05 Ramp Lasso :- A disposable suture passer with 1.5mm diameter and 25 degree angle tip with right and left combination for the use in meniscal ramp lesion repair. The lasso must contain 100cm long 2-0 UHMWPE suture stick (hardened suture) and should have wheel mechanism for advancing or retracting the suture.

74.06 Suture Anchor 1.8mm :- A knotless 1.8mm*19mm all suture anchor for labrum refixation in shoulder instability. The anchor final locking should be by knotless tensionable mechanism by pulling #2 coreless UHMWPE around the tissue and knotless locking and should be able to take both mattress and simple stitch with the same.

All Suture Anchor 2.6mm :- A knotless 2.6mm all suture anchor for rotator cuff repair medial row anchor. The anchor final locking should be by knotless tensionable mechanism by pulling #5 coreless UHMWPE around the tissue and allow knotless locking and should be able to take both mattress and simple stitch with the same.

Multifire Scorpion Needle:- A sterile , disposable needle compatible with reusable shoulder self-retrieving suture passer fastpass mechanism instruments, the width of the needle tip should be 1.5mm and it should engage #2 UHMWPE and tapes with tapered tail of #2 UHMWPE configurations

Locking X-Plate set for hallex valgus osteotomy, Titanium

Locking X-Plate for hallux valgus osteotomy,Titanium

Locking screw 2.7 mm(Head 2.4 mm)Self Tapping 10-30 mm,Titanium

Lisfranc arthrodesis plates, Titanium

2.7 mm or 3.5 mm diameter locking and non-locking screws, 12 mm to 40 mm.

Ankle arthrodesis plates, Titanium

Cortical Screw 4.5 mm, Self-tapping, Length 20 mm to 50 mm

Locking Cortical Screw 5 mm, Self-tapping, Length 20 mm to 60 mm

Bidder must submit financial bid in .xls (Excel workbook 97-2003 workbook) only

Bidders are advised to submit price only for serial No. items i.e. for 1.1, 1.2, …….25.01 only

Calculation of Local Content

Name of manufacturer Calculation by Manufacturer (Cost per unit of product)

Cost Component Cost (Domestic Component) (a) Total Cost (b) Percentage of Local Content c=(a/b)*100

III. Total Cost (Excluding tax and duties)

1. Cost (Domestic Component): Cost of domestic component may be calculated based on one of the followings depending on data available. Each of these calculations should provide consistent result.

a. Sum of the costs of all inputs which go into the product (including duties and taxes levied on procurement of inputs except those for which credit/ set-off can be taken) and have not been imported directly or through a domestic trader or an intermediary.

b. Ex-Factory Price of product minus profit after tax minus sum of imported Bill of Material used (directly or indirectly) as inputs in producing the product (including duties and taxes levied on procurement of inputs except those for which: credit/ set-off can he taken) minus warranty costs.

c. Market price minus post-production freight, insurance and other handling costs minus profit after tax minus warranty costs minus sum of Imported Bill of Material used as inputs in producing the product (including duties and taxes levied on procurement of inputs except those for which credit / set-off can be taken) minus sales and marketing expenses.

2. Total Cost: Total cost may be calculated based on one of the following depending on data available. Each of these calculations should provide consistent result.

a. Sum of the costs of all inputs which go into the product (including duties and taxes levied on procurement of inputs except those for which credit / set-off can be taken).

b. Ex-Factory Price of product minus profit after tax, minus warranty costs.

c. Market price minus pent-production freight, insurance and other handling costs minus profit after tax, minus warranty costs minus sales and marketing expenses.

Bidder must submit financial bid in .xls (Excel workbook 97-2003 workbook) only