CERTAIN B/R AND E/M REPAIRS TO MD ACCNS OF TYPE I and II QUARTERS OF CQA (ICV) AND MES UNDER AGE (I) FY EDDUMAILARAM

Amount

Taking down chowkats or frames with shutters (without taking off shutter from the frames) exc. 1.5 sqm but n exc 4.00 each.

Taking down chowkats or frames with shutters (without taking off shutter from the frames) n exc. 1.5 sqm

Resecuring or easing & adjusting without taking down Shutters of any description n exc 1 sq. m each

M&L Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

M&L Pressed steel frames for doors of size 165x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed

M&L Pressed steel frames for doors of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed

M&L plain cement concrete 1:3:6 type C1 using 20mm graded stone aggregate in bed black for hold fasts and coping incl necessary form work weathering slighly rounded or chamfered angles and treating and making good the disturbed portion complete all as specified and directed

M&L 2nd class hard wood plain framed factory made panel shutter 35 mm thick (two or three panels) with lock rail and panel of of 12mm veneered particle board with commercial veneering on both faces, the size of rail & style as per IS 1003 (Part-I) Kiln seasoned and chemically pressure treated complete all as specified and directed

M & L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

S&F MS Butt hinges medium weight cold rolled of size 100mm complete all as directed.

S&F mild steel sliding door bolts 300mm long plate stove enameled black with bright bolt not less than 12mm dia with and incl a minimum of 6 bolt and nut four on bolt plates and two on staple plate complete all as specified and directed.

Hacking out old broken glass (any thickness, size quality or description) from wooden frame or stone concrete or bricks surrounds glazed with putty or fixed with beads.

S&F 3mm thick sheet glass ordinary quality and glazing with wooden beads or oil putty in square not exc. 0.50 Sqm in each pane complete all as specified and directed

S & F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staples including removing old wire mesh complete all as directed

S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples fixed complete all as specified.

S & F solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as specifications & drawing inlcuding making good to the disturbed surfaces to match the existing and as directed by the Engineer-in-Charge

S & F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour 5mm thick PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as specifications and drawing and as directed by the Engineer-in-Charge

S & F for 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed.

S & F for 150 mm length of extruded aluminium alloy handles, fabricated type., anodised

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

M & L for brick work with sub class 'B' old size bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

Taking down of cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.,

M & L for rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth with out using extra cement complete all as specified and directed by Engineer-in-Charge.

M & L M & L for preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as spcified.

S & F in repairs Vitreous china wash basin, white flat back size 630 x 450mm including cutting for and pinning in ends of brackets or erecting stand excluding supply and fixing of 32mmdia CP waste coupling and waste pipe. complete all as specified and directed.

S & F 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed

S & F in repars Vitreous china Squatting Pan, white, 'Orissa' pattern, of size 580 x 440mm, white, with integral foot rests including CI 'P' or 'S' trap and provision of cement concrete bedding but excluding PVC flushing cistern complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, 10 lit capacity, low level, white, with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe complete all as specified.

S&F in repairs bib tap fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified

S & F 15 mm dia Pillar taps fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified

S & F 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repairs complete all as specified

S&F in repairs 15 mm dia Stop valves (angle cock), cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified

S & F in repairs Brass chromium plated shower rose 125mm dia with or without swivel joints, including fixing to steel pipe or union complete all as directed.

S&F PVC connection 15mm dia, 45 Cms long with brass ferrules on both ends fixed in repairs complete all as specified

S & F 32mm dia Waste fittings, PVC for glazed ware sinks, basins, etc with long screwed shanks and flynuts, flanged and other end fixed complete as in repairs

S&F in repairs MS barrel tower bolts of 150 mm long stove enameled black with bright bolt complete all as specified.

S & F in repairs 200 mm length of aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified

S&F in repairs 25 mm dia curtain fruted pipe, decorative type powder coated as approved complete all as specified

S&F in repairs 25 mm dia Brass brackets to curtain pipe, decorative type powder coated complete all as specified

Taking up or down steel tubing 15mm bore of pipes and connections, including cleaning for re-fixing or removal to store

S & F GI tubing 15mm bore, medium grade with all fittings and fixtures fixed to walls and ceilings or laid in floors complete all as specified.

Taking up or down steel tubing 20mm bore of pipes and connections, including leaning for re-fixing or removal to store

S & F GI tubing 20mm bore, medium grade with all fittings and fixtures fixed to walls and ceilings or laid in floors complete all as specified.

M&L in repair floor door stopper and door catches incl for vulcanised rubber piece of aluminium alloy body and tongue, anodised with hard drawn steel spring, overall length of cover plate 140mm fixed in floor complete

Demolition of cement Concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) all as specified and directed.

M&L Cement concrete 25 mm thick in type B-0 1:2:4 (12.5mm graded aggregate) as in sub base finished surfaces even and fair complete all as specified and directed.

M & L screed bed or bedding layer of mortar 1:4, 15mm thick for laying floor finishes including application of setting coat 3mm thick, trowelled to even and smooth finish in cement mortar 1:2.

M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

All as above item No 48 here in above but in skirting

M & L for coloured joint free Non skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Taking down cement plaster on brick or stone walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

M & L rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement all as specified and directed

S & F coloured Glazed ceramic tiles of size 350x250mmx7mm/ 450X350X7mm thick as in vertical surfaces such as skirtings, dados and risers of steps, etc. set and jointed in neat cement slurry and pointed in white or colour cement to match. set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tiles complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc

M & L for 20mm thick Granite slab / tiles (of any type) work (table rubbed and polished) for wall lining (veneering to wall) over and including 12mm thick in cement mortar in 1:3 and pointing with white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete as directed by Engineer-in-Charge.

M & L for 75mm thick, PCC 1:3:6, type C-1, using 20mm graded stone aggregate as in Plinth protection and footpath including necessary form work finished surfaces even and smooth complete all as specified and directed.

Dismantling old PVC water tanks exc 250 but n exc 500 ltrs capacity and removing as directed

S & F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) 500 litres capacity, double layered, hoisted and fixed in position complete all as specified and directed.

S & F 25 mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S & F gun metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors or trenches or on wall fixed with clamps including dismantling of old pipes complete all as specified and directed.

S & F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors or trenches or on wall fixed with clamps including dismantling of old pipes complete all as specified and directed.

Taking down carefully Aluminium/copper point wiring (Light/ Fan/Socket or power) complete incl fitting fixture such as switches, sockets, ceiling rose, brackets, holders, bulk head fitting etc and making good disturbed surface of wall/ceiling etc., all as specified and directed.

Taking down main switch/MCB DB by disconnecting the electric supply all as directed at site.

M&L for point wiring complete with stranded copper conductor 1.5 Sqmm size (Nominal area) PVC insulated unsheathed cable FR in and including concealed PVC conduit ISI marked not less than 20mm dia with concealed sunk in pressed steel terminal boxes of reqd size of thickness 1.6 mm factory made and painted with stove enameled black paint with top cover 3mm thick plastic laminated sheet of required colour fixed with brass screws and cup washer including 1.5 sqmm stranded copper conductor PVC insulated cable of green colour as earth continuity connected to common earth dolly and all sunk/terminal boxes and each fitting/fixture, complete with all accessories all as specified and directed for One light/fan/exhause fan point controlled by one way 5 Amp switch

All as per Item No. 65 here in above for One 3 pin/5 pin socket out let 5 Amp on independent board

All as per Item No. 65 here in above for One 3 pin/5 pin socket out let 5 Amp on same board

All as per item No 65 here in above above but independent point wiring with stranded copper conductor 2.5 Sqmm (Nominal Area) PVC insulated and unsheathed cable and one 2.5 Sqmm multistranded copper conductor PVC insulated unsheathed green in colour as earth continuity all as specified and directed

S&F switch piano, flush type 5 Amp single pole one way complete all as specified and directed .

S&F socket out let, flush type 5 Amp complete all as specified and directed .

S&F switch piano, flush type 15 Amp single pole one way complete all as specified and directed .

S&/F socket outlet multi purpose 3 pin 15 Amp and 3 pin 5 Amp, flush type.

S&F lamp holder insulated body any type with back plate suitable for batten/angle fittings as directed.

S & F ceiling rose, 3 terminals, PVC/ polycarbonate, isolated body complete all as specified.

S&F stepped type Electronic fan regulator flush type complete all as specified and directed.

M&L for repairs/Rewinding unserviceable of ceiling fans, (rewinding (copper) and replacement bearings in existing old ceiling fans) of 1400mm/1200 mm sweep, suitable for working on 230 volts, 50 Hz single phase supply including complete overhaling by provision of capacitor connecting box,connected wiring etc.complete all as specified and as directed

M&L for repairs/Rewindingof unserviceable exhaust fans, (rewinding (copper) and replacement bearings in existing old exhaust fans) of 300mm/450mm/225mm sweep, suitable for working on 230 volts, 50 Hz single phase supply including complete overhaling by provision of capacitor connecting box,connected wire etc.complete all as specified and as directed

S & F LED Panel size 600x600mm 42watts ,230volt ultra modern designed architacural LED lumainair which provides soft light and glare free symetrical illumination suitable for armstrong or fall ceiling, with LEDs including driver 1x42 Watts, with all accessories and connecting up with and including twin core twisted flexible copper conductor cable of suitable size by removing 2x2 feet false ceiling and matching existing ceiling complete all as specified and directed by Engineer-In Charge. Make : havells cat part VENUSNEOHE2X2PLR 18-42WLED830MOD/Phillips /crompton

Supply and fix surface mouting LED luminairies 1x 18 watts, 230 volts, 6500k wall/ceiling mounted type suitable for wall mounted fittings with all internal connections connector block with all accessories and connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-In Charge. Make : Havells cat LHE XACP7PN1W018 or equivalent in CG/C&S/SYSKA

17. S&F LED light fitting, 1x15w, 230v decorative wall mounting type with multicolour ABS housing with poly carbonate rings, and glass shade with 10W LED lamp (Havells) & holders, connector block, etc including lamps complete with all accessories pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-In Charge . Make : Havells Cat No : LHDL07150099 or equivalent in CG/Philips/C&S..

Taking down old U/S sub main wiring 4 Sqmm/6 Sqmm/10 Sqmm aluminium/copper including batten/conduit and making good disturbed surface to match the existing surface.

M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 4.0 Sqmm, drawn through and including suitable size PVC conduit and conduit accessories including provision of 1 run of 4.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor complete all as specified and directed. [NOTE: 3 runs of 4.0 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.]

M & L for sub main wiring with 2 runs of single core 1100 volts grade, PVC insulated, unsheathed, FRLS copper conductor cable of size 6.0 Sqmm, drawn through and including suitable size PVC conduit and conduit accessories including provision of 1 run of 6.0 Sqmm PVC insulated, unsheathed, FRLS copper conductor cable as earth continuity conductor complete all as specified and directed. [NOTE: 3 runs of 6.0 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.]

M&L for providing in replacement MCB DB of sheet metal enclosure double door type, single pole and neutral 8 way with 200 Amp rated bus bar 240V and grouted in walls with PCC 1:2:4 type B1 using 20mm graded stone aggregate all as spacified and as directed .

S & F in replacement MCB SP 6 to 32 Amps, 240V 'C' Series 10 KA.

S & F MCB DP , 240 V, 32 Amps, 'C' serie, complete all as specified and directed by Engineer-In Charge. Make : Scheinder/Legrand/Havells/C&S.

S&F Earth continuty conductor or main earthing lead fixed to wall on betten or recess or cheses or bureid in ground or drawn in conduit/pipe or fixed to poles or any indicated situation for loop earthing etc.as required 4mm galvenised wire comlete all as directed by Engr in charge.

M&L for Laying GI tubing 40 mm light grade with all fittings for cable protection fixing on poles & road/drainage crossing complete all as specified and directed by Engr-in Charge.

Earthing complete with Galvanized steel earth plate electrode of size 600x600x6mm thick buried directly in ground with earth pit not less than 2.25m deep below the normal ground level with top edge of plate not less than 1.5m below normal GL connected to GI strip 32 x 6mm as earth strip by means of bolts, nuts, check nuts and washers of Galvanized iron or steel all as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on ompletion and as directed. [Note: The unit rate shall be deemed to include for excavation & earth work in any type of soil, PCC (1:3:6) type C1 chamber, RCC 1:2:4, Type B-1 cover 40mm thick reinforced with 8mm dia CTD bars @ 75mm c/c both ways, MS handle 12mm dia, CI funnel and wire mesh, GI watering pipe 20mm dia medium grade for watering, GI protection pipe light grade 40mm dia, earthing lead upto 7.5m complete all as specified in preambles of SSR Part-II and shown in electricl plate No. 3 of SSR Part-I.]

M/S Veerabhadra Constructions