New Maize Feed Silo Elevator and Conveyor

Dismantling the Existing Maize elevator and stacking the scrap material as directed by the engineer in charge, Dismantling & Relocating the Existing chain conveyor

Supply and installation of Galvanized Silo Maize Unloading Bucket Elevator – 10” (for handling Maize, Oil Cakes & bran of particle Size 1 to 10mm). The elevator system consists of MS elevator-seamless, Bucket fixing bolts With rubber Belts and all trough sheets will be of Galvanized Iron With adequate thickness. Drive is 7.5 HP Geared Motor of SEW Make

Supply and Installation of Redler Conveyor With Drive at the outlet of the Maize Elevator. The entire Conveyor Will be Galvanized Except for the chain & will independently feed one of the silo. Drive is shaft mounted unit of SEW of 3 HP

SS Gravity Pipe 3mm thick, 250 mm dia with required no. of end flange for fixing on elevator outlet / flap approx., 6m (3m each)

Supply of SS Pneumatic type two way flap suitable for fixing on 250 mm pipe along with connecting chute with inspection door with proper locking arrangement on both side, 3mm SS Fabricated body, Rod EN8

Supply of ½” GI Pipe for air distribution to Pneumatic flaps

Supply of Solenoid valve Suitable for operating the above 2 way flap

Supply of limit Switches - 2 Nos for the flap indication

Supply and installation of suitable electrical power cable and control cables and control cables with glands, lugs clamps, isolation for connecting with the new conveyor. Existing cable can be utilized for elevator copper/aluminum cables

Required structure, Roof Sheeting and slide sheeting at the top boot of the Elevator and a bridge for the conveyor with suitable spacing for any repair/maintenance work. GI Platform with fencing and roofing

Required foundation/platform works if any/modification of existing chain conveyor for feeding to single SILO.

Modification of existing maize unloading conveyor including the related civil Works to uplift the conveyor

Existing Elevator Structural painting with initial cleaning of structure and application of one coat primer and two coat synthetic enamel paint

Installation, testing, commissioning and training of the entire set up for elevator and conveyor with all related accessories.