Construction of New Footpath and other related work at TP-52, 212, 215 area and other area of Bodakdev ward of North West Zone.(ARC) (Reinvite)

NAME OF WORK: Construction of New Footpath and other related work at TP-52, 212, 215 area and other area of

Bodakdev ward of North West Zone.(ARC) (Reinvite)

It. No. Item Description Qty Unit

Dismantling the following including loading, unloading and

disposal of unserviceable material for all lead or as directed by

Engineer-In-Charge and stacking the serviceable material and

backfilling the resulting trenches and pits complete.

a central verge -kerb stone 2 Rmt 8

Dismantling tiled or stone floors laid in mortar including

2 stacking of serviceable material and disposal of uservicalble 5 Smt 47.25

material with all lead and lifts. SOR 23-24 IT CD NO:20005

Demolition & disposal of unservisable material with all lead

c and lift for unreinforeced concrete. SOR 23-24 IT CD 2 Cmt 603.23

Demolition of brick work & stone masonry including stacking of

serviceable materials and disposal of unserviceable materials

with all lead and lift (1) In cement mortar. SOR 23-24 IT CD

Demolition including stacking of serviceable materials and

e disposal of unserviceable materials with all lead and lift. (I) 1 Cmt 1047.38

R.C.C work. SOR 23-24 IT CD NO:20002

Extra rate over item of excavation of earth for excavation of

asphalt pavement / RCC of thickness up to 0.20 meter

including demolishing the asphalt carpet, metal,s oiling/cutting

Reinforcement etc.comp. with stacking the material as

directed. (Based on Previously approved rate by C E sir )

a up to 0.20 meter thickness (By Manual) 100 Smt 71.1

0.20 to 0.30 meter (By any type of Breaker Machine or

b R.C.C.Cutter machine including cost of operator, fuel, & 10 Smt 177.76

transportation etc complete.

0.30 meter & above (By any type of Breaker Machine or

c R.C.C.Cutter machine including cost of operator, fuel, & 1 Smt 311.08

transportation etc complete.

Barricading the entire break down or excavated area on rental

basis using wooden ballies / M.S.angles at max. 2.00 meter

centre to centre, C.G.I. Sheet, reflective paint / Board out side

to avoid accident & for smooth traffic diversion & movement

4 including cautionary board etc. Item also includes for making 50 Rmt 79.99

temporary sufficient nos of lighting arrangement through out

the work with necessary required arrangement. ..The same

shall be removed after completion of work. (Only for break

down work from start to complete)

Box cutting the road surface to proper slope and camber for

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed upto

Conveyance charge of earth, lime, murrum, building rubbish,

manure, garbage, sludge, excavated rock, fly ash, aggregates of

any kind executed outside the road site. Rate also includes

spreading & levelling etc complete. Internal conveyance above

50 mt done within the work site is not payable.

a a) Lead up to 1 Km. 1 Cmt 23.38

b b) Lead From 1Km to 2 Km. 1 Cmt 30.94

c c) Lead From 2 Km to 3 Km. 1 Cmt 38.37

d d) Lead From 3 Km to 4 Km. 1 Cmt 45.52

e e) Lead From 4 Km to 5 Km. 2 Cmt 52.42

f f) Lead From 5 Km to 10 Km. 200 Cmt 78.54

g g) Lead From 10 Km to 15 Km. 50 Cmt 104.65

h h) Lead From 15 Km to 25 Km. 1 Cmt 224.99

Providing, laying, spreading and compacting graded stone

aggregate to wet mix macadam specification including

premixing the Material with water at OMC in mechanical mix

7 plant carriage of mixed Material by tipper to site, laying in cmt 2010

uniform layers in sub- base / base course on well prepared

surface and compacting with vibratory roller to achieve the

desired density as per Codal Provision.

A Production & Supply of WMM 50 Cmt 1975

B Laying of WMM 50 Cmt 35

Repairing damaged M.H. and rasing M.H. up to road level incl.

removing damaged brick work and repairing by brick masonry

8 in C.M. 1:5 and plaster in C.M. 1:3 and fixing C.I. steps and

existing MH sheet cover, removing the debris from MH and

carting the same as directed.

a (A) up to 0.15 mt. (@ Two Coarse) 5 Nos. 728.82

b (B) up to 0.35mt. (@ Four Coarse) 2 Nos. 1155.44

c (C) up to 0.65 mt. (@ Seven Coarse) 2 Nos. 1786.49

d (D) up to 0.90 mt. (@ Ten Coarse ) 1 Nos. 2150.9

Repairing damaged I.C./ Raising removing damaged brick

work and repairing by brick masonry in C.M. 1:5 and plaster in

9 C.M. 1:3 and fixing C.I. steps and existing chamber sheet cover, 1 Nos. 399.96

removing the debris from chamber and carting the same as

Providing, laying and jointing in true line and level UPVC pipe

10 (SCH-40) of following dia. Including fittings of standard make as

approved by Engineer-in-charge.

a 15mm (IT CD NO 23061) 1 Rmt 71.93

b 25 mm (IT CD NO 23062) 1 Rmt 90.93

c 40 mm (IT CD NO 23064) 1 Rmt 146.65

d 50 mm (IT CD NO 23065) 1 Rmt 193.73

Providing and supplying,and jointing ISI mark only standard

length stoneware pipes of following class and diameter

including excavation for laying of pipes, insurance,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to departmental stores,

stacking etc. compl. (IS651/1989 or its latest revision) including

labour work for lowering, laying, joiting with cement mortar

(1:1) proportion, proper postion, grade and alignment and all

level as directed by engineer in charge including store to site of

work jointing material etc complete

a 100 mm dia (IT CD NO 24001AA) 1 Rmt 211.05

b 150 mm dia (IT CD NO 24001BA) 1 Rmt 288.23

c 230 mm dia 1 Rmt 400.54

DI to PVC connection Making/ Reparing Connection work for

the following dia. PVC pipe

a 50 mm dia 1 No. 841.69

b 75 mm dia 1 No. 1006.12

c 90 mm dia 1 No. 2537.52

d 110 mm dia 1 No. 2878.82

Brick work using common burnt clay building bricks having

crushing strength not less than 35kg./Sq.Cm. In foundation and

13 plinth in Cement Mortar 1:5.(1- Cement: 5 -fine sand)(B) 1 Cmt 4011.66

Conventional.(R & B Building Road Bridge SOR 2023-24 Item

Code 06001BA,Item No.as per NBO-6.12 page no.70 )

Providing15mm thick cement plaster in single coat on Rough

(Similar) side of single or half brickwalls for interior plastering

upto floor two level and finished even and smooth in (i)

14 Cement mortar 1:3 (1-cement:3-sand) (R & B Building Road 1 Smt 174.83

Bridge SOR 23-24 Item Code 17002A,Item No.as per NBO-17.6

Providing F.R.C. MH seat cover incl. carting to the work site etc.

15 comp. Directed. (Based on rate of central store circular

F.R.C. Extra Heavy Duty (EHD-35) Manhole Covers. Cover :

728mm ø & 100 mm thick circular cover, 35.00 MT load design,

100x2mm MS flat allround, 16mm ø plain round bar for lifting

the cover & should be fitted with plastic cups.

Carting and Fixing M.H., Chamber or Catchpite Seat and Cover

in line and level to match exisisting road level in C.C. 1:2:4 and

16 finishing smooth, watering and protecting for 7 days etc. 1 Nos. 746.59

complete as directed. M.H. seat cover will be supplied

byA.M.C.(from any store)

Constructing Bombay Pattern Type Catch Pit of size 0.60 x

depth up to 1 mt including excavation, B.B.C.C. (1:5:10), 23 cms

thick brick maso. wall in the prop. of CM (1:6) with 40 mm thick

IPS flooring in the prop M15 at bottom and 15 mm thick

cement plaster inside the catch pit in the proportion of CM

(1:3) with out jali etc. comp. as directed.

Catch Pit Jali Fixing P/F FRC catch pit jali with frame 600mm x

18 600mm clear opening etc. comp.. As directed by Engineer-in-

Charge and/or his authorized representative.

A 20 MT Capacity 1 Nos. 3178.57

B 35 MT Capacity 0 Nos. 3784.82

Supplying and fixing of 380 mm H x 300 mm L x 200 mm B Kerb

block for Central Verge in M-20 grade using 20 mm nominal

size black trap aggregate of Sevaliya/Timba or equivalent

quality for pre-cast blocks, reasonably exposed finish/

formwork, mould with well equipped with vibratory system for

kerb stones of approved design including curing, etc. complete,

including the cost of formwork etc. complete. The rate shall

also include necessary cutting of asphalt, fixing the Kerb stones

in line and level on 5 cm thick sand bedding with necessary

19 equipments and materials. The rate shall also include the flush 5 Rmt 431.96

pointing in CM (1:3) for all joints of the kerbstones. Filling of

zari alone the sides of the kerb stone fixed with Bituminous

concrete mixed in proper position as directed by Engineer in

change to form a portable mixture. In any case Gravel or such

type of materials shall not be allowed for productiona) Laying

on 5 cm thick Sand Bedding

Supplying and fixing of 300 mm-L x 150 mm-B x 380 mm-H

Kerb block for Footpath in M-20 grade using 20 mm nominal

size black trap aggregate of Sevaliya/Timba or equivalent

quality for pre-cast blocks, reasonably exposed finish/

formwork , mould with well equipped with vibratory system

for kerb stones of approved design including curing, etc.

complete, including the cost of formwork etc. complete. The

rate shall also include necessary cutting of asphalt, fixing the

Kerb stones in line and level on 5 cm thick sand bedding with

necessary equipments and materials. The rate shall also

include the flush pointing in CM (1:3) for all joints of the

kerbstones. Filling of zari alone the sides of the kerb stone

fixed with Bituminous concrete mixed in proper position as

directed by Engineer in change to form a portable mixture. In

any case Gravel or such type of materials shall not be allowed

for production. a) Laying on 5 cm thick Sand Bedding

Providing, supplying and fixing pre cast C.C. blocks (M-20) edge

kerb having size of 75 x 300 x 300 mm depth and as per design

21 conveying it to the site, jointing into C:M 1:3 and racking out 20 Rmt 195.54

the joints incl. necessary excavation of asphalt, soil etc.

completed. (App Rate)

Pre cast concrete kerb Providing and fixing M25 Grade of

concrete precast exposed / Fair finish / texture finish kerb

stones of approved make as per approved sample of any size

and any type. Kerbs shall be fixed on the foundation prepared

as per approved design. The rate shall also include for erecting

and fixing the pieces in position for complete kerb system with

chamfered type of kerbs including necessary accessories of

kerb like radius kerb, angles and quadrant kerbs, droplet kerbs

22 etc. complete as per drawing. Kerb shall be fixed as paper joint 10 Rmt 1061.61

without any jointing material. However cement mortar shall be

provided at the backside of kerb stone joint. (Sample must be

approved) Cost of excavation, cutting , base , side filling shall

includes as directed engineer - incharge in above item

description as per BOQ (a) 450 hight x 600x 150 mm high

Pre cast concrete kerb Providing and fixing M25 Grade of

concrete precast exposed / Fair finish / texture finish kerb

stones of approved make as per approved sample of any size

and any type. Kerbs shall be fixed on the foundation prepared

as per approved design. The rate shall also include for erecting

and fixing the pieces in position for complete kerb system with

chamfered type of kerbs including necessary accessories of

kerb like radius kerbs, angles and quadrant kerbs, droplet

23 kerbs etc. complete as per drawing. Kerb shall be fixed as 100 Rmt 912.5

paper joint without any jointing material. However cement

mortar shall be provided at the backside of kerb stone joint.

(Sample must be approved) Cost of excavation, cutting , base

side filling shall includes as directed engineer - incharge in

above item description as per BOQ (b) 380 x 600 x 150 mm

high Footpath kerb.

Providing and fixing pre-cast concrete kerb stone of gray

cement based concrete block 30cm length,30cm height and

15cm thick of M200 grade concret as per approved design and

24 including excavation for fixing in proper line and level,filling the 1 Rmt 376.43

joint with C:M 1:3 (1cement:3fine sand) etc complete. SOR 23-

Supplying and fixing for central verge 230 mm L x 235 mm

Width x 680 mm H Supplying & Fixing in M-20 grade using

mm nominal size black trap aggregate of sevaliya/timba or

equivalent quality for pre-cast blocks,reasonably exposed

finish/formwork,mould with well equipped with vibratory

system for kerb stones of approved design including

curing,etc.complete,including the cost of formwork

etc.complete.THe rate shall also include necessary cutting of

25 asphalt,fixing the kerb stones in line and level on 5 cm thick 1 Rmt 1376.75

sand bedding with necessary equipments and materials.The

rate shall also include the flush pointing in CM(1:3)for all joints

of the kerbstones.Filling of Zari alone the sides of the kerb

stone fixed with bituminous concrete mixed in proper position

as directed by engineer in charge to form a portable mixture.In

any case gravel or such type of materials shall not be allowed

for production.

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size ; shape

(Usually Uni-Paver Blocks) using black trap good quality

aggragate of 20 mm nominal size for footpath, parking areas,

service lanes and other areas as mentioned in the

drawing / instruction of engineer in charge. Cost includes

formworks using rubber mould, Rate providing and laying

paver blocks as per required grading and specification. The

paver block shall be mechanically compacted. The work of

paving blocks shall be executed in line and level by skill mason

of flooring work only. It should be laid in such a way that the

no cutting of the paver block to be necessary. if cutting of

paver block necessary then it should be cut by machine only

and carting. The finished surface of the paver block shall have

resonably good, plain finished. Paver blocks shall be

compacted and shall be relaid if necessary. Gravel or such type

of materials shall not be allowed for production. Laying on

5cms thick sand beddding.

Providing and laying of interlocking grey paver blocks of high

density 80mm thick made from M-40 grade concrete using

mm to 20 mm machine crushed well graded stone aggregate,

sand of approved quality, OPC 53 grade cement with

contractor's own concrete mix design as approved by AMC, for

parking, road. Cost Includes formwork, using rubber/FRP

mould, laying paver block as per required grading and

specification laid paver block shall be mechanically compacted.

27 The work of the paving blocks shall be executed in line and 5 Smt 572

level by skilled mason of flooring work only. It should be laid in

such a way that the no cutting of the paver block to be

necessary. Cutting of paver block by machine cut only and

carting to be done. The Finished surface of the Paver Block

shall have reasonably good plain finish. Paver blocks shall be

compacted and shall be re-laid if necessary. Gravel or such type

of materials shall not be allowed for production. Laying on

Cms thick sand bedding.

Paver Block Providing and laying shot blasted Non -

interlocking, Paver blocks of specified thickness, size, grade of

concrete and colour machine made and blasting by automatic

shot blasting machine and high density of as per approved

sample of approved make for footpath, parking areas, service

lanes,cross over and other areas as mentioned in the drawing.

Including providing and laying 50 mm thick averave bedding

layer of coarse sand below paver block as per required grading

and specification. Laid paver block shall be mechanically

compacted. The work of the paving blocks shall be executed in

line and level by skilled mason of flooring work only. Small size

28 of paver block with same specification shall be used at residue 120 Smt 669.65

or at end. It should be laid in such a way that the no cutting of

the paver block to be necessary. If cutting of paver block shall

be required , than cut by machine only and laying to be done

by skilled flooring mason. The finished surface of the paver

block shall have coarse sand Texture Finish. Pave blocks shall

be compacted and shall be re-laid if necessary. Actual laid area

shall be measured and paid without any wastage. (A) 60 mm

thick M-35 grade Grey Paver block of size 200mm x 200mm.

Paver Block Providing and laying shot blasted Non -

interlocking, Paver blocks of specified thickness, size, grade of

concrete and colour machine made and blasting by automatic

shot blasting machine and high density of as per approved

sample of approved make for footpath, parking areas, service

lanes,cross over and other areas as mentioned in the drawing.

Including providing and laying 50 mm thick averave bedding

layer of coarse sand below paver block as per required grading

and specification. Laid paver block shall be mechanically

compacted. The work of the paving blocks shall be executed in

line and level by skilled mason of flooring work only. Small size

29 of paver block with same specification shall be used at residue 1 Smt 758.93

or at end. It should be laid in such a way that the no cutting of

the paver block to be necessary. If cutting of paver block shall

be required , than cut by machine only and laying to be done

by skilled flooring mason. The finished surface of the paver

block shall have coarse sand Texture Finish. Pave blocks shall

be compacted and shall be re-laid if necessary. Actual laid area

shall be measured and paid without any wastage. (A) 80 mm

thick M-35 grade Grey Paver block of size 200mm x 200mm.

Labour work of fixing kurb any design of central verge, (both

side) footpath kurb, items includes necessary excavation,

asphalt cutting of any thickness, erecting in line and position

30 and pointing with cement mortar (1:3), watering, etc complete, 10 Rmt 136.4

filling with zari along the side of the kurb, the kurb stone fix

prepared with bitumnious top surface, as directed by engineer

Soil Filling for Gardening/Plantation Providing and laying good

quality garden soil, obtained from outside which can be useful

for all plants as per specification. Garden soil shall be mixture

of 1 part Garden Sweet Soil 1 part Coco Peat: 1 part Well

31 Rotted Organic Compost (1:1:1) including laying of soil in 1 Cmt 898.9

required quantity and in proper slope as mentioned in

drawing, watering, compacting and dressing etc. complete, as

directed in specifications and by engineer in charge.Law

Providing and laying cement concrete 1:5:10 (1- Cement : 5-

32 fine sand : 10- graded brick bat aggregates 40mm nominal size) 1 Cmt 2492.51

and curing complete. SOR 23-24 IT NO 05006A

Providing and laying cement concrete 1:3:6 (1- Cement : 3-

Coarse sand : 6- Hand broken stone aggregates 40mm nominal

size) and curing complete. SOR 23-24 IT NO :05005A

Ready mix concreteProviding and laying in position Ready mix

concrete/ batch mix concrete of specified grade for reinforced

cement concrete work, using cement content as per approved

design mix (Min cementitious level as per latest IS 456 shall be

maintained) manufactured in fully automatic batching plant

and transported to the site of work in transit

mixer for all lead having a continuous agitated mixer, for

reinforced cement concrete work including pumping from

transit mixer to site of laying; cost of admixtures in

34 recommended proportions as per IS: 9103 to accelerate, retard

the setting of concrete, improve workability without impairing

strength and durability; finishing, compacting, vibrating, curing,

dewatering (if required), etc, excluding the cost of Formwork

and reinforcement, etc complete for all elements, all floors, all

level, any heights/ depths, any lead and lift as directed by

Engineer Incharge.

A Concrete of M 15 grade (R & B SOR 23-24 IC: 5054 Page 66) 50 Cmt 3790.21

B Concrete of M 20 grade (R & B SOR 23-24 IC: 5055 Page 66) 5 Cmt 4793.1

C Concrete of M 25 grade (R & B SOR 23-24 IC: 5056 Page 67) 0 Cmt 4853.56

D Concrete of M 30 grade (R & B SOR 23-24 IC: 5057 Page 67) 0 Cmt 5043.66

Painting Two Coats on divider and footpath curb surface / New

Concrete Surface ( Painting two coats after filling the surface

with synthetic enamel paint in all shades on new plastered

concrete surfaces)

RETRO –REFLECTORISEED TRAFFIC SIGNCautionary Warning

Sign :-Providing and fixing sign boards made out of 2mm

aluminium sheet / 4mm ACP (Aluminum composite Panel); size

90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ; reflectorised with High Intensity Prismatic

Grade retro refiectivesheeting of Type- 4 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand post of

Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as required

and frame fabricated from suitable size iron angle of 35 x 35 x

3mm; painted with bestquality epoxy coatings in black and

36 white bends. The details of symbol for each board shall be as 1 Nos. 3867.51

per the instruction of engineer in charge. The fixing at site shall

be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg

including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 7 years for

the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall be submitted

by contractor. (B) Class-B Type-4 Retro Reflective sheeting SOR

2324 IT CODE:26092B

Supplying And Fixing Jumbo bollard swiss type Made out

of 1.5 cm crc sheet height 188 cms. Bottom dia 30 cms.

Top dia 18cm. With direction plate of 45cm dia.

Fabricated as per attached drawing, pre treated with

phospheting process painted with apoxy coating

reflectorised with retro reflective sheetings specified by

M.O.R.T & H.'s latest specification.(B) High Intensity Grade.

RETRO –REFLECTORISEED TRAFFIC SIGN Regulatory /

Mandatory Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 60 cms Dia Circle as per design of IRC- 67-2012. Pre

treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy

paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with

38 bestquality epoxy coatings in black and white bends. The 1 Nos. 4573

details of symbol foreach board shall be as per theinstruction

of engineer in charge. The fixing at site shall be in 1:2:4 CC

blockof size 45 x 45 x 60 Cms. for each leg.including excavation,

curing etc.complete under the supervision of engineer in

charge. A warranty for 10 years for the Retro reflective

sheeting from original manufacturer & a certified copy of

year outdoor exposure test report from third party test lab for

the product offered shall be submitted by contractor. (A) Class-

C Type-11 Retro Reflective sheeting SOR IT CO:26094C

Facility Informatory Sign :-Providing and fixing sign boards

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 80 x 60 cms. rectangular as per design of

IRC- 7-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats

of best quality epoxy paint ; reflectorised with High Intensity

rismatic Grade retro refiectivesheeting of Type-4 as per ASTM

D-4956 and latest M.O.S.T.Specifications; 3.6mtr long stand

post of Iron Angle 75 x 75 x 6mm / 65NB Circular MS Pipe as

required and frame fabricated from suitable size iron angle of

35 x 35 x 3mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol for each board

shall be as per the instruction of engineer in charge. The fixing

at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 7 years for

the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall be submitted

by contractor. (B) Class-B Type-4 Retro Reflective sheeting. SOR

Hazard Marker Sign :-Providing and fixing sign boards made

out of 2.0 mm aluminium sheet / 4 mm ACP (Aluminum

composite Panel); size 90x30 cms. rectangular as per design of

IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats

of best quality epoxy paint ;reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 1.8mtr long stand post of

x 75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in black and white

bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be

in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

xcavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective sheeting SOR

23-24 IT CODE:26102C

Give Way Sign :-Providing and fixing sign boards made out of

2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 90 x 90 x 90 cms. equilateral triangle as per design

of IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats

of best quality epoxy paint ;reflectorised with Micro Prismatic

Grade retro refiectivesheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand post of

x 75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm;

painted with bestquality epoxy coatings in black and white

bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be

in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective sheeting SOR

Providing and fixing Swiss type bollard made out of

1.5mm CRC sheet ,height 140cms,bottom dia

23cm,top dia 12cm with direction plate of 30 cm dia

fabricated necessary anchors as directed and also provide

42 through out lengh pipe of 25 NB for the strenthing of 1 Nos. 3696

bollard and reflectorised Micro Prismatic Grade Sheet

(Type XI)and three yellow strip 6 Inches wide of Type XI

Retro reflective Sheeting, fixing with P.C.C M25 grade

concrete(Foundation size 30cm×30cm×35cm).

Direction (Junction) Sign :-Providing and fixing sign boards

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 244x122 cms. rectangular as per design

of IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats

of best quality epoxy paint ; reflectorised with High Intensity

Prismatic Grade retro refiectivesheeting of Type-4 as per ASTM

D-4956 and latest M.O.S.T.Specifications; 4.0mtr (2 Nos.) long

stand post of Iron Angle 75 x 75 x 6mm / 65NBCircular MS Pipe

as required and frame fabricated from suitable size iron angle

of 50x50x5mm; painted with bestquality epoxy coatings in

black and white bends. The details of symbol for each board

shall be as per the instruction of engineer in charge. The fixing

at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for

each leg including excavation, curing etc.complete under the

Supervision of engineer in charge. A warranty for 7 years for

the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from

third party test lab for the product offered shall be submitted

by contractor. (B) Class-B Type-4 Retro Reflective sheeting SOR

23-24 IT CODE 26098B

Providing TMT Bar FE500D reinforcement for R.C.C. Work

44 including bending,binding and placing in position complete 20 Kg 75.46

upto floor two level SOR 23-24 IT NO :05014C

Providing and setting 50 to 60 mm thick rouge kotah stone

water table in line, level and in required gradient including

mm thick beddcing in C.M. 1:6 (1 Part of cement : 6 Part of

coarse sand) with sufficient ramming consolidation. Providing

45 joints in C.M. 1:3 (1 Part of cement : 3 Part coarse sand) and

smooth pointing in C.M. 1:1 (1 Part of Cement, 1 Part of coarse

sand) including watering etc. complete and as per details in

tender specification & as directed by engineer in charge.

B Size : 1' x 1'(40 to 50 mm thick) 5 Rmt 103.52

Fabricating, supply and erecting in position Standard

Structural steel sections conforming to IS 2062 for railing

skywalk, stair, or other works using ISMB, ISA, ISMC, MS plate,

flat, square bars, pipe, square pipe, rectangular sections,

square section, tube, etc. including welding, cutting, wastage,

etc. complete. The rate is inclusive of welding rod, supply &

fixing of correct size nut, bolts, washers, including one primer

coat of red lead paint conforming IS:102 Zinc chromate paint

46 conforming to IS:104 followed by two coat of aluminium paint 1 Kg 126.68

as per IS:2339 OR enamel paint of color as selected by

engineer incharge, with all contractor's materials, labour, tools

& plants, in bolted/welded construction as directed by

Engineer-in Charge. The waste cut pieces shall not be included

in the paying quantity. The work shall be done as per drawing

and specification. The work shall be carried out as per IS:800,

Labour work for fixing interlocking blocks / any kind of

pavement on up to 50 mm th sand bedding, levelling, watering

and fixing in line & level as well cleaning the site etc.comp. as

Supply and installation of concrete bollard of size 300mm

diameter x 900mm height, constructed using M-30 concrete

and 4nos 8mm dia MS Fe500 reinforcement through the

section as directed by EIC including supply of all

Providing and fixing Tree Guard with grey exposed finish in

49 grade M-20 with nominal steel and wall thickness of 100mm.

(Approved Extra Item Rate)

a Outer Size 700X700 12 NO. 794.64

b Outer Size 900X900 10 NO. 1121

Total Amount Rs.

Total Amount Rs.