| 1 | | Material is of Stainless Steel of thickness 0.9 mm and Grade Designation X04Cr19Ni9 of IS5522/1992 ,Types of Shower is Basic ABS Showers, Inlet Length of ShowerPipe (mm) is 150 millimeter,Inlet Diameter of ShowerPipe (mm) is 15 mm, Shower diameter/ length is 75mm,Thickness of Ni-Crcoating Not less than Service Condition Number 2 of Table 3 of IS 1068/1993 (Make Jainko, Unik, L&T, HAWA, ELEMS, KHD & GM Eng.) | 50 | Number | sdostoresnr | 45 |
| 2 | | Shape of Head is Cross Recessed Counter-sunk Flat Head, Materials of Screw is Heat Treatable Steel, Tapping Method is Thread Forming, Head Diameter 4.8 millimeter, Size Destignation No. 10, Drive Style is External Hex, Length is 100 millimeter, Conformity to Specification As per IS 3566 | 300 | Number | sdostoresnr | 45 |
| 3 | | Coated nylon washer, Round in shape, Material Nylon, Inner Diameter 0.5 inch and outer diameter 0.75 inch,Tensile strength is 50 megaPascal, Surface finish Coated | 500 | Number | sdostoresnr | 45 |
| 4 | | Material is PTFE PA6, Inner diameter is 2 mm, Outer diameter 20 millimeter, Thickness is 2 millimeter, Non corrosive,Tensile strength is 30 megaPascal | 500 | Number | sdostoresnr | 45 |
| 5 | | Material of Floor trap drains is MS SHEET WITH CHROME POLISH, Shape of Trap is Round Shape, LOAD CLASSIFICATION OF DRAIN TRAP (LOAD CAPACITYIN KG PER SQUARECENTIMETER) MEDIUM DUTY 4.3KGF CM2,Anti Cockroach Grating /Fitting of same materailProvided,LENGTH of Trap in 150 mm,(Diameter in caseof circular) of Trap in 150mm (Make Jainko, Unik, L&T, HAWA, ELEMS, KHD & GM Eng.) | 150 | Number | sdostoresnr | 45 |
| 6 | Floor Drain Trap Grating with hole | Material of Floor trap drains is SS 304, Shape of Trap is Round Shape, LOAD CLASSIFICATION OFDRAIN TRAP (LOAD CAPACITYIN KG PER SQUARECENTIMETER) is LIGHT DUTY 1.6 KGFCM2 , Thickness of Trap Material in 1.25 mm, LENGTH of Trap in 150 mm, Diameter in caseof circular of Trap in 150mm (Make Jainko, Unik, L&T, HAWA, ELEMS, KHD & GM Eng.) | 100 | Number | sdostoresnr | 45 |
| 7 | | Inset Sink, Type of Sink is Single bowl without drainer plateform with sink coupling and waste pipe, Material is Austenitic stainlesssteel of GradeDesignation X04Crl9Ni9(Numerical symbol 304), Top Shape of the Bowl is Rectangular, Without Tap holes, Before forming SSSheet/Strip Thickness is 1.2-1.3, After Forming SSSheet/Strip Thickness is 0.96-1, Waste outlet Size is 40mm, Overall Sink Length 600 mm, Overall Sink Width is 450mm, Depth of Bowl is 250mm, Conformity to indian standardIS 2963/ IS 3311 (Make Jainko, Unik, L&T, HAWA, ELEMS, KHD & GM Eng., Jindal) | 20 | Number | sdostoresnr | 45 |
| 8 | | Sit-on Sink, Type of Sink is Single bowl withoutdrainer plateform with sink coupling and waste pipe, Material is Austenitic stainlesssteel of GradeDesignation X04Crl9Ni9(Numerical symbol 304), Top Shape of the Bowl is square, Without Tap holes, Without Over Flows Holes, Overall Sink Length 600 mm, Overall Sink Width is 450mm, Depth of Bowl is 200mm, Conformity to indian standardIS 2963/ IS 3311 (Make Jainko, Unik, L&T, HAWA, ELEMS, KHD & GM Eng., Jindal) | 40 | Number | sdostoresnr | 45 |
| 9 | | Diameter of open end is 6 mm, Size is 3 inch, No. of wings extension is 2 ,Body material is PVC, white in colour, | 300 | Number | sdostoresnr | 45 |
| 10 | | Material of Waste Fitting Leaded Tin Bronze conforming to Grade 2of IS 318 1962, Nominal Size of 40 mm for sink, Conform to IndianStandard IS 2963 Latest (Make Jainko, Unik, L&T, HAWA, ELEMS, KHD & GM Eng.) | 30 | Number | sdostoresnr | 45 |
