PROJECT Number 430/25_Division 24 Kilikolloor Zonal Renovation works for Anganvady having number 146

Amount

Anganvady 146 [Div.24]

OD224164/2024-2025:Picture Paint: Painting pictures on walls with Acrylic smooth exterior paint of required shade, for NEW Work. Two or more coat applied at the rate of 3.5L/10sqm over the Priming coat. The exterior primer applied @ 3.2kg/10sqm etc. complete as per the directions of the Engineer in Charge.

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

14.64.1:Finishing walls with water proofing cement paint of required shade:Old work ( one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat

14.54.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to an give even shade:One or more coats on old work

14.52.1:Painting with oil type wood preservative of approved brand and manufacture:Old work ( one or more coats)

OD226683/2024-2025:Supplying and fixing 20mm thick ready made PVC door [ 75cm*200cm or nearest) with frame 50*42 mm including conveyance,cost of fitting , labour for fixing etc.

OD226718/2024-2025:Removing existing interlocking paver block manually including stacking of serviceable material

51.2.3:Filling with Quarry Muck <br> Filling up low lying and water logged areas with local material/ quarry muck, spreading in layers, leveling the top at site and consolidation by ramming, etc complete for improving the CBR value of subgrade

OD227521/2024-2025:Providing and laying 60mm thick DEPARTMENTAL cement concrete Interlocking Paver block of M30 grade made by block making machine with strong vibratory compaction, of approved size, design and shape, laid in required colour and pattern over and including 50mm thick compacted bed of 6mm chips filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

OD235515/2024-2025:Providing and fixing Aluminium powder coated profile sheets (size, shape and pitch of corrugation as approved by Engineer-In-Charge). 0.40mm(+0.05%) sheet should have protective guard film of 25microns minimum to avoid scratches during transportation and should be supplied in single length up to 12m or as desired by Engineer-In-Charge. The sheet shall be fixed using self-drilling / self-tapping screws of size 5.5mmX55mm with EPDM seal, complete upto any pitch in horizontal or vertical or curved surface excluding the cost of purlins, rafters and trusses; including cutting to size and shape where-ever required.

21.5:Providing and fixing powder coated aluminium work ( minimum thickness of powder coating 50 micron) consisting of tee /angle sections, of approved make conforming to IS : 733 in frames of false ceiling including aluminium angle cleats with necessary C.P brass/ stainless steel sunk screws, aluminium perimeter angles fixed to wall with stainless steel rawl plugs @ 450 mm centre to centre and fixing the frame work to G.I level adjusting hangers 6 mm dia. with necessary cadmium plated machine screws all complete as per approved architectural drawings and direction of the Engineer-in-Charge ( level adjusting hangers, ceiling cleats and expansion hold fasteners to be paid for separately ).

50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)

21.6:Providing and fixing 6 mm dia. G I level adjusting hangers ( upto 1200 mm length), fixed to roof slabs by means of ceiling cleats made out of G.I flat 40x3 mm size 60 mm long and stainless steel expandable dash fastener of 12.5 mm dia and 50 mm long, complete as per direction of Engineer -in-Charge.

13.71:Lettering with black Japan pint of approved brand and manufacture

Swagath, Government Contractor (BID ID -2072723)

K Pavanan (BID ID -2074782)

Bidder Name

K Pavanan

BIJU S

Swagath, Government Contractor