CAD Work to Lift Irrigation Scheme Kangain in Tehsil Jaisinghpur Distt. Kangra HP

Amount

Excavation in foundation trenches etc.( for pipes and pits)up to all depths in all kind of soil such , as pick work, jumper work saturated soil including bailing or pumping out water, blasting soft/hard rock or chiselling soft /hard rock where blasting is prohibited in all leads & lifts including triming & dressing of sides levelling of beds to correct grade including shorting struttering planking timbering and dewatering where ever required stacking usable/unusable material / soil separately and after laying jointing and testing of pipes returning the usable soil in trenches in 15cm layers including consolidating of such deposited layer by ramming & watering & then disposing of all surplus excavated earth as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of a diversion for traffic night signals,fixing caution boards crossing over trenches for access to houses fencing etc. as per direction of Engineer-in-Charge with in all leads and lifts.

Laying, jointing and commissioning of HDPE (High Density Polyetnylene pipes ) of following diameter and class confirming to IS 4984-1995 with fusion welding process including all necessary fitting s,Tees & bends of alldegree in all leads and lifts to outlet chamber to control the water for distribution system in all leads and lifts to the entire satisfaction of Engineer in charge (Earth work in trenches to be measured and paid separately)

HDPE-80 PN-4

180 mm dia PE 80 PN-4

160 mm dia PE 80 PN-4

140 mm dia PE 80 PN-4

125 mm dia PE 80 PN-4

90 mm dia PE 80 PN-4

HDPE-80 PN-6

180 mm dia PE 80 PN-6

160 mm dia PE 80 PN-6

140 mm dia PE 80 PN-6

125 mm dia PE 80 PN-6

Providing & Fixing and commissioning of PVC Control valve of reputed make in outlet chamber to control the water for distribution system in all leads and lifts to the entire satisfaction of Engineer in charge.

110 mm dia

90 mm dia

Providing & Fixing HDPE Teees & Reducers acessories complete in all respect. all leads and lifts to the entire satisfaction of Engineer in charge

180X 180X 90 mm Dia

160X 160X 90 mm Dia

140X 140X 90 mm Dia

Providing & Laying cement concrete 1:4:8 ( 1 cement :4 approved sand :8 approved graded stone aggregate 40mm nominal size ) & curing complete excluding the cost of form work in foundation and plinth as per direction of Engineer-in-Charge with in all leads and lifts.

Providing and laying cement concrete work 1:1/1/2:3 (1 cement: 1/1/2 sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of from work and reinforcement for reinforced concrete work in.

Foundation footing bases of columns etc.and like the mass concrete as per direction of Engineer-in-Charge with in all leads and lifts.

Wall (any thckness but not less than 0.10 metre thickness) including atteached pilasters buttersses,plinth and string courses etc.from top of foundation upto floor two level as per direction of Engineer-in-Charge with in all leads and lifts.

Providing and laying cement concrete work 1:1/1/2:3 (1 cement: 1/1/2 sand: 3 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of from work and reinforcement for reinforced concrete work in.

Suspended floor roofs,landing and shelves and their support balconies,beams,girders,bressumers and cantilever upto floor two level as per direction of Engineer-in-Charge with in all leads and lifts.

Providing, Laying mild or tor steel reinforcement for RCC. Work including bending binding and placing in position complete upto floor two level Tor steel in all leads and lifts.

Providing form work with steel plates 3.15milimetres thick welded with angle iron in frame 30x30x5 mm, so as to give a fair finish including centring, shuttering ,strutting and propping etc. with wooden battens & ballies, height of propping & centring below supporting floor to ceiling not exceeding 4.00 metres & removal of the same for in situ - reinforced concrete & plain concrete work in :-

Vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters, buttresses, plinth and string courses and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

Flat surfaces such as soffits & suspended floors,roofs and the like complete in all respect as per direction and to the entire satisfaction of the Engineer-in-charge.

SANJIV KUMAR

Ravinder Kumar Sahore

RANDEEP SINGH GOVT CONT