Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.3 LAccepted-AOC | ₹14.3 L | L1 | Accepted-AOC L1 |
| 2 | L2₹17.3 LRejected-Finance | ₹17.3 L | L2 | Rejected-Finance Rejected (Highest) |
| 3 | L3₹18.2 LRejected-Finance | ₹18.2 L | L3 | Rejected-Finance Rejected (Highest) |
| 4 | Rejected-Technical | - | - | Rejected-Technical Rejected |
| Sl No | Description | Qty | Unit | popular pipes L1 | H.N.SINGH AND COMPANY L2 | Akarshan Jaswal L3 |
|---|---|---|---|---|---|---|
| 1.00 | Transportation of Rig along-with allied accessories etc.complete including erection and levelling at site through all kind of roads,approaches field etc.in all leads and lifts upto site of work complete in all respect. | 1 | Each | 10,000 ₹10,000 | 20,000 ₹20,000 | 25,000 ₹25,000 |
| 2.00Drilling of bore as per specifications laid down in IS-2800-1991(Part-I) with uptodate ammendments,if any;with Percussion Rig or combination drilling Rig starting with 650-600mm.dia M.S.Pipe reduced to 450-400mm.dia M.S.pipe confirming to IS-4270-2001 with uptodate ammendments,if any in all kinds of soils,boulders,rocks, collapsible strata,saturated soil, artesian conditions including the cost of all consumables,stores, water, fuel, lubricants and other accessories etc.complete in all respect. | ||||||
| 2.01 | Drilling and lowering of M.S.casing pipes 650-600mm.dia confirming to IS-4270-2001 with uptodate ammendments, if any of suitable sizes as mentioned above from 0 to 30 Metres below ground level. | 30 | Per Metre | 1,000 ₹30,000 | 5,000 ₹1.5 L | 5,200 ₹1.6 L |
| 2.02 | Drilling and lowering of M.S.casing pipes 600-550mm.dia confirming to IS-4270-2001 with uptodate ammendments, if any of suitable sizes as mentioned above from 30 Metres to 60 Metres below ground level. | 30 | Per Metre | 3,000 ₹90,000 | 5,500 ₹1.6 L | 5,800 ₹1.7 L |
| 2.03 | Drilling and lowering of M.S.casing pipes 550-500mm. Dia confirming to IS-4270-2001 with uptodate ammendments, if any of suitable sizes as mentioned above from 60 Metres to 100 Metres below ground level. | 40 | Per Metre | 6,000 ₹2.4 L | 6,000 ₹2.4 L | 6,500 ₹2.6 L |
| 2.04 | Drilling and lowering of M.S.casing pipes 550-500mm. Dia confirming to IS-4270-2001 with uptodate ammendments, if any of suitable sizes as mentioned above from 100 Metres to 140 Metres below ground level. | 40 | Per Metre | 7,800 ₹3.1 L | 6,500 ₹2.6 L | 7,200 ₹2.9 L |
| 3.00 | Collection,preservations and display of suitable size sample box with top lid and locking arrangem,ent till handing over of the Tube-Well to the Department complete in all respect. | 1 | Each | 1,000 ₹1,000 | 1,200 ₹1,200 | 1,000 ₹1,000 |
| 4.00 | Supply and lowering of IS-Marked "Electric Resistance Welded Mild Steel Pipe 300mm.nominal size housing, 8mm. thick having outside diametre 323.9mm.screwed and socketted confirming to IS-4270-2001 with uptodate ammendments, if any, about 4.00 Metres to 7.00 Metres in length,welded without any circumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles clamps embedded in foundation etc. including cost of all cuttings,threading and welding of pipes etc.complete in all respect. | 70 | Per Metre | 6,350 ₹4.4 L | 6,300 ₹4.4 L | 6,600 ₹4.6 L |
| 4.01 | Supply and lowering of IS-Marked "Electric Resistance Welded Mild Steel Slotted Pipe 300mm.nominal size housing, 8mm. thick having outside diametre 323.9mm.screwed and socketted pipe confirming to IS-4270-2001 with uptodate ammendments, if any, about 4.00 Metres to 7.00 Metres in length should have 1600 slots per Metre as per IS-8110:1985 of 75x1.57mm.slot size, welded without any circumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles clamps embedded in foundation etc.including cost of all cuttings,threadings and welding of pipes etc.complete in all respect. | 10 | Per Metre | - | 7,500 ₹75,000 | 7,500 ₹75,000 |
| 5.00 | Providing and fixing M.S.Taper/Reducer as per lengths approved by the Engineer-in-Charge. The material of M.S. taper/reducer shall be equivalent to prevent pipe material and shall conform to Chemical composition as per Clause-5.2 and Mechanical properties as per Clause-6.1 and Table-1 of IS:4270-2001 with uptodate ammendments, if any, complete in all respect. | 1 | Each | 2,000 ₹2,000 | 1,500 ₹1,500 | 2,000 ₹2,000 |
Tender Value
₹20.2 L
EMD Value
₹37,815
Closing Date
17 Jul 2025, 11:00 amClosed
EXECUTIVE ENGINEER
EE JSV Division Indora
C/O Tube Well Surajpur and Tube Well Paniala sub head Drilling lowering and development of 01 No. Tube Well at Village Chanour 140 MtrDeep
2025_HPIPH_109718_1
EE-JSV-IND-2743-90 dated 08-07-2025
Open Tender
Civil Works
Indora
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
₹37,815
29 Dec 2025
8 Jul 2025
17 Jul 2025
8 Jul 2025
17 Jul 2025
8 Jul 2025
Amount
Transportation of Rig along-with allied accessories etc.complete including erection and levelling at site through all kind of roads,approaches field etc.in all leads and lifts upto site of work complete in all respect.
Drilling of bore as per specifications laid down in IS-2800-1991(Part-I) with uptodate ammendments,if any;with Percussion Rig or combination drilling Rig starting with 650-600mm.dia M.S.Pipe reduced to 450-400mm.dia M.S.pipe confirming to IS-4270-2001 with uptodate ammendments,if any in all kinds of soils,boulders,rocks, collapsible strata,saturated soil, artesian conditions including the cost of all consumables,stores, water, fuel, lubricants and other accessories etc.complete in all respect.
Drilling and lowering of M.S.casing pipes 650-600mm.dia confirming to IS-4270-2001 with uptodate ammendments, if any of suitable sizes as mentioned above from 0 to 30 Metres below ground level.
Drilling and lowering of M.S.casing pipes 600-550mm.dia confirming to IS-4270-2001 with uptodate ammendments, if any of suitable sizes as mentioned above from 30 Metres to 60 Metres below ground level.
Drilling and lowering of M.S.casing pipes 550-500mm. Dia confirming to IS-4270-2001 with uptodate ammendments, if any of suitable sizes as mentioned above from 60 Metres to 100 Metres below ground level.
Drilling and lowering of M.S.casing pipes 550-500mm. Dia confirming to IS-4270-2001 with uptodate ammendments, if any of suitable sizes as mentioned above from 100 Metres to 140 Metres below ground level.
Collection,preservations and display of suitable size sample box with top lid and locking arrangem,ent till handing over of the Tube-Well to the Department complete in all respect.
Supply and lowering of IS-Marked "Electric Resistance Welded Mild Steel Pipe 300mm.nominal size housing, 8mm. thick having outside diametre 323.9mm.screwed and socketted confirming to IS-4270-2001 with uptodate ammendments, if any, about 4.00 Metres to 7.00 Metres in length,welded without any circumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles clamps embedded in foundation etc. including cost of all cuttings,threading and welding of pipes etc.complete in all respect.
Supply and lowering of IS-Marked "Electric Resistance Welded Mild Steel Slotted Pipe 300mm.nominal size housing, 8mm. thick having outside diametre 323.9mm.screwed and socketted pipe confirming to IS-4270-2001 with uptodate ammendments, if any, about 4.00 Metres to 7.00 Metres in length should have 1600 slots per Metre as per IS-8110:1985 of 75x1.57mm.slot size, welded without any circumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles clamps embedded in foundation etc.including cost of all cuttings,threadings and welding of pipes etc.complete in all respect.
Providing and fixing M.S.Taper/Reducer as per lengths approved by the Engineer-in-Charge. The material of M.S. taper/reducer shall be equivalent to prevent pipe material and shall conform to Chemical composition as per Clause-5.2 and Mechanical properties as per Clause-6.1 and Table-1 of IS:4270-2001 with uptodate ammendments, if any, complete in all respect.
Supply and lowering of IS-Marked Electric Resistance Welded Mild Steel pipe 200mm.dia nominal size housing, 6.4mm.thick having outside diametre 219.1mm.screwed and socketted confirming to IS-4270-2001 with uptodate ammendments, if any, about 4.00 Metres to 7.00 Metres in length, welded without any circumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles, clamps embedded in foundation etc. including cost of all cuttings, threadings aqnd welding of pipes etc.complete in all respect.
Supply ands lowering of IS-Marked Electric Resistance Welded Mild Steel slotted pipe 200mm.dia nominal size housing, 6.4mm.thick having outside diametre 219.10mm.screwed and socketted confirming to IS-4270-2001 with uptodate ammendments, if any, about 4.00 Metres to 7.00 Metres in length pipe should have 1040 slots per metre as per IS-8110:1985 of 75x1.57mm.slot size, welded without any circumferential joints into bore hole in vertical position including cost of all scaffolding derricks, poles clamps embedded in foundation etc.including cost of all cuttings, threading and welding of pipes etc.complete in all respect.
Providing and fixing of M.S.centralized guides at suitable spacing for each Tube-Well as per IS-226-1991 with uptodate ammendments, if any complete in all respect.
Supply,lowering,fixing and lowering in position IS-Marked Mild Steel bail plug of 200mm/330mm. Diametres with 'U' hooks as per IS-2800-1991 with uptodate ammendments,if any complete in all respect.
Providing,fikxing and lowering in position threaded iron cap with locking arrangements of approved design to prevent foreign matter from getting into bore hole as required complete in all respect.
Supply and packing of gravel consisting of hard quartz or other suitable material with an average specific gravity of not less than 2.5, not containing more than 2% by weight of thin flat or stangated pieces shall be of sub rounded grains with minimum anuglar features of size 2-3.35mm.shall be free from impurities such as; shafe,shale mica, felspar, clay, sand, dit loam haematite and organic materials as per IS-4097-1967 with uptodate ammendments, if any arround intake of Tube-Well with minimum thickness of shroud around screen generally 100mm. to the entire depth of the bore as per IS-2800(Part-I):1991 with uptodate ammendments, if any, complete in all respect.
Development of Tube-Well by backwashing method with Air Compressor of minimum 750CFM capacity Pumping pipe of 200mm. Size and Air line of minimum 65mm size or with other suitable method, till the Well is thoroughly developed as per Clause-4.2 of IS-11189:1985, with upto date ammendments, if any; complete in all respect.
Development of Tube-Well by continuous over Pumping method with V.T.Pumps/Submersible Pumps of suitable capacity not less than double the discharge established by the Compressor method/design discharge, untill the well sand free as per IS-11189:1985 with uptodate ammendments, if any; complete in all respect as per the directions of the Engineer-in-Charge. The draw-down and discharge to be established by running the VT/Submersible pump continuously for 8 Hours in the presence of the officer not less than the rank of the Assistant Engineer.
Testing the vertcality of the Tube-Well as per Clause-4.3 of IS-2800(Part-II)-1979 with uptodate ammendments, if any, using plumb or plunger 6mm.smaller in dia within the inside diameter of the Well casing. The result of the verticality test shll be recorded on proforma shown in Appendix-A of IS:2800(Part-II)-1979 with uptodate ammendments, if any.
Dismentalling of Rig or other allied, accessories after completion of job complete in all respect.
H.N.SINGH AND COMPANY (BID ID -534599)
Akarshan Jaswal (BID ID -535321)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid