WD/2025-26/3T-1/888

EI work for 4nos. Security Room of Staff quarter , Bot-tala Sub -Stn. , Chemistry-Botany and RS Hall North end including EI work at Bot-tala Sub-Stn.for boundary light & Chemistry H-M Line & back side of Chemistry Auditorium hall boundary light line with allied works, KU .

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sq.mm) single core multistrand FRLSH / FR PVC insulated & unsheathed single core multistrand copper wire Gloster / Finolex (Gold) / Polycab make in 20mm dia 3 mm thick FR PVC rigid conduit Precision Medium (MMS) (Preffered) / 19 mm bore 3 mm thick polythene Pipe as per office supply sample complete embedded in wall with 1.1 KV grade 1x22/0.3 (1.5 sq.mm) single core multistrand FRLSH / FR PVC insulated & unsheathed single core multistrand copper wire as ECC Gloster / Finolex (Gold) / Polycab make also with all accessories embedded in wall like PVC Circular box with top Cover Precision make / CI circular box with PVC top cover precision make embedded in wall , 3 Pole Ceiling rose Anchor make with screw as per sample provided , 240V Anchor make 6A 1 way piano key type switch & 6A 1 way piano key type bell push switch , required size switch board 16 SWG CRC Sheet metal that to be embedded in wall with 3mm thick bakelite top cover (Wall matching colour ) after making housing for switch & socket & brass screws with washer including making connection complete with 3 nos. suitable size bakelite insulated `Ph ,N & E` copper bar also including S&F CRC 16 SWG 175mm x 100mm x 65mm inspection box embedded in wall & fixed on the inspection box with 3 mm thick bakelite top cover & brass screws with washer as per instruction of EIC & making earthing attacment also mending good damages & possible original finish and removing the rubbishes.(E-9/2)

NB- i) All Neutrals & Earths should be run from switch Board ii) All 16SWG sheet Metal boxes should be concealed & fixed 3mm thick balelite top cover by brass screw with washer iii) Concealed Pipe should be Precision make medium .

2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC.

Average run 5 mtr

Average run 6 mtr

Average run 7 mtr

Average run 8 mtr

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sq.mm) single core multistrand FRLSH / FR PVC insulated & unsheathed single core multistrand copper wire Gloster / Finolex (Gold) / Polycab make in 20mm dia 3 mm thick FR PVC rigid conduit Precission Medium (MMS) (Preffered) / 19 mm bore 3 mm thick polythene Pipe as per office supply sample complete embedded in wall with 1.1 KV grade 1x22/0.3 (1.5 sq.mm) single core multistrand FRLSH / FR PVC insulated & unsheathed single core multistrand copper wire as ECC Gloster / Finolex (Gold) / Polycab make and also with all accessories embedded in wall to 240V 6A 3Pin plug socket piano key type Anchor make including S&F 240V 6A 3 Pin piano type plug socket & piano type switch 6A Anchor make on the existing switch board with bakelite top cover 3 mm thick after making housing for switch & socket by brass screws with washer also including S&F earth continuity wire metal switch board with top cover plate (Cover plate should be included withinMetal flushed switch board ) and also making connection complete. (E-10/4.i)

On Board

Cutting Channel of sizes (40 mm x 40 mm) / (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing 20 / 25 mm dia 3 mm thick PVC rigid Conduit Precision make Medium / heavy gauge 19 / 25 mm dia 3 mm thick Polythene pipe as per office supply sample embedded in wall by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG including supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles for the following sizes Pipes - (For circuit drawing & Point wiring / as per requirement of Job / as per instruction of EIC) [E-3/6a] NB - All rubbishes should be removed from work site & also Tee & Elbow should not be use in the conceal pipe,

20 / 19 mm dia 3 mm thick PVC rigid conduit prcision make (MMS) / 3 mm thick polythene pipe (as per office Supply sample) without earth continuity wire. (E-3/6a)

25 mm dia PVC rigid conduit prcision make (MMS) / 3 mm thick 25 mm dia polythene pipe 25 mm dia (as per office Supply sample) without earth continuity wire. (E-3/7a)

Supplying and fixing PVC Rigid Conduit 'FR' [Precision Make] medium on wall, ceiling with saddles and other accessories as required and mending good damages to building works & removing the rubbishes . NB - Should be use Precision make shaddle & the saddles should be fixed at 325mm interval . 20 mm size (E-16/7a)

25 mm Size (E-16/7b)

Supplying & fixing socket type fan regulator (Step Type) Anchor make on existing sheet metal switch board with bakelite / perspex top cover by screw after making housing for regulator knob by cutting bakelite / perspex top cover including making necessary connections etc. (E-6/18.a)

S&F 240 V 1 No 20 A Plug Socket with separate 1 No 20 A Piano key type switch flush type & indicator (Anchor make) on Sheet metal switch board embedded in wall incl S & F 200 x150 x 65 mm on MS CRC (16 SWG) switch board with bakelite top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite cover and making necy. connections as reqd. as to GS ( NS)

Supplying & fixing 240V 20A flush (Piano) type Socket 5/6 pin Anchor make on 16 SWG CRC sheet metal switch board embedded in wall including S & F 100x100x65 mm CRC sheet metal 16 SWG switch board and bakelite / perspex top cover of 3mm thick by brass screws after making housing for socket by cutting bakelite top cover and making necessary connections as reqired. (NS) (For AC machine & Projector)

Supplying & fixing 240V 20A flush (Piano) type Switch Anchor make on 16 SWG CRC sheet metal switch board embedded in wall including S & F 100x100x65 mm CRC sheet metal 16 SWG switch board and bakelite / perspex top cover of 3mm thick by brass screws after making housing for socket by cutting bakelite top cover and making necessary connections as reqired. (E-4 / 17 b]) (For AC machine & Projector / Gyser )

Supplying & fixing PVC rigid conduit precision make medium (MMS) / Polythene pipe as per office supply sample complete with fittinggs as necessary under ceiling / beam , bound with 22 SWG GI binding wire including supplying & drawing 1x18 SWG GI wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet 20 SWG having colour paint at one face fastened at the load point end of PVC rigid conduit / polythene pipe with fish wire(synchronizing with roof / beam casting work of building construction

20 mm dia rigid conduit / 19mm dia 3 mm thic polythene pipe (E-2/1.b)

25 mm dia rigid conduit / 25mm dia 3 mm thic polythene pipe (E-2/ 1.c)

40 mm dia 3 mm thic polythene pipe (For Floor laying cable) (E-2/1.e)

50 mm dia 3 mm thic polythene pipe (For Floor laying cable) (E-2/1.f)

Supplying & fixing 3 hole facility CI water proof type looping cable box size 200 x 150 x 100 mm deep having hinged CI top cover with 4 mm thick rubber gasket lining railway type mechanical locking arrangement earthing terminal , porceline fuse etc complete. fixed on wall in concealed / embedded or at Pole with fabricated iron frame made with 32x6 flat for PCC / RCC / Tubular Pole including S&F pole clamp made with 32x6 mm MS flat with drilled holes nut bolts complete.[ NS ] NB- CI loop box should be fitted in the flange of GI / MS 50x50x6mm / 40x40x6 mm angle with 2 nos. extension piece of 25x6 mm GI flat with 1/4``x2`` GI nut bolts & heavy type GI washers / as per instruction of EIC including drilled holes complete

Supplying and fixing MCB 2 / 4 Way SS Enclosure type Distribution board with IP-20/30 protection powder coated provision , Ref. no. -8GB32100RC02 / 8GB32100RC04 ( Make - Siemens ) fixed in wall concealed / with iron frame including painting after cutting wall & mending good damages to finish including necessary connection with earthing attachment as per GS

4 Way Ref. no. -8GB32100RC04 (D-9/11 4 way)

2 Way Ref. no. -8GB32100RC02 (D-9/11 2 way)

Supplying & fixing 230V 50Hz 48`` (1200 mm) sweep ceiling fan with double ball bearing , Copper wound Crompton make High Speed (HS) 1 Star ISI mark model complete with blades 3 nos. , froke , rubber bush etc as required & without regulator including S& F 3X1.5 Sq.mm flexible Cu. wire and making connection complete for the following requirements. (NS)

230V 50Hz 48`` (1200 mm) sweep ceiling fanCrompton make High Speed (HS) 1 Star ISI mark model Brown Colour.

Supplying & fixing AVENUE 100 LED Street Light luminaries K-LITE Make Cat Ref. - AVENUE 100 ID 4392 Projected from the existing H type Angle structure with S&F fabricated 2 nos U type MS clamp made with 50x6mm GI / MS flat with suitable bend for holding the S&F 40 mm dia GI pipe ISI medium Bansal / Zindal / Neijon make Arm Bracket 2.0 mtr length , including drilled holes ,nut bolts (13mm dia 50 / 75 mm long ) & washers complete , that will be projected from H type Angle structure / pole / Bldg. complete also with S&F 40 mm dia GI (ISI medium) pipe Zindal / Bonsal / Neigon make arm bracket 2.0 mtr average length ( 0.7+1.3 mtr) & suitable bend (120 - 150 degree) etc as required / as per instruction of EIC including making connection complete with S&F 3 core 1.5 sq.mm Cu. round type industrial cable also mending good damages & finish. (NS)

Supplying & fixing sheet steel fabricated Cable end box made with 16 SWG CRC Sheet on the top & bottom of the TPN SFU enclosure with nut bolts as per size of SFU and length at least 200 - 250mm height including powder coated painting for the following sizes SFU.

Suupplying & fixing SS Encloosure type Siemens make 415V 100A SFU 3PN 3KL8211-5TA10 with 3nos Din type HRC fuse 250A fixed in wall with fabricated MS 35x35x6mm Angle iron frame / chair i.e made with 35x35x6mm MS equal angle with 4 nos leg 250mm length each and the frame / chair should be as per size of SFU (Width & Depth) & also penting the angle frame & chair including mending good damages & possible finish . (NS)

Supplying & Fixing sheet metal inspection box (16 SWG) of the following sizes flushed in wall by housing the same after cutting brick wall incl. making earthing attachment, painting and mending good damages to building works and also removing rubbises from work site .

100 mm x 100 mm x 65 mm (E-4/11.a)

150 mm x 100 mm x 65 mm (E-4/11.b)

175 mm x 100 mm x 65 mm (E-4/11.c)

200 mm x 150 mm x 65 mm (E-4/11.d)

Supply & Fixing bakelite / perspex top cover / PVC top Cover white colour with smooth finish as per instruction of EIC on existing switch board / inspection box by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required

100mm x 100 mm x 65mm (E-5/13.a)

150 mm x 100 mm x 65 mm [E-5/13.b]

175 mm x 100 mm x 65 mm [E-5/13.c]

200 mm x 150 mm x 65 mm ( E -5/13.d )

Supply & delivery including laying in existing trench / space of 4 Core XLPE Insulated & Sheathed Armoured Aluminium power cables for Working Voltage up to 1100 Volts of following sizes [ Make Gloster] [NS]

4 Core 10 Sq.mm

4 Core 16 sq.mm

4 Core 25 sq.mm

4 Core 35 sq.mm

Supplying and fixing compression type gland complete with brass gland , brass ring & rubber ring for dust & moisture proof entry of XLPE / PVC armoured cables as below Dowels make glands Long Nose type

4 Core 10 Sq.mm (F-4/c)

4 Core 16 sq.mm (F-4/c)

4 Core 25 sq.mm (F-4/c)

4 Core 35 sq.mm (F-4/c)

Finishing of the 3.5 / 4 core XLPE / PVC insulated armoured cable ends by crimping method incl. supplying & fixing solder less socket (DOWELS) make , tapes , anticorrosive paste & jointing materials .

4 Core 10 Sq.mm (F-5/8.b.xvi)

4 Core 16 sq.mm (F-5/8.b.xvii)

4 Core 25 sq.mm (F-5/8.b.xviii)

4 Core 35 sq.mm (F-5/8.b.xiii)

Supplying & fixing Open Execution Type -FN(TPN) SDF suitable for Din fuse link of 100A 415V FN 100 TPN Cat no. - SK95568 LK make in the existing feeder pillar vaccant chamber with providing newly fixing support / existing support including S&F 32x6 mm GI flat / MS flat / required size flat as fixing support also including drilled holes complete & also S&F nut bolts with washers and making connection with the main busbar by the electroliting graded Cu. flat Size 25x5(4.6) mm with suitable bend including drilled holes complete in the 25x5mm Cu. flat & also main busbar (if required) .

Supplying & fixing 230V LED Bulb 9.0W Philips make

Supplying & fixing electroliting graded 25x5mm Cu. Flat with suitable bend as per requirement for connection of SFU with main busbar including S&F 25x5mm Cu. Flat ,nut bolt & washers ctc complete / as required

Extra for suspention exceeding 25 cm with S&F additional 2 nos 20mm dia 14 SWG EI conduit supports & necessary PVC insulated wire & panting etc as required by 3x1.5 sq,mm PVC insulatedmultistrand round copper cable / wire of 1.10mtr. Length as per GS (C-2/16) .

Supplying & installation CPRI approved double door two part type hinged system busbar with SFU controlled panel that fabricated by the 14 SWG (2.0mm thick) CRCA sheet , IP-52 Protection including detouchable plate at Top & Bottom portion 14SWG sheet on wall in conceal / angle iron frame made with 35x35x6 mm MS equal angle & the Busbar (415V 250A) that controlled with 415V 100A SFU . ((Drawing should be provided during execution of job) ,and at the top end on the door should be fitted 3 nos LED indication lamp i.e R , Y & B L&T / Siemens make that controlled by the 6A SP MCB C series 10KA Siemens / Legrand / L&T make & wired by the required size (1.5sqmm) Cu. wire Polycab / Gloster make and the Panel should be painted 9 tank treated Siemns grey powder coated paint .(NS)

The size of the busbar with SFU controlled distribution type panel board - 950 x 500 x 250 - 300 mm (Approx) and consist with a) 415V 100A SFU , Type FN 100 TPN , Cat no. - SK95568 - 1 no. with 3 nos Din type HRC fuse 100A capacity and the TPN Copper busbar 415V 250A made with electro;iting graded Cu. flat / bar & size of the Cu. flat / busbar - 25 x 6 x 350 mm - 4 nos for R , Y , B & N , the flats / bars should be fitted on the 1100V graded 300A capacity DMC / SMC insulator base , the 415V 100A SFU should be connected with the main busbar 25x6mm by the same size Cu. flat i.e 25x6mm copper flat. including sufficient nos.of drilled holes & nut bolts complete (at least 6 nos drilled holes) and the busbars should be covered with the different coloured PVC heat shrinkage sleeve as per norms and the door of the panel should be locked by the 2nos. rotary turn lock type lock.

Supplying & fixing CI Water proof looping cable box with 4 way Motor terminal block 1100V grade 100A capacity heavy type having hinged CI top cover & 4 mm thick rubber gasket lining , rail way type mechanicl locking arrangement fixed in wall in concealed after cutting wall including mending good damages for the following sizes looping cable box -

250x250x100mm CI Looping cable box with 4 way terminal Block. (NS)

Supplying & fixing following mounting rail ECO-I industrial lighting batten siutable for surface / Suspended mounted type Crompton make Cat no. IGP161LT8-16 1X T8 for fixing LTT8-20 T8 Tube light in built driver and efficiency 100 lm / w including S&F LTT8-20 LED tube light complete set / fittings (Batten & Tube) to be fixed in wall on ceiling / beam suspended 25 cm below the ceiling with 2 nos. 20mm dia EI conduit (14 SWG) supports also with 2 nos. U type GI clamp made with 31mmx3mm GI flat and suitable size of fastener (as per sample to be provided) including S&F fabricated U type GI clamp , fastener , EI conduit , necessary nos. of jun nuts etc as required including S&F 3 Core 1.5 sq.mm round cable industrial CU. wire(Gloster / Finolex[Gold]) make required length and making connection complete as per Crompton make Cat no. (NS)

ECO-I IGP161LT8-16 1 X T8 with Aluminium T8 tube LTT8-20 [NS] ( should be use 3 core 1.5 sq,mm Industrial round cable)

ECO-I IGP162LT8-16 2 X T8 with Aluminium T8 tube LTT8-20 - 2 nos [NS] ( should be use 3 core 1.5 sq,mm Industrial round cable)

Supplying & fixing EPC Electrical PVT , Kolkata make 300 mm / 12`` sweep heavy duty ISI make exhaust fan 1420 RPM 230V 82 Watt in the existing hole with the help of nut bolts fixing with anti rotating system after cutting wall & mending good damages & finish.

Fixing only exhaust fan by anty rotating facility system nut bolts after grouting in wall also after making hole in wall and mending good damages and smooth cement finish as practicable as possible and providing necy. Length of PVC insulated wire and making connection for exhaust fan of following diameter.

For 30 cm / 12`` Exhaust fan [C-4 /28.b]

Supplying & laying following of PVC rigid conduit FR Precission make medium without saddle elbows in the existing under ground trench etc as required .(NS) (Used for 3 Core flat Cable drawing through Rigid Conduit along Under Ground Trench ) (NS)

20 mm dia

25 mm dia

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall / fixed in wall with fabricated Iron frame incl. painting , after cutting the wall & mending good damages to original finish including inter connection with suitable size of copper wire and neutral link & provision of earthing attachment .

2+6 Way [ Make - Siemens] ( Enclosure 8GB32102RC08) [ 13 / D- 10 ]

2+12 Way [ Make - Siemens] ( Enclosure 8GB32102RC14) [ 13 / D- 10 ]

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection fixed in wall in concealed / on iron frame made with 25x6 mm MS flat with painting in wall after cutting wall & mending good damages to original finish including inter connection with suitable size of copper wire and neutral link & provision for earthing attachment . as per GS ( Make - Siemens )

4 Way [Make Sciemns] ( Enclosure 8GB32202RC04 ) [ D- 10 / 14 ]

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection as per GS [ Make - Siemens]

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionas complete. [ Make - Siemens ]

Siemens make 6-32 A SP as per instruction of EIC [ D-6 / 7 ]

Connecting the equipments to eart busbar including S & F GI Hot Dip wire of size as below on wall / floor with staples buried inside wall / floor as required and making connection to equipments with bolts , nuts , washers lugs etc.

No. 6 SWG Hot Dip GI wire (Doble run)

Supplying & Fixing Spike earthing by the 25 mm dia 6 ' long GI solid earth electrode (as per sample provided) including GI nut bolts complete. (NS) (For pole & as required)

Supplying and Drawing 1.1 KV single core multistrand FRLSH / FR PVC insulated & unsheathed single core stranded copper wire Gloster / Polycab / Finolex(Gold) make in the following sizes prelaid polythene pipe as per GS.

3 x 22 / 0.3 (1.5 sqmm) (E-9/1.b)

2 x 36 / 0.3 (2.5 sqmm)+1 x 22 / 0.3 (1.5 sqmm) as ECC (E-9/1.s)

2 x 56 / 0.3 (4 sqmm) + 1 x 36 / 0.3 (2.5 sqmm) as ECC (E-9/1.v)

4 x 84 / 0.3 (6sq.mm) + 2 x 56 / 0.3 (4 sqmm) (E-9/1.y)

2 x 56 / 0.3 (4 sqmm) ( Use for running earth from main panel to Busbar Busbar to TPN Dbs) (E-9/1.g)

Earthing with 50mm dia perforated GI Pipe 3.64 mm thick x 3.04 mts long and 13 mm dia x 80mm long GI bolts,double nuts, double washers with funnel / reducer including necessary all materials complete earth pipe driven to an average depth of 3.65 mts. below the ground level & restoring surface duly rammed by for the following (G-1/2.a)

By ISI - Medium 50 mm dia GI Pipe of (Bonsal / Jindal / Neijon make. Heavy type

Supplying & fixing earth busbar of galvanized Hot Dip MS flat 25mm x 6 mm on wall having working clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts , nuts , washers , spaceing insulators etc as required as per GS (G-2/4.a)

Connecting the equipments body to earth busbar including S&F 25 mm x 6 mm galvanised Hot Dip MS flat on wall / floor with GI Saddles / floor cutting / existing `L` hook as required and connecting to the equipments including drilled holes with bolts , nuts , washers etc. complete including mending good damages to finish as per GS (G-3/5.d)

Supplying & fixing medium gauge GI pipe (ISI medium Zindal / Bonsal / Neijon make ) protection with necessary fittings and jointing materials as required . NB- Should be use Plumbing Pipe

32 mm dia

40 mm dia (F6 / 11,d)

50 mm dia (F6 / 11,f)

Laying of cable as below , after cutting floor / pavement / wall / tiels and making holes including embdding the cable at an average depth as below and mending good the damages to original finish by CC morter 5:1 ratio including removing the rubbish .

From 2.5 sq.mm to 35 sq.mm at an average depth of 100 mm in floor/pavement/wall etc

Laying of cable from 3 / 3.5 / 4 core 25 sq.mm on wall / surface including S & F double screw system heavy type GI saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) wire making holes etc as necy. & mending good damages to original finish and painting..(F-1/2.b)

Laying of cable from 3.5 / 4 core 35 sq.mm to 50 sq.mm on wall / surface including S & F double screw system heavy type GI saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) wire making holes etc as necy. & mending good damages to original finish and painting (F-2/.c)

Laying of one no. cable / more than one no. (2/3 nos. Cable) upto 35 Sq.mm in underground trench 460 mm wide x 760 mm average depth with brick protection on the top of the cable with 8 (eight) nos. bricks per mtr. including filling the space between the bricks and cable and also the trench with shifted soil leveling up and restoring surface duly rammed (F-2/1.b). NB - More than one no. or 2/3 nos cable may laid in the same underground trench in layir wise / as per instruction of EIC .

Fabricated & fixing the exhaust fan net guard 14 - 15 inch dia made with 19x5mm MS flat round shaped (Used as exhaust fan Louver) with 4 nos leg 50 - 75mm long and at middle (Hollow portion)) portion should be fixed / filled up by welding inclindly 19 x 5 mm MS stip at 12 mm interval with required nos.of stip and the legs should be fitted by grouting & CC morter in wall & including mending good damages & finish.(NS)

Supplying & Fixing GI / MS 50 x 50 x 6 mm x 1500 mm long equal angle whose one end should be splitted and other end should be 2 nos. drilled holes complete that should be fixed on ground ( splitted end) after excavation of earth / making hole in the ground 1/3 of angle length and filling the space with hard jhama metal & CC morter for fixing the loop box including S&F 9 mm dia 50 mm long GI nut bolts - 2 nos with double washer complete .

Supplying & fixing MS equal angle 2nos. 50x50x6mm size as per required length (H shaped) whose one end splitted for antirotating and that splited ends fixed at wall after grouting the wall and filling the space by sand cement , stone chips morter for making arrangement of street light fixing system including S&F all materials as required including drilled holes complete and also S&F GI nut bolts 3.5/8``x2`` / as required and GI heavy type washers , paiting etc. complete for making street light set fixing / as per instruction of EIC .

Supplying & fixing fabricated PCC Pole clamp 2 part type ( U &U shaped) as per size of PCC Pole / as per instruction of EIC made with the 35x6 mm GI / MS Flat by heating furnace with black painting for holding 32 mm & 40 mm dia GI pipe with the PCC pole with suitable bend also including drilled holes complete of the Pole clamp sets & also including S & F MS / GI nut bolts 10 mm dia x 32 - 50 mm long with washers NB- Fabricated MS / GI 2 part type Clamp set / Pole clam (U & I / U & U shaped ) should be approved by the EIC before execution of Job for holding the 32 mm & 40 mm dia GI pipe with the PCC pole.

S&F 240 V 2Nos 6 A Plug Socket with separate 2 Nos 6A Piano key type switch flush type & indicator (Anchor make) on Sheet metal switch board embedded in wall incl S & F 175 x100 x 65 mm on MS CRC (16 SWG) switch board with bakelite top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite cover and making necy. connections as reqd. as to GS ( NS)

Supplying & drawing 3 Core 1.5 / 2.5 / 4.0 Sq.mm multi core PVC insulated , PVC sheathed industrial cable Round / Flat type as per instruction of EIC with flexiable bright annealed copper conductor for voltage grade upto 1100V Gloster / FINOLEX make in the inside of pole including making connection complete also tapping as per instruction of EIC .

3 Core 1.5 sq.mm (30/0.25 )

3 core 2.5 sq.mm ( 50/0.25 )

3 Core 4.0 sq.mm ( 56/0.30 )

During execution of under ground cable laying job , the existing tar road boaring is needed in different places with the help of GI pipe & necessary tools & tackles as per requirement

Dismantling the existing working / non working electrical accessories during execution of job like electrical wiring , Main switch , cables , OH line etc as per requirement of Job for fixing the new accessories and making connection complete.

Supplying & fixing ceiling fan hook ` U` shaped (both side 5-6 inch long resting arm & down 4 inch )and made with the 12 mm dia TMT Bar during custing work of building construction .

Add GST 18%

Add Labour Cess 1%