Repairing, Maintenance and Extension of Drainage/Storm Drainage line including construction of Drainage/Storm Machineholes, Storm inlet chambers where required in various areas of T.P.S. No. 3(Karanj), T.P.S. No. 8(Umarwada), T.P.S. No. 34(Magob-dumbhal), T.P.S. No. 53(Magob-dumbhal)& different areas in East(Varachha) Zone-A

NAME OF WORK :-Repairing, Maintenance and Extension of Drainage/Storm Drainage line including construction of Drainage/Storm

Machineholes, Storm inlet chambers where required in various areas of T.P.S. No. 3(Karanj), T.P.S. No. 8(Umarwada), T.P.S. No. 34(Magob-

dumbhal), T.P.S. No. 53(Magob-dumbhal)& different areas in East(Varachha) Zone-A, Surat.

Estimated Amount Rs.:-

SR. ITEMS QTY. RATE (Without PER AMOUNT

Providing cutting of existing bituminous surface up to suitable

depth in line and alignment using Mechanically operated cutter

machine before excavating existing surface for utility laying including

cost of all type of machinery, fuel, labour etc. and as per direction of

engineer in charge.

Excavation for pipe line trenches for water supply, sewerage line,

machine hole etc. all with shoring and strutting if required as per

required gradient and line including safety provisions using site

rails and stacking excavated stuff including up to all required

lead cleaning the site etc. complete for all lifts and strata as

In hard Murrum, boulders incl. macadam road. 300.00 155.25 C.M.

Excavation in bituminous road as per required gradient and line

including safety provisions using site rails and stacking excavated

stuff including up to all required lead cleaning the site etc. complete 200.00 288.65 C.M.

for all lifts and strata as specified..

Excavation in Bituminous road

Demolition/Dismentalling RCC work or masonry work or removing

of paver block flooring in any part

including stacking of serviceable/useful material and

disposal of unserviceable material with all lead and lift.

(A) Brick masonry work/Paver block 100.00 550.40 C.M.

(B) Unreinforced c.c. 50.00 609.26 C.M.

(C) RCC work 70.00 1057.85 C.M.

Excavation for pipe line trenches for water supply, sewerage line,

machine hole etc. all with shoring and strutting if required as per

required gradient and line including safety provisions using site

rails and stacking excavated stuff including up to all required

lead cleaning the site etc. complete for all lifts and strata as

specified. In all sorts of

soil and soft murrum.

(A) Upto 1.5 Mt. dpt.from G.L. 2000.00 102.35 C.M.

(C) 3.0 Mt TO 4.50 Mt depth 210.00 118.45 C.M.

(E) 6.0 Mt TO 7.50 Mt depth 40.00 129.95 C.M.

F) For every extra additional depth of 1.5 mt. or part there of 32.20 C.M.

beyond 7.5 mt. depth

Providing maintaining up to the required period safe guarding

lightening the excavated trenches with proper barricading, fencing

with timer balles, bamboos, G.I. sheets, red flag and red lights along

with the provision of the chowkidars as directed by Engineer-in-

Removing of existing pipeline incl. removal of specials, valves

jointing material including carting and stacking of removed

material for site of work to the department store as directed excl.

excavation and refilling.

Supplying & Filling with fine sand in compacted thickness over the

base including watering ramming, consolidating & dressing etc.

complete. Item includes by using vibratory plates compacted 10.00 329.00 C.M.

machine and as directed by engineer in

Providing and supplying ISI Standard R.C.C. pipes in standard

lengths of following class and diameter suitable for rubber ring

joints including all taxes, insurance, transportation, freight

charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. One rubber ring

should be supplied with each full length socketed pipe, cost

included in rates below. Lowering, laying and jointing R. C.C. pipes in

C. M. 1:1 1/2 of following diameters in proper position, grade and

alignment at all levels as directed by Engineer-in-charge including

conveyance from stores to site of work, labour, giving

hydraulic testing as per ISI code.

(D1) 250 mm dia (NP3 Class) 500.00 638.55 Rmt.

(D2) 250 mm dia (NP4 Class) 0.00 868.55 Rmt.

(E1) 300 mm dia (NP3 Class) 300.00 891.85 Rmt.

(E2) 300 mm dia (NP4 Class) 0.00 1223.85 Rmt.

(H1) 450 mm dia (NP3 Class) 300.00 1557.65 Rmt.

(H2) 450 mm dia (NP4 Class) 0.00 2375.65 Rmt.

(J1) 600 mm dia (NP3 Class) 20.00 2208.20 Rmt.

(J2) 600 mm dia (NP4 Class) 0.00 3256.20 Rmt.

(M1) 900 mm dia (NP3 Class) 50.00 3992.00 Rmt.

(M1) 900 mm dia (NP4 Class) 0.00 7029.00 Rmt.

(N1) 1000 mm dia (NP3 Class) 0.00 5252.25 Rmt.

(N2) 1000 mm dia (NP4 Class) 0.00 8713.25 Rmt.

(P1) 1200 mm dia (NP3 Class) 10.00 6405.00 Rmt.

(P2) 1200 mm dia (NP4 Class) 0.00 10210.00 Rmt.

(Q1) 1400 mm dia (NP3 Class) 0.00 8178.10 Rmt.

(Q2) 1400 mm dia (NP4 Class) 0.00 14801.10 Rmt.

(R1) 1600 mm dia (NP3 Class) 5.00 11830.55 Rmt.

(R2) 1600 mm dia (NP4 Class) 0.00 18365.55 Rmt.

(S1) 1800 mm dia (NP3 Class) 5.00 14355.50 Rmt.

(S2) 1800 mm dia (NP4 Class) 0.00 20002.50 Rmt.

(L1) 2000 mm dia (NP3 Class) 0.00 16880.45 Rmt.

(L2) 2000 mm dia (NP4 Class) 0.00 21718.45 Rmt.

(N1) 2200 mm dia (NP3 Class) 0.00 19405.40 Rmt.

(N2) 2200 mm dia (NP4 Class) 0.00 23434.10 Rmt.

1190.00 Total Length

Providing and constructing Sewer machine holes, scraper machine

holes and unit house connection chamber, as per the type design in

brick masonry in C. M. 1:5 and inside and outside 20mm thick

plastering in C.M. 1:3 necessary 100 mm coping with

reinforcement in R.C.C.M.200 fixing C. I. steps and fixing

machine hole frame and covers (But excluding supply of

machine hole frame and covers) over machine holes and house

connection chambers and fixing machine hole covers (but

excluding supplying of machine hole covers) over scraper

machine hole etc. complete, providing and fixing safety chain

wherever necessary as per the stipulations in the type design

complete as per latest

CPHEEO manual.(excl. excavation).

(A) TYPE-A : 1200 mm DIA

(Add or Deduct Rs.662.8 per 0.10 mt. Depth increase or

(B) TYPE- B : 1500 mm DIA

(Add or Deduct Rs.1231.30 per 0.10 mt. Depth increase or

(C) machinehole Type "C" circular type having inside diameter

of mimimum 1500 mm and for depth beyond 4.0 m to 6.0 m depth (for

150 mm to 1800 mm dia sewers)

1 machinehole Type "C" as above but up to 4.0 m. depth 0.00 52908.00 No.

2. Extra depth beyond 4.0 m and up to 6.0 m depth for type 18786.00 Rmt.

"C" machinehole above

(D) machinehole Type "D" circular type having inside diameter

of mimimum 1500 mm and for depth beyond 6.0 m to 10.0 m depth

(for 150 mm to 500 mm dia sewers)

1 machinehole Type "D1" as above but up to 6.0 m. depth 0.00 91174.00 No.

2. Extra depth beyond 6.0 m and up to 10.0 m depth for 22110.00 Rmt.

type "D1" machinehole above

(E) machinehole Type "D2" circular type having inside diameter

of mimimum 1500 mm and for depth beyond 6.0 m to 10.0 m depth

(for 600 mm to 1000 mm dia sewer)

1 machinehole Type "D2" as above but up to 6.0 m. depth 0.00 89818.00 No.

2. Extra depth beyond 6.0 m and up to 10.0 m depth for 22121.00 Rmt.

type "D2" machinehole above

(F) machinehole Type "D3" circular type having inside diameter

of mimimum 1900 mm and for depth beyond 6.0 m to 10.0 m depth

(for 1100 mm to 1800 mm dia sewer)

1 machinehole Type "D3" as above but up to 6.0 m. depth 0.00 109142.00 No.

2. Extra depth beyond 6.0 m and up to 10.0 m depth for 26015.00 Rmt.

type "D3" machinehole above

(G) Scraper machinehole Type "S1" rectangular type having inside

dimention 1500 mm x 1500 mm for 600 mm dia to 1200 mm dia

sewer pipe and for depth 2.5 m to 9.0 m

1 Scraper machinehole Type "S1" as above but up to 2.5 m. 0.00 52319.00 No.

2. Extra depth beyond 2.5 m and up to 9.0 m depth for type 31907.00 Rmt.

"S1" scraper machinehole above

(H) Scraper machinehole Type "S2" rectangular type having inside

dimention 1900 mm x 1900 mm for 1400 mm dia

sewer pipes and for depth 2.5 m to 9.0 m

1 Scraper machinehole Type "S2" as above but up to 2.5 m. 0.00 48103.00 No.

2. Extra depth beyond 2.5 m and up to 9.0 m depth for type 20370.00 Rmt.

"S2" scraper machinehole above

Providing & construction brick work using Fly Ash bricks having 20.00 4237.00 C.M.

crushing strength not less than 35 Kg./sq.cm. in foundation &

plinth in C.M. 1:6 (1cement:6 sand ) etc.

comp. Foundation and plinth.

Providing 15 mm thick plaster in C.M. 1:3 in single coat for plastering

for all heights for brick masonry surface and all RCC surface and

finished even and smooth with floating coat of neat cement 350.00 237.51 S.M.

slurry as directed by Engineer in

Providing and laying cement concrete 1:1.5:3 (1 cement: 1.5 sand:3

graded stone agg. 20 mm nominal size) & curing comp.

lnclud.cost of form work but exclu. Cost of reinforcement

for reinforced concrete work in : (A) Foundation, footing, Base

of columns and Mass concrete.

Raising & Lowering Eixsiting Machine holes (with frames) of drainage,

storm drainage, sewer trap chamber, scraper machine hole

frame & cover any utility services up to newly carpeted/recarpeted

road surface including both of plain cement concrete ordinary

grade 1:1.5:3.(1 Part of cement : 1.5 Part of sand : 3 part of course

aggregate) The inside & outside surface of chamber shall be

plastered in cement mortar 1:3 (1 part of Cement and 3 part of 35.00 583.55 No.

sand) include lobour required to carry out the work. and cleaning

the bitumen on the top surface & removing road material from

machine hole etc. complete.

Making connection with the machinehole by boring hole on the

masonry of machinehole and jointing pipe with cement mortar in

prop. 1:2 inside as well as outside of existing machinehole carting 40.00 267.86 No.

etc. complete as directed by Engineer-

in-charge. for Drainage line.

Making connection with the machinehole

For Storm Drainage

3) more than 1600 mm 0.00 2700.00 No.

Dewatering by pumping set of required capacity including

temporary platform carting pumping at site and fixing the same

in position including all accessories, and fuel and

labour etc. complete.

Pump set of Capacity 1000.00 18.32 HP/Hr

Providing R.C.C. precast machinehole frame with cover as per

type design for circular machinehole and scraper

machinehole etc. complete.

(A) For House Connection Chamber 10.00 1733.00 No.

(B) For Circular machinehole (Heavy Duty) 100.00 2294.00 No.

(C) For Scraper machinehole. 15.00 7289.00 No.

Providing and filling Rubble including hand packing and filling 30.00 1064.80 C.M.

interstices with quarry spalls behind abutment and

between returns as directed.

Refilling the pipeline trenches incl. ramming, watering, 3510.00 25.30 C.M.

consolidating disposal of surplus stuff as directed within a

radius of 3 km.

Work of Temporary diversion of sewage by plugging the manholes

at upstream and downstream of the sewer stretches proposed

to be replaced. The rubber plug required for the plugging the

drainage line shall be procured by the contractor and the same

shall be the property of

150mm-400mm sewer line 5.00 20089.29 Nos.

450mm-600mm sewer line 3.00 20982.14 Nos.

700mm-1200mm sewer line 0.00 23660.71 Nos.

Providing & construction simple chamber of 23 cm. th' B.B. Masonary

in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3 inside & outside

to exposed faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand

: 4 Grade stone aggregate 20mm size) ,Foundation concrete

1:5:10 & fixing Precast RCC heavy duty Cover with frame On top etc. 10.00 2681.76 No.

comp. Inside dimension,455 x 610 mm &450 mm deep for single pipe.

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 242.39 Each

Providing and supplying in standard length ISI mark rigid

unplasticized PVC pipes suitable for potable water with ring fit joint

including cost of rings, as per IS specification no.4985/1988

including all local and central taxes, transportation, freight

charges, octroi, inspection charges, loading, unloading, conveyance

to the departmental stores and including cost of jointing material

etc. complete. 6 kg/cm2 Lowering, laying, fixing and

jointing PVC/uPVC/CPVC pipes and specials of following class and

diameter including cost of conveyance from stores to site of works

including cost of labour, material, cement solvent, giving

satisfactory hydraulic testing as per ISI code.

(C)140 mm dia 0.00 352.45 Rmt.

Providing & laying in trenches galvanised mild steel

tubes(medium grade) TATA / ZENITH / ASIAN /JINDAL MAKE of the

following nominal bore & tube fittings etc. comp..-

(B) 40 mm dia 5.00 425.33 Rmt.

(C) 65 mm dia 0.00 723.83 Rmt.

Providing, Laying and jointing on true line and level UPVC pipe

(SCH40) line of

Prince/Supreme/Jain/Astral/Tulsi/Finolex make including fittings

make or equivalent as approved by engineer-in- charge. Pipe shall

be fixed on the wall the help of clamp at every two meter C/C or

shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Carting and Recarting of excavated earth from any site to

required place as per requirement and directed by

engineer in charge.

Providing interlocking type Rubber moulded cement concrete

paver block of approved shape, design & colour having 60mm

thickness (M-35) purchased from SMC's approved paver block

manufacturer only & fixing of fine sand bedding. Item includes

levelling by using vibratory plates compacted machine. Item also 30.00 524.00 S.M.

includes all materials, labour, equipments, tools, plants, watering,

cleaning etc. complete. (Without colour).

Removing & Refixing interlocking type cement concrete paver

block (Rubber moulded) of approved shape, design & colour fixing on

fine sand bedding. Item includes levelling by using vibratory plates

compacted machine. Item also includes all materials, labour, 50.00 102.00 S.M.

equipments, tools, plants, watering, cleaning etc. complete. (M.R)

Provision of Traffic cones for limited period at suitable locations

as per requirement during the construction in construction zone

comprising of warning zone, approach transition zone, working 30.00 501.00 NOS.

zone and terminal transition zone

Trecing of old machinehole All type 35.00 1202.00 NOS.

Providing & Constructing manhole-

machinehole as per type &design with necessary excavation, p.c.c. in

1:4:8, benching in 1:2:4 , brick masonary in C.M. 1:4, 12 mm th. i

nside plaster in C.M. 1:3, Prov. & fixing r.c.c. mh. frame & cover in

c.c. 1:2:4, & 150 mm th.R.C.C. slab in 1:1.5:3 including Prov. fixing

polypropelene Steps etc.comp.

"A" TYPE manhole-machinehole

Sewer size : up to 600 mm dia. , Chamber Size :

Shallow manhole-machinehole depth up to 2.5 mt.

Rate For 2.5 mt Depth

Add. or ded. per every 10 cm increase or decrease in depth

"B1" TYPE manhole-machinehole

Sewer size : up to 1000 mm dia. , Chamber Size :

Shallow manhole-machinehole depth up to 2.5 mt.

Rate For 2.5 mt Depth

Add. or ded. per every 10 cm increase or decrease in depth

"B2" TYPE manhole-machinehole

Sewer size : up to 1000 mm dia., Chamber Size : 1500 mm x 1000 mm

Deep manhole-machinehole with access shaft depth 2.5 mt to 4.0 mt

Access Shaft Size : 850 mm x 850 mm 0.00 45914.00 NOS.

Rate For 4.0 mt Depth

Add. or ded. per every 10 cm increase or decrease in depth

"B3" TYPE manhole-machinehole

Sewer size : up to 1000 mm dia., Chamber Size :

Deep manhole-machinehole with access shaft depth 4.0 mt to 6.0 mt 0.00 77690.00 NOS.

Access Shaft Size : 850 mm x 850 mm

Rate For 6.0 mt Depth

Add. or ded. per every 10 cm increase or decrease in depth

"C1" TYPE manhole-machinehole

Sewer size : 1100mm to 1400 mm dia. , Chamber

Shallow manhole-machinehole depth up to 2.5 mt.

Rate For 2.5 mt Depth

Add. or ded. per every 10 cm increase or decrease in depth

"C2" TYPE manhole-machinehole

Sewer size : 1100mm to 1400 mm dia., Chamber Size :

Deep manhole-machinehole with access shaft depth 2.5 mt to 4.0 mt 0.00 63202.00 NOS.

Access Shaft Size : 850 mm x 850 mm

Rate For 4.0 mt Depth

Add. or ded. per every 10 cm increase or decrease in depth

"C3" TYPE manhole-machinehole

Sewer size : 1100 mm to 1400 mm dia. , Chamber Size :

Deep manhole-machinehole with access shaft depth 4.0 mt to 6.0 mt. 0.00 97792.00 NOS.

Access Shaft Size : 850 mm x 850 mm

Rate For 6.0 mt Depth

Add. or ded. per every 10 cm increase or decrease in depth

"D1" TYPE manhole

Sewer size : 1600 mm to 1800 mm dia. , Chamber Size :

Shallow manhole-machinehole depth up to 2.5 mt.

Rate For 2.5 mt Depth

Add. or ded. per every 10 cm increase or decrease in depth

"D2" TYPE manhole-machinehole

Sewer size : 1600 mm to 1800 mm dia., Chamber Size : 2400 mm x

Deep manhole-machinehole with access shaft depth 2.5 mt to 4.0 mt 0.00 61679.00 NOS.

Access Shaft Size : 850 mm x 850 mm

Rate For 4.0 mt Depth

Add. or ded. per every 10 cm increase or decrease in depth

"D3" TYPE manhole-machinehole

Sewer size : 1600 mm to 1800 mm dia. , Chamber Size :

Deep manhole-machinehole with access shaft depth 4.0 mt to 6.0 mt. 0.00 97505.00 NOS.

Access Shaft Size : 850 mm x 850 mm

Rate For 6.0 mt Depth

Add. or ded. per every 10 cm increase or decrease in depth

"E" TYPE manhole-machinehole

Sewer size : 2000 mm to 2200 mm dia., Chamber Size :

Deep manhole-machinehole with access shaft depth 4.5 mt to 6.0 mt. 0.00 141200.00 NOS.

Access Shaft Size : 850 mm x 850 mm

Rate For 6.0 mt Depth

Add. or ded. per every 10 cm increase or decrease in depth

Repairing of Sewer/Storm drainage machinehole shaft size 850mm

x 850mm) on existing Sewer/Storm drainage lines including

excavation up to 0.75 mt. depth, Dismentaling of damaged

machinehole up to required depth(i.e frame cover, coping, brick

masonry etc.) and reconstruction of the same up to 0.75 mt. depth in

Brick Masonry 23 cm thick in C:M 1:4, Plaster 15 mm thick C:M 1:3

inside and out side, Coping in C:C 1:2:4 and conveying, carting

& fixing of C.I/R.C.C machinehole frame cover (to be issued from 80.00 3857.00 NOS.

any of the Municipal Store), Refilling , Curing of repaired

machinehole work shall be carried up to 10 days from the repairing

an arrangement for to be done by contractor for protection of

repaired work against traffic etc. complete. (Add / Deduct Rs. 342/-

per 0.10mt. Depth Increase or Decrease.)

Repairing of Sewer/Storm drainage machinehole shaft size 1200mm

x 1200mm) on existing Sewer/Storm drainage lines including

excavation up to 0.75 mt. depth, Dismentaling of damaged

machinehole up to required depth(i.e frame cover,coping,brick

masonry etc.)and reconstruction of the same up to 0.75 mt.

depth in Brick Masonry 23 cm thick in C:M 1:4,Plaster 15 mm

thick C:M 1:3 inside and out side , Coping in C:C 1:2:4 and conveying,

carting & fixing of C.I/R.C.C machinehole frame cover( to be issued 35.00 4981.00 NOS.

from any of the Municipal Store), Refilling , Curing of repaired

machinehole work shall be carried up to 10 days from the

repairing an arrangement for to be done by contractor for

protection of repaired work against traffic etc. complete.

Add / Deduct Rs. 428.80/- per 0.10mt. Depth Increase or

Providing constructing brick masonary INLET CHAMBER OF

750*600*1500 mm internal dimension with necessary

excavation refilling 350 mm th Br. masonary in C.M 1:4,150 mm th.

p.c.c. & benching in c.c. 1:2:4,12mm th. plaster in

C.M. 1:3 for inside & cement pointing in C.M. 1:3 for o/s, prov.

& fixing precast RCC frame & cover of M30 grade as per drawing &

specification.- Rate For 1.5 mt Depth

Add. or ded. per every 10 cm increase or decrease in depth

Repairing of strom drainage Inlet chamber size 600mmx750mm) on

existing strom drainage lines including excavation up to 0.75 mt.

depth,Dismentailing of damaged inlet chember up to required

depth (i.e. frame cover, coping, brick masonry ect) and

reconstruction of the same up to 0.75 mt. depth in brick masonry

cm thick in C:M: 1:4, Plaster 12mm thick C:M inside, coping in C:C 1:2:4

and conveying, carting & fixing of C.I/R.C.C. Precast inlet frame cover

(to be issued from any of the Municipal Store) Refilling,

curing of repaired inlet Chamber work shall be carried up to 10 25.00 5773.00 No

days from the repairing an arrangement for to be done by

contractor for protection of repaired work against traffic ect.

(Add / Deduct Rs. 552/- per 0.10mt. Depth Increase or Decrease.)

Providing and Fixing RCC precast inlet chamber cover of M-

30 Grade as per drawing and specification.

A Size-750 mm x 600 mm 125.00 1567.00 No

B Size-600 mm x 450 mm 10.00 692.00 No

Providing and Fixing RCC precast inlet chamber frame of M-

30 Grade as per drawing and specification.

A Size-750 mm x 600 mm 125.00 1268.00 No

B Size-600 mm x 450 mm 10.00 647.00 No

TOTAL AMOUNT Rs.

TOTAL AMOUNT Rs.