Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.3 LAccepted-AOC KULANGARA HOUSE NIRMALAKKUNNU V K THENHIPALAM MALAPPURAM 676109 | THENHIPALAM | MALAPPURAM | KERALA | 676109 | L1 | Accepted-AOC L1 | |
| 2 | L2₹18.2 L+₹87,829.96 (5.08%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹18.8 L+₹1.5 L (8.72%)Rejected-AOC | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | LIPIN M V L3 | SIBIN KULANGARA L1 | ARUN.N L2 |
|---|---|---|---|---|---|---|
| 1.00CIVIL WORKS | ||||||
| 1.00 | 15.28.2:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos cement Sheet | 475.68 | sqm | 65 ₹30,919.2 | 60 ₹28,540.8 Lowest | 62.77 ₹29,858.43 |
| 1.00 | 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared | 735 | sqm | 14.8 ₹10,878 | 13 ₹9,555 Lowest | 14.28 ₹10,495.8 |
| 1.00 | 15.17.2:Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:Channels, angles, tees and flats | 1,027.2 | kg | 1.94 ₹1,992.77 | 1.7 ₹1,746.24 Lowest | 1.87 ₹1,920.86 |
| 1.00 | OD338825/2025-2026:Providing and fixing 150mm UPVC square gutter pipe over GI clamp of same profile @1mc/c | 103.6 | metre | 296 ₹30,665.6 | 273 ₹28,282.8 | 239.29 ₹24,790.44 Lowest |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 932.23 | kg | 200 ₹1,86,445 | 173 ₹1,61,274.93 | 168 ₹1,56,613.8 Lowest |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 954.55 | kg | 152 ₹1,45,091.6 | 140 ₹1,33,637 Lowest | 146.83 ₹1,40,156.58 |
| 1.01 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 655.68 | sqm | 720 ₹4,72,089.6 | 632 ₹4,14,389.76 Lowest | 661.06 ₹4,33,443.82 |
| 1.01 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | 67 | metre | 461 ₹30,887 | 424 ₹28,408 Lowest | 443.54 ₹29,717.18 |
| 1.01 | 12.7.2:Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gm/ m2 | 8 | metre | 770 ₹6,160 | 708 ₹5,664 Lowest | 740.68 ₹5,925.44 |
Tender Value
₹21.2 L
EMD Value
₹50,000
Closing Date
1 Jul 2026, 3:00 pmClosed
EXECUTIVE ENGINEER
EXECUTIVE ENGINEER, WD BUILDINGS DIVISION MALAPPURAM, 676 505
This Building is a Column framed structure with Asbestos cement sheet roofing with pvc ceiling . This roof is damaged at many portions and leaks are appeared in the innerside of the building . Ceiling is also falling down
2026_PWD_857079_1
BL/DN/MPM/06/2026-27
Open Tender
Civil Works - Buildings
Item Rate
DIET BP ANGADI
Please refer Tender documents.
8 documents required · 8 mandatory
₹2,760
Yes
₹50,000
Yes
4 Aug 2026
22 Jun 2026
3 Jul 2026
22 Jun 2026
1 Jul 2026
22 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1CIVIL WORKS | |||||
| 1.001 | 15.28.2:Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Asbestos cement Sheet | - | sqm | - | - |
| 1.002 | 2.31:Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared | - | sqm | - | - |
| 1.003 | 15.17.2:Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:Channels, angles, tees and flats | - | kg | - | - |
| 1.004 | OD338825/2025-2026:Providing and fixing 150mm UPVC square gutter pipe over GI clamp of same profile @1mc/c | 1 | metre | - | - |
| 1.005 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | - | kg | - | - |
| 1.006 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1 | kg | - | - |
| 1.007 | 12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 1 | sqm | - | - |
| 1.008 | 12.51.1:Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600 mm) | - | metre | - | - |
| 1.009 | 12.7.2:Providing and fixing 15cm wide, 45 cm overall semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.63 mm thick with zinc coating not less than 275 gm/ m2 | - | metre | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1448739.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.06 MB
BOQ_1448739.xls
BOQ • 0.31 MB
SBDDIETBP.pdf
Tender Documents • 2.62 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .