Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹69,990accepted-aoc | accepted-aoc |
Tender Value
₹72,006.97
EMD Value
₹20,000
Closing Date
24 Dec 2025, 9:30 pmClosed
Directorate of Municipal Administration
S C HUNASIMARAD
annual tender for maintenance Of 2 to 7.5 hp Borewell Motor Winding& Pump Repaire In ward No 08 to 14 gadag betageri cmc limits
DMA/2025-26/SE6023
DMA/2025-26/SE6023
Open
Two Tender Document System(Two Cover)
DMA City Municipal Council Gadaga
7 documents required · 7 mandatory
satifactoriy completed at least 50% as prime contractor at least one such similar work repair of Submersible Motor and pump on annual tender basis of valuve not less than rs 4.00 lakh (50% of estimated cost of tender
Pwd registration certificate class-3 &above
valid GST Registartion Certificate and Valid Pan card
line of vedit i.e 30 %of amount put to tender abtained from nationalized scheduled banks in given pro forma in the bid documnets liquid assets and or availibility of cedit facilites of not less tahn rs 2.40 lak
financial tunover certifiacte obtained and certified by the registerd valid chareterd accountant indicating the registration no of charted accountant with UDIN Nmber details along with prifit and loss astatments tallying annual turn over in the last five years 2020-21 to 2024-25 rs 8.00 lakh
Notory self attestation regarding agreed to terms and conditions as per bid docunets kw1 on face valuve of stamp paper
Notary affidavt declaration that the bidders has not been blacklisted
₹500
₹20,000
24 Dec 2025
16 Dec 2025
26 Dec 2025
23 Dec 2025
Supplying, fixing and wiring 0 to 100amps Direct Reading AC analog type Ammeter
Supply and Fixing at site wrought middle steel (galvanized) 15 mm dia GI bendFor 32 mm dia GI BEND
Supply and Fixing at site wrought middle steel (galvanized) 15 mm dia GI bend For 50 mm dia GI BEND
ProvidingFixing wrought mild steelgalvanized GI collar For 32 mm dia GI collar
Providing & Fixing wrought mild steel (galvanized) 15 mm dia GI collar For 50 mm dia GI collar
Supply and fixing of 25 Amps 4pole power contactor with NO/NC contacts on existing wood/panel board using necessary bolts, nuts, washers and wiring etc., complete with AC-3 Rating and as per IS-13947
Digging of trench In soil (ordinary) of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level and consolidating etc., complete
SupplyingfixingofPorcelainfuse32a
SupplyingfixingofPorcelainfuse63A
Labour charges for laying of 1.1 KV class UG cable in existing trench GI pipe / stoneware pipe / on wall / on pole as required
monoblocmotorrewinding10hp
monoblockmotorrewinding30hp
Rewinding of submergible pumpset upto 3hp
Rewinding of submergible pumpset upto 05hp
Rewinding of submergible pumpset upto 7 to 7.5 hp
Lifting of struck up submersible pump set
PVC insulated cable of Flat 3 core2.5 mm
PVC insulated cable of Flat 3 core1x3x 4 Sqmm
runningcapacitorupto45mfd
startingcapacitorupto200mfd
dolstarterupto5hp
Supplyingfixingmcb32sp
Replace the components of motor parts of The Carbon Housing (Thrust bearing block assembly complete with segment bearing pad.
Replace the components of motor parts of The Stud and Nuts
Replace the components of motor parts of The Gun Metal bearing, centrifugally cast Aluminium Bronze bearing brush
Replace the components of submergible pump sets Intermidiate piece(I.P) with I.P for leaded bronze bush
Replace the components of submergible pump sets The Oil Seal.and steel bush
Replace the components of submergible pump set The Guide Vane
Replace the components of submergible pump sets The Impeller (Shell moulded with aluminium and bronze.
Replace the components of motor parts of The lifting& re errection of pupmsets of submergible pumpset from well.
Reerrection charges of pumping machinery including overhouling and painting
PVCinsulated1100Vgradewire4mm
PVCinsulated1100Vgrade6mmaluminium
Supply and Fixing at site wrought middle steel (galvanized) GI hexagonal nipple For 32 mm dia GI hexagonal nipple
Supply and Fixing at site wrought middle steel (galvanized) GI hexagonal nipple For 40 mm dia GI hexagonal nipple
Supply and Fixing at site wrought middle steel (galvanized) GI hexagonal nipple For 50 mm dia GI hexagonal nipple
Supply, installing,testing and commissioning COMMON control panel consisting of the following as per bwssb sr specification
Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches as per bwssb sr
Supplying fixing single phase preventer using necessary wires over an existing panel board suitable for motor up to 20 HP capacities.
Supply and delivery at site Stringing of heavy duty Naylone/PP rope with ISI etc complete suitable for Single phase Pumpsets
Replacing Of 1.1 kV, XLPE or Heat resistant PVC insulated 6 Sqmm, 2 Core
Replacing Of 1.1 kV, XLPE or Heat resistant PVC insulated 10 Sqmm, 4 Core
Supply and Fixing at site wrought middle steel (galvanized) GI union For 32 mm dia GI Union
Supply and Fixing at site wrought middle steel (galvanized) GI union For 50 mm dia GI Union
Supplying, fixing and wiring 0 to 600Volts 96x96mm AC Voltmeter on existing panel/wood board
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
BOREWELL 6023 BID.docx
Tender Document • 2.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .