Re-organization and renovation of 11KV/440V, 250KVA sub-station installed near naya more to smooth feeding the power of GVTC, workshop, Area sales office, Area quality lab, Datma more colony etc of kuju Area.

Amount

11 KV O/H line circuit

Supply & Fixing of Drop out fuse

Supply & Fixing of Pad/Palm connector

Supply & Fixing of Bi-metalic connector

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing structure as required. Upto 120 sq. Mm

Supply & Fixing of Nut & Bolts

Supply & Fixing of GOAB 11KV grade,400Amp horizental type

Installation of Transformer 3.3KV/440Volt

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:70 sq. mm

Supplying and erection of 11 KV pin insulator complete with largesteel head G.I. pin, nuts, washers etc. as required.

Supplying and erection of 11 KV disc insulator for 11 KV overhead lines with galvanised insulator fittings, ball and socket typeand complete with galvanised strain clamps, bolts, nuts, washers etc. as required.

Erection of ACSR conductor of 7/3.35 mm to 7/4.00 diameter andabove including binding etc. as required.

Supplying and erection of three piece nonlinear resistor type lightning arrestor suitable for 3 wire, 11 KV overhead lines with rated voltage 9 KV (rms) with a nominal discharge current rating of 5 KA and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as required

Supplying and erection of bow stay set complete (galvanised)with 19/20 mm dia X 1.8 metres long stay rod, anchor plate ofsize 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle( 20 mm X 60 cm ), 7/ 4.00 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 40 mm nominal size ) foundationincluding excavation and refilling and also with 0.6 m long braceof size 50 mm X 50 mm X 6 mm angle iron with 50 mm dia pulleyfixed at one end of the brace as required.

Erection of pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) foundation including excavation and refilling etc. as required.Above 10.00 metre and upto 12.00 metre

Dismantling of pole/ street light standard/ strut embedded incement concrete foundation etc. as required.

Dismantling of over head lines comprising of copper/ aluminiumover head conductor, G.I. wire, cross arms, insulators etc. as required.

Supply & Fixing of copper cable single core flexible type 1100 voltage grade 16 sq mm

Supply & Fixing of Copper Tubular Lug 16 sq mm

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Foundation with shed and 440Volt OH line power supply

Brick work with common burnt clay modular bricks of class designation7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) 2 Mtr X 2 Mtr X 0.24 Mtr X 2 Side = 1.92 CUM 1.52 Mtr X 2 Mtr X 0.24 Mtr X 2 =1.45 CUM For earth pits 0.75 Mtr X 0.12 Mtr X 0.50 Mtr X 4 Side X 3 Nos=0.54 CUM

Providing and laying in position cement concrete of specified grade excludingthe cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) 2 Mtr X 2 Mtr X 0.24 Mtr = 0.96 CUM 2 Mtr X 0.24 Mtr X 0.12 Mtr X 4 =0.23 CUM For Shed 0.50 Mtr X 0.50 Mtr X 0.75 Mtr X 4 Nos=0.75 CUM

Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1cement : 3 coarse sand), finished with a floating coat of neat cement.18 mm thick

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m inwidth as well as 10 sqm on plan) including disposal of excavatedearth, lead upto 1.5 m, disposed earth to be levelledand neatly dressed. 2.8.1 Ordinary rock .

Providing corrugated G.S. sheet roofing including vertical / curved surfacefixed with polymer coated J or L hooks, bolts and nuts 8 mm diameterwith bitumen and G.I. limpet washers or with G.I. limpet washers filledwith white lead, including a coat of approved steel primer and two coatsof approved paint on overlapping of sheets complete (up to any pitch inhorizontal/ vertical or curved surfaces), excluding the cost of purlins, raftersand trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/ m²

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.

Febrication and errection work of iron and steel platform, column, bracing housting. Placing etc.

Total impact of GST for the purpose of CTC

M.k. Traders

Sandeep and Co.