Repairs works to Officers Hostel Building in Walmi Campus RTC Surat.

Repairs work to Officers Hostel building in Walmi Campus RTC Surat

BILL OF QUANTITIES

Percentage Rate Tender

Item No Description of Item Quantity Unit Amount

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful materials

and disposing off the excavated stuff upto 50 Meter

lead.(A) Loose or soft soil

Filling in foundation and plinth with murrum or

2 selected soil in layers of 20cm. thickness including 12.00 Cu.m 301.78

watering, ramming and consolidating etc. complete.

Supplying of crushed stone aggregates, chippings etc.

of hard stone of following nominal size free of

3 disintegrated pieces deletarious and oraganic mater 14.00 Cu.m 482.08

(for Bitumen surface dressing etc.) and grading as per

I.R.C. Code.(ii)40mm

Spreading the stone aggregate for rolling and W.B.M.

including filling the interstices to required camber

and gradient (excluding spreading of Blindage)(ii)

40mm to 63mm size aggreagates (H.B.)

Spreading blindage or road crust filling the gaps in

5 metal and leveling to camber and gradient as 8.00 Cu.m 159.01

directed.(ii)Sand

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone aggregates

20 mm nominal size) and curing complete excluding

cost of formwork in (A) Foundation and Plinth

Removing dry or oil bound distemper by a washing

and scraping and sand papering the wall surface

smooth including necessary repairs to scratches

Removing dry or oil bound distemper by a washing

and scraping and sand papering the wall surface

8 smooth including necessary repairs to scratches 158.00 Sq.mt 13.54

complete. (b) for removing dry oil bound distemper

on ceilings and sloping roofs.

Item No Description of Item Quantity Unit Amount

Point wiring for Light / Bell with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length , in below

type of pipe erected with 6A Modular type switch /

bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden

box, single mounting base frame covered with

textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary

Lamp holder/ceiling rose / H.D.Connector as

directed.(h) with oval conduit /PVC casing capping

double lock type erected concealed in wall/ceiling

Point wiring for Tissino / Modular secondary light

point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires, in below

type of pipe to be erected complete with earth

continuity and necessary connection with primary

10 light with accessories erected on Metal / PVC / 50.00 Pt. 146.45

wooden box covered with 3 mm thick

PC(Polycarbonate) / Acrylic sheet for open /

concealed wiring. with necessary Lamp holder /

ceiling rose / H.D.Connector as directed. (h) with

oval conduit /PVC casing capping double lock type

erected concealed in wall/ceiling complete

Point wiring for Individual Plug with & earth wire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug

erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall /

ceiling as per pipe erected with following type of

accessories. [II] For 16A Plug and 16 amp switch

with 2-2.5 sq.mm Cu. Wire from mcb db board. (c)

with oval conduit /PVC casing capping double lock

type erected flushed on wall/ceiling complete

Providing & erecting Switch board for Computer or

electric apparatus consisting of following modular

type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame

covered with textured/metallic /white front

12 plate,modules erected with necessary connections as 6.00 Ea 1133.22

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug For Modular Type

Accessories Cat. III

Item No Description of Item Quantity Unit Amount

Providing & erecting Approved make Power Saving

50 Watt Ceiling Fan with double ball bearing ISI

mark with Condenser 230 volt A.C. 50 Hz

13 mm sweep complete having 3blades with aluminium 7.00 Ea 1948.29

blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in

Supplying and erecting approved make oscillating

type bracket fan A.C. 23OV. 50cy/s 400/450 mm

sweep wall mounted with height adjustment and

rotary tilting device complete with guard, flexible

Core plug top complete erected with lead wires as

directed. Cat.II

Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly

painted for fan complete with proper insulation

without leakage and earthing.

Supplying & erecting approved make low noise

decorative exhaust fan having square frame ABS

body with inbuilt lowers & square frame.200mm

Supplying and erecting LED indoor fittings with

LEDs of wattage 0.2 Watt to 0.5 Watt assembled on

single MCPCB, with housing used as a heat sink

shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with

diffuser housed in aluminium casted body with

company mark/name

160V to 270V,Power Factor more than 0.95, THD <

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Square/ Circular

shaped Surface/Recessed Mount Downlight with

provision for spring loaded mounting clips

complete.IP20 (iii) 16-20 watts, Surge-2 KV

Approved make CFL Retrofit 5 / 7 / 9 /11 Watt,

erected if required Cat.III

Item No Description of Item Quantity Unit Amount

Supplying and erecting LED street light / Flood light

fittings with High power White LEDs wattage of

Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/

lenses, with toughened glass with company

mark/name engraved or embossed 160 to

V,Power Factor more than 0.95, THD < 10 %, CCT

3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency >

85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The

Engineer incharge may select any wattage capacity

between the ranges shown.) (A) Street Light (IP-65),

Surge protection -4KV integral and ,Light must have

440VAC line supply with over-voltage protection.

(ii) above 48 to 60 Watts - Cat-lll

Providing and erecting street light pole bracket

comprising main B Class MS pipe of 4.2 cm/require

outside dia. complete with suitable B Class M.S.

sleeve tubing of approx. 45cms.length and suitable

for 76.5 mm / 80mm. / require size pole top having

sufficient fasteners for fixing the brackets and having

spread of 1 mtr. length with suitable rise as per site

condition & suitable welded stiffener reducer and

nipple with check nut complete painted with one coat

of Red oxide / PU base primer and two coats of

Aluminium / PU paint. paint with following nos of

arms. [A] Single Arm bracket 1 Mtr

Providing and erecting Inverter based approved make

split air-conditioning unit consisting of condensing

unit with variable speed fan motor, inverter type

hermetically sealed rotary compressor with

accessories etc. duly connected separately erected

evaporating unit and blower motor with its

accessories by means of extra supplied proper

insulated copper tubing,drain PVC pipes suitable for

( cost includes Eco Friendly green gas charging and

15A plug top & Remote Control & MS Stand) with

necessary core cutting. (1)For 3 Star Rating of current

year (B) for 1.5 ton capacity

Item No Description of Item Quantity Unit Amount

LIGHT WEIGHT CALCIUM SILICATE GRID

Providing and fixing eco-friendly light weight

calcium silicate false ceiling tiles having Tegular edge

& 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight

calcium silicate ceiling tiles shall have , light

reflection 85% non-combustible as per B.S. 476 part

IV, 100% humidity resistance and also having

thermal conductivity 0.043° w/m KC. for the best

22 thermal Insulation. The Light weight calcium Silicate 137.00 Sq.mt 1674.15

tile shall be of approved texture Fine fissured/

Spintone/Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size

595 X 595 mm to be laid on true horizontal level

suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams

per sqm including both side) consisting of main ‘T’

runner suitably spaced at joints to get required length

and size of 24X38mm made from 0.30 mm thick

(minimum) sheet, 1200mm

centre to centre, and cross ‘T’ of size 24X28mm

made out of 0.33mm (Minimum) sheet spaced

1200mm along spaced between main ‘T’ at 600mm

centre to centre to form agrid of 1200X600mm and

secondary cross ’T’ of length 600mm and size

24x28mm made of 0.30 mm thick (Minimum) sheet

to be interlocked at middle of the 1200X600mm

panel to form grid of size 600X600mm resting on

periphery walls/ partitions on a perimeter wall angle

pre-coated steel of size (24X24X3000mm made of

0.40mm) sheet with the help of rawl plugs at 450mm

centre to centre with 25mm long drywall screws @

230mm interval and laying 15mm thick Densified

edges light weight calcium silicate ceiling tiles of

approved texture (Fine Fissured/Cosmos/Spintone) in

the grid including, cutting /making opening for

serviceslike diffusers, grills, light fittings, fixtures,

smoke detectors etc., wherever required,

Item No Description of Item Quantity Unit Amount

Main ‘T’ runners to be suspended from ceiling using

G.I. slotted cleats of size 25X35X1.6mm fixed to

ceiling with 12.5mm dia and 50mm long dash

fasteners, 4mm G.I. adjustable rods with galvanized

steel level clips of size 85X30X0.8mm, spaced at

1200mm centre to centre long main ‘T’ bottom

exposed with 24mm of all T-sections shall be pre-

painted with polyester baked paint, for all heights, as

per specifications, drawings and as directed by

engineer-in-charge.Note:- Only calcium silicate false

ceiling area will be measured from wall to wall. No

deduction shall be made for exposed frames/opening

(cut outs) having area less than 0.30 sqm. The

calcium silicate ceiling tiles shall have NRC. Value

of 0.50 (Minimum) for Fine

fissured/Spintone/Cosmos and 0.75 NRC for Globe,

light reflection 85% non-combustible as per B.S.

part IV, 100% humidity resistance and also having

thermal conductivity. 0.043° w/m KC.for the best

thermal Insulation

Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an required

23 shape even shade after thoroughly brushing the 547.00 Sq.mt 120.26

surface to remove all dirt, and remains of loose

powdered materials.etc complete

Providing dry pressure type Powder Based N2

(Stored Pressure) Low Pressure Extinguisher (Service

24 Pressure ≤19 bar) ABC Powder Based Fire 2.00 Ea 1868.5

Extinguisher Capacity in 9 Kg Class -B FIRE

EXTINGUISHERS as directed by executive incharge

Item No Description of Item Quantity Unit Amount

Providing and fixing 600mm x 450mm bevelled edge

mirrror of superior glass mounted on 6mm thick A.C.

sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers

Providing and fixing C.P. brass towel rail comlete

26 with C.P. brass brackets fixed to wooden plugs with 5.00 Ea 616.42

C.P. brass scews.(B) 600mm x 20mm size.

Providing and fixing 600mm x 120mm glass shelf

27 with C.P. brass bracket and guard rail complete 5.00 Ea 549.53

mixed to wooden plug with C.P. brass screws.

Providing laying and jointing in true line and level

15mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level

25mm dia. U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp

at every two metre C/C or shall be concealed as

directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

Constructing brick masonry chamber for

underground C.I. Inspection chamber and bends with

bricks having crushing strength not less than

35Kg/Cm2 in C.M. 1:5 C.I. cover with frame (Light

duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg.

(Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

30 (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse 3.00 Ea 2932.93

sand :4-graded stone aggregate 20mm size)

foundation concrete 1:5:10 inside plaster 15mm thick

with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed

concrete etc. complete.(i) Inside dimensions

455mmx610mm and 450mm deep for single pipe

31 Providing big plastic bucket use for hostel building 8.00 No. 169.49

Providing small plastic bucket of use for hostel

Providing plastic tumbler of bathroom use for hostel

Item No Description of Item Quantity Unit Amount

34 Providing Door Mat (Big) for hostel building 7.00 No. 254.24

35 Providing Door Mat (Small) for hostel building 5.00 No. 169.49

Providing bathroom mini table (patla) for hostel

37 Providing bathroom mini dustbin for hostel building 5.00 No. 101.69

38 Providing big dustbin for rooms hostel building 10.00 No. 169.49

39 Providing Mini Hanger for Rooms hostel building 30.00 No. 67.8

40 Providing curtain rods for rooms hostel building 14.00 No. 254.24

Providing and erecting water cooler having storage

capacity 80Ltr. & cooling capacity 40 Ltr.per hour @

an ambient temp of 45˚ C. The outlet temp. of the

water should drop by 15˚ C within a hour, The water

cooler should be comprising of hermetically sealed

compressor, fan motor, condensing unit, water tank

surrounded by evaporating coil, thermostats, relay

etc. complete with necessary inlet & outlet

connection. The body of water cooler will be made

from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis

water purification system with M.S. powder coated

frame, prefilter housing with 'O' ring presediment

filter GAC filter, carbon filter suitable buster DC

pump capacity 80 psi, mention with 40 psi inline type

post carbon filter auto low & high pressure switches

with following size of storage tank & LPH capacity

& erected as directed with one year comprehencive

maintainance guarantee [B] 25 Ltr / Hr with 30 Ltr.

S.S.Pressure Tank

Supplying and erecting horizontal / vertical mounting

type storage water heater with copper container

housed in M.S./S.S./ABS body insulated with glass

wool/puff complete with heating elements,adjustable

thermostats 300C to 850C, indicating lamp, safety

valve, fusible plug, etc.complete erected with coach

bolts, nuts. washers & cementation (B)15 Ltr-.with

2 /3K.W. heating element Cat - III

Providing water proofing soloution by painting

inerior surface of existing walls affected by dampness

with 2coats of smartcare hydroloc xtreme primer,

44 1coat of Damp seath interior paint with 2 coat water 6994.00 Sqft 34.55

proofing putty and 2 coat of tractor emulsion paint as

per directed with necessary washing, cleaning and

other requires measures by engineer incharge

Item No Description of Item Quantity Unit Amount

I/We am/are willing to carry out the work at………………….% above/below percent(Should be written in figures and

words) of the estimated rate mentioned above. Amount of my /our

Tender works out as under. Estimated amount put to tender

Estimated amount put to tender

Deduct………% below Add………% Above

In words In words In words In words

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by the

Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items

where there is a change as per actual mix design the cost of difference of cement consumption have been

deducted from the rate of original item at the rate of input rate mentioned in all the tender.

Deputy Executive Engineer Executive Engineer

RTC,WALMI,SURAT RTC,WALMI,SURAT

Deputy Director (Tech.)