DGM/ED-KCP/23-24/16

Amount

Supply of the following line materials

63 kva Distribution Transformer

9.0 mtr long Galvonized Steel Tubular pole

9.0 mtr long PCC pole

8.0 mtr long Galvonized Steel Tubular pole

Stayset complete

Stay wire (7/2.5 mm dia.)

11KV Stay insulator

11kv Polimeric Disc insulator (45KN)

11 kv Disc fittings

11kv Polimeric Pin insulator

LT Shackle insulator

Straps Nuts & Bolts

11kv G.O. Switch, 3 phase

11kv D.O. fuse, 3 phase

11KV L.A (9 KV, 5KA)

M.S. channel (100x50x50x6mm)

M.S. channel (75x50x50x6mm)

M S angle(65x65x6)

M S angle(50x50x6)

ACSR (3/1/2.59 mm dia.)

10swg GI wire

HT Danger plate

Barbed wire

Cut out 200 amps

16mm PVC wire

PVC Cable 120 mm2

Bimetallic Lugs of size 95

Bimetallic Lugs of size 120

Meter CT ratio 100/5 Amps

Fabricated MS Clamp Made of 50x6mm MS Flat for X-arm & Stay set

MS Nuts & Bolts i/c washer of assorted size

2.5 mtr long, 40 mm dia G.I pipe (TATA/ JINDAL make)

Dismentalling of the following line materials

A.C.S.R. (6/1/2.59 mm)

GI Wire (10SWG)

Cradle Guard (HT)

11KV Disc insulator with fittings

11KV Pin Insulator with GI pin

Stay Set Complete

3.2 Mtr. Long MS Angle of Size 65x65x6mm for DT cross arm

2.2 Mtr. Long MS Angle of Size 65x65x6mm for DT cross arm

SP Top X-arm of 0.3 Mtr. Long MS Channel of Size 75x40x40x6mm

SP bottom X-arm of 1.2 Mtr. Long MS Channel of Size 75x40x40x6mm

SP Gaurd X-arm of 1.6 Mtr. Long MS Angle of Size 65x65x6 mm.

DP Top X-arm of 2.2 Mtr. Long MS Channel of Size 75x40x40x6mm.

DP Top Guard X-arm of 2.5 Mtr. Long MS Channel of Size 65x65x6 mm.

9.00 Mtr long Steel pole (D.P.)

9.00 Mtr long Steel pole (S.P.)

Erection of the following line materials

9.00 Mtr. Long Galvonized Steel Tubuler Pole

9.00 Mtr. Long PCC Pole

8.00 Mtr. Long Galvonized Steel Tubuler Pole

3.2 Mtr. Long MS Angle of Size 65x65x6mm for DT cross arm

2.2 Mtr. Long MS Angle of Size 65x65x6mm for DT cross arm

2.8 Mtr. Long MS Channel of Size 100x50x50x6mm for DT support

0.6 Mtr. Long MS Channel of Size 100x50x50x6mm for DT support

2.8 Mtr. Long MS Channel of Size 75x50x50x6mm for GO, DO, LA & GO pipe

2.8 Mtr. Long MS Angle of Size 65x65x6mm for GO handle.

SP Top X-arm of 0.3 Mtr. Long MS Channel of Size 75x40x40x6mm

SP bottom X-arm of 1.2 Mtr. Long MS Channel of Size 75x40x40x6mm

SP Guard X-arm of 1.6 Mtr. Long MS Angle of Size 65x65x6 mm.

DP Top X-arm of 2.2 Mtr. Long MS Channel of Size 75x40x40x6mm.

DP Guard X-arm of 2.5 Mtr. Long MS Angle of Size 65x65x6 mm.

2.5 Mtr. Long MS Channel of Size 75x50x50x6mm for line GO, DO,

1.7 Mtr. Long MS Channel of Size 75x50x50x6mm for11kv line tapping

2.0 Mtr. Long MS Angle of Size 65x65x6mm for tapping guard

0.95mtr. Long MS Angle of size 50x50x6 mm for LT line

0.55mtr. Long MS Angle of size 50x50x6 mm for LT line

11KV polymeric disc insulator with fittings

11KV Polymetric Pin Insulator

LT Shackle insulator

Stay Set Complete

A.C.S.R. (6/1/2.59 mm)

GI Wire (10SWG)

11 KV G.O.S. 3-phase

11 KV D.O.F. 3-phase

11 KV L.A. Set

Cradle Guard (HT)

Danger plate

Erection of barbed wire per pole

63 KVA Distribution Transformer

Providing three phase Service Connection

Construction of Sub-station Fencing with barbed wire, errection supply & errection of barbed wire fencing of MS Angle ( 6Nos. 65x65x6mm & 4Nos . 50x50x6 mm)& provision of gate ( to be fabricated by 35x35x6 mm M.S. Angle-20x6mm M.S. Flat ) fixed with supports of fencing belted at top by 35x35x6 mm M.S. Anglethrough out with provision of hings & locking arragement etc. as per approved design & drawing of ED-KCP .

Earthing with GI pipe 2.5mtr long and 40 mm dia, including excavation, refilling with alternate layer of salt and charcoal as per drawing (excluding supply of GI pipe, salt and charcoal, GI wire, Nuts & bolts etc. As required).

Carriage of the following

Carriage of 8(eight) nos. 63 KVA transformer from store Division A.D. Nagar to Dasda Store yard by mechanical transport including Loading, Un-loading & Stacking etc. as required. .

Carriage of 8.0/9.00 mtr. Length of Galvonized Steel Pole by mechanical transport from Dasda Electrical Sub-Divisional sitestore to work site vis-a-vis including loading, unloading & stacking as required.

a)Upto the lead range of 25 km

i) Beyond 8(eight) poles (250 Nos.)

Carriage of 9.00 mtr. Length of PCC Pole by mechanical transport from Dasda Electrical Sub-Divisional sitestore to work site vis-a-vis including loading, unloading & stacking as required.

a) upto lead of 25 km

i)For maximum 4(four) poles

Carriage of 2(two) nos. 63 KVA transformer from Dasda Electrical Storeyard to work site by mechanical transport including Loading, Un-loading & Stacking etc. as required. .

a)upto the lead range of 25 km

Carriage of line materials such as Cable, AAC, AAAC, ACSR, GI wire, Cross arm, stay set, insulators etc by mechanical transport from the electrical Sub-Divisional sitestore to working site vis-a-vis including loading, unloading & stacking as required.

a)Beyond 25 km upto lead of 50 km

Carriage of materials such as G.O.S, D.O.F, LA etc by mechanical transport from the electrical Sub-Divisional sitestore to working site vis-a-vis including loading, unloading & stacking as required.

a)Beyond 25 km upto lead of 50 km

Manual carriage of 8.00 / 9.00 mtr. Length of Steel tubuler Pole approx. 2km Each pole from Jaliram to Sachindra Parra i/e including loading, unloading & stacking as required.

Manual carriage of line materials approx. 2km such as Cable, AAC, AAAC, ACSR, GI wire, Cross arm, stay set, insulators etc from Jaliram to Sachindra Parra including loading, unloading & stacking as required.

Manually carriage of 63KVA DT with 'Deo' river crossing approx. 500 mtrs. Each pole from Ananda Bazar to Bogichandra including loading, unloading & stacking as required.

Fabrication & Gungle cutting

Fabrication of all X-Arm by M.S Angle, MS Channel etc.

Jungle cutting

Fitting, fixing of Sub-station cable jointing & cutout.