ESTABLISHMENT OF INTEGRATED COLD CHAIN INFRASTRUCTURE FOR PRESERVATION AND VALUE ADDITION AT JARLU (HP) ON ITEM RATE CONTRACT FOR CIVIL, ELECTRICAL WORKS AND EPC FOR THE HVAC WORKS

Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. etc complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/ plying of load carrying motor vehicle of 3.5 cum or more

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, up to plinth level complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government.

Providing and layin Mechanically mixed & vibraed cement concrete 1:2:4 (1cement :2 sand :4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work In foundation and plinth,including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.

Supplying laying of drainage composite for use behind walls, between two different fills, alongside drains of road, below concrete lining of canals etc. Geocomposite for planar drainage, realized by thermobonding a draining core in extruded monofilaments with two filtering nonwoven geotextiles that may also be working as separation or protecting layers. The draining three dimensional core will have a “W” configuration as longitudinal parallel channels. Minimum thickness to be 7.2mm, with two filtering UV stabilized polypropylene nonwoven geotextile of minimum thickness of 0.75mm having pores of 150 micron and tensile strength of 8.0 kN/m that will be working as separation or protecting layer, geocomposite having in plane flow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 18 kN/m , with mass per unit area of 740 gsm, supplied in the form of roll for easy transportation to site of work complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government.

The concrete finish with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. (The panel shuttering work shall be paid for separately).

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge

Providing and laying reinforced cement concrete 1:1½:3( one cement : one and half sand : three graded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) ,mechanically mixed vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. up to plinth level and as directed by Engineer Incharge.

Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per HPPWD specifications and as directed By Engineer Incharge and including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government All works upto plinth level

Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per HPPWD specifications and as directed By Engineer Incharge and including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government . All works above plinth level upto floor V level

Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetra . and mass concrete complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in vertical surfaces such as walls(any thickness) partitions etc. including attached pillasters buttresses, plinth and string cources and the like etc. as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Lintels, beams, plinth beams, girders, bressumers and cantilevers complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plain in any heights / thickness/depths etcetera upto all foor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Flat surfcaes such as soffits of suspended floor, roofs, landings and the like, floors etc. upto 200 mm in thickness complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landings as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government

Providing Tor steel reinforcement of TATA Tiscon/SAIL/Rashtria Ispat incluiding cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position complete in all floor levels in all heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand): 4 graded stone aggregate 12.5mm nominal size) etc., complete. including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth level shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) etc., complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) etc., complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand) etc., complete.,including carriage of material within all leads and lifts as per direction of Engineer-in-charge as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

6 mm (six millimeter) thick cement plaster in celling with cement mortar 1:4 (one cement isto four sand), upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

15 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge etc., complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron)complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..

Providing and fixing aluminium work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) etc., complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.00 mm thickness weight not less than 12.50 kg / sqm etc., complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..

Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the innerside to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for toprail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..

Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.

Providing and fixing 35 mm thick (thirty five milimetre) factory made flush door shutter non-decrative phenol bonded termite resistant and water proof core board with frame of first class hard wood and well match commercial three ply veneer with vertical grain or cross band and face veneeer both face of door IS No.2202 (two thousand two hundred two) of kit ply/Alpro comtax as per Arch drawing as per HPPWD specification 1990 volume-1 includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and fixing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. (a) 300x 16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.: 200x10mm

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :as per the architectural drawings and the directions of engineer-in-charge and complete as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.: 100mm

Providing and fixing aluminium hanging floor door Twin rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete :as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.

Providing and fixing bright finished brass hard drawn hooks and eyes : 150mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete :as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. hooks and eyes : 150mm

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and applying Ceiling White washing with lime to give an even shade : .New work (three or more coats)complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and laying 10mm thick vitrified floor tiles size of 600 x 600mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and laying 10mm thick vitrified floor tiles size of 600 x 600mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.(Skirting)

Providing and laying 8mm thick Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and laying 8mm thick Glazed Ceramic floor tiles skrting of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid Providing and laying 8mm thick Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.n Providing and laying 8mm thick Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverme

Providing and fixing 6mm thick Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by EngineerinCharge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade etc., complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. and as directed by Engineer Incharge at site.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all .,complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing 0.60mm thick prepainted steel sheet of TATA DURASHINE and approved brand and shade and design in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5microns over 5microns primer coating including fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete upto floor all level with all accesoriees as required as per the direction of Engineer-in-charge:-0.60mm (zero point sixty millimetre) thick sheet including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing M.S BP Sheet 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer .,complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing ridges or hips 60cm overall with 0.45mm thick prepainted steel sheets of TATA DURASHINE and approved brand, shade and design in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with G.I. self drilling screws of required sizes / prepainted iron J or L hooks, bolts and nuts 6mm dia and prepainted G.I. limpet and bitumen washers complete upto floor all level with all accessories as required:-0.60mm (zero point sixty millimetre) thick sheet including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing fixing 30cm wide 120cm overall box type gutter with 45mm (milimeter) thick prepainted steel sheet of TATA DURASHINE and approved brand in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster 5microns over 5microns primer coating gutter with iron brackets 40mm X 3mm size bolt and nuts and washers etc. including making necessary connections with rain water pipe copmlete as per design including carriage of material within all leads and lifts as per direction of Engineer-in-charge.²

Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing on wall faces PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/Sq cm including filling the joints with approved adhesive complete. Weep holes 110mm dia pipes etc.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing on walll faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC Plain Bend 110mm dia etccomplete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Supplying and Providung Pre moulded Joint filler, 25 mm thick for expansion joint including all cost 0f materials and labours etc.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.Supplying and Providung Pre moulded Joint filler, 25 mm thick for expansion joint including all cost 0f materials and labours etc.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :Payment to be made per metre cost of total length of barbed wire used.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-inCharge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge.with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying Standardised Pavement Quality Concrete mix M-40 grade with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. completeas per HPPWD specifications and as directed By Engineer Incharge and including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .. (The panel shuttering work shall be paid for separately)

Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer in- charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Painting runway/taxi track/apron marking with adequate nos of coats to give uniform finish with road marking paint of superior make as approved by the Engineer-in-charge, ncluding cleaning the surface of ail dirt, scales, oil, grease and other foreign material etc. and lining out complete.with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.

Manufacturing, supplying and fixing retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, essage (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 5x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification

Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene cryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/- 5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular Shape 600X450 mm Internal dimensions.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and applying integral crystalline (dry shake) of hydrophilic in nature for waterproofing treatment to the RCC structures like basement raft, foundation slab, sewage & water treatment plant slab, warehouses floor, parking structures and water tank base slab etc. sprinkled @0.60 kg per sqm or higher as recommended by the anufacturer’s specification over the lean concrete of above cited structures. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 85%, compared control concrete as per DIN 1048 and resistant to 16 bar ydrostatic pressure on negative side. The crystalline dry-shake shall be capable of self-healing of cracks up to a width of 0.50 mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular Shape 600X450 mm Internal dimensions.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment The product performance shall carry guarantee for 10 years against any leakage.

WATER SUPPLY AND SANITORY INSTALLATIONS WORK:- Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m .

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (25mm Dia) complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (32mm Dia) complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore etc complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 18.74.1 15 mm nominal bore with 30cm length 15 mm nominal bore with 45 cm length complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x 410x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and Fixing of PVC pipes complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment 110 mm dia

75 mm dia

200mm Dia

Providing and Fixing of PVC pipe fittings complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment . 110 mm dia Door bends

plain bends

Plain tee

Door tee

Collars

Providing and Fixing of PVC pipe fittings complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment 75 mm dia Door bends

plain bends

Plain tee

Door tee

Collars

Providing and Fixing of PVC floor trap 75 MM etc.,complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing PTMT Bottle Trap for Wash basin and sink. Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gmscomplete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing PVC Waste pipe for wash basin and sink including PVC waste fittings complete , etc. Semi rigid pvc pipe - 40 mm complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :300 mm inlet and 300 mm outlet Sand cast iron S&S as per IS: 3989 complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Cutting holes up to 30x30 cm in walls including making good the same With common burnt clay F.P.S. (non modular) bricks complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc.with cement concrete 1:2:4 (1cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment

ELECTRICAL WORKS 11KV HT VCB PANEL: (Indoor - Extendable type) Design, Manufacturing, Supply, Installation, Testing and commissioning of Indoor type 11KV HT VCB Panel comprising of the following: Incomer-Outgoing: 1 No. 11KV, 630A, 25KA, Vacuum Circuit Breaker, Horizontal Draw out, Horizontally Isolated with all standard accessories. 630Amps TP Copper Busbar with heat shrinkable sleeves. Complete with 11kV/110V PT, Multi Data meter, CTs, Numerical type Over-current, Short circuit & E/F relays with stabilizing resistor, Phase Indication Lamps, Breaker On/ Off/ Trip and Spring Charge, Trip Circuit healthy indications and Surge Suppressor along with Built-in power pack as per the specifications and local electricity board norms. The VCB should be considered with Annunciators, MDC with CTs, Master Trip relays for all feeders, Transformer Protection Relay for outgoing feeders, Protection CTs, wiring, etc.,

Design, supply, erection, testing and commissioning of 11KV/433V, 630kVA Distribution Transformer, oil cooled type with OLTC with the following specifications. Capacity in kVA: 630 KVA Winding material: Electrolytic Copper Efficiency Level: Level 2 No. of Phases: 3 Phase HV Voltage: 11000 V LV Voltage: 433 V Cooling: ONAN (Oil Natural Air Natural) Reference Standards: IS: 2026; IS: 1180 Frequency: 50 Hz Vector Group: DYn 11 Tapping: On Load Type (OLTC) Tap Changer Range: +5% to -15% Steps/Positions/ Step Range: 16 Steps/ 17 Positions/ 1.25% Type of HV Conductor: TPC Insulated Round Wire Type of LV Conductor: TPC Insulated Rectangular Strip Max. Ambient temperature: 50º C Temperature Rise Oil: 40º C Temperature Rise Winding: 45º C Brand of Kraft Paper used: ITC Transformer Oil Specification: As per IS: 335-1983 Transformer Oil Make: Savita / Apar (Directly Imported) Impedance: 4.50% subject to tolerance as per ISS Stationing Type: Outdoor Class of Insulation: Class A Power Frequency/ Lighting Impulse: 50 kV/ 130 Kv Paint Outdoor: PU Paint

Supply and laying of 3Core x 185 Sq.mm Aluminium 11KV HT Cables, Stranded compacted circular aluminium conductor, Conductor screen with extruded semi conducting compound, XLPE insulated, Insulation screening with Extruded semi conducting compound in combination with copper tape, AL round wire armoured and overall PVC sheathed cable confirming to IS 7098 (Part-2) : MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.

HT END TERMINATIONS: Supply and making Indoor type cable end terminations with heat shrinkable jointing kit complete with all accessories suitable for 11KV, 3core x 185 Sq.mm HT XLPE (E) aluminium conductor cable.

Supply, erection and testing of GI Plate earth electrode as per IS 3043 standards complete with 3 mtrs long, 50mm dia GI pipe, 600 x 600 x 6mm size GI plate and 2 run of 50 x 6mm GI strip upto test link from plate earth electrode, watering funnel and necessary bolt & nuts. Complete with excavation and construction of 450mm x 450mm x 450 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm cast iron / RCC cover with frame. The earth electrode shall be filled with the alternate layer of charcoal and salt. (HT Equipments & DG Body earthing)

Supply, erection and testing of Copper Plate earth electrode as per IS 3043 standards complete with 3 mtrs long, 50mm dia GI pipe, 600 x 600 x 3.15mm size Copper plate and 2 run of 25 x 6mm Copper Strip upto test link from plate earth electrode, watering funnel and necessary bolt & nuts. Complete with excavation and construction of 450mm x 450mm x 450 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm cast iron / RCC cover with frame. The earth electrode shall be filled with the alternate layer of charcoal and salt. (Transformer Neutral, DG Set Neutral & Surge Arrestor Earthing)

Supply and Laying of GI / Copper earth strips on cable tray or below ground as per site condition. All copper strips shall run in pvc heat shrinkable sleeve & mounted on insulation mounts. Cost of civil works shall be included for strips laid below ground. All main GI earth strips joints shall be welded. Anti corrosion chemical compound shall be applied on all welded joints. 50 x 5 mm GI Strip

50 x 5 mm Copper Strip - Transformer Neutral & DG Neutral earthing

25 x 3 mm Copper Strip

4mm dia. Copper wire

Supply, erection, testing and commissioning of MAIN LT PANEL of Cubicle, floor mounting type made out of 14/16 SWG CRCA sheets complete with 1250Amps, TPN Aluminium busbars, Metering compartments, cable chambers, interconnections, powder coated finishing, earthing, etc., EB INCOMER: 1 No. 1250Amps, 4Pole. Electrical D/O type ACB microprocessor based OL, SC and EF releases EB METERING: '1 Set of RYB Phase indication LED lamps 1 set of Breaker ON, Breaker OFF & Breaker TRIP Indication lamps 1 No. Digital type Multi Function Meter (MFM) with RS485 port 1 Set of CT of ratio 1250/5A, class 1 for metering 1 Set of CT of ratio 1250/5A, Class-5P10 for Protection 1 No. 1250/5A CT for APFCR Panel sensing 1 No. CDG-11 Earth Fault Relay 1 Set of Surge Protection Device with MPCB 1 Set of Control MCBs

SUB-SWITCH BOARD-1 (SSB-1): 'Supply, erection, testing and commissioning of SUB-SWITCH BOARD - 1 of Cubicle, floor mounting type made out of 14/16 SWG CRCA sheets complete with 400Amps, TPN Aluminium busbars, Metering compartments, cable chambers, interconnections, powder coated finishing, earthing, etc., INCOMER: '1 No. 400Amps, 35kA 4Pole. MCCB with microprocessor based OL & SC releases METERING: '1 Set of RYB Phase indication LED lamps 1 set of Breaker ON, Breaker OFF & Breaker TRIP Indication lamps 1 No. Digital type Multi Function Meter (MFM) with RS485 port 1 Set of CT of ratio 400/5A, class 1 for metering 1 Set of Surge Protection Device with MPCB 1 Set of Control MCBs ' OUTGOINGS: 1 No. 160Amps, TP+N, 25KA, MCCB with (TM based) OL & SC releases 3 Nos. 100Amps, TP+N, 25KA, MCCB with (TM based) OL & SC releases 3 Nos. 63Amps, TP+N, 25KA, MCCB with (TM based) OL & SC releases 11 Nos. 40Amps, 4Pole MCB

SUB-SWITCH BOARD-2 (SSB-2) 'Supply, erection, testing and commissioning of SUB-SWITCH BOARD - 2 of Cubicle, floor mounting type made out of 14/16 SWG CRCA sheets complete with 160Amps, TPN Aluminium busbars, Metering compartments, cable chambers, interconnections, powder coated finishing, earthing, etc. INCOMER: '1 No. 160Amps, 25kA 4Pole. MCCB with TM Based OL & SC Releases METERING: '1 Set of RYB Phase indication LED lamps 1 set of Breaker ON, Breaker OFF & Breaker TRIP Indication lamps 1 No. Digital type Multi Function Meter (MFM) with RS485 port 1 Set of CT of ratio 160/5A, class 1 for metering 1 Set of Surge Protection Device with MPCB 1 Set of Control MCBs OUTGOINGS: 1 No. 100Amps, TP+N, 25KA, MCCB with (TM based) OL & SC releases 4 Nos. 63Amps, 4Pole MCB 4 Nos. 40Amps, 4Pole MCB 5 Nos. 25Amps, 4Pole MCB

LT POWER & CONTROL CABLES: Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable '3.5C X 240 Sq.mm XLPE Aluminium armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable 3.5C X 185 Sq.mm XLPE Aluminium armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable3.5C X 150 Sq.mm XLPE Aluminium armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable 3.5C X 120 Sq.mm XLPE Aluminium armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable3.5C X 70 Sq.mm XLPE Aluminium armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable3.5C X 50 Sq.mm XLPE Aluminium armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable3.5C X 35 Sq.mm XLPE Aluminium armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable4C X 25 Sq.mm XLPE Aluminium armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable4C X 16 Sq.mm XLPE Aluminium armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable4C X 4 Sq.mm XLPE Copper armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable 3C X 4 Sq.mm XLPE Copper armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable 3C X 2.5 Sq.mm XLPE Copper armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable 4C X 2.5 Sq.mm XLPE Copper armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable 24C X 2.5 Sq.mm XLPE Copper armoured cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable'3C X 1.5 Sq.mm Copper flexible cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable'3C X 2.5 Sq.mm Copper flexible cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable '4C X 1.5 Sq.mm Copper flexible cable

Supply, laying and testing of 1.1KV grade XLPE insulated Aluminium / Copper conductor armoured cables as per the latest specifications and laid cable trays including clamping of the cables as per the standards '3.5C X 300 Sq.mm XLPE Aluminium armoured cable 4C X 2.5 Sq.mm Copper flexible cable

CABLE END TERMINATIONS: 'Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'3.5C X 300 Sq.mm XLPE Aluminium armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'3.5C X 240 Sq.mm XLPE Aluminium armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'3.5C X 185 Sq.mm XLPE Aluminium armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'3.5C X 150 Sq.mm XLPE Aluminium armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'3.5C X 120 Sq.mm XLPE Aluminium armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'3.5C X 70 Sq.mm XLPE Aluminium armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'3.5C X 50 Sq.mm XLPE Aluminium armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'3.5C X 35 Sq.mm XLPE Aluminium armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'4C X 25 Sq.mm XLPE Aluminium armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'4C X 16 Sq.mm XLPE Aluminium armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'4C X 4 Sq.mm XLPE Copper armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'3C X 4 Sq.mm XLPE Copper armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'3C X 2.5 Sq.mm XLPE Copper armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables) '4C X 2.5 Sq.mm XLPE Copper armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'24C X 2.5 Sq.mm XLPE Copper armoured cable

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'3C X 1.5 Sq.mm Copper flexible cable (PG Gland)

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'3C X 2.5 Sq.mm Copper flexible cable (PG Gland)

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'4C X 1.5 Sq.mm Copper flexible cable (PG Gland)

Supply and erection of cable end terminations using double compression type Cable glands, crimping type aluminium / copper lugs, gland earthing, et., as per the standards (PG Gland for Flexible cables)'4C X 2.5 Sq.mm Copper flexible cable (PG Gland)

MS POWDER COATED LADDER / PERFORATED CABLE TRAYS: 'Supply and installation of 2mm thickness MS Powder coated type Ladder type / 1.6mm thick Perforated type cable tray with coupler plates, bends, anchor fasteners, etc., and the rate is inclusive of MS steel supports / GI thread rod supports for the cable trays.'750mm x 75mm Ladder Tray

Supply and installation of 2mm thickness MS Powder coated type Ladder type / 1.6mm thick Perforated type cable tray with coupler plates, bends, anchor fasteners, etc., and the rate is inclusive of MS steel supports / GI thread rod supports for the cable trays.'600mm x 75mm Ladder Tray

Supply and installation of 2mm thickness MS Powder coated type Ladder type / 1.6mm thick Perforated type cable tray with coupler plates, bends, anchor fasteners, etc., and the rate is inclusive of MS steel supports / GI thread rod supports for the cable trays.'450mm x 50mm Ladder Tray

Supply and installation of 2mm thickness MS Powder coated type Ladder type / 1.6mm thick Perforated type cable tray with coupler plates, bends, anchor fasteners, etc., and the rate is inclusive of MS steel supports / GI thread rod supports for the cable trays.300mm x 50mm Ladder Tray

Supply and installation of 2mm thickness MS Powder coated type Ladder type / 1.6mm thick Perforated type cable tray with coupler plates, bends, anchor fasteners, etc., and the rate is inclusive of MS steel supports / GI thread rod supports for the cable trays.300mm x 50mm Perforated Tray

Supply and installation of 2mm thickness MS Powder coated type Ladder type / 1.6mm thick Perforated type cable tray with coupler plates, bends, anchor fasteners, etc., and the rate is inclusive of MS steel supports / GI thread rod supports for the cable trays.150mm x 50mm Perforated Tray

Supply and installation of 2mm thickness MS Powder coated type Ladder type / 1.6mm thick Perforated type cable tray with coupler plates, bends, anchor fasteners, etc., and the rate is inclusive of MS steel supports / GI thread rod supports for the cable trays.100mm x 50mm Perforated Tray

Supply and installation of 2mm thickness MS Powder coated type Ladder type / 1.6mm thick Perforated type cable tray with coupler plates, bends, anchor fasteners, etc., and the rate is inclusive of MS steel supports / GI thread rod supports for the cable trays.1.2mm thickness Cover for the above cable trays

EARTHING SYSTEM: (LT Side): Supply, erection and testing of GI Pipe earth electrode as per IS 3043 standards complete with 4.5 mtrs long, 50mm dia GI pipe and 1 run of 50 x 6mm GI strip upto test link from plate earth electrode, watering funnel and necessary bolt & nuts. Complete with excavation and construction of 450mm x 450mm x 450 mm high brick wall chamber with cement mortar. The chamber shall be provided with 450mm x 450mm cast iron / RCC cover with frame. The earth electrode shall be filled with the alternate layer of charcoal and salt

GI / COPPER EARTH STRIPS: Supply and Laying of GI / Copper earth strips on cable tray or below ground as per site condition. All copper strips shall run in pvc heat shrinkable sleeve & mounted on insulation mounts. Cost of civil works shall be included for strips laid below ground. All main GI earth strips joints shall be welded. Anti corrosion chemical compound shall be applied on all welded joints.50 x 5mm GI Strip

GI / COPPER EARTH STRIPS: Supply and Laying of GI / Copper earth strips on cable tray or below ground as per site condition. All copper strips shall run in pvc heat shrinkable sleeve & mounted on insulation mounts. Cost of civil works shall be included for strips laid below ground. All main GI earth strips joints shall be welded. Anti corrosion chemical compound shall be applied on all welded joints.25 x 5mm GI Strip

GI / COPPER EARTH STRIPS: Supply and Laying of GI / Copper earth strips on cable tray or below ground as per site condition. All copper strips shall run in pvc heat shrinkable sleeve & mounted on insulation mounts. Cost of civil works shall be included for strips laid below ground. All main GI earth strips joints shall be welded. Anti corrosion chemical compound shall be applied on all welded joints.4mm dia. Copper wire

Supply and erection of Electrical Safety items of ISI approved Rubber mats, 11KV & 415V Hand gloves, First aid chart with frame, Fire buckets, First aid box, Fire extinguishers, 11KV HT & LT Danger boards, Danger stickers, Authorised entry boards, etc., as per Electrical Inspector requirements

LIGHTING WIRING AND POWER WIRING Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated Flame resistant flame retardant (FRLSH) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. FRLSH insulated single core copper conductor cable as required and complete with 6Amps SP Switch, GI metal / surface PVC box, interconneciton all the wiring accessories, etc., MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel, Metal Box-Havells, Legrand, MK Electric. Switch- Havells, Legrand, MK Electric or any other approved by Engineer-in-Charge. (Avg. 12 Mtr)

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated Flame resistant flame retardant (FRLSH)and low smoke single core (flexible) copper conductor cable in surface steel MS conduit and earthing the light point with 1.5 Sq.mm FRLSH insulated single core copper conductor cable as required and complete with 6Amps SP Switch, GI metal / surface PVC box, interconneciton all the wiring accessories, etc., MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel, Metal Box-Havells, Legrand, MK Electric. Switch- Havells, Legrand, MK Electric or any other approved by Engineer-in-Charge. (Avg. 10 Mtr)

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLSH PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLSH PVC insulated copper conductor single core cable etc. as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabelor any other approved by Engineer-in-Charge. (Avg. 6 Mtr)

Wiring for light plug with 2x1.5 Sq. mm. PVC insulated Flame resistant flame retardant (FRLSH) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. FRLSH insulated single core copper conductor cable for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabelor any other approved by Engineer-in-Charge.

Wiring for light plug with 2x2.5 Sq. mm. PVC insulated Flame resistant flame retardant (FRLSH) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.2.5 Sq.mm. FRLSH insulated single core copper conductor cable for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other approved by Engineer-in-Charge.

Wiring for power plug with 2x4 Sq. mm. PVC insulated Flame resistant flame retardant (FRLSH) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. FRLSH insulated single core copper conductor cable for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other approved by Engineer-in-Charge.

Supplying and fixing 3 Module GI metal box with 1 No. 6Amps, 3pin socket outlet controlled by 6Amps, SP Switch with suitable PVC Front plate and frame with interconnection and fixing accessories, etc., as per site conditions. MAKE: Legrand, MK Electric (Honeywell), Havells or any other approved by Engineer-in-Charge.

Supplying and fixing 3 Module GI metal box with 1 No. 6/16Amps, 3/5pin socket outlet controlled by 16Amps, SP Switch with indicator with suitable PVC Front plate and frame with interconnection and fixing accessories, etc., as per site conditions. MAKE: Legrand, MK Electric (Honeywell), Havells or any other approved by Engineer-in-Charge.

Supply and installation of Industrial range LED 80W -5700K with the followings 1) MS Powder coated with PC Opal Diffuser, 2) System lumen output-8000lm, 3)System efficacy of 100lm/W, 4) Rated system life of 50,000BH @L70, 5) CCT-5700K and CRI>80, 5) Protection:IP65& THD<10%, PF>.95, 6) Operating Temperature: -10deg C to +45deg C, 7) Operating Voltage Range:140V -270V including mounting the fixture, testing etc. as required complete in all respects with two year warranty . Make:- Havells , Philips, Wipro, Bajaj, Panasonic or any other approved by Engineer-in-Charge.

Supply and installation of Indoor Industrial Range LED 20W -5700K 4feet long Batten light fittings with the followings, 1) Extruded aluminium housing, 2)System Lumens-2200Lm, CRI>80, 3) CCT:5700K, THD<15%, PF>0.95, IP20, IK03, 4) Operating Temperature: -10deg C to +45deg C, 5) Input Voltage Range:140-270V including mounting the fixture, testing etc. as required complete in all respects with two year warranty. Make:- Havells , Philips, Wipro, Bajaj, Panasonic or any other approved by Engineer-in-Charge.

Supply and installation of Indoor Industrial Range LED 40W -5700K 4feet long Battens with the followings, 1) Surface mounted Aluminium housing with Polycarbonate diffuser, 2) System Lumens-4600Lm, CRI>80, 3) CCT:5700K, THD<10%, PF>0.95, IP20, IK03, 4) Operating Temperature: -10deg C to +45deg C, 5) Input Voltage Range:140-270V including mounting the fixture, testing etc. as required complete in all respects with two year warranty . Make:- Havells , Philips, Wipro, Bajaj, Panasonic or any other approved by Engineer-in-Charge.

Supply and installation of round type surface / recessed mounted type 15Watts LED down light fitting with CRI>80, 3) CCT:5700K, THD<10%, PF>0.95, IP20, IK03, 4) Operating Temperature: -10deg C to +45deg C, 5) Input Voltage range:140-270V including mounting the fixture, testing etc. as required complete in all respects with two year warranty . Make:- Havells , Philips, Wipro, Bajaj, Panasonic or any other approved by Engineer-in-Charge.

Supply and installation of exhaust fan Light duty, (Domestic) 300 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Make: Havells, Usha, Orient, Crompton or any other approved by Engineer-in-Charge.

Supply and installation of 1200mm Sweep Ceiling fan of 5Star rated, interconnections, testing and commissioning etc. as required:- Make: Havells, Usha, Orient, Crompton or any other approved by Engineer-in-Charge.

Supplying and fixing following ways Three phase sheet steel MCB Distribution Board 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make: Havells, Legrand, L&T or any other approved by Engineer-in-Charge. Double door-8 way

Supplying and fixing following ways Three phase Vertical TPN Power Distribution Board 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make: Havells, Legrand, L&T or any other approved by Engineer-in-Charge. 8 way, Double door MCCB Incomer

Supplying and fixing following ways Single phase sheet steel MCB Distribution Board 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make: Havells, Legrand, L&T or any other approved by Engineer-in-Charge. Double door-12 way

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 30 milliampere in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells, Legrand, L&T or any other approved by Engineer-in-Charge. 25Amps, 30mA DP

Supplying and fixing Double pole 6 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells, Legrand, L&T or any other approved by Engineer-in-Charge.

Supplying and fixing Single pole 6 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells, Legrand, L&T or any other approved by Engineer-in-Charge.

Supplying and fixing Three pole 6 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells, Legrand, L&T or any other approved by Engineer-in-Charge.

Supplying and fixing Four pole 63 Amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells, Legrand, L&T or any other approved by Engineer-in-Charge.

Supplying and fixing of 100Amps, 25kA TP MCCB in the existing VTPN MCCB incomer DB with spreader terminals as incomer

Supplying and fixing of 4Way metal enclosure suitable for DP / 4P MCBs with all the fixing accessories, etc.,

Supply, Installation, testing and commissioning of 650KVA Silent type Diesel Generator Set complete with suitable size Acoustic enclosure. Diesel Engine suitable for Generator application, developing 1500RPM with an overloading capacity of 10% for one hour in any 12 continuous hours operation generally confirms to BS:5514, directly coupled to 650KVA at 0.8 Power factor, 415V, 3Phase , 4wires, 50cycles per second self excited, self regulated, with brushless excitation, Alternator generally confirms to BS:5000/IS:4722. DG set shall be complete with radiator, residential type silencer, electronic governor, cable termination box, MS mounting frame, fuel piping, diesel day tank, 24VDC Battery, Battery mounting frame, oil level indicator with gauge board, and all other accessories as per standards. Diesel Generator set shall be mounted on cushy foot or similar type of vibration Isolators. The cost of Exhaust pipe shall be excluded in this item. The DG Set shall be suitable for auto-mains failure start and auto / manual operations. The cost shall include fuel oil required for testing DG Set at full load. The DG Should be supplied with Auto-Start-Stop Control panel with suitable rating switchgear.

Supply and providing exhaust piping complete with exhaust pipe, fibre glass insulation with aluminium cladding, pipe accessories like flanges, bends, elbows, rain protection hoods, etc.. The exhaust piping shall be fixed from floor with MS angle supports, using necessary clamps, anchor bolts, vibration isolation pads, etc., as shown in the drawing. Pipe size shall be suitable for 650 KVA DG Set Exhaust pipe 200mm dia 5mm thick MS pipe with all necessary fittings.

Mineral wool / glass wool lagging for exhaust pipe system including aluminium cladding for above pipe (200mm dia)

Residential Silencer for 650KVA DG Set

Supply and erection of Exhaust pipe Stack supporting system with ISMC, ISA complete including red oxide and black enamel painting, etc.,

FIRE FIGHTING & ALARM SYSTEM Supply, Erection, testing & commissioning of electrical motor driven Sprinkler Pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 2850LPM (171 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting, coupling, coupling guard and base plate for pump, fabricated mild steel channel,foundation bolts, and pump should have the dry run sensor provision, etc., as per local fire brigade requirement . The pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump shall be coupled to electrical motor of 65 HP with speed of 2900 RPM, Electric supply 415V, 50 Hz and complete set shall be mounted on a common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts etc. RCC foundation is under civil scope.

Supply, Erection, testing & commissioning of Diesel Engine driven common stand by pump, horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 2850LPM (171 m³/ Hr) at 70MWC with all necessary accessories like bronze impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting, coupling, gear box, base plate for pump, fabricated mild steel channel with foundation bolts etc., It includes providing and fixing fuel oil tank (capacity as per TAC requirements) with supports and necessary pipe works for diesel engine, battery and battery charger to be connected to control panel of diesel engine and exhaust silencer including necessary pipe work and lagging, pump should have the dry run sensor provision, etc., and shall be automatic in operation diesel engine control panel with 24V DC storage battery & its battery charger with required Ampere - hour rating, terminal box (2 nos. of 12volts), cooling water line for engine with required pipes / valves / fittings etc., as per TAC including all associated electrical works. The pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump shall coupled to Diesel engine, radiator water cooled type with speed of 1800RPM and complete set shall be mounted on common base frame. Batteries & battery leads with stand, 200 liters capacity Fuel tank ( for 4 Hrs. operation ) with stand & gauge glass, Fuel piping with valves. The quoted rate shall includes radiator water cooling piping(if required) coupling gaurd and other stanadrd accessories and foundation bolts, etc. complete. RCC foundation is under civil scope.

Supply, erection, testing & commissioning of electrical motor driven Jockey pump of horizontal centrifugal end suction back pull out type with gland packing and capable to deliver 180LPM (10.8 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting pad and flexible connections at discharge end of the pipes, pump should have the dry run sensor provision etc. and shall be automatic in operation.The pump shall be coupled to motor of 15 HP with speed of 2900RPM and complete set shall be mounted on common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts etc. RCC foundation is under civil scope.foundation is under civil scope

Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. 2R x 3.5 core x 50 sqmm Aluminium conductor cable for Electrical motor Driven pump.

Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. 4 core x 16 sqmm Aluminium conductor cable for Jockey Pump.

Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. 12 core x1.5 sqmm Copper cable for Diesel Engine pump

Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. 2 core x 1.5 sqmm Copper cable for pressure switch

Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. 4 core x 2.5 sq mm Copper cable for MCC to ESP interlocking.

Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 500 mm.Size of the tray shall be suitable for laying the above mentioned cables.

G.I. Earthing strips of 50mm x 6mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with necessory accessories as required.

Supplying, installing, testing and commissioning of M.S Pipes, ERW confirming to IS 1239 Pt - I Class 'C' Heavy grade up to 150mm dia and pipes 200mm dia and above shall be G.I as per IS: 3589 (6mm Wall thick) with painting, suitable type of supports, anchor fasteners, bolts nuts ( Galvanised), clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete. 200mm nominal dia

Supply, fixing, testing and commissioning of air vessel tank shall be fabricated out of of 450 mm dia MS pipe to 1500 mm long complete with 25mm inlet, 25mm drain, 25mm dia connection for air release valve including legs, painting with red oxide primer and finished with fire red enamel paint. It shall be inclusive of all relevant pipes, valves, specials upto pump header and other accessories etc., complete.

Exhuast pipe for Diesel engine of 100 mm dia M.S. Medium grade with mineral wool insulation with aluminum sheet. The quoted rate shall include 100 mm diameter MS pipe medium grade conforming to IS 1239 Part-1 and mineral wool insulation with aluminum sheeting and Pipe supports also.

INTERNAL HYDRANT SYSTEM Supplying, installing, testing and commissioning of 150mm nominal dia M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material etc., complete.

Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312 swing check type with required flanges, nuts, bolts and gaskets etc. complete. 150mm nominal dia (Four Way FBI)

Supplying, Installing, testing and commissioning of 150 mm nominal dia C.I wafer type butterfly valves PN-16as per IS 13095 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.

Supplying, installing and commissioning of fire brigade inlet connection of 4 way with 1 no. 63 mm dia. built - in Gun metal instantaneous coupling type arranged on 150 mm dia. Quoted rate shall be included M.S. cabinet of suitable size with mounting supports etc. complete.

Supplying, erecting and commissioning of Single headed hydrant valve as per IS 5290, made of gunmetal with 63 mm dia instantaneous outlet of 80 mm dia fanged inelt ,Blank caps , chain and hand wheels etc., complete.

Supplying, erecting and commissioning of Gun Metal 15 M long, 63mm dia RRL hose conforming to IS 636 Type A with instantaneous couplings and Hoses shall be stored inside fire duct on wall with firmly fastened steel rod etc., complete.

Supplying, erecting and commissioning of Gun metal short branch pipe with nozzle conforming to IS 903 etc., complete.

Supplying, erecting and commissioning of First aid Hose reel drum of 180° swinging type with 20 mm dia Rubber braided hose of 30M. length with Ball Valve and 6mm diameter Shut off nozzle etc., complete.IS 884

Supplying, erecting and commissioning of M.S. Hose Box stand mounted type fabricated out of M.S. sheet of 16 swg. with glass fronted ( 4mm thick glass with rubber beeding) door and size of the cabinet shall be 600mm x 750 mm x 250 mm Quoted rate shall be includes suitable stand for mounting, all fasteners etc, and cabinet shall be powder coated of approved colour both inside and outside etc., complete

Supplying and fixing approved make of 25mm dia automatic air release valve spring loaded type complete with unions etc. complete.

Supplying, installing, testing and commissioning of 25mm nominal dia Gun metal chrome finished Ball valves with fittings of screwed end type.

Supplying and erecting of Pre fabricated M.S structural steel supports such as angle, Channel, Plate etc. conforming to relevant IS standards for laying above ground Hydrant Pipe etc., complete.

Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 100mm nominal dia

Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 80mm nominal dia

Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 65mm nominal dia

Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 50mm nominal dia

Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 40mm nominal dia

Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 32mm nominal dia

Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 25mm nominal dia

Supplying, Installing, testing and commissioning of 150 mm nominal dia C.I wafer type butterfly valves PN-16as per IS 13095 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.

Supplying, Installing, testing and commissioning of 100 mm nominal dia C.I wafer type butterfly valves as per IS 13095 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.

Supplying, Installing, testing and commissioning of 80 mm nominal dia C.I wafer type butterfly valves as per IS 13095 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.

Supplying, installing, testing and commissioning conventional Pendent Sprinkler quartzoid bulb type with 15mm screwed end connection of 68 deg. C. temperature rating, K 80 and orifice shall not be less than 12.7mm.Sprinklers shall be UL Listed / FM approved with Chrome finished.

Supplying, installing, testing and commissioning conventional Pendent sprinkler quartzoid bulb type with 20mm screwed end connection of 68 deg. C. temperature rating, K 115 and orifice shall not be less than 13.5mm.Sprinklers shall be UL Listed / FM approved with Chrome finished.

Supplying, installing, testing and commissioning conventional Pre action Pendent Sprinkler quartzoid bulb type with 20mm screwed end connection of 68 deg. C. temperature rating, K 115 and orifice shall not be less than 13.5mm.Sprinklers shall be UL Listed / FM approved with Chrome finished.

Supplying, installing, testing and commissioning of Hydraulically operated Alarm Control valve complete with Ductile iron body & clapper conforming to ASTM A536 with water motor gong bell and basic trims as required, pressure gauges, pressure swich, drain valves etc. complete. The alarm valve shall be UL Listed / FM approved. 150 mm dia

Supplying, installing, testing and commissioning of factory assembled packaged preaction system complete with Pre action valve, air compressor, riser check valve, powder coated cabinet with Ductile iron body & clapper conforming to ASTM A536 with water motor gong bell and basic trims as required, pressure gauges, pressure swich, drain valves etc. complete with all accessories. 150 mm dia.

Supplying, Installing, testing and commissioning of 150 mm nominal dia C.I Gate/Sluice valves Pn-16as per IS 780 standared l with required flanges, nuts, bolts etc. complete.

Supplying, installing, testing and commissioning of flow switch (water flow detector) on sprinkler distribution header on each floor and shall be connected to Sprinkler annunciation panel for monitoring the status of the flow switch. 150 mm nominal dia

Supplying, installing, testing and commissioning of flow switch (water flow detector) on sprinkler distribution header on each floor and shall be connected to Sprinkler annunciation panel for monitoring the status of the flow switch. 80mm nominal dia

Supplying, installing, testing and commissioning of Pressure Gauge on sprinkler distribution header on each floor 150 mm nominal dia

Supplying, installing, testing and commissioning of Pressure Gauge on sprinkler distribution header on each floor 80mm nominal dia

Supplying and fixing approved make 25mm dia. automatic air release valve with unions etc. complete.

Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. 50mm dia.(Drain connection)

Supply & fixing of approved type rosette plates ( Surface mounted type, in two piece) for Sprinklers below false ceiling area. The Rosette shall be fabricated by M.S. plate of 2mm thick and the finish shall be powder coated and color shall be as approved by Engineer.

Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes: 1500mm

Supplying, installing, testing and commissioning of photo electric (optical) smoke detector with base, junction box and other accessories (Above & Below false ceiling ) etc., complete.

Addressable rate of rise Heat detector with base, Junction box and other accessories as required.

Analogue Addressable Fault isolator module capable of monitoring shorted loop circuit and automatically restore communications when shorted conditions are corrected etc., complete.

Analogue Addressable Input/Output Module or control module for Lift shut down & connecting conventional devices with fire alarm system (Hooter) etc., complete.

Supplying, installing, testing and commissioning of Addressaable sounder cum strobe etc., complete.

Supplying, installing, testing and commissioning of Addressable Manual Call Point with back box. Back box will be flushed on wall etc., complete.

Supplying and laying of 2x1.5 sqmm twisted fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring and LSZH outer sheathof red colour complete as required.

Supplying, installing, testing and commissioning of power supply unit which provides 24V DC output for connecting all relay control modules and other modules. one number of 7AH battery with all accessories and multiple terminal connections. The power supply unit will be located in BMS room at ground floor and in designated location preferably near to FA/PA shaft in typical floors etc., complete.

Supplying, installing, testing and commissioning solid state Amplifier of 500 W RMS out put in rack, including necessory control wires, jacks etc. complete.

Supplying, installing, testing and commissioning of 15W RMS, 110V, 106dB sound level wall mounted horn speaker with all mounting accessories etc., complete.

Supplying, installing, testing and commissioning of 6W RMS, 110V, 106dB sound level Ceiling speaker with all mounting accessories etc., complete.

Supply and laying 2x1.5 sqmm multi stranded copper conductors cable, twisted,Shielded, LSZH sheathed, armoured control cables.

Supplying, installing, testing and commissioning of 6-zone call station with keyboard and all accessories etc., complete.Providing and Fixing of Gooseneck Microphone with call station. Features : Dynamic Directivity: Cardioid Frequency response : 100Hz÷12 kHz Sensitivity: (OdB-1V/micro bar,1000 Hz) -75dB±3dB Output impedance :500ohm etc., complete.

Providing & Fixing of duly wired Equipment Rack to accommodate all above mentioned control equipment like console, amplifier, DVD player etc., complete.

EXTINGUISHER & SIGNAGES Supplying, installing and commissioning of Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas as per IS 15222 with controll discharge mechanism fitted with Hose & Horn applicable on Class B fire rating 21B confirming to IS: 15683 etc., complete.

Supplying, installing and commissioning of Mechanical Foam type fire extinguisher 9Lts. Capacity, stored pressure type controllable discharge mechanism. confirming to IS: 15683 etc., complete.

Supplying, installing and commissioning of ABC powder type fire extinguisher of 6 Kgs. Capacity, with initial filling (Mono Ammonium Phospate Powder 90) in brand new cylinder with powder coated finish, Stored Pressur type, Pressure Gauge, Controllable discharge mechanism with Hose & Nozzle , confirming to IS:15683. (ABC Dry Chemical Powder- MAP 90%) etc., complete.

Supplying, installing and commissioning of Mechanical Foam 50 ltr capacity Fire Extinguisher Powder Coated MS Body , Upright Type With Brass Forged Cap, 3 Mtr. Hose with ABS Foam making Nozzle, 300 gms CO2 Cartridges, 3 Ltrs AFFF 6% Liquid, Mounted on Trolley wheels complete with all accessories as Per IS:13386. The extinguisher should carry ISI mark etc., complete.

Supplying, installing and commissioning of ABC Dry chemical powder type fire extinguisher of 25 Kgs. Capacity, trolley mounted type with initial filling (Mono Ammonium Phospate Powder 90) in brand new cylinder with powder coated finish, Stored Pressur type, Pressure Gauge, Controllable discharge mechanism with Hose & Nozzle , confirming to IS:10658. The extinguisher shall be ISI marked etc., complete.

Supplying, installing and commissioning of Fire buckets round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket etc., complte.

Supplying, installing and commissioning of Fire bucket stand fabricated by MS angles to install 4 Nos. of buckets etc., complete.

Providing and installing in position the following type of photoluminiscent safety sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut. PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. Signages with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of 1.5cm height letters in red with white back ground. The size of the board shall be 25cm * 30cm and shall be fixed at the height of 2mts, from finished floor near Manual Call Points etc., complete.

Providing and installing in position the following type of photoluminiscent safety sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut. PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. Floor indentification signage (i.e, GROUND FLOOR… ETC.,) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground. Size shall be 15cm * 60cm etc., complete.

Providing and fixing in position the signage of " Incase of fire do not use Lift Size 8" x 8" etc., complete.

Providing and fixing in position the signage of " Fire Extinguisher " to be pasted immediately above the every extinguisher. Size 4" x 4" etc., complete.

Providing and fixing in position the signage of " Fire Hydrant & Hose Reel " to be pasted on door of the every fire shaft at all floors. . Size 6" x 8" etc., complete.

Providing and fixing in position the signage of " Manual Call Point " to be pasted on door of the every fire shaft at all floors. . Size 6" x 8" etc., complete.

Providing and fixing in position the sign board of " ASSEMBLY POINT " complete with 1 mm thick rigid plastic board size of 600 mm x 600 mm to be fixed on ground by using a steel rod / pipe at designated etc., complete.

Providing and fixing in position the signage of " Fire alarm Panel " Size 6" x 8" etc., complete.

Providing and fixing in position the signages "FIRE ORDER" it should contain the following matter on 3mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of 3' * 4' etc., complete.

PUF PANEL Design, supply, erection, testing and commissioning of CA manual sliding door of size 2.4 m (W) x 3.5 m (H) with 100 mm PUF insulation, complete with all accessories, hardware, sealing gaskets, fittings and consumables as per specifications, including all required items to ensure successful commissioning and proper functioning Supply of CA manual sliding door ; 2.4m x 3.5m- 100mm puf insulation Metaflex/Equivalent approved by Engineer incharge

Instalation of CA sliding door for all CA chamber along with Accessories

Packing Charges for CA Door Using Wooden Crates

Design, Detailing, Approval of Client, Supply, erection, Testing and commission of entire system for PUF Panels for wall, ceiling and floor insulation. The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commissioning of the system. Coldwell PUF Panels (60 mm thick) with double tongue and groove joints ; Rigid PUF Coldwell panel made out of Inner and outter in micrribbed PPGL sheet with CFC free pentane Blown polyurethane foam as the core which is injected between the 2 sheets with highly sophisticated computer controlled foaming machine. The panel is manufactured by using continuous foaming method. COLDWELL PUFF PANEL PREFABRICATED Polyurethane sandwich panels comprising of exterior with micro ribs and 1000 mm cover width made out of 0.50 mm TCT- OUTER SIDE ( SDP Coated ) 300 Mpa yield strength, color coated galvalume steel, AZ 150 with 20 microns polyester paint and Interior with micro ribs and 1000 mm cover width made out of 0.50 mm TCT -INNER SIDE ( SDP Coated ) 300 Mpa yield strength, color coated galvalume steel, AZ 150 with 20 microns polyester paint .Core - CFC / HCFC free Pentane Blown Polyurethane foam density of 40 +- 2 Kg / m3 in 60 mm thick shall be supplied in 1.000 mtr. APPROVED COLOR : RAL 9002 OFF WHITE ON INNER AND OUTER SHEET

Supply of Coldwell PUF Panels (120 mm thick) with double tongue and groove joints Rigid PUF Coldwell panel made out of Inner and outter in micrribbed PPGL sheet with CFC free pentane Blown polyurethane foam as the core which is injected between the 2 sheets with highly sophisticated computer controlled foaming machine. The panel is manufactured by using continuous foaming method. COLDWELL PUFF PANEL PREFABRICATED Polyurethane sandwich panels comprising of exterior with micro ribs and 1000 mm cover width made out of 0.50 mm TCT- OUTER SIDE ( SDP Coated ) 300 Mpa yield strength, color coated galvalume steel, AZ 150 with 20 microns polyester paint and Interior with micro ribs and 1000 mm cover width made out of 0.50 mm TCT -INNER SIDE ( SDP Coated ) 300 Mpa yield strength, color coated galvalume steel, AZ 150 with 20 microns polyester paint .Core - CFC / HCFC free Pentane Blown Polyurethane foam density of 40 +- 2 Kg / m3 in 120 mm thick shall be supplied in 1.000 mtr. APPROVED COLOR : RAL 9002 OFF WHITE ON INNER AND OUTER SHEET

Supply of Puff slab Having Density of 40 +- 2 KG/M3- Ante Room

Supply of Puff slab Having Density of 40 +- 2 KG/M3- Cold Chamber

Supply of Accessories , Mush Room Bolt M10X250,Anchor Fasteners 8X75, AL Pop Rivits , AL T suspension with Top and bottom loops , SD Screws, silicon sealant /Butyl sealant , PU chemicals

Supply of Flashings/Trims- complete , Flashings/Trims with 0.50 mm TCT PPGL , AZ 150, 300 MPA , SDP, RAL 9002 and U track with 1,20 mm TCT PPGL , AZ 150, 300 MPA , SDP, RAL 9002

Supply of Floor Insulation materials complete , Primer, Hot Bitumin, Polythene sheet ( Single Layer) and Tarfelt ( single Layer )

Erection of Coldwell Puf Panel , Coldwell Puff panel 60/120 mm for Wall/ceiling /Partion

Erection of Floor Insulation , Floor insulation with Puff Insulation materials

MATERIAL HANDLING Design, Supply, Erection, Testing and Commissioning of 10 Ton Traction Type Goods/Material Lift, complete with all necessary accessories as per the technical specifications. The lift serving G + M + 1 + M Floor (4 stops), with one-side entry at a rated speed of 0.25 m/s. Door- manual collapsible channel doors for car and landings- The car shall have MS powder-coated panels, light, fan, COP, 7-segment SS 304 landing operating panel and shall include MS checkered flooring with 8 mm heavy reinforcement. The drive shall be 25 HP (18.5 KW) with 16 mm wire ropes roped 4:1, complete with all safety features including emergency stop switch, door safety limit switch interlock, digital lift position indicators, buffer spring, pit and overhead safety, and OSG. The lift shall include main supply of 415–440 V, 50 Hz, 3-phase with double earthing and lighting supply of 230 V, 50 Hz single-phase. Shaft shall be RCC (brick wall not acceptable). Complete with ISI-mark electrical cables, heavy-duty DBG, guides for car rail and counterweight rail as specified. The scope includes all material, consumables and accessories for proper installation, testing and commissioning of the lift to make it fully functional.

HVAC Design, Detailing, Approval of Client, Supply, erection, Testing and commission of entire system for Refrigeration Equipments - CA Store. The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commissioning of the system as included in the the quoted rates. Reciprocating Ammonia Compressor set (2W + 1S) + Oil separator Assembly (2W + 1S) Compressor - High speed single stage multi cylinder reciprocating ammonia compressor, complete with Safety valve, Oil sight glass, Suction and Discharge valves, Driver accessories comprising of motor pulley, V-belts and belt guard, tools, wrenches & foundation bolts, gauge cum control panel, capacity control arrangement, ammonia head & oil cooling and skid mounting- Type - Reciprocating Compressor Suction Temperature - (-)10 deg C Condensing Temp. -35°C Capacity - 28.18 TR Power Consumed - 36.4BHP RPM - 1200 Make - FRICK INDIA/ Kirloskar/MYCOM N6L/ approved by Engineer iNcharge Oil Separator - oil separator - 10 flanged connections with companion flanges and oil drain valve- (2W+1S) Type - Coalescer type oil separator Connection - Flanged

Design, Detailing, Supply, erection, Testing and commission of entire system 50 HP Motors- TEFC (2W + 1S) Motors - For electric supply of 3ph x 415V x 50HZ, AC supply with slide rails for compressor- (2W+1S) Type - Squirrel Cage Induction Motor (TEFC- Totally Enclosed Fan Cooled) Power rating - 50 HP (approximately 75 kW) Poles - 6-pole (i.e., runs at approx. 960 RPM on 50 Hz supply) Efficiency class - |IE3 (High Efficiency) Protection Class - IP55 (dust protected and water jet resistant) Insulation Class - Class F Mounting type - IMB3 (foot mounted) Voltage & frequency - 3 Phase, 415V, 50 Hz AC supply Accessories - Supplied with slide rails - for mounting and belt tension adjustment with compressor

Design, Detailing, Supply, erection, Testing and commission of entire system VFD for above motors (2W + 1S) Variable Frequency Drive (VFD) - for the above motors (2W+1S) Make - ABB / Crompton Greaves (C.G) / Siemens/Danfoss/ approved by Engineer In Charge

Design, Detailing, Supply, erection, Testing and commission of entire system Evaporative Ammonia Condenser -81TR Evaporative Ammonia Condenser - Hot dip galvanized condensing coil, galvanized sump tank and casing Type - Evaporative type with galvanised construction Heat Rejection Capacity - 81 TR Condensing Temp. - 35 °C Wet bulb temp - 27.8 °C Accessories - Fan section with fans and motor, eliminators, water circulation pump (1 working + 1 standby), PVC fittings Make - Frick India / STAR COOLER/EVAPCO/BAC/ Emerson/DANFOSS/BITZER/CARRIER/BLUE STAR/ appr oved by Engineer incharge

Design, Detailing, Supply, erection, Testing and commission of entire system Ammonia receiver; size- 20"x12' long Туре - Horizontal Pressure Vessel Size - 20" diameter x 12 feet length Material - Heavy-duty carbon steel (assumed standard unless specified) Accessories - Liquid inlet & outlet valves, Safety valves, Charging Valves, Drain Valves, Purge valve, Pressure gauge, Gauge glass with isolation valves Make - FRICK INDIA/Metalex Cryogenics, Simtech Coil Company/ approved by the Engineer incharge

Design, Detailing, Supply, erection, Testing and commission of entire system PHE Chiller- 55 TR; SS316 plates with accumulator-30"x6' Type - Semi-welded Plate Type Heat Exchanger Material - SS 316 plates Flow Rate/Cooling Capacity - 55 TR Glycol Inlet Temperature - (-)4°C Glycol Outlet Temperature - (-)7°C Evaporating Temperature - (-)10°C Accessories - Complete with accumulator MAke - Alfa Laval/Kelvion/Equivalent approved by Engineer Incharge

Design, Detailing, Supply, erection, Testing and commission of entire system Glycol Chiller Controls Accessories - Liquid line solenoid Valve, Liquid level controller, Digital temperature indicator 2 point, Flow switch Make - Alfa Laval/Kelvion/Equivalent approved by Engineer Incharge

Design, Detailing, Supply, erection, Testing and commission of entire systemGlycol storage tank; Side Walls: 6 mm, Bottom: 8 mm; insulated by 2 Layers of 50 mm PUF- 10,000 litres Dual-compartment insulated glycol storage tank - Rectangular Glycol Tank (Hot well + Cold well) Tank Capacity - 10,000 litres Material - MS Plates as per IS 2062 Tank Thickness - Side Walls: 6 mm, Bottom: 8 mm Insulation - 2 Layers of 50 mm PUF Cladding - 26 gauge aluminum

Design, Detailing, Supply, erection, Testing and commission of entire system Glycol Primary Circulation Pump- 15m head Primary Glycol Pump - Circulates glycol through chiller (against 15 m head)- (1W + 1S) Motor - TEFC squirrel cage, VFD compatible Pump Set - Coupling, coupling guard, base frame, foundation bolts & pump housing Make - ABB or aproved by Engineer in Charge

Design, Detailing, Supply, erection, Testing and commission of entire system Glycol Secondary Pump- 25m head Secondary Glycol Pump - Circulates glycol to field coils (against 25 m head)- (1W + 1S) Motor - TEFC squirrel cage, VFD compatible Pump Set - Coupling, coupling guard, base frame, foundation bolts & pump housing Make - ABB or equivalent aproved by Engineer in Charge

Design, Detailing, Supply, erection, Testing and commission of entire system Air Cooling Units - for CA chambers- 11 nos For chamber (01- 11) Cooling Capacity - 15 TR Air cooling units - Wall-mounted / Ceiling-suspended Frigid Coil Air Cooling Units Material - Aluminium tubes with aluminium fins, GI enclosure Defrost System - Electric heater Accessories - Drain pan, fan with motor & electric heater Control for coils - 3 way Modulating valve - 1 no, Balancing valve- 1 no Non-Return Valve- 1 no, Digital Temp. Indicator cum controller- 1 no Heating tape - Heating tape for drainpipe with necessary accessories. Make - FRICK INDIA/Alfa Laval/ Guntner / Star Coolers/ Bufflow/ approved by Engineer Incharge

Design, Detailing, Supply, erection, Testing and commission of entire system Air Cooling Units - for Ante Room- 2 nos For Ante room Cooling Capacity - 8 TR Air cooling units - Wall-mounted / Ceiling-suspended Frigid Coil Air Cooling Units Material - Aluminium tubes with aluminium fins, GI enclosure Defrost System - Electric heater Accessories - Drain pan, fan with motor & electric heater Control for coils- 3 way Modulating valve - 1 no, Balancing valve- 1 no, Non-Return Valve- 1 no, Digital Temp. Indicator cum controller- 1 no Heating tape- Heating tape for drainpipe with necessary accessories Make - FRICK INDIA/Alfa Laval/ Guntner / Star Coolers/ Bufflow/ approved by Engineer Incharge

Design, Detailing, Supply, erection, Testing and commission of entire system MS C Class Pipes with valves & fittings- complete including painting of piping MS ‘C’ Class Piping – Glycol Circuit - MS ‘C’ class pipes, pipe fittings and valves for glycol circuit interconnection based on compact plant layout Material- Mild Steel (IS 1239 / IS 3589) MS ‘C’ Class & Ammonia Valves Piping - MS ‘C’ class pipes, pipe fittings and ammonia valves to interconnect equipment & compressors Material- Mild Steel (IS 1239) & ammonia service valves

Design, Detailing, Supply, erection, Testing and commission of entire system GI B Class Piping with valves & fittings - complete including painting of piping GI ‘B’ Class Piping – Condenser Circuit- GI ‘B’ class pipes, pipe fittings and valves for condenser water circulation, compressor jacket cooling, defrost drain & oil-cooler piping (assuming condenser within 7m) Material - Galvanized Iron

Design, Detailing, Supply, erection, Testing and commission of entire system PUF insulation with 26G AL cladding PUF insulation- PUF insulation with bitumen, fixing material and 26 G aluminum cladding for suction Line suction line and pressure vessel. Make - JINDAL/frick India/ RINAC/BNAL/SYNERGY / approved by Engineer Incharge

Design, Detailing, Supply, erection, Testing and commission of entire system Structural material for pipe installation & platform piping support Structural Steel for Piping Supports - Structural Material for pipe installation and plat form Piping support to be fabricated and installed at site with steel channel and steel angle with variance depend on the building condition. Material - Sail/tata/jindal/JSW/approved by Engineer in charge

Design, Detailing, Supply, erection, Testing and commission of entire systemCubicle-type MCC panel MCC Panel - Cubical type switchboard with ACB, bus bar, indicators, push buttons, switches, volt/ammeter, starters for fan motor, condenser pump, ammonia pump, and compressor feeder

Design, Detailing, Supply, erection, Testing and commission of entire systemCharging of initial (first) charge of Glycol, for commissioning the complete refrigeration system First Charge – Refrigerants & Oil -Glycol

Design, Detailing, Supply, erection, Testing and commission of entire system Charging of initial (first) charge of Ammonia Gas for commissioning the complete refrigeration system. First Charge – Refrigerants & Oil

Design, Detailing, Supply, erection, Testing and commission of entire system Manual Gas Purger Manual Gas purger - For purging non-condensable Gases from the system. Make- FRICK INDIA/Danfoss/ approved by Engineer in Charge

Design, Detailing, Supply, erection, Testing and commission of entire systemSupply, configuration, installation, and commissioning of PLC/SCADA system & Centralized Temp Controller & RH Monitoring and data logging with X-WEB suitable to connect with PC - PLC/SCADA - Computer, Printer, UPS Make - Seimens/Schneider/ABB/ approved by Engineer in charge Temperature Controller - 2 Air Sensor /1 RH Sensor / 1 Product Sensor Centralized

Design, Detailing, Supply, erection, Testing and commission of entire system Ammonia Gas leak detection system in machine room 4-Point Ammonia Gas Leak Detection System in machine room - Detectors, Alarm System, Interlock with compressor & ventilation fan Ammonia safety system - NH3 escape mask, Protective gloves, goggles, eye showers Make - Danfoss/Honeywell/approved by Engineer in charge

Design, Detailing, Approval of Client, Supply, Erection, Testing and Commissioning of entire system for Controlled Atmosphere (CA) Equipment complete with all accessories, electricals, fittings and consumables as per specifications, including all required items to ensure successful commissioning and proper functioning of the system CA Equipment and Accessories- complete CO₂ scrubber for Ultra Low Oxygen (ULO) Ventilator - Direct drive, frequency driven Scrub capacity 450 kg CO₂ per 24 hr at 3% CO₂, Voltage - 400 volt Current intensity - 5.0 A, Power consumption 2.6 kW, Plug connection -16 A, 5-pole, Sound level 78 dB at 1m, Make Bosa, RHD8/25/approved by Engineer in charge O₂ scrubber (injection)/N₂ generator suitable for ULO Blower Frequency-driven type, Vacuum pump Suitable for under/overpressure, Certification CE marking PVC work Suitable for under and overpressure, Modes Injection, Injection capacity (3% O2) 40 m3/hour, Injection capacity (1% O2) 28 m3/hour Voltage 400 volt, Current intensity 19.6 A Plug connection 32 A, 5-pole, Sound level 81 dB at 1m Control for coils $1325 case with PLC and text display Service interval Every 2,000 service hours Make Bravo 65 x 2/Equivalent approved by Engineer incharge Central Control System (PLC/SCADA) Central control system Expandable measurement and control system with central measurement cabinet (tower) Controller Programmable controller with relay card Gas analysis Integrated gas analysis equipment for O: and CO: monitoring User interface 17-inch touch-screen display for monitoring and control CA/ULO conditioning Automatic calibration of O: and CO: Gas measurement Checking gas conditions via measurement hoses Aeration Aeration via ventilators and compressed air (separate output) Na injection Na injection via separate output N: addition N: addition (injection mode) per cell, one by one Mode of operation Fully automatic control with manual measurement option Expandability Modular design allowing future system upgrades O-/CO: measurement prints Built into control cabinets; precision ±0.1% O: and ±0.2% CO2 O: measurement cell Galvanised type, to be replaced every 1-2 years CO: measurement cell Dual-wave infrared Calibration Span and zero settings Assembly On standard rail in control cabinet Temperature range 0-30°C Voltage 24 VDC Output signal 4-20 mA Inlet flow rate 0.25 L/min Air compressor for compressed air supply to pneumatic valves in scrubbers and cell valves Tank capacity - 100 litre, Motor rating - 1.5kW, Number of cylinders - 2 Operating pressure - 6-8 bar, Maximum pressure - 10bar speed - 850 r/min, Voltage - 400 VAC, Current -3.6A, Aspiration capacity - 220 L/min, Noise level - 72 dB at 1 metre Calibration gas cylinder with all accessories Composition 2.500% CO₂ in nitrogen, Cylinder pressure 200 bar, Cylinder volume 10 Litres, Valve Manually operated, Protective cap Suitable protective cap, Variance < 0.1% Certification Cylinder supplied with measurement certificate Cell measuring tap-complete Material PVC & metal, Diameter 8 mm, Application Manual sampling or connection to a manometer to test cell leakage, Application Manual sampling or connection to a manometer to test cell leakage Handheld O₂/CO₂ meter Handheld meter , O₂ range 0–25% O₂ repeatability 0.001, O₂ resolution 0.001, Typical O₂ cell life 2 years, O₂ response time 98% in 20 sec, CO₂ range 0–20%, CO₂ repeatability 0.001, CO₂ resolution 0.001, CO₂ response time 98% in 45 sec, Battery Rechargeable Ni-MH, 7 hrs between charges, Sample flow 0.7 L/min Digital manometer Product Type Differential pressure meter, Pressure range 0 – 100 hPa, Accuracy ± 0.03 hPa, Power 2 x AAA batteries, Switchable units hPa, mbar, Pa, mmH₂O, mmHg, psi, m/s, fpm, Material PVC, Diameter 50mm, Application Connection of thermometer and pressure testing of the rooms CCell bushing- complete Cell bushing with all accessories, Material PVC, Diameter 50mm Application Connection of thermometer and pressure testing of the rooms Flexible air buffer pack (3.0 m³)-complete Material PUR, Volume 3.0 m³, Suitable for Storage cells up to 600–800 m³, Material PVC, Model Underpressure/overpressure safety device, Connection 125 mm, Dimensioning Cell volumes up to 1,000 m³ Air pressure safeties-complete Material PVC Model Underpressure/overpressure safety device Connection 125 mm Dimensioning Cell volumes up to 1,000 m³ Storage cell ventilation storage cell ventilation Air inlet, fan, airtight under-pressure valve (only opens during ventilation), pipe to storage cell, Material Metal Capacity 290 m³/hour at 10 mm water column pressure, Connection 125 mm PVC pipe Electrical power 230 VAC

Gas tightening Material for CA Chamber- complete accessories including installation Complete materials including Installation