Kerala

Active

Works

Civil Works - Buildings

Annual Plan-FEROKE MUNICIPALITY PROJECT NO 65/2025-26-CONSTRUCTION OF SMART CLASSROOM IN GGVHS - General Civil Work

Local Self Government Department

FEROKE MUNICIPALITY | Kozhikode, Kerala

Amount: ₹4.2 LCloses: 12 Oct 2026Due today

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published5 Oct 2026
Closes12 Oct 2026
Bid Opening13 Oct 2026

Tender Value

₹4.2 L

EMD Value

₹10,588

Closing Date

12 Oct 2026, 6:00 pmDue today

Tender Inviting Organisation

Name

ASSISTANT ENGINEER FEROKE MUNICIPALITY

Address

AE LID EW FEROKE MUNICIPALITY

Work Description

CONSTRUCTION OF SMART CLASSROOM IN GGVHS

Tender Information

Tender ID

2026_LSGD_872898_3

Reference Number

AE/LID EW/FRK/2026-27/08

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Location

FEROKE MUNICIPALITY

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredREGISTRATION CERTIFICATE,PAN CARD, GST REGISTRATION CERTIFICATE (.pdf)

RequiredAFFIDAVIT, EPAY (.pdf)

RequiredFEE REMITTANCE, FORM OF TENDER (.pdf)

RequiredINTEGRITY PACT, PRELIMINARY AGREEMENT (.pdf)

RequiredNIT (.pdf)

RequiredSBD (.pdf)

Fee & Financial Details

Tender Fee Amount

₹935

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹10,588

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

5 Oct 2026

Published

5 Oct 2026

Bid Opening

13 Oct 2026

Download Starts

5 Oct 2026

Download Ends

12 Oct 2026

Submission Starts

5 Oct 2026

Bill of Quantities

Item RateBoQ_Ver3.0INR

BoQ1 (13 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Building Maintenance
1.001	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	59.59	sqm	-	-
1.002	13.26:Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.	202.9	sqm	-	-
1.003	12.31.1:Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) :Flat surfaces	16.5	sqm	-	-
1.004	50.6.4.2:Hollow block masonry using pre cast block (Factory made) of size 40x20x20 cm or nearest available size confirming to IS 2185 part 1 of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	0.56	cum	-	-
1.005	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	185.1	kg	-	-
1.006	21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)	100.8	kg	-	-
1.007	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	37.92	sqm	-	-
1.008	15.13.2:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area beyond 3 sq. metres	1	each	-	-
1.009	10.14.1.1:Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile BFixing with adjustable lugs with split end tail to each jamb	6.35	metre	-	-

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.28 MB

Work Item Documents

BOQ_1480797.xls

BOQ • 0.31 MB

NIT.pdf

Tender Documents • 0.03 MB

EPAY.pdf

Tender Documents • 0.23 MB

FEE.pdf

Tender Documents • 0.34 MB

FOT.pdf

Tender Documents • 0.25 MB

IP.pdf

Tender Documents • 0.23 MB

PG.pdf

Tender Documents • 0.25 MB

SBD.pdf

Tender Documents • 1.77 MB

AFF.pdf

Tender Documents • 0.24 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Building Maintenance
1.001	13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)	59.59	sqm	-	-
1.002	13.26:Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.	202.9	sqm	-	-
1.003	12.31.1:Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) :Flat surfaces	16.5	sqm	-	-
1.004	50.6.4.2:Hollow block masonry using pre cast block (Factory made) of size 40x20x20 cm or nearest available size confirming to IS 2185 part 1 of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete	0.56	cum	-	-
1.005	21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)	185.1	kg	-	-
1.006	21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)	100.8	kg	-	-
1.007	21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)	37.92	sqm	-	-
1.008	15.13.2:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area beyond 3 sq. metres	1	each	-	-
1.009	10.14.1.1:Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile BFixing with adjustable lugs with split end tail to each jamb	6.35	metre	-	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Building Maintenance

1.001

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

59.59

sqm

1.002

13.26:Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

202.9

sqm

1.003

12.31.1:Providing 10 mm thick plaster of Paris (gypsum anhydrous) ceiling up to a height of 5 m above floor level, over first class kail wood strips 25x6 mm with 10 mm gap in between and reinforced with rabbit wire mesh fixed to wooden frame (frame work to be paid separately) :Flat surfaces

16.5

sqm

1.004

50.6.4.2:Hollow block masonry using pre cast block (Factory made) of size 40x20x20 cm or nearest available size confirming to IS 2185 part 1 of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

0.56

cum

1.005

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

185.1

1.006

21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

100.8

1.007

21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)

37.92

sqm

1.008

15.13.2:Taking out doors, windows and clerestory window shutters (steel or wood ) including stacking within 50 metres lead:Of area beyond 3 sq. metres

each

1.009

10.14.1.1:Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm pressed, mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile BFixing with adjustable lugs with split end tail to each jamb

6.35

metre