Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹24.6 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹26.9 L+₹2.3 L (9.51%)Rejected-AOC KATTUPADATH H AZHEEKAL PO VYPEEN 682508 | KOCHI | ERNAKULAM | KERALA | 682508 | L2 | Rejected-AOC Rejected |
Tender Value
Refer Docs
EMD Value
₹62,000
Closing Date
5 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri DC Sharma IDSE CWE (NW) KOCHI
CWE (NW) KOCHI
ADDN/ALTN OF CLASSROOM NO 8 INTO TWO TOILETS FOR WOMEN SAILORS AND TRAINEE OFFICERS AT SFNA AND PROVN OF RCC PLATFORM, ELETRICAL FITTING AND ASSOCIATED FACILITIES AT INS GARUDA, NAVAL BASE KOCHI
2022_MES_565490_1
CWE(NW) KOCHI/81328
Open Tender
Civil Works
Item Rate
180 days
KOCHI
As per NIT
6 documents required · 6 mandatory
₹500
GE (NW) KOCHI
₹62,000
Yes
28 Jan 2023
26 Nov 2022
7 Jan 2023
26 Nov 2022
5 Jan 2023
17 Dec 2022
Amount
Dismantling Brick/block or stone masonry in cement mortar or lime mortar complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings in n exc 15cm thickness (below or above ground level) complete all as specified and directed .
Dismantling of Wall or ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc , keep in safe custody for reuse complete all as specified and as directed .
Taking down chowkats with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm but not exceeding 4 Sqm complete all as specified and as directed .
Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation in soft/loose soil complete all as specified and as directed.
Returning/filling in layers and ramming in layers around pile cap,plinth beam etc using excavated soil incl sprading, levelling, well ramming in layers not less than 25cm thick. Complete all as specified and as directed.
Removing excavated material exc 1.5Km n.exc 5Km and depositing where directed at a level n.exc 1.5m above starting point complete all as specifed and as directed.
M&L For plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and as directed .
M&L PCC 1:2:4 Type B0 using 12.50mm graded aggregate as in DPC complete all as specified and as directed.
M&L for RCC M 30 Design mix using 20mm graded aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed .
M&L for RCC M 30 design mix using 20mm graded aggregate for Columns, piers, pillars and struts complete all as specified and as directed .
M&L for RCC M30 design mix using 20mm graded aggregate for beams, cantlivers, lintels etc complete all as specified and as directed .
M&L for RCC M 30 design mix using 20mm graded aggregate for roof slab/shelves/slab complete all as specified and as directed .
Use and waste of form work to to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter flat fair finshed surfaces complete all as specified and as directed .
Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. flat fair finished surfaces complete all as specified and as directed .
Use and waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchionsrectangular fair finished surfaces complete all as specified and as directed .
Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick for flat fair finished surfaces of concrete (Horizontal or sloping) complete all as specified and as directed .
M&L for TMT bars in reinforcement 10mm dia and over including cut to length , bend to required shape , cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and as directed .
M&L for TMT bars 5mm dia and over and including 10mm dia in stirrups, spacers and binders etc , cut to length, bent to shape required, including cranking bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed
M&L for TMT bars in reinforcement 6 to 8mm dia and over including cut to length , bend to required shape , cranking/hooking ends if necessary and binding with 0.9mm dia MS wire annealed or welding so as to secure the bar firmly in position/required shape complete all as specified and as directed.
M&L for hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thickness watered and rammed to a true surface Complete all as specified and as directed .
M&L providing 100mm thick plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in floors to receive top layer complete all as specified and as directed .
M&L for ATT for treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.
M& L for ATT for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured)
M& L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, Type C1, 1:3:6 (using 20mm graded stone aggregate), complete all as specified and as directed .
M& L for 10mmm thick cement plaster in CM 1:6 on fair surfaces of brick work or concrete surfaces of wall, finished even and smooth without using extra cement all as specified and directed.
M&L for rendering 8mm thick cement plaster in CM 1:4 with wpc @3% by weight finished even and smooth without using extra cement over 12mm thick back coat on brick or concret wall surfaces with cement mortar (1:6) complete all as specified and as directed . Note : WPC shall be meashured and paid seperately.
M & L for 5 mm thick rendering in cement mortar 1:3 on fair faces of of ceiling surfaces finished even and smooth complete all as specified and as directed .
Supply only Integral waterproofing compound complete all as specified and as directed .
M&L for preparation new plastered external wall surfaces and apply one coat of primer over exterior sealant base coat and allowed to dry overnight before applying first coat of wethaer proof (anti fungal paint) complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .
M&L for application of first coat of weather proof paint (anti fungal paint) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac )on primed wall surface using spray application or mechanical means, to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of acrylic exterior emulsion paint complete all as specified and as directed.
M&L for application of second coat of weather proof paint (anti fungal paint) ( Asian paint apex ultima protek or equivalent of Berger /Nerolac ) over first coat on wall surface using spray application or mechanical means, to get a smooth and tint free surface complete all as specified and as directed.
M & L for preparation of new wall surfaces and applying three coats of white wash complete all as specified and as directed .
M & L for preparation of old wall surfaces and applying three coats of white wash complete all as specified and as directed .
M&L for preparation of new decorated surfaces of ceiling and applying three coat of white wash complete all as specified and as directed .
Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick square/rectangular area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including provision of CM screed 10 mm thick in CM (1:4) all as specified and directed.
M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including provision of backing coat 10 mm thick in CM (1:4) complete all as specified.
Supply and fix PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including MS brackets 10 Ltrs capacity including flush pipe PVC connections etc complete all as specified and as directed .
Supply and fix vitreous China wash down water closet (pedestal pattern) white (including fixing bolts) including trap set in and including concrete and connection to drain and flush pipe.
S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)
S&F of Vitreous china urinal partition white of size 310x700 mm. complete all as specified and as directed.
S&F of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and as directed .
S&F of PVC (SWR) pipes, single socketed, in any length, with rubber rings 110mm dia complete all as specified and as directed .
Supply and fix in repairs vitreous China wash hand basin of size 580 x 450 mm white, flat back with and including waste fittings brass chromium plated 32 mm with long and fly nut screwed shank excluding taps, waste chain and plug and porcelain stopper but including cast iron brackets complete all as specified and as directed .
Supply and fix pillar taps fancy type cast copper alloys, with capstan heads fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe suitable for 15 mm bore pipe complete all as specified and as directed.
M & L Precast cement concrete cover slab type B-1, 1:2:4 using 20mm graded aggregate and set in cement mortar 1:6 complete all as specified and as directed . Note: Reinforcement shall be measured and paid seperately
S&F for powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.
S&F for powder coaed Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed .
S&F powder coated anodised aluminium window and ventilator shutter powder coated side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1no.) complete all as specified and as directed .
S&F aluminium powder coated dark coloured deco grill 75 mm aperture, made out of 7.5 mm plate and finished deco grill will have 7.5 mm width and 6 mm thick with rubber beading & looks etc complete all as specified and as directed .
S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed .
S&F Factory Made Solid PVC Moulded Door Shutter,with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing
Supply and fix stainless steel butt hinges medium weight size 100mm size complete all as specified and as directed
Supply and fix aluminium anodised barrel tower bolt extruded section of 150 mm long complete all as specified.
Supply and fix extruded aluminium alloy handles fabricated type anodised 150 mm size complete all as specified and as directed .
Supply and fix 250mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed .
S&F 5mm thick frosted glass one side frosted ordinary quality and glazing with oil putty in square n exc 0.50 sqm in each plane complete all as specifed and as directed
S&F 9 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber frame work complete all as specified and as directed .
S&F of Anodized aluminium snap grid frame work for false ceiling all as specified including GI hangers 6mm dia (upto 1.50m length) adjesting level fixed to roof by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fastners 12.50mm dia 40mm long complete all as specified and directed.
S&F 4mm thick non asbestos fiber cement building boards fixed or laid /inserted to timber/GI/Aluminium framework with screws fixed to ceiling fram all as specified and directed.
S&F of Alu anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed .
S&F of Toilet paper holder, vitreous China, box type fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed .
S&F of Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed .
M&L Reinforced cement concrete pipe 150mm bore class NP2 laid and jointed complete with collars complete all as specified and as directed ..
M&L concrete bed to 150mm drain pipe with cement concrete 1:3:6 type C2 incl packing under and completely surrounding pipes with concrete after they are laid and tested complete all as specified and as directed .
S&F RCC Hume pipe septic tank for 50 users designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete all as shown in Drg no. TD/A/57 sheet no. 1/1 complete all as specified and as directed .
S&F Soakage pit of 50 User as shown on drg No.TD/99/47 sht No.1/1. complete all as specified and as directed .
M&L PCC 1:2:4 type B2 (20mm graded aggregate) for haunching inside the manhole complete all as specified and as directed .
Excavating over areas, n exc 1.5 m deep and getting out in soft / loose soil complete all as specified and as directed .
Framed work for water tank platform (Fe 410 -W (Gde- E- 250) quality- AFe-) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and as directed.
M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth not otherwise described with two coat of synthetic enamel paint over a coat red oxide complete all as specified.
M&L for plain cement concrete type C1, 1:3:6 (20mm graded stone agg) 75 mm thick as in plinth protection and finished the surface even and fair without using extra cement complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and directed .
Material and labour reinforced cement concrete for suspended slab, basement slabs,etc Type B1, 1:2:4 using 20mm graded aggregate complete all as specified and as directed.
Complete removal of existing treatment from internal and external wall surface complete all as specified and as directed .
M&L preparation of new plastered surfaces of wall (plastered or unplastered) including cornices and applying two coat of distember oil emulsion over a coat of primer complete all as specified and as directed .
M&L preparation of old plastered surfaces of wall (plastered or unplastered) including cornices and applying two coat of distember oil emulsion over a coat of primer complete all as specified and as directed .
M&L preperation of new decorated surfaces of walls (plastered or unplastered) including cornices and applying two coat of cement base paint over a coat of priming complete all as specified and as directed by Engr-in-Charge.
M&L preperation of old decorated surfaces of walls (plastered or unplastered) including cornices and applying two coat of cement base paint over a coat of priming complete all as specified and as directed .
S&F Steel rolling shutters, (lath thickness 1.25mm) with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle complete all as specified and as directed.
S&F for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S&F for pre painted plain sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding, fixed with screws all as specified and directed.
S &F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming tofe -410W (gd E-250) quality A complete all as specified and as directed .
Excavation in post holes (or similar holes) each n.exe 0.5 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm watering in soft/loose soil all as specified and as directed .
M & L Cement concrete in post holes foundation fillings and mass concreting PCC1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and as directed .
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Soft /loose soil complete all as specified and as directed
S&F 11 to 15 mm dia MS bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 22.5 cm and n exc 30 cm.
Internal Electrification: M&L , point wiring using approved colour coding as per IS (Red, Black and Green for single phase circuits) with 1.5 sqmm nominal cross sectional area, copper conductor unsheathed FRLS cable 1100 Volts grade ISI-694 marked with valid CML No. single core multi stranded cable in and including medium grade concealed PVC conduit not less than 20mm dia on wall / roof except beam, column and RCC roof including chases cutting and accessories ISI marked with valid CML No (IS-9573-1983 for conduits and IS: 3419: 1976 for conduit accessories) and including 1.6 mm thick MS sheet/ pressed steel sunken boxes depth not less than 50mm (earth dolly) duly painted with two coats of anti corrosive paint / aluminium paint over a coat of red oxide primer internally and two coats of black bituminous paints over a coat of red oxide primer externally covered with 3 mm thick plastic laminated sheet cover for fixing of switches sockets and fan regulators etc. including 1.5 Sqmm nominal cross sectional area PVC insulated copper conductor unsheathed FRLS cable single core multi stranded cable as earth continuity wire all as specified and as directed for One light point controlled by one switch/one fan point controlled by one switch and regulator
All as per item No. 89 of above but One 5 pin 5 Amps Socket point controlled by one switch on same board complete all as specified and as directed .
All as per item No. 89 of above but One 5 pin 5 Amps socket point controlled by one switch on independent board complete all as specified and as directed .
All as per item No. 89 of above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable as earth wire for one 6 Pin 16 Amps Socket outlet on independent board complete all as specified and as directed .
All as per item No. 89 of above but with 4 Sqmm copper conductor including 4.0 Sqmm copper cable on earth wire for sheet metal enclosure for AC point complete all as specified and as directed .
S&F switch piano flush type 5A one way complete all as specified and as directed .
S&F switch piano flush type 15 A one way complete all as specified and as directed .
S&F Socket 5 pin 5 Amps flush type complete all as specified and as directed .
S&F Socket 3 pin 15 Amps flush type complete all as specified and as directed .
S & F Power Unit 25 Amp modular type for AC complete all as specified and as directed .Make Havells Cat Part No AHOO002504 or equivalent make in list of manufactures
S & F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body complete all as specified and as directed .
S & F On load change over switch as open execution 100 A,415V,AC 23 A,4P & Type CO1-100 Cat Ref No CO10630OOOO of M/s L & T or equivalent in M/s Havells/ M/s Schneider as in replacement/ repairs complete all as specified and directed
Supply & fix Regal Batten for LED tube lights, both side connection type and with ISI marked, medium grade LED tube rod 1 x 20 Watt, both side connection (LED tube rod shall be not less than 100 Lumen/Watt) all as specified and as directed. Make of batten : Havells Cat Part No. Regal batten 8UPT001X22WSSBSWH / Crompton Cat Part No. IGP131LT8-16 / Philips Cat Part No. TMC501P1XTLED22WP3241 Make of tube rod : Havells Cat Part No. Crystal 1213T8DSTL20W LED 865 GLASS / Crompton Cat Part No. LG-T8-20-865-2 / Philips Cat Part No. Essential LED tube 1200mm 20W865T865T81ND-1
S&F wall mounted air circulators metallic body, 400 mm sweep, 1440 rpm with fixing arrangements on wall including screws, rawal plugs etc. connetcing to the electrical system all as specified and directed. Make: Havells Cat Part No. D'zire or V-Gurad/Almonard
S&F Sheet metal enclosure Vertical TPN for DB's when MCCB's to be used 8 way with 300 amps bus bar double door IP 43 metal door complete all as specified and as directed.Make Legrand cat No DBVTL008DD / Legrand / ABB
S&F Sheet metal enclosure Vertical TPN for DB's when MCCB's to be used 6 way with 150 amps bus bar double door IP 43 metal door complete all as specified and as directed.Make Legrand cat No DBVTL006DD / Legrand / ABB
S&F MCCB 3 pole, 415 Volt fixed type 100 Amps with breaking capacity 16 KA complete all as specified and directed.
S&F MCB 4 pole, 415 Volt fixed type 32 Amps with breaking capacity 10 KA with enclosure complete all as specified and directed. Cat Part No. AU15S41003C of L&T or Schneider/Legrand
S&F Triple pole and earth encolsure with a three pin and earth plug with socket complete with one three pole MCB 63 Amps complete all as specified and directed.
S&F MCCB 4 pole, 415 Volt fixed type 200 Amps with breaking capacity 36 KA complete all as specified and directed.
S&F MCB 'B' Curve 40 Amp SPN ,240 Volts,10KA all as specified and directed. Make L&T Cat Part No. BB20400B or Schneider Cat Part No. A9NIP40B/ Legrand Cat Part No. 408618
S&F MCB 'B' Curve SP 6 To 32 Amp , 240 Volts,10KA all as specified and directed. Make Schneider Cat Part No. A9N1P06B to A9N1P32B, or L&T Cat Part No. BB10060B to BB10320B / Legrand Cat Part No. 408587-408596
M/L submain wiring with 4 single core 6 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn throgh and including PVC rigid conduit concealed wiring inculding necessary PVC conduit specials including chases cutting complete exceapt beam and RCC roof and one run of 6 Sqmm PVC insulated unshearthed single core 1100 volts grade multistranded copper conductor cable as earth continuity condutor and connceting with suitable size thimble complete all as specified and as directed. Note: two run of 6 sqmm size PVC cable , one run of 6 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length
All as per item No 111 but 4 single core 16 Sqmm with 16 Sqmm earth wire complete all as specified and as directed .
Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, buried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connected with galvanised strip of size 32 x 6 mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm c/c both ways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion all as specified including taking down of old item and as directed.”
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sheet metal encl. with plug & socket etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
Taking down existing tube light fittings/ ceiling fittings/ mirror light fittings of any type & make and keep in safe custody for re-use or taking credit all as specified and directed.
S & F for LED Mirror light fitting 8 watt with connected accessories complete all as specified & directed. Make :Polycab Cat Part No. LD00103040 or Crompton Cat No. LDL-10-WW, Luker Cat Part No. LTSM10 Note: Luminary efficiency of LED tube rod shall be not less than 100 Lumen/Watt
S&F 250mm sweep, PVC body exhaust fan heavy duty, single phase 230 Volts, all as specified & directed including taking down old existing unserviceable fans. Make: Havells Cat Part No. Ventil Air-DX white or Bajaj/ Crompton
S&F SPN sheet metal enclosure for DB 4 ways Double door complete all as specified and as directed .
S&F MCB 'B' Curve 32 Amp double pole ,240 Volts all as specified and directed. Make L&T Cat Part No. BB20032B or Schneider Cat Part No. A9NIP40B/ Legrand Cat Part No. 408619
M/L submain wiring with 2 single core 4 Sqmm PVC insulated unsheathed multistranded copper conductor cable 1100 volt grade drawn throgh and including PVC rigid conduit concealed wiring inculding necessary PVC conduit specials including chases cutting complete exceapt beam and RCC roof and one run of 4Sqmm PVC insulated unshearthed single core 1100 volts grade multistranded copper conductor cable as earth continuity conduto9r and connceting with suitable size thimble complete allas specified and as directed. Note: two run of 4 sqmm size PVC cable , one run of 4 Sqmm size PVC cable as earth wire and one run of PVC conduit shall be measured as one unit length
Internal water supply: Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 25 mm dia complete all as specified and directed. Make: Supreme/Eurotech /Astral/SFMC
Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 20 mm dia complete all as specified and directed. Make: Supreme/Eurotech /Astral/SFMC
S/F CPVC Ball Valve of size 25 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC
Supply and fixing 15mm angle valve,quater turn with flange, with flange type chromium plated for fixing with CPVC pipe complete specified and as directed .(Make : Model No: F2004201 of Cera / Jaguar/ hindware)
Supply and fixing two way angle cock with flange 15 mm, chromium plated for fixing with CPVC pipe complete specified and as directed .(Make : Model No: F2004211 of Cera / Jaguar/ hindware)
Supply and fixing health faucet ABS body with wall hook and 1 metre SS braided rubber hose pipe ,all as per specified and directed (Make : Model No: F8030102 of Cera /hindware/Jaguar).
Supply and fixing CP angle cock, self closers/ pressmatic with wall flange for urinal pots to fixed in 20/15mm pipe, complete all as specified and directed . (Model No F9020203 of CERA /Hindware/ Jaguar
Supply and fixing PVC connection pipe 16mm dia (outer 450mm long cold water complete with brass union on both sides to suit 15mm pipe complete all as specified and directed.
Supply and fixing of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 1000 liters including inlet, outlet, overflow, washout & air pipe connections complete all as specified and as directed .. Make : Sintex (ISI)/ Aquatech
Supply and fix on wall/concealed on wall high pressure CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings including all necessay fittings, solvents of size 40 mm dia complete all as specified and directed. Make: Supreme/Eurotech /Astral/SFMC
S/F CPVC Ball Valve of size 40 mm dia suitable for CPVC pipe incl necessary fittings complete all specified and directed. Make: Supreme/Eurotech /Astral/SFMC
Supply and fixing in replacement of Rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) hoisted & fixed in position of capacity 5000 liters including inlet, outlet, over flow wash out and Air pipe conncetions. Make : Sintex (ISI)/ Aquatech
S/F float valve synthetic(PVC) of size 40 mm dia high pressure with polythene ball of size 6" dia and flynut complete all as specified and directed.
External electrification:- supply and lay UG cable in trenches/apssing through pipes /fixed on walls oe poles cable XLPE insulated PVC bedded,steel strip or wire armoured electric power cables (heavy duty) 1100 V grade with stranded aluminium conductor of size 3.5 core 50 Sqmm with suitable cable gland all as specified and as directed.
supply and lay UG cable in trenches/apssing through pipes /fixed on walls oe poles cable XLPE insulated PVC bedded,steel strip or wire armoured electric power cables (heavy duty) 1100 V grade with stranded aluminium conductor of size 4 core 16 Sqmm with suitable cable gland all as specified and as directed.
S&F 4 pole microprocessor MCCB ,125A 50Hz 415V with repturing capacity 35KA with enclosures complete all as specified and as directed .
S&F 4 pole microprocessor MCCB, 63A 50Hz 415V with repturing capacity 35KA with enclosures complete all as specified and as directed .
M&L for sand cushioning and covering of UG cables in trenches complete all as specified and as directed . (Note : For measurement purpose only punned thickness shall be measured and paid )
Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1, flat size 250 mm x 150 mm x 40 mm. laid in trenches for protection of cable all as specified.
Supply and fixing GI pipe light grade with necessary fittings in floor/pillar/fixed on pole of size 50mm dia complete all as specified and as directed.
Cutting existing road/hardstanding of any type by using crow bar chisel upto a depth of 30cm for laying GI pipe including making good the surafce by returning filling watering ramming in layers 150mm thick PCC 1:2:4 over 200mm thick hard core of broken bricks/stones over returing filling watering ramming in layers not exceeding 25cm thick complete all as specified and as directed.
MS BUILDERS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .