AME for preparation of Small Ornamental Designs during fairs & festivals and Srivari Brahmotsavams at AE-II section in ESD-II, Tirupati for the year 2026-27(Part-B)

Fabrication Charges for preparing ornamental designs with given 6mm / 8 mm / 10 mm Steel duly cutting, bending and welding as per the Drawing drawn on the floor & welding shall be done on the sides of design. Note:-1.Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost. 3. Welding rods will be supplied by department all yat free of cost. 4. The above rates excluding GST

Fabrication charges for providing necessary back support with 8mm/ 10mm / 12mm steel to the design/Cut out duly cutting, bending and welding as directed during execution. Welding shall be done on both sides of design. Note:-1.Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost. 3.Welding rods will be supplied by department all yat free of cost. 4. The above rates excluding GST

Charges for drawing of figures of Deities, Arches, Various designs through an Artist as directed during execution. Note:-1.Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost. 3. Welding rods will be supplied by department all yat free of cost. 4. The above rates excluding GST

Only Labour charges for painting the Ornamental designs, cut outs fabricated with steel (Red oxide and Enamel paint will be supplied by departmentally). Note:-1.The rate including the cost of Red Oxide and Enamel paint. 2. The above rate excluding GST

Supply of Man Mazdoor (Unskilled Work Men)

Supply of Red Oxide paint

Supply of Enamel paint

Supply of 6 mm M.S.Steetl

Supply of 8 mm M.S.Steel

Supply of Welding electrodes 4mm dia

(Rupees Six Lakh Twelve Thousand Nine Hundred Fifty Six and Paise Eighty only)

Fabrication Charges for preparing ornamental designs with given 6mm / 8 mm / 10 mm Steel duly cutting, bending and welding as per the Drawing drawn on the floor & welding shall be done on the sides of design. Note:- 1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost. 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Fabrication charges for providing necessary back support with 8mm / 10mm / 12mm steel to the design/Cut out duly cutting, bending and welding as directed during execution. Welding shall be done on both sides of design. Note:- 1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost. 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Charges for drawing of figures of Deities, Arches, Various designs through an Artist as directed during execution. Note:- 1. Welding Machine Should be Provided by the Fabricator at his own cost. 2. Necessary power supply will be given by Department at free of cost 3. Welding rods will be supplied by departmentally at free of cost. 4. The above rates excluding GST

Only Labour charges for painting the Ornamental designs, cut outs fabricated with steel (Red oxide and Enamel paint will be supplied by departmentally).Note:-1. The rate including the cost of Red Oxide and Enamel paint2. The above rate excluding GST

Supply and run of 1 wire of 14/0.3mm (1.0 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS Pipe / PVC trunking for earth Continuity / mains including labour charges etc., complete Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 1 wire of 36/0.3mm (2.5 Sq mm) PVC insulated flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS Pipe / PVC truking for earth Continuity / mains including labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Supply and run of 1 wire of 56/0.3mm (4.0 Sq mm) PVC unsheathed flexible FRLS copper cable as per IS:694 / 1990 specification in the existing PVC pipe / MS Pipe / PVC truking for earth Continuity / mains including labour charges etc., complete. Grade-A: Makes: Finolex / RRKabel / Havells / Polycab / L&T / KEI

Man Mazdoor - Unskilled Workmen

Supply of Welding electrodes 4 mm dia

Supply of Red Oxide Primer Paint for iron works of Grade -1

Supply of ready mixed Synthetic Enamel paints in all shades Grade - I having VOC (Volatile Organic Compound ) content less than 50 grams/ liter.

Supply of 6mm / 8 mm M.S.Steel

Supply of High yield strength deformed (HYSD) steel bars 8mm dia EE 415 of approved make; i.e Vizag steel, Tata, Sail & JSW etc., as per IS 1786-2008 including loading and unloading and cost and conveyance of all taxes other incidental charges etc.

Supply of PVC Cloth paper of White Colour

Supply of copper wire suitable for LEDs connection purpose.

(Rupees One Lakh Eighty One Thousand Nine Hundred Eighty Three and Paise Thirty Eight only)