Loading
Loading…
Loading…
Tender Value
₹4.2 L
EMD Value
₹8,335
Closing Date
2 Sept 2026, 11:00 am
Executive Engineer
Jal Shakti Division Kangra
C/O Wire crate work to protect the Gravity Main150mm Dia in Manooni Khad). UNDER PDNA .
2026_HPIPH_141788_1
EE/JSDK/EA-I/Tender/2026- 5178-5227 Dt.22-08-2026
Open Tender
Civil Works
Item Rate
90 days
Kangra
Please refer Tender documents.
6 documents required · 6 mandatory
₹350
₹8,335
22 Aug 2026
22 Aug 2026
2 Sept 2026
22 Aug 2026
2 Sept 2026
22 Aug 2026
22 Aug 2026 - 2 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in earth work and banking in 20cm. layers including breaking clods, ramming and dressing ground for the purpose of making embankment or filling up ground depressions upto a lead of 20 metres and lift upto 1.50 metres complete in all respect including all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge. | 35 | Cum | - | - |
| 2 | Wire crates made of G.I. wire mesh filled with boulders with square cut face against the wire (boulder filling to be measured and paid for seprately) G.I. wire 5mm thick corresponding to SWG-6 (15cmx15Cm mesh) complete in all respect including all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge. | 450 | Sqm. | - | - |
| 3 | Wire crates made of G.I. wire filled with boulders with square cut faces against the wire (wire crates to be measured and paid for seperately) complete in all respect including all leads and lifts as per the direction and to the entire satisfaction of Engineer-in-Charge. | 93.75 | Cum | - | - |
| 4Dismentalling of galvanised mild steel tube butt welded pipe from trenches of following Diameter (cost of excavation is to be measured and paid for separately) complete in all respect and to the entire satisfaction of the Engineer-in-Charge. | |||||
| 4.01 | 150mm dia (M) | 100 | Rmts | - | - |
| 5Relaying, jointing & testing of GMS (plan ended pipe) with 100% circumfrential butt welded joints by electrical arc welding with minimum two layers capable to withstand required test pressure (minimum welding thickness shall be equal to pipe wall thickness) including manufacturing and fabrication of reducers/ tapers, all short pieces, bends of required degree as per site requirement made from parent tubes. dully welded in three layers (two for outer & one on inner side) and all other operation such as cutting, cleaning, welding, jointing, fabrication of bends, tees etc, lowering and laying in excavated trench to ensure required level i/c flushing, cleaning, and hydraulic testing complete in all respect including all leads and lifts as per the direction and to the entire satisfaction of Engineer-In-Charge. | |||||
| 5.01 | 150mm dia (M) | 100 | Rmts. | - | - |
| 6Repair of leakage points by welding of pipes, Carraige of welding set and generator, straightening and re-alinment of pipe in position including excavation as per relevant codes and specifications at site of following dia including digging pits of 0.60x0.55x0.90 mtr size at leakage points complete in all respect. | |||||
| 6.01 | 150mm dia | 34 | Points | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.24 MB
Form6and8.pdf
Tender Documents • 0.71 MB
termandconditions.pdf
Tender Documents • 0.21 MB
BOQ_210459.xls
BOQ • 0.25 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].