REPAIRS TO DRAIN FENCING COMPOUND WALL AND GATE IN POCKETS 1 TO 4 IN THE AREA AGE BR I UNDER GE ROORKEE

Amount

Dismantling RCC fencing posts/ struts imbedded in PCC including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling mild steel / structural steel work as in gates or posts of any description complete all as specified and directed.

Excavating in post holes in soft /loose soil each n.exc 0.5 cum, getting out and returning filling in and ramming around concrete foundation and the like, including removing surplus soil to a distance n.exc 50 m where directed complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for precast RCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in fencing posts, struts etc for fencing, average sectional areas exc 100 but n.exc 250 Sqcm, rounded or mitred tops and fixed in position complete all as specified and directed.

Demolition of RCC of any description including cutting reinforcement to facilitate demolition (if required) as in drain/manhole covers and the like, fixed in any mortar complete all as specified and directed.

M&L for precast RCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in drain/manhole covers including necessary form work, set in position in cement mortar (1:4) complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L mild steel TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L mild steel TMT bars 6 mm dia and over upto and including 10mm dia bras, cut to length, bent to shape, cranking, bending spirally for hooping for columns, stirrups, binders etc, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.

Dismantling galvanized barbed fencing wire of any type and description complete all as specified and directed.

S&F Galvanised 2 strand steel barbed wire 2.24 mm dia with 2 mm dia barbs at 75 mm spacing and fixing and tying at crossing with and including galvanised wire staples or steel pins complete all as specified and directed.

Fixing only chain link fencing in repairs including line wire of any mesh size and type, fixed to any type of standard rails, straining bolts, including dismantling of old chain link fencing of any descrition complete all as specified and directed.

Supply only galvanisd mild steel wire chain link fencing of any mesh size or type complete all as specified and directed.

S&F mild steel 10 mm dia round bars, cut to length, bent to shape for tying/ tightening of chain link fencing with and including galvanized mild steel binding wire complete all as specified and directed.

S&F mild steel work as in fencing posts/struts and the like including cutting, notching, drilling holes, for wire, welding flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed.

S&F mild steel machine made screw bolts of 11 to 15 mm dia with hexagonal or square head at one end and screwed at other end or ecrewed at both ends, each screwed end to be fitted with washer and one hexagonal or square nut, length of bolt exc 5 cm but n.exc 10 cm complete all as specified and directed.

S&F mild steel framed work as in doors or gates of ornamental and intricate design, conforming to Fe 290, Gde E-165, with gusset plates, rails braces etc, drilled for fixing of steel sheeting or other covering and hanging as in gates including pintle hinges, stops, hand made sliding bolts etc complete all as specified and directed.

S&F mild steel work as in hold fasts, bands supports, clamps, wall ties, hooks including nut and bolts, hand made sliding door bolts and similar small articles etc conforming to Fe 290, Gde E-165 including welding etc as required complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-0, (using 12.5mm graded stone aggregate) as cills, copings, bed blocks for inserting hold fast and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for preparing new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparing old painted steel and iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Demolition of brick work or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facing, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks in cement mortar (1:4) in half brick thick walls, straight or curved on plan to any radius complete all as specified and directed.

M&L for brick work with old size sub class 'B' bricks in cement mortar (1:4), straight or curved on plan exc 6 m mean radius complete all as specified and directed.

M&L for brick work (except bricks) with old bricks retrieved from demolition in cement mortar (1:4), straight or curved on plan exc 6 m mean radius complete all as specified and directed.

Taking down cement or cement lime plaster on brick walls or concrete surfaces including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and fair complete all as specified and directed.

M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for preparing old decorated plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channel & drains complete all as specified and directed.

Extra for fair finishing to cement concrete channels & drains using extra cement including all necessary forms, moulds etc for 30 cm inner girth complete all as specified and directed.

S&F in repairs, 110 mm dia bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in floors / trenches complete all as specified and directed.

S&F in repairs, 75 mm dia bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in floors or fixed to wall including necessary clamps etc complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

M&L for 35mm thick Precast RCC Jallies built in RCC (1:2:4) type B-0 (12.5 mm graded crushed stone aggregate) including necessary mild steel wire reinforcement, moulds etc, set in postion in cement mortar (1:4) complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floor & pavings n.exc 15 cm thickn below or above GL complete all as specified and directed.

M&L for 75 mm thick PCC (1:4:8) type D-2, (using 40 mm agraded stone aggregate) as in sub base and the like complete all as specified and directed.

M&L for 40mm thick PCC (1:2:4) type B-1, (using 20mm graded stone aggregates) as in flooring, laid in panels, finished even and smooth using extra cement complete all as specified and directed.

M&L for precast cement concrete chequered tiles 250 x 250 x 25 mm thick with grey cement and pigment, laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6), set & jointed in neat grey cement slurry and pointed in coloured cement to match, complete all as specified and directed

M&L for 60mm machine pressed precast cement concrete M35 grade interlocking paver block with grey cement and pigment of approved shape and size, conforming to IS 15658-2006, laid over sand cushioning complete all as specified and directed. Note:-Sand cushioning shall be measured and paid for separately.

Supply and laying dry river sand in 25 mm thick layer for cushioning to interlocking paver block complete all as specified and directed.

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation etc or for manholes, cesspits, shafts etc not exc 10 Sqm on plan and getting out in soft / loose soil, complete all as specified and directed.

Demolition and breaking of drain pipes (SGSW, AC or RCC) of 200 mm dia bore, set in cement mortar and taking out from trenches complete all as specified and directed by Enginner-in-Charge.

Supply and laiying reinforced concrete pipes 200 mm dia bore, class NP 2 with one collar per length of pipe, set and jointed in cement mortar complete all as specified and directed.

M&L for cement Concrete (1:3:6) type C2 (using 40 mm stone aggregrate) as in bed to 200mm dia bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Enginner-in-Charge.

Demolition and breaking up drain pipes (SGSW, AC or RCC) of 300 mm dia bore, set in cement mortar and taking out from trenches complete all as specified and directed by Enginner-in-Charge.

Supply and laiying reinforced concrete pipes 300 mm dia bore, class NP 2 with one collar per length of pipe, set and jointed in cement mortar complete all as specified and directed.

M&L for cement Concrete (1:3:6) type C2 (using 40 mm stone aggregrate) as in bed to 300mm dia bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed by Enginner-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick each layer complete all as specified and directed.

Removing exacavated surplus soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 M above the starting point complete all as specified and directed.

sidh builders

AJAY KUMAR CONTRACTOR