Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.5 LAccepted-AOC | ₹41.5 L Quoted ₹41.8 L | L1 | Accepted-AOC ACCEPTED BEING LOWEST QUOTED |
| 2 | L2₹43.0 L+₹1.2 L (2.76%)Rejected-AOC 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | ₹43.0 L+₹1.2 L (2.76%) | L2 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
| 3 | L3₹43.0 L+₹1.2 L (2.81%)Rejected-AOC | ₹43.0 L+₹1.2 L (2.81%) | L3 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
| 4 | L4₹43.5 L+₹1.7 L (3.96%)Rejected-AOC | ₹43.5 L+₹1.7 L (3.96%) | L4 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
| 5 | L5₹45.7 L+₹3.9 L (9.26%)Rejected-AOC | ₹45.7 L+₹3.9 L (9.26%) | L5 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
Tender Value
Refer Docs
EMD Value
₹88,000
Closing Date
4 Jul 2025, 6:00 pmClosed
GE ARMY GANDHINAGAR
GE ARMY GANDHINAGAR PO BSF CAMPUS GANDHINAGAR 382045
SPECIAL REPAIR TO ASBESTOS SHEET AND CONNECTED BR WORKS TO BLDG NOS. P 2 P 3 AND P 4 AND PROVN OF PARKING SHEDS AT VARIOUS LOCATIONS AT MIL STN GANDHINAGAR
2025_MES_713087_1
GE(A)/GNR/TOKEN/11 of 2025-26
Open Tender
Coal Works
Item Rate
180 days
MIL STN GANDHINAGAR
AS PER TENDER DOCUMENTS
6 documents required · 6 mandatory
₹500
GE ARMY GANDHINAGAR
₹88,000
Yes
28 Jul 2025
7 Jun 2025
11 Jul 2025
7 Jun 2025
4 Jul 2025
21 Jun 2025
7 Jun 2025 - 19 Jun 2025
Amount
Excavation in post holes each not exc 0.5 cum, getting out soft/loose soil , returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm, watering and removing surplush soil to a distance n exc 50m and making good surface complete all as directed by Engineer-in-charge and all as specified.
Surface dressing not exc 15cm deep in soft/loose soil complete all as specified and directed by Engr-in-Charge. Note : Removing of vegetation / shrubs / brushwood / undergrowth and carrying away rubbish to a distance of 50 m deemed to included in quoted rate.
M&L for cement concrete in foundations, filling and mass concrete 1:4:8 type D -2 using 40 mm graded aggregate complete all as specified & directed by Engr-in-Charge.
M&L for PCC Type B2 1:2:4 (40 mm graded aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed by Engr-in-Charge.
M&L providing cement concrete (1:2:4) type B1(using 20mm graded stone aggregate) as in cills, steps, seismic and other similar and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, knelers, apex stones.
M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and leveled in layers not exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for Brick work with sub class old 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed.
S&F, in repair, 1.0mm thick Mild Steel, plain, black sheet in wall cladding, steel gates and similar work, cut size, holes punched: including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred completed all as specified and directed.
M&L for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-290 Gde E-165 etc complete all as specified & directed by Engr-in-Charge.
S&F for Roof trusses (framed), trussed, purlins, crane gantries, rails and fasterings and heavy brackets, framing (Beam, tee, angle, channel or flat section) includings distance pieces, cleats etc Fe-290, E-165 complete all as specified and directed.
M&L steel work in tubular truess, purline rafter columns etc including welding ,butt welded tubes conferming to IS-1161-1979 grade St-240, complete all as directed by Engineer-in-charge.
S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified & directed by Engr-in-Charge.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet, 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for glass dividing strip, 3mm thick & 38mm width inserted in position confirm to design complete all as specified and directed.
M&L for 75mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement, Joints of plinth protection shall be filled with bitumen mastic (1:3) complete all as specified and as directed.
M&L for 100 mm thick PCC (1:4:8) type D2 using 40 mm graded crushed stone aggregate as in sub base, surface finished fair and even complete all as specified.
M&L for 75mm thick PCC Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in flooring & alternate panel (2.5mtr X 2.5mtr ) including power floater conncrete machine vibrater with glass strip etc. including necessary form work complete all as specified and directed by Engr-in -Charge. Note :- S&F glass strip shall be measured and paid separately under respective items.
M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in floors and finishing the top surface even and smooth with using extra cement complete all as specified and directed.
Taking down cement plaster on brick or stone wall etc. including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.
M&L for rendering cement plaster 10mm thick in cement mortar (1:6) on brick work or concrete surfaces of walls, finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering cement plaster 12mm thick in cement mortar (1:4) on brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparing new plastered or un-plastered wall surfaces and applying three coats of white wash complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat primer complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered wall surfaces including brooming down or steel wire brushging, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of cement base paint complete all as specified and directed.
M&L for preparation of old decorated plastered or unplastered wall surfaces including brooming down or steel wire brushging, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed.
Hacking out old broken glass ( any thickness ) size or description from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads.
S & F 3 mm thick plain sheet glass, ordinary quality and glazing not exceeding 0.5 Sqm in each pane fixed to steel window with glass putty complet all as specified and directed.
M&L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying one coat of red oxide primer complete all as directed by Engineer-in-charge and all as specified.
M&L painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of zinc chromic primer including preparation of surfaces.
Dismantling of MS steel gate size not exceeding 10 Sqm single or double leaf any type and design , for carrying out minor repair like replacement of worn out mild steel sections , welding etc fixing the gate in same or different location including painting the entire steel surface with two coats of first quality synthetic emanel paint over a coat of zinc chromate primer to the satisfaction of Engineer-in-Charge. (Note : (i) MS sections used shall be measured and paid separately (ii) Quoted rate is deemed to be inclusive of dismantling , refixing , welding & painting complete).
Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed
Dismantling Asbestos cement (corrugated, semi corrugated etc) sheets in roof coverings.
ALBA AC AND REF SERVICES (BID ID -3338032)
RK CONSTRUCTION (BID ID -3338692)
Ramdev and Sons (BID ID -3345956)
Shree Builders (BID ID -3338703)
SNEH TRADERS (BID ID -3345767)
Priya Construction co. (BID ID -3338544)
Shree Khodal Infra Project (BID ID -3346304)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .