REPAIR AND POLISHING TO WOODEN /STEEL FURNITURE AT RTS AND DEPOT HEMPUR UNDER GE(EAST) BAREILLY

Amount

Table Centre (FD-274/375) Dismantling of old and unserviceable top and S&F new top made out of 18mm thick prelaminated particle board exterior grade Make-Eco board/ Nuwood or its approved equivalent ISI Marked with 4 mm teak wood beading alround the top. 8 Nos wooden cleats joining to rails & lags shall be provided complete all as specified directed and shown on drawing.

Dismantling of old and unserviceable legs and S&F new legs made out of 1st class hard wood shisham to required shape and size including PVC shoe complete all as specified and directed

All as per item No.1.01 above but long rail/long stiffner for table centre complete all as specified and directed.

All as per item No.1.01 above but short rail/ short stiffner for table centre complete all as specified and directed.

Table Peg (FD-277/384) Dismantling of old and unserviceable top and S&F new top made out of 18mm thick prelaminated particle board exterior grade Make-Eco board/ Nuwood or its approved equivalent ISI Marked with 4 mm teak wood beading alround the top complete all as specified directed and shown on drawing.

Dismantling of old and unserviceable legs and S&F new legs made out of 1st class hard wood shisham to required shape and size including PVC shoe complete all as specified and directed

All as per item No.2.01 above but long rail/long stiffner for table peg complete all as specified and directed.

All as per item No.2.01 above but short rail/ short stiffner for table peg complete all as specified and directed.

Teapoy (FD-278/382) Dismantling of old and unserviceable top and S&F new top made out of 18mm thick prelaminated particle board exterior grade Make-Eco board/ Nuwood or its approved equivalent ISI Marked with 4 mm teak wood beading alround the top complete all as specified directed and shown on drawing.

Dismantling of old and unserviceable legs and S&F new legs made out of 1st class hard wood shisham to required shape and size including PVC shoe complete all as specified and directed

All as per item No.3.01 above but long rail/long stiffner for teapoy complete all as specified and directed.

All as per item No.3.01 above but short rail/ short stiffner for teapoy complete all as specified and directed.

Table 900mm x 600mm with or without drawer (FD-283/284) Dismantling of old and unserviceable top and S&F new top made out of 18mm thick prelaminated particle board exterior grade Make-Eco board/ Nuwood or its approved equivalent ISI Marked with 4 mm teak wood beading alround the top complete all as specified directed and shown on drawing.

Dismantling of old and unserviceable legs and S&F new legs made out of 1st class hard wood shisham to required shape and size including PVC shoe complete all as specified and directed

All as per item No.4.01 above but long rail/long stiffner for table complete all as specified and directed.

All as per item No.4.01 above but short rail/ short stiffner for table complete all as specified and directed.

All as per item No.4.01 above but drawer for table complete all as specified and directed.

Sofa set five/ four seater (FD-281/257/373) M&L renewal of foam cushion, 100mm thick 32 denstity of size 21"X22" make-sleepwell/Ashoka foam covered with soft malmal white cloth inner, Outer cover tapestry cloth of approved quality with chain/zip system, rate of tapestry cloth not less than 250/- per mtr compplete all as specified and directed.

Sofa set five/ four seater (FD-281/257/373) Removing the following existing broken wooden members and fixing new wooden parts made out of Ist class hard wood teak duly shaped and making surface wrought and polished all as per shown in drawing compplete all as specified and directed.

Seat & back long rail of three seater

Stiffners of Seat & back of three seater

Front/rear legs

Front, back & side rails of single seater

Arm rest

Stiffners of Seat & back of single seater

Seat & back battens

Table dining 6/8 persons (FD-273/376) Dismantling of old and unserviceable top and S&F new top made out of 18mm thick prelaminated particle board exterior grade Make-Eco board/ Nuwood or its approved equivalent ISI Marked with 4 mm teak wood beading alround the top. 8 Nos wooden cleats joining to rails & lags shall be provided complete all as specified directed and shown on drawing.

Dismantling of old and unserviceable legs and S&F new legs made out of 1st class hard wood shisham to required shape and size including PVC shoe complete all as specified and directed

All as per item No. 7.01 above but long rail for table dining 6/8 pers complete all as specified and directed.

All as per item No. 7.01 above but short rail for table dining 6/8 pers. Complete all as specified and directed.

Chair writing/ CBA (FD-280/30) Dismantling of old unserviceable front legs of chairs writing/CBA and S&F of new front leg made of 1st class HW shisham,made of shape and size. PVC shoe shall be provided where ever required all as shown on drg and as directed.

All as per item No. 8 above but Rear leg for chair writing /CBA complete all as specified and directed

All as per item No. 8 above but rails for chair writing/CBA complete all as specified and directed

All as per item No. 8 above but Stiffners for chair writing/CBAcomplete all as specified and directed

All as per item No. 8 above but Arm rest for chairs writing/CBA complete all as specified and directed

All as per item No. 8 above but back support for chairs writing/CBA complete all as specified and directed

Chair dining CB/ WB (FD-279/285) Dismantling of old unserviceable front legs of chairs dining CB/WB and S&F of new front leg made of 1st class HW shisham,made of shape and size. PVC shoe shall be provided where ever required all as shown on drg and as directed.

All as per item No. 9 above but Rear leg for chairs dining CB/WB complete all as specified and directed

All as per item No. 9 above but rails of chair dining/WB complete all as specified and directed

All as per item No. 9 above but stiffners(side/middle) chair dining/WB complete all as specified and directed

All as per item No. 9 above but back support for chair dining complete all as specified and directed

Chair easy (FD-229) Dismantling of old unserviceable front/ rear legs of chairs easy and S&F of new front/ rear leg made of 1st class HW shisham,made of shape and size. PVC shoe shall be provided where ever required all as shown on drg and as directed.

All as per item No. 10 above but rails of seat & back for chair easy

All as per item No. 10 above but Arm rest chair easy

Canning (FD-284/204/279/229/280/252) Removing of old unserviceable cane from chairs and reweaving of chairs/B&H furniture with plastic cane 2 mm wide half round gola type Make-Premier/Shah or equivalent as approved complete all as specified and directed.

Chair Vernadah (FD-16/256) Removing of old unserviceable cane from chair and recanning of Chair Verandah with plastic cane 4mm wide half round gola type Make-Premier/Shah or its approved equivalent incl painting of complete chair before recanning with two coat of synthetic enamel paint white, Rubber shoe shall be provided where ever required to the bottom of legs all as specified and directed.

Charpoy GI Nylon Newar (FD-220) Removing of old unserviceable newr from GI charpoy and reweaving with plastic cnewar 50mm wide Make-Premier/Shah or its approved equivalent all as specified and directed.

Polishing Preparation of old surface with emery paper, filling the gaps with bee wax plaster of paris, applying raw siena with de-natured spirit and smoothing and surfaces with sand paper and applying two coats of french polish of surperir quality all as specified and as directed to give glossy finish for the following :-

Hat stand with mirror complete all as specified and directed. (FD-206/233/362)

Side board complete all as specified and directed.(FD-241/371)

Table dressing gents complete all as specified and directed.(FD-230/379)

Table dressing ladies complete all as specofied and directed .(251/378/ FD/MAP-II/07)

Stool dressing CB,Cushioned complete all as specified and directed. (FD-374/252)

Chair writing/ Chair CBA complete all as specified and directed.(FD-280/30)

Chair dining CB/WB complete all as specified and directed .(FD-279)

Chair easy complete all as specified and directed. (FD-229)

Book case small complete all as specified and directed.(FD-45/237)

Table centre complete all as specified and directed.(FD-375/274)

Table dining 6/8 pers complete all as specified and directed.(FD-273/376)

Table peg complete all as specified and directed.(FD-277/384)

Table bed side complete all as specified and directed. (FD-276)

Teapoy complete all as specified and directed. (FD-278/382)

Table 3' x 2' with/without drawer complete all as specified and directed. (FD-283/284)

Sofa set 4/5 seater complete all as specified and directed.(FD-281/257)

GI Charpoy (FD-220) Removing of old unserviceable ply top from charpoy GI Pipe, tightening of loose all components (i.e. complete Charpoy) and S&F ply wood of size 1990x900x12mm thick BWR grade ISI marked with appropriate mild steel galvanised iron nuts and bolts of 6mm dia and suitable size long complete all as specified and directed.

Removing of unserviceable long rail from old GI charpoy and providing new long rail made of 32mm bore GI pipe medium grade, both end duly threaded complete all as specified and directed.Make: SWASTIC/JINDAL/TATA

Removing of unserviceable short rail having both threaded ends broken and fixing of two Nos short rails made from cutting of long rail obtained from item No 16.01 above threading the both ends of short rails and fixing in position complete all as specified and directed.

Removing of unserviceable legs, threading and fixing legs made from cutting of short rails obtained from items No 16.02 above and fixing in position including provision of 3mm thick MS round disc 50mm dia to end of leg by welding all around complete all as specified and directed.

Removing of existing cracked deshaped or unserviceable elbow and S&F new 32mm bore GI Elbow (ISI Mark) three way complete all as specified and directed.

Removing of existing cracked deshaped or unserviceable check nut and S&F new 32mm bore GI check nut (thickness of check nut shall not be less than 6mm) ISI Marked complete all as specified and directed.

S & F two Nos MNF clamp made out of MS Flat iron 25 x 3 mm weldede to GI pipe leg as per drawing. The end of lower clamp shall be closed with 16mm dia 3mm thick washer welded complete all as specified and directed.

S&F round bottom disc 50mm dia 3mm thick by welding around the bottom of leg in cluding removing of old broken disc complete all as specified and directed.

Book case steel(FD-1028) S&F in repairs lock of brass, 6 lever, Godrej pattern, inside with steel body/box and keys in duplicate for book case steel complete all as specified and directed.

S&F in repairs mild steel cromium plated handle 100 mm long bow type for book case steel complete all as specified and directed.

S&F in repairs 3 mm thick, ordinary quality, plain glass pane, for book case steel complete all as specified and directed.

Table Office Officer Steel(FD-84/1003) Taking down old unserviceable top of table office officers steel and S&F new top of table made out of 18 mm thick prelaminted particle board one side teak face and other side white shade exterior grade ISI marked with 4 mm wood beading duly polished alround top complete all as specified and directed.

Table Office Clerk/Typist Steel(FD-381/1004/84) All as per ser item No. 18 here in before but top for table office clerk/typist steel complete as shown in drg complete all as specified and directed.

Table Office officer/Clerks/|Typest(FD-84/1004/1006/1003) Removing old unserviceable drawers of table officers/clerk/typist steel and replacing the same with new steel drawer made out 1 mm thick mild steel sheet and duly painted with two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

Table Office Officer/Clerk 3' x 2' with drawer Steel (FD-84/1004/1008/1003) S&F in repairs of locking arrangement of drawers with brass 6 leavers, inside with steel body/box with duplicate keys for table complete all as specified and directed.

Table 3' x 3' Steel (FD-1009) Dismantling of old and unserviceable top and S&F new top made out of 18mm thick prelaminated particle board exterior grade Make-Eco board/ Nuwood or its approved equivalent ISI Marked with 4 mm teak wood beading alround the top complete all as specified directed and shown on drawing.

Table dining ORs Aluminium Top (FD-165) Dismantling of old type of table dining ORs and S&F new table top made out of 18 mm thick, commercial face block board, exterior grade duly lined on top with 0.65 mm thick aluminium anodised sheet fixed with appropriate size of aluminium nails complete all as specified and directed.

Almirah Steel medium/large/MAP(FD-243/1032/ FD-E6/MAP/18) S&F in repairs for locking arrangement with 65mm brass 6 leavers, 6 leaver for almirah steel medium/large/MAP compplete all as specified and directed.

S&F repair handle of cast iron CP 125 mm long to almirah medium/large steel complete all as specified and directed.

Repair to shutter of almirah medium/large steel/locker bed side by straightening of dented portion and by replacing the broken butt hinges complete all as specified and directed.

S&F in repair MS cleats of 25mm x 3mm by welding to support the shelf and straightening for dent portion of shelf if any complete all as specified and directed. Note : Replacing of four cleats shall be measured and paid as one unit.

S&F in repairs shelves of almirah large steel made out of 1mm thick MS sheet duly painted with two coat of enameled paint over a coat of red oxide primer as shown in drg complete all as specified and directed.

All as per item No 24.04 above but shelf for almirah medium steel complete all as specified and directed.

S&F in repairs of legs to almirah large, med/side locker made out of 1 mm thick MS sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer complete all as shown in drg and directed.

Chair writing MAP(FD/E6/MAP/12) Removing faded colour seat and back from chair writing MAP and S&F new upholstred duly stiched and with PVC lipping all around and rubber complete all as specified and directed. Note : Colour of upholstry shall be approved by GE. Minor repair shall be carried out without any extra cost. Rate shall be deemed with upholstry work complete all as shown in drg and directed. cost of upholstry shall not be less than Rs 300/-Sqm.

S&F in repair handle black integral polythene reinforced with MS insert, screch and weather resistant to chair writing MAP as shown in drg complete all as specified and directed.

Chair computer/revolving(FD/E6/MAP/01/TP) Removing faded colour seat and back from chair computer/revolving and S&F new upholstred duly stiched and with PVC lipping all around and rubber complete all as specified and directed. Note : Colour of upholstry shall be approved by GE. Minor repair shall be carried out without any extra cost. Rate shall be deemed with upholstry work complete all as shown in drg and directed. cost of upholstry shall not be less than Rs 300/-Sqm.

S&F in repair handle black integral polythene reinforced with MS insert, screch and weather resistant to chair computer/revolving as shown in drg complete all as specified and directed.

S&F in repair pedstal assembly of chair computer with twin wheel castors set of five as shown in drg complete all as specified and directed.

S&F in reapir of hydrolic assembly of chair computer as shown in drg complete all as specified and directed.

Locker bed side steel/SKD(FD-1029/257) Dismantling old unserviceable single door leaf and provn of new front door made of 1 mm thick MS sheet duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and providing CP handle and hasp and staple as shown in drg complete all as specified and directed.

S&F in repair of MS CP handle 125mm long as shown in drg complete all as specified and directed.

S&F in repair hasp and staple 75mm MS,chromium plated as shown in drg complete all as specified and directed.

Chair CB Steel with Arms(FD-75) Taking down existing old unserviceable seat of chair and S&F new seat duly polished with one coat black polish and canned as godrej pattern with 2mm wide with 4mm border (make-primer/Shah)seat to fixed with required screws and four numbers of rubber shoe at bottom of frame shall be provided where ever required. frame of chair shall be painted a coat of synthetic enamel before fixing of seat in drg complete all as specified and directed.

All as per item No 28 above but back of chair CB steel with arm and rubber cap on top of frame of the chair shall be provided where ever required all as shown in drg complete all as specified and directed.

Taking down old unserviceable arm of chair CB steel and S&F new wooden handle arm to chair CB steel duly painted black polish all as shown in drg complete all as specified and directed.

S&F flat iron stiffner 25mm x 535mm x 3mm thick shall be welding at bottom of seat/top of back for chair CB steel with or without arm duly painted black enamel paint all as shown in drg complete all as specified and directed.

Chair Verandah(FD/E6/MAP/11/FD-259) Removing of old unserviceable nylon newar from chair verandah reweaving with nylon newar 50-55mm wide in light white colour 1st grade as approved by GE not made of recyled nylon. Chair shall be painted before reweaving with two coat of synthetic enamel paint white, four Nos rubber shall be provided to the bottom of legs each chair as shown in drg complete all as specified and directed.

Steel Furniture M&L for spot/tack welding in repair n.exc 2.5cm to steel articles thickness not exceeding 6mm complete all as specified and directed. Note : One unit calculated up to 25mm.

Painting M&L for prepartion of old painted/steel surfaces by wire brushing/scratching/ straightening dented portion and applying two coat of synthetic enamel paint with sprayer complete all as specified and directed to give a glosy finish for the following items :-

Almirah large steel with shelves external and internal complete all as specified and directed.(FD-351/1031)

Almirah medium steel with shelves external and internal complete all as specified and directed.(FD-343/1032)

Almirah large steel MAP complete all as specified and directed. (FD/E6/MAP/18)

Table dining ORs steel complete all as specified and directed.(FD-165M)

Table office officer steel complete all as specified and directed.(FD-84/1003)

Table office clerk/typist steel complete all as specified and directed. (FD-381/1004/1006)

Locker bed side steel/SKD complete all as specified and directed. (FD-257/1029)

Note : Tenderers may note that amount of credit Rs 4,728.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

Kushwaha Enterprises

GUPTA IRON UDYOG