LAC ADS KIP LB Construction of canal road Kottiyam Branch Canal Construction of canal road between Ch 1930 m to Ch 2080m Madankavu Perinjelil Road in Elampalloor Grama Panchayath Ward 8 in the Kundara LAC General Civil Work

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

2.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

OD29737/2024-2025:Filling up low laying and water logged areas with local materials/quarry muck, spreading in layers, levelling the top at site and consolidation by ramming etc complete for improving the CBR value of subgrade

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD29736/2024-2025:Name board of size 75X60 cm installed in the appropriate place visible to the public made of brick wall with granite plaque should be inserted and engraving letters etc. complete as per departmental officers at site.

OD34845/2024-2025:Manufacturing, supplying and fixing sign boards of size 1.0 x 0.4m made up of 2 mm thick Japan sheet, support frame of M.S. angle iron of size 25x25x3 mm to 2 vertical posts 2.2m long made up of M.S. Tee section ISNT 40x40x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer .Backside of sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat and firmly fixed to the ground after excavation by means of properly designed foundation of size 0.25x0.25x0.45m with CC 1:2:4 using 20mm broken stone including all cost and conveyance of materials, labour charges, leads and lifts etc. complete as per drawing , specification and direction of Engineer--in-charge. (excluding lettering which is paid separately)