Annual Maintenance Contract (AMC) for 60T Electronic Weighbridge at Phase-II and for 50T Electro-Mechanical Weigh bridge at Phase-I for the year 2025-2027.

Annual Maintenance Contract (AMC) for 60T Electronic Weighbridge at Phase-II &for 50T Electro-Mechanical Weighbridge at Phase-I for the year 2025-2027.

Comprehensive Annual Maintenance contract (AMC) for 60T Electronic weighbridge at Phase II CD for Year1. CAMC includes the following works:- Comprehensive Annual Maintenance Contract for 60T Electronic Weighbridge at Phase II, Ambalamedu.The work includes on-call visit/ Breakdown visit/ service visit for routine service /calibration/ preventive maintenance of weigh bridge throughout the AMC period as per Annexure II –Special Terms& Conditions.

Comprehensive Annual Maintenance contract (AMC) for 60T Electronic weighbridge at Phase II CD for Year2. CAMC includes the following works:- Comprehensive Annual Maintenance Contract for 60T Electronic Weighbridge at Phase II, Ambalamedu.The work includes on-call visit/ Breakdown visit/ service visit for routine service /calibration/ preventive maintenance of weigh bridge throughout the AMC period as per Annexure II –Special Terms& Conditions.

Lifting up & Descending down of the 60T weigh bridge platform at phase-II for Inspection works/ Refurbishment/ Painting etc. The work involves:- i) Lifting of the entire Weighbridge platform using hydraulic jack/lifting tools to a specified height (up to 1m) as needed for any Mechanical inspections underneath the platform structure. The platform then shall be supported on Blocks/Supports provided by FACT. ii) Removal of all Load cells (max 6 numbers) from the Weighbridge after proper disconnections at the Load cell junction Box. iii) After the inspection & subsequent related works by FACT, descending the uplifted Weighbridge platform using hydraulic jack/lifting tools. All load cells to be fixed back along with proper connections at the junction Box and routing through the cable pipes. The platform shall be descended to a level just above all the Load cell corners as required for further final alignments. iv) Performing calibration check, corner test. v) Checking/ ensuring normal functionality. . After completion, the weighbridge should be handed over to FACT for stamping.

Liaison and coordination with Legal Metrology Department for annual re-verification and stamping of the 60T weighbridge at phase-II. Contractor`s scope of work: (i) The scope of work includes minor preparatory works, Liaison and coordination with Legal Metrology Department for annual re-verification and stamping of the specified weighbridge. (ii) All the transportation arrangements & related costs incurred shall be borne by the contractor. (iii) The contractor shall meet all the incidental expenses in connection with verification & stamping. (iv) All necessary tools & tackles required for the work. (v) The contractor shall complete the annual re-verification and stamping works before the due dates of Stamping for Electronic Weigh bridge (60T) at Phase-II area, Ambalamedu. (vi) After the completion of the work, the contractor shall collect the verification/ stamping certificates from the Legal Metrology Department and hand over to FACT, without delay. FACT’s scope of work: (i) The Stamping fees for the Annual re-verification and stamping of the specified Electronic Weighbridges shall be in the scope of FACT.

On-Call maintenance visit for 50T Electro-Mechanical Weighbridge at phase-I. The Job includes servicing of 50T Electro-Mechanical Weighbridge on demand or on breakdown as per scope of work and Terms & conditions of this contract. as per Annexure- II special terms and conditions of the work.

Liaison and coordination with Legal Metrology Department for annual re-verification and stamping of the 50T Electro Mechanical weighbridge at phase-I. Contractor`s scope of work: (vii) The scope of work includes minor preparatory works, Liaison and coordination with Legal Metrology Department for annual re-verification and stamping of the specified weighbridges. (viii) All the transportation arrangements & related costs incurred shall be borne by the contractor. (ix) The contractor shall meet all the incidental expenses in connection with verification & stamping. (x) All necessary tools & tackles required for the work. (xi) The contractor shall complete the annual re-verification and stamping works before the due dates of Stamping for Electro Mechanical Weighbridge at Phase-I area, Ambalamedu (50T). (xii) After the completion of the work, the Contractor shall collect the verification/stamping certificates from the Legal Metrology Department and hand over to FACT, without delay. FACT’s scope of work: The Stamping fees for the Annual re-verification and stamping of the specified Electronic Weighbridges shall be in the scope of FACT.