Enquiry No I-13517/LTE/CONT/BT

Amount

PROVIDING AND LAYING FOUR COURSES WATER PROFFING TREATMENT WITH BITUMEN FELT OVER ROOFS CONSISTING OF FIRST AND THIRD COURSES OF BLOWN OR/AND RESIDUAL BITUMEN APPLIED HOT AT 1.45 KG PER SQUARE METRE OF AREA FOR EACH COURSE, SECOND COURSE OF

PROVIDING AND FIXING OXIDISED M.S. TOWER BOLT (BARREL TYPE) WITH NECESSARY SCREWS ETC. COMPLETE: 150*10 MM.

PROVIDING AND FIXING OXIDISED M.S. HANDLES WITH NECESSARY SCREWS ETC. COMPLETE: 100MM.

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. meters and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disp

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work.

Finishing walls with water proofing cement paint of required shade :Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finish & reinforce - All work up to plinth level:1:1.5:3(1cem:1.5 cor sand:3 graded stone agg 20 mm nominal size)

Welding by electric plant including transportation of electric welding plant at site etc. complete as per direction of Engineer-in-charge.

Removing of old damaged tarfelt from the esisting roof buildings including cleaning the surface and transporting the debris within a lead of 1 km.

Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete : 150 mm

Providing and fixing ISI 250x16 marked oxidized M.S. sliding door bolts with nuts and screws etc. complete:250 x16 mm

Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size of approved shade, colour and

Finishing walls with textured exterior paint of required shade :Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm.

PROVIDING AND FIXING 25 M.M. THICK SHUTTERS FOR CUPBOARD SECOND CLASS TEAK WOOD INCLUDING ISI MARKED ANODISED ALUMINIOUM BUT HINGES WITH NECESSARY SCREWS

WALL PAINTING WITH ACRYLIC EMULSION PAINT OF APPROVED BRAND

Providing and fixing ISI marked M S Butt Hinges bright finished with necessary screw etc. complete: 100x58x1.90 mm.

GARG ENGINEERING AND CONSTRUCTION PRIVATE LIMITED

M/S. P.B ENTERPRISES