PROVN OF BATHROOM BLOCK 20 CUBICALS FOR OR OTM ACCN IN MED REGT AND 01 NOS TOILET BLOCKS IN UNIT AREA OF CORPS ZONE WKSP IN THE AREA OF AGE BR II UNDER GE ARMY CENTRAL IN ARMY AREA JODHPUR (9044/E8)

Amount

Excavation in trenches not exceeding 1.5m wide & not exceeding 1.5m in depth, for foundation etc for shaft, wells, cesspits, manholes, pier holes, etc, not exceeding 10 sqm on plan and not exc. 1.50m in depth and getting out in any type of soil complete all as specified and as directed.

M&L for plain cement concrete (1:4:8) type D-2 using 40 mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified & directed by Engineer-in-charge.

M&L squared rubble walling, Jodhpur type, regular coursed , well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

Extra over stone walling for hammer dressing to face stones with maximum depression on face from a straight edge not exceeding 20mm & dressing face beds and joints as specified to square rubble walling un-coursed or brought up to courses complete all as specified & directed by Engineer-in-charge.

Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soil, complete all as specified and as directed.

Spreading and levelling in layers not exceeding 25cm thick , well ramming including watering as required as in under floors complete all as specified and as directed.

Removing of excavated material to a distance not exceeding 50m and deposited where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

Pre-cast cement concrete block masonry using PCC, 1:3:6, type C-1 solid blocks, exceeding 10 cm in width and setting in cement mortar 1:6, straight or curved on plan exceeding 6 m mean radius, including demolition of block walling complete all as specified and as directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone or boulders, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.

M&L 25mm thick (average) PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base , the surface of concrete is to be finished even & rough to receive tile flooring surface, with out using extra cement complete all as specified and as directed.

M&L for joint free non skid ceramic tiles (premium quaity), coloured, of size exceeding 0.06 Sq.m and not exceeding 0.11 Sq.m, 7 to 8 mm thick [Square or Rectangular] as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 complete all as specified and as directed.

M&L for joint free coloured glazed ceramic tiles (premium quaity) of size 450mmx350mmx7mm / 450mm x 300mm x 7mm thick on vertical surface of wall over and including 10mm thick backing coat in CM 1:4 set and jointed in neat cement slurry and pointed in white cement / coloured cement to match the tiles complete all as specified and as directed.

TMT steel bars of 8 mm to 10mm dia, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

TMT steel bars of 6 mm to 8 mm dia bars as in reinforcement, stirrups, spacers and binders, cut to length, bent to shape required including cranking, bending, spirally for hooping, hooking ends and binding with annealed mild steel wire not less than 0.9mm dia or securing with clips or welded complete all as specified and as directed.

RCC M-25 (20 mm graded crushed stone agg) design mix as in slabs supported on walls, beams and colunms in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

RCC M-25 (20 mm graded crushed stone agg) design mix as in beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including rough finished surfaces, complete all as specified and directed.

Use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide including rough finished surfaces, complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick [horizontal or sloping] including fair finished surfaces complete all as specified and directed.

M&L 50mm thick, PCC (1:2:4) type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof finished surface, including mixing with WPC and necessary form work complete all as specified and as directed.

M& L for carrying out of water proofing treatment in roof in the following stages : (a)- M & L for 10 mm thick screeding in cement mortar 1:3 on brick work or concrete surfaces on roof surfaces mixed with WPC, surface finished even and smooth without using extra. (b)- Apply first coat of bitumen primer confirming to IS 3384-1986 @ 0.40Kg/Sqm. (c)- Second coat of bonding material using hot blown type bitumen confirming to IS- 702-1988 grade 85/25 @1.20 Kg/ Sqm (d) Third layer of 3 mm thick APP modified polymeric membrane with non-woven polyester reinforcement shall be laid by torch application method. The side overlaps of minimum 75 mm and the end laps of minimum 100 mm. All overlaps & joints shall be sealed as per manufacturer's instructions. (e) Fourth coat of bonding material using hot blown type bitumen confirming to IS 702-1998 of grade 85/25 @ 1.20 Kg/Sqm (f) Fifth and top most layer of surface finish 25mm thick PCC 1:2:4 type B-1 using 12.5mm graded crushed stone aggregate in roof padding over APP membrane, the surface of concrete is to be finished even and smooth with using extra cement and proved V shaped groove 6mm wide & 10mm depth filled with mastic bitumen of (1:1) complete all as specified and directed by Engr-in-charge.

M&L plain cement concrete, 1:2:4 type B1 (using 20mm graded stone aggregate), as in coping to parapet walls or others, bed plates, plinth courses, parapets and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.

M&L for 75mm thick Plain cement concrete 1:3:6 type C1 by using 20mm graded stone aggregate, as in plinth protection including necessary form work laid in alternate bays and filling the joints with bitumen mastic filler complete all as specified and directed.

M&L rendering 15mm thick in CM 1:6, on stone masonry wall surfaces, finished even and fair without using extra cement, complete all as specified and directed.

M&L rendering 5 mm thick in CM 1:3 on stone/ concrete surfaces of ceiling , finished even and smooth without using extra cement, complete all as specified and as directed.

M&L for keyed pointing in CM 1:3 to square rubble stone masonry jodhpur type wall surfaces, uncoursed or brought up to courses, complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on wall surfaces, complete all as specified and as directed.

Preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling surfaces, complete all as specified and as directed.

Preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint including & over one coat of primer complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete as per specifications and as directed .

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, complete all as specified and as directed.

S&F 100mm size butt hinges extruded aluminium alloy, with mild steel hinge pin, anodised type B-21, complete all as specified and as directed.

S&F 200mm size aluminium anodised barrel tower bolts of extruded section, complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and as directed.

S&F Factory made steel window / ventilators (partly fixed partly moveable) with top hung shutters including box type hinges, steel peg stay, complete all as specified and as directed.

Preparation of new or previously untreated steel surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red Oxide zinc chrome primer complete all as specified and as directed.

S&F 3.00mm thick sheet glass tinted, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sq.m in each pane with glazing pin, complete all as specified and as directed.

S & F vitreous china ware wash hand basin, white, flat back of size 550 mm X 450 mm including 32 mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, cutting for and pinning in ends of brackets or erecting strand, 32mm bore PVC flexible waste pipe,PVC connection15mm size with PTMT nuts of length 450mm long complete all as specified and as directed. Make: Jaquar / Cera / Hindware / Johnson

S&F pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' & 'Cold' with long screwed shanks and fly nuts, screwed for 15 mm bore iron pipe complete all as specified and as directed . Make: Jaquar

S&F viterous china bowl urinal flat back, of size 465 x 355 x 265mm white (Minimum) with grating and union for discharge pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including CP stop cock 15mm bore, ,PVC connection pipe 15mm bore 600mm length, PVC waste coupling 32mm and waste pipe etc complete all as specified and as directed. Make: Parryware / Cera / Hindware

S&F, fancy type, chromium plated, bib tap, long body cast copper alloy with spindle,half turn with screwed down, screwed for 15 mm bore iron pipe complete all as specified and as directed. Make: Jaquar / Cera / Marc

S&F stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed. Make: Jaquar / Cera / Marc

S & F brass chromium plated shower rose of size 15mm with or without swivel joints fixing to steel pipes complete all as specified and as directed. Make: Jaquar / Cera / Marc

S&F PTMT tubular towel rail, 20mm dia, D Typ450mm long between flanges including brackets complete all as specified and as directed. Make: Prayag / Polytuf

S&F soap dish, PVC superior quality as per sample, embedded in wall complete all as specified and as directed. Make: Prayag / Polytuf

S&F WHB shelf of PTMT superior quality as per sample, embedded in wall complete all as specified and as directed. Make: Prayag / Polytuf

S&F PVC floor trap, plain with CP grating including jointing with solvent cement for 75 mm bore pipes, complete all as specified and as directed.

S&F 75 mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and as directed.

S&F 75 mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches / in floors, complete all as specified and as directed.

S&F 110 mm bore PVC [SWR] pipes single socketed, in any length with rubber ring joints, laid in trenches / in floors, complete all as specified and as directed.

S&F 1000 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I including PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 25mm bore pipe weight not less than 455gms, complete all as specified and as directed. Make:- Sintex / Rotex / Polytuf

S&F GI tubing (ISI marked) 15mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

S&F GI tubing (ISI marked) 20mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed.

Machine cut kota stone slab flooring using 20 to 25mm thick slabs, laid and jointed with grey cement slurry mixed with a admixture of pigment to match shade of slab including rubbing and polishing to smooth mirror finish all to required sizes, the size and design / pattern of slabs shall be as directed, including diagonals, inlays, borders, margins in two or more shades of slabs including rounding to edges of kota stone screed bed or bedding layer of mortar 15 mm thick in cement Mortar 1:6, complete all as specified and as directed.

S&F 20 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

M&L for machine cut kota stone slab 40 to 50 mm thick as in partition wall laid and jointed with pigment to match the shade of the slab including rubbing and polishing moulding all corner incls all neccesary fixing arrangement, complete all as specified and as directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth, complete all as specified and as directed.

M&L peg set of 5 of stainless steel body heavy duty all as per sample approved by Engg-in-charge and fixed with CP screws, complete all as per specified and as directed.

Surface dressing not exceeding 15cm deep in any type of soil complete all as specified and directed.

M&L 100 mm thick PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and as directed.

M&L sand filling under floor or in foundations including watering and consolidation complete all as specified and as directed.

M&L machine pressed precast conctete interlocking paver block, rubberised finish any shape and size confirming to IS 15658-2006, M-35 Grade, with grey cement and pigments (approved sample kept in GE office), complete all as specified and as directed.

M&L precast cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in kerb stone blocks of approved size and setting in cement mortar 1:4 including demolition of old u/s stone kerb, complete all as specified and as directed .

M&L for connecting 25 mm bore GI pipe from existing water supply line including necessary fittings, excavation, clamping making holes to existing pipe line, complete all as specified and as directed .

S&F GI tubing (ISI marked) 25mm bore medium grade with all fittings and fixed complete to walls and ceiling or laid in floors, complete all as specified and as directed.

S&F 25 mm bore gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe, complete complete all as specified and directed.

PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) for concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested complete for 150mm bore pipe complete all as specified and as directed .

S&F 150 mm bore Salt glazed stone ware drain pipe laid in trenches and cement joint in cement mortar 1:1, complete all as specified and as directed .

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel [½ round or ¾ section] in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required for 100 mm dia of pipe, complete all as specified and as directed.

M&L for Precast cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone agg) as in manhole cover including chamfers weathering set in cement motar 1:4 and joints to match with CM 1:3 and all complete all as specified and as directed.

M&L 40mm thick, PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in damp proof course to horizontal or vertical surfaces including mixing with WPC and necessary form work, complete all as specified and as directed. NOTE :- WPC shall be measured and paid separately under respective item.

M&L 30mm thick, PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in roof finished the surface, including mixing with WPC and necessary form work complete all as specified and as directed. NOTE :- WPC shall be measured and paid separately under respective item.

M&L roughly squared stone lintels hammer dressed on face and soffits,hoisted, set and pointed in cement mortar 1:6 complete.n exc 3m in length, complete all as specified and as directed .

S&F 5 cm thick sand stone slabs Jodhpur pattern/colour in sun-shades, chajjas, shelves, cills, landings, cover stones, templates, etc not exceeding 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4, complete all as specified & as directed.

S&F Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25 to 35cm wide, hoisted and set, jointed and grouted in cement mortar 1:3 including dismantling of stone slabs of any description and in any position, complete all as specified and as directed.

S&F 300 mm length aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy, complete all as specified and as directed .

M&L for Rolled mild steel sections like angle, channel, flat, square etc as in framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars ,barred iron doors; ladders ;framed balusters walk ways railings framed work of water tanks and similar work confirming to Fe-290Gde E-165, complete all as specified and as directed.

S & F white vitreous china squatting pan "Orissa pattern" of size 580 mm X 440 mm with integral foot rests and PVC 'P' or 'S' trap including provision of cement concrete bedding 1:5:10 type E2, complete all as specified and as directed. Make: Cera / Hindware / Parryware

S&F 10 ltrs capacity PVC valve less, syphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including brackets, flush pipe of 32 mm dia and PVC connection 15mm size, 600 mm long with PTMT nuts, color of cistern properly match with WC color, complete all as specified and as directed. Make: Cera / Hindware / Parryware

S&F 100 mm bore CI Tee ordinary or inverted, complete all as specified and as directed.

M&L 100mm dia Cast iron floor trap, plain with grating including jointing with solvent cement, complete all as specified & as directed.

S&F SGSW gully trap, plain square or rounded for 180x 150 mm size, complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 100mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps, complete all as specified and as directed.

S & F sand cast, cast iron, soil / waste / vent pipes, 75mm bore, in any length with or without ears, jointed with cement sand mortar, fixed to walls with and including MS clamps, complete all as specified and as directed.

S & F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 100mm bore, for cast Iron soil / waste / vent pipes, complete all as specified and as directed.

S & F cast iron bends with ovall access door [any radius], diminishing pieces or tapers [larger bore measured] of 75mm bore, for cast Iron soil / waste / vent pipes, complete all as specified and as directed.

S & F cast iron vent cowls suitable for 100mm dia pipes, complete all as specified and as directed.

S&F CP grating including jointing with solvent cement for 100 mm size, complete all as specified and as directed.

S&F 100 mm CI bends with duck's foot or heel rest, complete all as specified and as directed.

M&L rendering 10 mm thick in CM 1:3, on concrete masonry wall surfaces, finished even and fair without using extra cement, complete all as specified and directed.

S&F 20 mm bore gun metal, globe or gate valve, heavy duty confirming to IS -778 with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

S&F in repairs of 500 ltrs capacity rotational moulded polythene water storage tanks white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I, complete all as per specified and as directed. Make:- Sintex (pure) / Rotex / Polytuf.

Granite slab 18 to 20mm thick machine cut, factory polished, Jet Black colour, as in WHB plateform oval cut type, steps, jambs, pillars, window cills, cooking platform, and like bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone, complete all as specified and directed.

M&L for connecting 20 mm bore GI pipe from existing water supply line including necessary excavation, clamping making holes to existing pipe line, complete all as specified and directed.

Point wiring using approved colour coding as per IS (Red , Black and Green for single phase circuits),with multi stranded copper conductor 1.5 sq mm nominal cross-sectional area, single core, PVC insulated and unsheathed FRLS cable 1100 Volts grade, ISI-694 marked with valid CML No.in and including heavy duty drawn through and including in 20mm dia PVC rigid conduit with all accessories complete concealed in wall/roof/floor etc, ISI marked with modular metal flush box of suitable size for mounting of modular switches, sockets and fan regulators etc, inciuding PVC insulated multistranded copper conductor 1.5 sq mm nominal cross sectional area single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly for,one way switch One light / fan / bell point controlled by one, one way switch, complete all as specified and directed .

All as per serial Item No.97.00 above but for 15 Amps 5/6 pin socket point on independent board with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor with 2.50 Sqmm PVC insulated FRLS multi-stranded copper conductor as earth wire complete all as specified and directed .

M&L switch piano, flush type, single pole, one way, 5/6 Amps, 230 Volts complete all as specified and as directed. Make: Legrand / L&T / Schneider

M&L switch piano, flush type, single pole, one way, 16 Amps, 230 Volts complete all as specified and as directed. Make: Legrand / L&T / Schneider

M&L socket outlet 6/16 Amps 2-in-1,3/5 pin 230V AC flush type, complete all as specified and directed. Make: Legrand / L&T / Schneider

S&F ceiling rose, 3 phase / PVC / Polycarbonate, isolated bodycomplete all as specified and as directed.

S&F LED tube light fitting ( integrated driver), mirror type with high output diffuser AC decorative type with driver holder 6500K colour temp, 2 feet long of 10 watt ( PC) complete all as specified and as directed Make : Bajaj / Havells / CG

S&F LED tube light fitting ( integrated driver), mirror type with high output diffuser AC decorative type with driver holder 6500K colour temp, 4 feet long of 20 watt ( PC) complete all as specified and as directed Make : Bajaj / Havells / CG

Supply, Fix, connecting and testing of LED street light luminaries 35 watt, energy efficient, pressure die cast aluminium housing with heat resistant toughened glass with frame & IP-66 protection and impact resistance IK 07, 5700K, fixed on pole, incld. 1.60 mtr long 40 mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of FI 40 mm x 6 mm with nuts, bolts & washers and conductor to fitting with 3 core 1.50 sqmm pvc insulated cable including taking down unserviceable light fitting complete all as per specified and directed by Engg-in-charge. Make : Havells / Bajaj / CG

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 L, BEE 5 star rated complete with all accesoseries such as safety valve, themostate NRV, connection piece etc.complete all as per specified and directed by Engg-in-charge.

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 8 way, 240V for fixing MCB's complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

S&F MCB SP ‘C’ Curve 10KA, 6 to 32 amps complete all as specified and directed . Make:- Legrand / Havells / L&T

S&F MCB SPN ‘C’ Curve 10KA, 40 amps complete all as specified and directed . Make:- Legrand / Havells / L&T

Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of strata, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc complete all as specified and as directed. NOTE :(i) The concrete pit shall be PCC 1:3:6 type C-1, 40 mm thick pre cast cover slab of RCC (1:2:4) type B-1 using 20mm graded stone aggregate reinforced with 8mm TMT bars @ 10 cm C/C on both sides with suitable cast iron handle shall be provided in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-( ii) Item includes the cost of GI pipe up to 7.5m for protection of earth wire. Any variation in length beyond 7.50 m shall be measured separately.(iii) Item includes cost of lead wire up to 7.5 m Any variation in length beyond 7.50 m shall be measured separately.(iv) PCC pit shall be provided at least 500 mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe, bends, elbow etc shall be deemed included in the unit rate.

Supply, laying, jointing and testing of 1100 volt grade heavy duty, insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi solid aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 2 core 16 sqmm complete all as specified and directed

S&F, Exhaust fan of 300 mm sweep with louvers made of sturdy engineering plastic body complete with bracket frame and making necessary electric connection complete all as specified and as directed . Make:-Bajaj / Havells / CG.

Supply & laying 40 to 50mm thick roughly hammer dressed Jodhpur stone patti cable cover 25cm to 30cm wide and not less than 60cm long each laid dry abutting with each other with maximum gap between adjacent slabs n. exc 10mm complete all as specified and as directed.

Supply and spreading clean dry sand ( river sand) in trenches for cushioning to PVC cable and punning to provide required cover to UG cable complete all as specified and directed . Note :- Punned thickness shall be measured for the purpose of payment.

GI tubing , medium grade of 50mm bore with fittings as in road crossings for cable protection complete all as specified and as directed.

Supply, Fix, connecting and testing of energy efficient, pressure die cast aluminium housing with heat resistant toughened glass with frame & IP-66 protection and impact resistance IK 07, LED street light luminaries 45 watt 5700K, fixed on pole incld. 1.60 mtr long 40 mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of FI 40 mm x 6 mm with nuts, bolts & washers and conductor to fitting with 3 core 1.50 sqmm pvc insulated cable Make : Havells Cat Part No LHETAXU7PN6J045 or techno commercially equivalent model of make Bajaj/Philips/CG

S&F factory made distribution board in sheet metal enclosure in double door with 200A rated bus bar,SPN 4 way, 240V for fixing MCB's complete all as specified and as directed. Make:- Legrand / Havells / L&T / ABB

Supply, laying, jointing, testing and commissioning 1100 volt grade heavy duty, insulated LT under ground cable, sheathed, as per IS- 7098 (Part I) 1988, galvanized steel strip armoured heavy duty multi solid aluminum conductor laid in trenches / passed through pipe/duct road crossing, fixed on poles/ wall with clamps made out of mild steel flat iron including fixing accessories like brass cable glands double compression type, lugs, nuts, bolts, washers etc of size 2 core 10 sqmm complete all as specified and directed

Supply only water proofing compound, complete all as specified & as directed .

Note for all above items:- All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

M/S KAUTILYA GARG

Jai Doulat Construction Co

BEYLIM INFRA