C/O Health Center Building at Suan Tehsil Jaisinghpur Distt. Kangra HP

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains etc. in all kind of soil (not exceeding 1.5 m (one point five Metre) in width or 10 Per Square Metre (ten square Metre) on plan), including dressing of sides and ramming of bottoms, lift upto any height, including getting out the excavated soil and disposal of surplus excavated soil asdirected, within a lead from the edge of excavation . All kind of soil complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetera upto any thickness including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Beams, cantilever, girders and lintels. Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto all depth and in all heights including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls up to all width and heights including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimeter) thick welded with angle iron frame 30 X 30 X 5 mm (thirty into thirty into five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etcetera with wooden battens and ballies, in all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Stairs, (excluding landings) except spiral-staircasesup to all width and heights including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement: six sand: twelve graded crushed/broken stone aggregate 40mm nominal size and curing complete, excluding cost of form work in foundation and plinth including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (Fifteen Degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (One cement : one point five coarse sand : Three graded stone aggregate 20 mm (Twenty Millimetre) nominal size) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Steel reinforcement TATA TISCO/SAIL for reinforced cement concrete work including strengthening, cutting, bending, binding and placing in position complete and binding all complete avobe plinth level TMT bar grade Fe-500 including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (Non Modular) bricks of class designation 7.50 in cement mortar 1:6 (one cement isto six sand) in Super Structure as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Half Brick masonry with common burnt clay F.P.S. (Non Modular) bricks of class designation 7.50 in cement mortar 1:4 (one cement isto four sand) in Super Structure as per PWD specification. The rates are inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (one cement : six coarse sand : twelve graded stone aggregate 20 mm (Twenty millimetre) nominal size) upto plinth level with :Cement mortar 1:6 ( one cement : Six coarse sand) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (one cement : six coarse sand) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing angle iron door , windows, clerestory window frame (Single rebate) manufactured from M.S. angle iron section of 40x40x5mm(forty into forty into five millimetre) and M.S flat 50x4mm ( Fifty into four millimetre) in combination as per drawing and design including hinges jamb, lock jamb, beed and if required angle threshold of mild steel angle 50x25 mm (Fifty into twenty five millimetre) welded or rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel but hinges 2.5 mm (Two decimal five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by the Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge including carriage of materials within all leads and lifts and other incidentals .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

30 mm (thirty millimetre thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm (sixty into thirty millimetre)and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint atthe corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steelscrews. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm (twenty five into twenty millimetre) and 1 mm (± 0.1 mm) wallthickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as permanufacturer's specification and direction of Engineer-in-charge.including carriage of materials within all leads and lifts and other incidentals .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S. channels for doors, windows, frames manufactured from M.S. section 40mmx75mmx4mm (forty into seventy five into four millimetre) with M.S. flat 75mmx4mm (Seventy five into four millimetre) in combination as per drawing and design including hinges, jamb, lock jamb beed and if required thrashold i/c thrashold of M.S. angles means lugs, with split and tails to each jamb including iron butt hinges 2.5mm (two point five millimetre) thick with a provision of locking arrangement and shock observers as specified and applying a coat of approved steel primer after pre-treatment of the surface including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing flush door shutter interior grade commercial type core of black board construction with frame of Ist class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutter 35 mm (thirty five millimetr) thick including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 25 mm(twenty five millimetre) thick water proof termite resistant commercial board of confirming ply wood of ACTION TESA/ Green ply and 19mm (Nineteen millimetres) thick water proof commercial board in shelves and shutter, the back side of cupboard /cabnit shall be finished with 8 mm thick preliminated MDF board and all the cut portion of shelves shall be finished with 1 mm thick pre-lamination/4 mm thick veneer pasted over shutter to be polished. all internal surface of cup board shall be laminated with 1 mm mica of approved shade. All cut portion of shelves shall be finished with 6mm thick hard wood edging. The shutter of cup board from all sides shall be finished with 6mm /12 mm hard wood edging including piano hinges and magnetic catcher with in all accessories etctera complete as per specifications, approved drawing, design or as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints, vented and welded with 16mmx3.15mm lugs (sixteen into three point one five millimetre) 10cm (ten centimetre) long embedded in cement concrete block 15cmx10cmx10cm (fifteen centimeter into ten centimeter into ten centimeter) size of 1:3:6 (one isto three isto six) 20mm (twenty millimetre) nominal size or with wooden and screws of rawl plugs and screws or with fixing clips or with belts and nuts as required and iron fittings including providing and fixing of glass pans with glazing clips and special metal sesh butt of approved make complete including applying a priming coat of red lead paint including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Fixed steel Windows

Top Hung Ventilator

Providing and fixing factory made double steel shutter side hungs ( one glazed and one wire gauge)of standred rolled steel sections, jointing mitered welded with manufactured to relevant ISI standard specification with steel plugs and screws or rawl plugs screws or with fixing clips or with bolts and nuts as required and iron fitting i/c providing and fixing glass pans with special putty of glazed side of shutter and wire gauge of IS designation 85G with metal beading on other side complete i/c priming coat of red lead paint including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S. grills of required pattern in steel frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminum sliding door bolts, ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etctera complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

300 x16 mm (three hundred into sixteen millimetre)

250x16 mm (Two hundred fifty into sixteen millimetre)

Providing and fixing aluminum tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm (Two hundred fifty into ten millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing aluminum handles, ISI marked,anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

125mm (one hundred twenty five millimetre)

Providing and fixing oxidized M.S. casement stays (straight peg type) 200mm (Two hundred millimetre) weighining not less than 120 gms one hundred twenty gram) with necessary screws etc. complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete 20 mm dia and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying double charge vitrified floor tiles in sizes 600x600 mm (six hundred into six hundred millimetre) (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 (three point three) Per Kilogram/ Per Square Metre including grouting the joints with white cement and matching pigments etctera complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying double charge Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm (twelve millimetre ) thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 (three point three) Per Kilogram/ Per Square Metre including grouting the joint with white cement & matching pigments etc. complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (three hundred into three hundred millimetre) (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 (three point three) Per Kilogram/Per Square Metre including pointing the joints with white cement and matching pigment etc., complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying Ceramic glazed floor tiles skirting in different sizes 300x450/300x600 mm (three hundred into four hundred fifty/ threehundred into six hundred millimetre) (thickness to be specified by the manufacturer) with water absorption 0.08% and conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick cement mortar 1:4 (one Cement : four Coarse sand), Jointing with grey cement slurry @ 3.3 (three point three) Per Kilogram/Per Square Metre including pointing the joints with white cement and matching pigment etc., complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm (eighteen millimetre) thick stone slab over 20 mm (Twenty millimetre) average thick base of cement mortar 1:4 (one cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing pre-painted sheet roofing of kotar metal single skin trapezoidal 10 (ten) refitted sheeting 0.60mm (zero point six zero millimetre ) thickness having 1060mm (one thousand sixty millimetre) cover width cover all width 1126mm, 28mm crest depth at 353mm (three hundred fifty three millimetre) 2.50mm (two decimal fifty millimetre) the main crest with at top 25mm (twenty five millimetre) and at lower 81mm ( eighty one millimetre) base metal of coil rolled steel coil with zinc waiting top coat with regular modified polyesters coating of approved shade and balancing reverse coat 5.5mm (five decimal five millimetre) dia and 55mm (fifty five millimetre) length with EPDM seal complete in all respect including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing pre-painted sheet ridge or hips 60cm (sixty centimetre) over all of kotar metal skin trapezoidal profiled sheeting 0.60mm (zero point six zero millimetre )cover with over all width 1126mm (one thousand one hundred twenty six) 28mm (twenty eight) crest depth at 353mm (three hundred fifty three) 2mm (two millimetre) C/C crest distance. There will be two ribs at the centre for stiffening heaving crest depth of 2.5mm (two decimal five millimetre) the main crest with at top zinc waiting top coat with regular modified polyester coating of approved shade and balancing reverse coat 5.5mm (five decimal five millimetre) dia and 550mm (five hundred fifty millimetre) length with DPDM seal complete in all respect as per approved drawing design including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing valley 90cm (Ninety centimetre) over all of Tata Dura shine with 0.60mm (Zero decimal Six zero millimeters) thick pre-painted steel sheet of Tata / Shakti having proper gola with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RMP) organic coating of 20 (twenty) microns over 5 (Five) microns primer coating to back coat back coat of polyester of 5 (Five) microrns over 5 (Five) microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts with EDPM seal. the metal sapply will be accompanied by test by certificate & 20 years warrenty from company against the corrosion fading of colour & manufacture defect as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing M.S. ( Mild Steel) B.P. sheet 2.00 mm (two millimeter) thick in eaves boards/facia/soffits /ceiling including cutting, fixing, jointing with gas/electric welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured and laid for separately) as per specifications, approved drawing , design, as per the entire satisfaction and direction of the Engineer-In-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing 15 cm (fifteen centimetre) wide, 45 cm (forty five centimetre) overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm (zero point six three millimetre) thick with zinc coating not less than 275 gm/m² (two hundred seventy five gram per square metre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( Ten millimetre) gap for thermal expansion, (i) Single socketed pipes. 110 mm (one hundred ten millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( Ten millimetre) gap for thermal expansion. Bend 110 mm (one hundred ten millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Shoe 110 mm (one hundred ten millimetre)

Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm ten into ten intoten centimetre) of 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre ) nominal size) and cost of cutting holes and making good the walls etc. 100 mm (one hundred millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 600x600x16 mm (six hundred into six hundred into sixteen millimetre) Dune RH99 tiles armstrong ceiling of approved quality excluding cost prepainted GI channel framing @ 60 mm c/c including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

15mm (fifteen millimetre) cement plaster in single coat on rough side of brick/ stone masonry for interior plastering upto floor two level with CM 1:6 (One cement : Six sand) carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

15mm (fifteen millimetre) cement plaster in single coat on fair side of brick/ stone masonry for interior plastering upto floor two level with CM 1:6 (One cement :six sand) carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

15mm (fifteen millimetre) cement plaster in single coat on fair side of brick/ stone masonry for interior plastering upto floor two level with CM 1:5 (One cement :five sand) carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surfaceWater thinnable cement primer and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Finishing Wall painting with acrylic emulsion paint of approvedbrand and manufacture to give an even shade Two or more coats on new work and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Wall painting with acrylic washable emulsion paint of approved brand and manufacture to give an even shade interior and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing railing for stair case having baluster of 35mm (thirty five millimetre) dia SST pipe welded 50 mm (fifty millimetre) dia SST pipe with a clear height of 85 cm(eighty five centimetre) @ 60 cm (sixty centimetre) center to center emended in cement concrete step and jointing with electric/gas welding at top along with hand rail of hollow SST pipe of 50 mm dia slip resistance vertical baluste welding/jointed with each other with 2 Nos SST pipe of 20x20 mm (twenty into twenty millimetre) complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing white vitreous china pedestal star white/snow white shade of Cera / Hindware/jaquar type water closet (European type W.C. pan) with seat and lid, 10 (ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :W.C. pan with ISI marked white solid plastic seat and lid including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing wash basin star white/snow white shade of Cera / Hindware/jaquar with C.I. brackets, 15 mm (fifteen millimetre) C.P. brass pillar taps, 32 mm ( thirty two millimetre) C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm (six hundred thirty into four hundred fifty millimetre) with a single 15 mm (fifteen millimetre) C.P. brass pillar tap including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 32 mm (thirty two millimetre) dia P.V.C. waste pipe of Supreme/finolex/prince for sink or wash basin including P.V.C. waste fittings complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetre) dia CP iron grating of Jal/Jaguar /ESS-ESS (Heavy duty makes ISI marked ) for gully / floor or Nahni trap including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 600x450 mm (six hundred into four hundred fifty millimetre) beveled edge mirror superior glass of Atul/Modi Gaurd (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing PTMT towel rail of Jal/Jaquar/ ESS ESS / cera/ hindware complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm (six hundred millimetre) long towel rail with total length of 645 mm (six hundred forty five millimetre) , width 78 mm (seventy eight millimetre) and effective height of 88 mm (eighty eight millimetre), weighing not less than 190 gms (one hundred ninety grams) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 600x120x5 mm (six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodized aluminum angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm (forty millimetre) long screws, rawl plugs etc.,complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing chromium plated brass soap dish of of hindware/cera/Jal / Jaquar/ ESS ESS or contra with C.P. brass brackets fixed to wooden cleats with C.P. brass screws including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 15mm (fifteen millimetre) diameters C.P. brass long nose bib cock of Jal/Cera/Hindware/Jaquar or equivalent single control including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing brass stop cock (concealed) of standred design and app. F-330043 of Jal/Cera/Hindware/Jaquar approved quality 15mm (fifteen millimetre) including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing uplasticised PVC connection pipe with brass unions 450 mm (four hundred fifty millimetre) length 15mm (fifteen millimetre) nominal bore including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing wall mixer F-330019 of HINDWARE 15 mm Jaquar or equivalent including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing wash basin mixer F-330014 of HINDWARE 15 mm Jaquar or equivalent including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing heavy quality stainless steel kitchen sink with C.I. or M.S. brackets painted white i/c cutting holes and making good the same including fitting 600 x 450 X 150mm (six hundred into four hundred fifty into one hundred fifty millimetre) including entire carriage of materials within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing Sink mixer F-330023 of HINDWARE 15 mm Jaquar or equivalent including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, 1000 (one thousand ) liter IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer in charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

1216 (16 mm OD) pipe

1620 (20 mm OD) pipe

Providing and fixing 20 mm (twenty millimetre) dia G.I. pipes complete with G.I. Fittings including trenching and refilling etc. including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Excavation in drains and channels etcetera in earth work in all kind of classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting and work doing in saturated soil including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil, including shoring, strutting de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any qantum of water including slush which may arise during de-watering or removal of slush, lift outo any heights, stacking the excavation soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per H.P.P.W.D specification approved drawing , design, as per the entire satsifaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Providing and laying cement concrete 1:5:10 (1 Cement : 5 Sand : 10 graded stone aggregate 40mm nominal size ) bedding for stoneware pipes of the 150mm internal diameters, necessary form work and curing complete as per H.P.P.W.D specification, approved drawing , design, as per the entire satisfaction and direction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, GST and all type of other taxes imposed by the Government.

Providing and fixing high pressure PVC spigot of supreme / Finolex / Prince class "B" conforming to BS-13592 soil, waste and ventilating pipes ISI marked i/c fixing with approved adhesive etc. complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

75 mm (seventy five millimetre) Dia

110 mm (one hundred ten millimetre) Dia

150 mm (one hundred fifty millimetre) Dia

Providing and fixing PVC Single Equal Branch of Supreme / Finolex / Prince ISI marked with oval asses ISI Marked insertion rubber washer 3 mm (three millimetre) thick bolt and nuts complete i/c fixing with approved adhesive etc. Complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. .The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

75 mm (seventy five millimetre) Dia

110 mm (one hundred ten millimetre) Dia

Providing and fixing PVC floor trap of Supreme/ prince/ Finolex ISI marked of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor etc. Complete including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge.The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

Constructing masonry Chamber 90x90x100 cm ( ninety into ninety into one hundred centimetre) inside, in brick work in cement mortar 1:4 (one cement : four coarse sand) for sluice valve, with C.I. surface box 100mm (one hundred millimetre) top diameter, 160 mm (one hundred sixty millimetre) bottom diameter and 180 mm (one hundred eighty millimetre) deep ( inside) with chained lid and RCC top slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20mm (twenty millimetre) nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (one cement : five fine sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12 mm (twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design : including carriage of material in all leads and lifts and other incidentals complete and as per the entire satisfaction and direction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, toll tax, GST and all type of other taxes imposed by the Government.

parveen kumar

SURESH KUMAR KALOTRA

chander pal rihal

SAVITA KUMARI